15-T-0037.pdf

W81G6750161518

The contractor shall provide all plant, labor and material to repair bent w ebs and f langes of the vertical miter girder member through heat straightening on the dow nstream intermediate w all miter gate at lock and dam 5a. This solicitation is being posted w ith a 100% small business set-aside under the NAICS code 238120 w ith a size standard of $15 Million. The estimated magnitude of this contract is betw een $25,000-$100,000.

JESSE L ONKKA 651-290-5444

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS

NEGOTIATED

22-Jan-2015

(RFP)

(IFB)

CALL:

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

See Item 7

2. TYPE OF SOLICITATION

SEALED BID

3. DATE ISSUED

9. FOR INFORMATION A. NAME

SOLICITATION

X

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442 (REV. 4-85)

Prescribed by GSA

FAR (48 CFR) 53.236-1(e)

11. The Contractor shall begin performance w ithin _______5 calendar days and complete it w ithin ________ calendar days after receiving aw ard, notice to proceed. This performance period is X mandatory, negotiable. (See _________________________52.211-10Alt1

12 A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

X YES NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and __________1 copies to perform the w ork required are due at the place specified in Item 8 by ___________ local time ______________30 Jan 2015 (date). If this is a sealed bid solicitation, offers must be publicly opened at that time.

shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

B. An offer guarantee is, X is not required.

C. All offers are subject to the (1) w ork requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than _______30 calendar days for Government acceptance after the date offers are due w ill not be considered and w ill be rejected.

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NO.

7. ISSUED BY CODE

CONTRACTING DIVISION

USACE - ST PAUL

180 5TH STREET EAST

SUITE 700

ST. PAUL MN 55101-1678

W912ES

PAGE OF PAGES

1 OF

CODE

(Title, identifying no., date):

12B. CALENDAR DAYS

11:00 AM (hour)

Sealed envelopes containing offers

5. REQUISITION/PURCHASE REQUEST NO. 6. PROJECT NO.

8. ADDRESS OFFER TO (If Other Than Item 7)

FAX:TEL: TEL: FAX:

W912ES-15-T-0037 112

20B. SIGNATURE

(REV. 4-85)STANDARD FORM 1442 BACK

TO SIGN

NSN 7540-01-155-3212

SOLICITATION, OFFER, AND AWARD (Continued) (Construction, Alteration, or Repair)

CODE FACILITY CODE

17. The offeror agrees to perform the w ork required at the prices specif ied below in strict accordance w ith the terms of this solicitation, if this offer is accepted by the Government in w riting w ithin ________ calendar days after the date offers are due.

the minimum requirements stated in Item 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.)

AMOUNTS SEE SCHEDULE OF PRICES

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

(4 copies unless otherwise specified)

CODE

(Insert any number equal to or greater than

20C. OFFER DATE

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) 41 U.S.C. 253(c)

CODE27. PAYMENT WILL BE MADE BY:26. ADMINISTERED BY

(Include ZIP Code)14. NAME AND ADDRESS OF OFFEROR 15. TELEPHONE NO. (Include area code)

See Item 14

(Include only if different than Item 14)16. REMITTANCE ADDRESS

30B. SIGNATURE

29. AWARD (Contractor is not required to sign this document.)

document and return _______ copies to issuing office.) Contractor agrees Your of f er on this solicitation, is hereby accepted as to the items listed. This award con-to f urnish and deliv er all items or perf orm all work, requisitions identif ied summates the contract, which consists of (a) the Gov ernment solicitation and on this f orm and any continuation sheets f or the consideration stated in this y our of f er, and (b) this contract award. No f urther contractual document is contract. The rights and obligations of the parties to this contract shall be necessary .

gov erned by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certif ications, and specif ications or incorporated by ref er-ence in or attached to this contract.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED 31A. NAME OF CONTRACTING OFFICER (Type or print)

30C. DATE

(Type or print)

TEL: EMAIL:

31B. UNITED STATES OF AMERICA 31C. AWARD DATE

BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this28. NEGOTIATED AGREEMENT

(M ust be fully completed by offeror)OFFER

W912ES-15-T-0037

Section 00010 - Solicitation Contract Form

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job

HEAT STRAIGHTENING-F14155-L/D 5A-DWTR-SU

FFP

PPLY CONTRACTS [332310] --- PROJECT NO.: 332310

FOB: Destination

MILSTRIP: W81G6750161518

PURCHASE REQUEST NUMBER: W81G6750161518

NET AMT

SCOPE OF WORK

Lock and Dam 5A Miter Gate Repair by Heat Straightening

Scope of Work

1. General. The contractor shall provide all plant, labor and material to repair bent webs and flanges of the vertical miter girder member through heat straightening.

2. Repair Areas. The downstream intermediate wall miter gate was damaged as the result of a tow boat impact several years ago. The miter girder (last girder towards the centerline of the lock chamber) was left with an approximate four inch permanent distortion toward the lock wall on the upstream side of the member. This distortion is limited to approximately the top 8 feet of the member directly under the top horizontal girder. This permanent deflection does not allow the miter contact blocks to meet as intended. The miter girder is a built up member made up of 3/8 inch thick web plate and L 6 x 4 x ½ flange angles. These components are riveted together. See attached photographs and as‐built drawings.

They are comprised of 1930s vintage ASTM A 7 steel. Required yield strength was specified as 33,000 pounds per square inch. See attached as‐built drawing and damage photos.

3. Required Relevant Experience. The Contractor shall have at least 10 years experience in conducting heat straightening repairs for damaged steel structures. During the preceding three year period, the Contractor shall have conducted an average of at least five heat straightening projects per year. The personnel conducting the heat straightening must have a minimum of 5 years experience on heat straightening projects. Experience documentation shall include: date of project, location, bridge owner, number and type of members straightened, and duration of the project.

4. Equipment.

a. Heating shall be with an oxygen‐fuel combination. The fuel provided will be acetylene.

b. Heat application shall be by single or multiple orifice tips only. The size of the tips shall be proportional to the thickness of the heated material. As a guide, the tip sizes shown in the table below are recommended. No cutting torch heads are permitted.

c. Jacks, come‐alongs or other force application devices shall be gauged and calibrated so that the force exerted by the device may be controlled and measured. No external force shall be applied to the structure by the Contractor unless it is measured.

5. Damage Assessment.

a. Suspected areas of cracking shall be called to the attention of the Government before any testing or work is performed.

6. Heat Application.

a. The temperature of the steel during heat straightening shall not exceed 1100 degrees Fahrenheit.

b. The Contractor shall use one or more of the following methods for routine, ongoing documented temperature verification during heat straightening: Temperature sensitive crayons, Pyrometer, or Infrared non‐contact thermometer.

c. Material should be heated in a single pass and allowed to cool to below 250 degrees Fahrenheit prior to re‐heating.

d. Vee heats shall be shifted over the yield zone on successive heating cycles.

e. Simultaneous vee heats may be used provided that the clear spacing between vees is greater than the width of the plate element.

f. Repair of previously heat straightened members in the same region of damage may be conducted once. Further repairs of previously heat straightened members will not be conducted unless approved by the Government.

7. Application of Jacking Forces.

a. Jacks shall be placed so that forces are relieved as straightening occurs during cooling.

8. Field Supervision of Repair.

a. Heating temperatures shall be routinely monitored to ensure compliance with specified limits.

9. Tolerances.

a. The dimensions of heat straightened structural members shall conform to the tolerances specified in the following table except as noted in paragraph 8. b.

Member Type Minimum Tolerance

Beams, Truss members, or Columns Overall At Impact Point

½ inch over 20 ft ¾ inch over 20 ft

Local Web Deviations d/100 but not less than ¼ inch

Local Flange Deviations b/100 but not less than ¼ inch d is the depth of the member, b is the width of the flange

Steel Thickness (in) Orifice Type Size

< 1/4 Single 3

3/8 Single 4

1/2 Single 5

5/8 Single 7

3/4 Single 8

1 Single Rosebud

2 Single Rosebud

b. Relaxation of the tolerance limits will be at the discretion of the Government based on one or more of the following conditions: Type and location of damage in the member or degree of restoration required to restore structural integrity.

10. Lock and Dam 5A Location and Lockmaster.

Mr. Mark Beseler, Lockmaster W679 State Highway 35 Fountain City, WI 54629‐7214

507.452.2789

11. Government Technical Point of Contact.

Ms. Elizabeth (Beth) Killian, P.E.

180 5th Street East St. Paul, MN 55101 651.290.5710

651.245.3802 (cell)

12. Government Provided Equipment, Personnel, and Services.

a. The Government shall provide an aerial lift sufficient to accommodate the contractor’s crew and tools. The Government will provide the operator for the aerial lift. The aerial lift and operator shall be made available for up to three work days. Use of the aerial lift and operator is restricted to regular duty work hours during the work week. It may not be used on federal holidays or weekends.

b. The Government shall provide a means to transport the contractor’s materials between the parking lot and the lock chamber.

c. The Government shall provide crane support to place the contractor’s tools and equipment on the aerial lift in the lock chamber. Use of the crane and operator is restricted to regular duty work hours during the work week. It may not be used on federal holidays or weekends.

d. The Government Technical Point of Contact shall be on site during the heat straightening operation to offer any technical assistance/ approvals necessary to complete the work.

e. The Government shall provide sufficient oxygen and acetylene gas to complete the repairs described in this scope of work.

f. The Government shall provide jacking brackets per the contractor’s submitted sketch at the contractors specified locations. The jacking brackets requested by the contractor shall be limited to an eight inch by ¾” thick angle (L8”x6”x ¾”) with gussets welded for support. The bracket may only remove 3 rivets at a time when attaching to the gate. The bracket may be repositioned as needed limiting the removal of rivets to 3 at a time.

13. Site Visit. The Government will provide a site visit during regular duty work hours during the work week. It may not be requested on a federal holiday or weekend.

14. Schedule. The Contractor shall complete all work to straighten the bent webs and flanges of the vertical miter girder member as shown in the attached photos no later than 1 March 2015.

15. Coordination. The Contractor shall coordinate with the Lockmaster and Government Technical Point of Contact a minimum of five (5) work days prior to the scheduled start date to ensure all necessary arrangements for access, operators and removal of rivets have been made. If the contractor will need special jacking brackets installed, due to the repair location, the contractor shall provide the Government Technical Point of Contact the required location, a sketch of the brace and the material thicknesses to jack against a minimum of seven (7) work days prior to the scheduled start date to ensure fabrication and installation prior to the contractors arrival.

16. Submittals. All submittals shall be sent to the Government Technical Point of Contact. Electronic submission of required documentation is acceptable. At least three business days shall be allowed for review unless noted otherwise. All submittals are for Government Approval.

a. Relevant Experience. Description of previous relevant experience as noted above in paragraph 2. This submittal is required within five (5) calendar days of contract award.

b. Equipment Description. Provide a description of tools, equipment, and personnel to be placed in the aerial lift, to include weight and area. The weights of all equipment over 100 pounds must be provided to ensure the Government provides an aerial lift capable of accommodating the contractor’s personnel and equipment. This submittal is required within five (5) calendar days of contract award.

c. Calibration.

(i) Documentation showing electronic temperature measuring devices have been calibrated within the previous year shall be submitted within 7 calendar days of contract award.

d. Schedule. A schedule showing starting date and estimated ending date shall be submitted within 7 calendar days of contract award.

Attachments:

Photographs 1, 2, 3, and 4 As‐Built Drawings:

M‐L5A‐21‐1 27 Foot Miter Gate General Drawing M‐L5A‐21‐4 Details of Girders

WAGE RATES

General Decision Number: WI150015 01/16/2015 WI15

Superseded General Decision Number: WI20140015

State: Wisconsin

Construction Type: Heavy

Counties: Wisconsin Statewide.

HEAVY CONSTRUCTION PROJECTS (Excluding Tunnel, Sewer, and Water Lines).

Note: Executive Order (EO) 13658 establishes an hourly minimum wage of $10.10 for 2015 that applies to all contracts subject to the Davis-Bacon Act for which the solicitation is issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.10 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/02/2015

1 01/16/2015

BOIL0107-001 01/01/2013

Rates Fringes

BOILERMAKER

Boilermaker.................$ 31.09 27.11 Small Boiler Repair (under 25,000 lbs/hr)..............$ 26.91 16.00

BRWI0001-002 06/01/2013

CRAWFORD, JACKSON, JUNEAU, LA CROSSE, MONROE, TREMPEALEAU, AND

VERNON COUNTIES

Rates Fringes

BRICKLAYER.......................$ 35.94 17.05

BRWI0002-002 06/01/2013

ASHLAND, BAYFIELD, DOUGLAS, AND IRON COUNTIES

Rates Fringes

BRICKLAYER.......................$ 35.94 17.05

BRWI0002-005 06/01/2013

ADAMS, ASHLAND, BARRON, BROWN, BURNETT, CALUMET, CHIPPEWA,

CLARK, COLUMBIA, DODGE, DOOR, DUNN, FLORENCE, FOND DU LAC,

FOREST, GREEN LAKE, IRON, JEFFERSON, KEWAUNEE, LANGLADE,

LINCOLN, MANITOWOC, MARATHON, MARINETTE, MARQUETTE, MENOMINEE,

OCONTO, ONEIDA, OUTAGAMIE, POLK, PORTAGE, RUSK, ST CROIX, SAUK,

SHAWANO, SHEBOYGAN, TAYLOR, VILAS, WALWORTH, WAUPACA, WAUSHARA,

WINNEBAGO, AND WOOD COUNTIES

CEMENT MASON/CONCRETE FINISHER...$ 32.65 17.44

BRWI0003-002 06/01/2013

BROWN, DOOR, FLORENCE, KEWAUNEE, MARINETTE, AND OCONTO COUNTIES

Rates Fringes

BRICKLAYER.......................$ 30.85 17.85

BRWI0004-002 06/01/2013

KENOSHA, RACINE, AND WALWORTH COUNTIES

BRICKLAYER.......................$ 35.10 18.58

BRWI0006-002 06/01/2013

ADAMS, CLARK, FOREST, LANGLADE, LINCOLN, MARATHON, MENOMINEE,

ONEIDA, PORTAGE, PRICE, TAYLOR, VILAS AND WOOD COUNTIES

BRICKLAYER.......................$ 32.14 16.56

BRWI0007-002 06/01/2013

GREEN, LAFAYETTE, AND ROCK COUNTIES

Rates Fringes

BRICKLAYER.......................$ 32.14 18.25

BRWI0008-002 06/01/2013

MILWAUKEE, OZAUKEE, WASHINGTON, AND WAUKESHA COUNTIES

Rates Fringes

BRICKLAYER.......................$ 35.37 18.47

BRWI0009-001 06/01/2012

GREEN LAKE, MARQUETTE, OUTAGAMIE, SHAWANO, WAUPACA, WASHARA,

AND WINNEBAGO COUNTIES

BRICKLAYER.......................$ 30.77 16.62

BRWI0011-002 06/01/2012

CALUMET, FOND DU LAC, MANITOWOC, AND SHEBOYGAN COUNTIES

Rates Fringes

BRICKLAYER.......................$ 30.77 16.62

BRWI0013-002 06/01/2012

DANE, GRANT, IOWA, AND RICHLAND COUNTIES

Rates Fringes

BRICKLAYER.......................$ 32.01 17.05

BRWI0019-002 06/01/2012

BARRON, BUFFALO, BURNETT, CHIPPEWA, DUNN, EAU CLAIRE, PEPIN,

PIERCE, POLK, RUSK, ST. CROIX, SAWYER AND WASHBURN COUNTIES

BRICKLAYER.......................$ 30.42 16.97

BRWI0021-002 06/01/2012

DODGE AND JEFFERSON COUNTIES

Rates Fringes

BRICKLAYER.......................$ 32.56 16.52

BRWI0034-002 06/01/2013

COLUMBIA AND SAUK COUNTIES

Rates Fringes

BRICKLAYER.......................$ 32.28 18.10

CARP0087-001 07/01/2012

BURNETT (W. of Hwy 48), PIERCE (W. of Hwy 29), POLK (W. of Hwys 35, 48 & 65), AND ST. CROIX (W. of Hwy 65) COUNTIES

Carpenter & Piledrivermen........$ 33.34 16.73

CARP0252-002 07/02/2012

ADAMS, BARRON, BAYFIELD (Eastern 2/3), BROWN, BUFFALO, BURNETT (E. of Hwy 48), CALUMET, CHIPPEWA, CLARK, COLUMBIA, CRAWFORD, DANE, DODGE, DOOR, DUNN, EAU CLAIRE, FLORENCE (except area bordering Michigan State Line), FOND DU LAC, FOREST, GRANT, GREEN, GREEN LAKE, IOWA, IRON, JACKSON, JEFFERSON, JUNEAU, KEWAUNEE, LA CROSSE, LAFAYETTE, LANGLADE, LINCOLN, MANITOWOC, MARATHON, MARINETTE (except N.E. corner), MARQUETTE, MENOMINEE, MONROE, OCONTO, ONEIDA, OUTAGAMIE, PEPIN, PIERCE (E.

of Hwys 29 & 65), POLK (E. of Hwys 35, 48 & 65), PORTAGE, PRICE, RICHLAND, ROCK, RUSK, SAUK, SAWYER, SHAWANO, SHEBOYGAN, ST CROIX (E. of Hwy 65), TAYLOR, TREMPEALEAU, VERNON, VILAS, WALWORTH, WASHBURN, WAUPACA, WAUSHARA, WINNEBAGO, AND WOOD

COUNTIES

CARPENTER

CARPENTER...................$ 30.48 15.80

MILLWRIGHT..................$ 32.11 15.80

PILEDRIVER..................$ 30.98 15.80

CARP0252-010 07/02/2012

ASHLAND COUNTY

Carpenters Carpenter...................$ 30.48 15.80 Millwright..................$ 32.11 15.80 Pile Driver.................$ 30.98 15.80

CARP0264-003 06/01/2008

KENOSHA, MILWAUKEE, OZAUKEE, RACINE, WAUKESHA, AND WASHINGTON

CARPENTER........................$ 30.52 14.41

CARP0361-004 07/11/2011

BAYFIELD (West of Hwy 63) AND DOUGLAS COUNTIES

Rates Fringes

CARPENTER........................$ 31.07 15.80

CARP2337-001 06/01/2008

ZONE A: MILWAUKEE, OZAUKEE, WAUKESHA AND WASHINGTON

ZONE B: KENOSHA & RACINE

PILEDRIVERMAN

Zone A......................$ 27.25 19.46 Zone B......................$ 24.47 19.46

CARP2337-003 06/02/2008

Rates Fringes

MILLWRIGHT

Zone A......................$ 27.92 19.08 Zone B......................$ 26.82 19.08

ZONE DEFINITIONS

ZONE A: MILWAUKEE, OZAUKEE, WAUKESHA AND WASHINGTON COUNTIES

ZONE B: KENOSHA & RACINE COUNTIES

ELEC0014-002 06/01/2014

ASHLAND, BARRON, BAYFIELD, BUFFALO, BURNETT, CHIPPEWA, CLARK

(except Maryville, Colby, Unity, Sherman, Fremont, Lynn & Sherwood), CRAWFORD, DUNN, EAU CLAIRE, GRANT, IRON, JACKSON, LA

CROSSE, MONROE, PEPIN, PIERCE, POLK, PRICE, RICHLAND, RUSK, ST

CROIX, SAWYER, TAYLOR, TREMPEALEAU, VERNON, AND WASHBURN

Electricians:....................$ 30.59 18.43

ELEC0014-007 06/01/2014

REMAINING COUNTIES

Rates Fringes

Teledata System Installer Installer/Technician........$ 22.50 12.72

Low voltage construction, installation, maintenance and removal of teledata facilities (voice, data, and video) including outside plant, telephone and data inside wire, interconnect, terminal equipment, central offices, PABX, fiber optic cable and equipment, micro waves, V-SAT, bypass, CATV, WAN (wide area networks), LAN (local area networks), and ISDN (integrated systems digital network).

ELEC0127-002 06/01/2012

KENOSHA COUNTY

Rates Fringes

Electricians:....................$ 35.25 19.30

* ELEC0158-002 06/02/2014

BROWN, DOOR, KEWAUNEE, MANITOWOC (except Schleswig), MARINETTE(Wausuakee and area South thereof), OCONTO, MENOMINEE (East of a ine 6 miles West of the West boundary of Oconto County), SHAWANO (Except Area North of Townships of Aniwa and Hutchins) COUNTIES

Electricians:....................$ 29.32 28.50% + 9.27

ELEC0159-003 06/02/2014

COLUMBIA, DANE, DODGE (Area West of Hwy 26, except Chester and Emmet Townships), GREEN, LAKE (except Townships of Berlin, Seneca, and St. Marie), IOWA, MARQUETTE (except Townships of Neshkoka, Crystal Lake, Newton, and Springfield), and SAUK

Electricians:....................$ 34.82 19.575

ELEC0219-004 05/30/2011

FLORENCE COUNTY (Townships of Aurora, Commonwealth, Fern, Florence and Homestead) AND MARINETTE COUNTY (Township of Niagara)

Electricians:

Electrical contracts over $130,000....................$ 29.41 16.97 Electrical contracts under $130,000....................$ 26.24 16.85

ELEC0242-005 06/01/2014

DOUGLAS COUNTY

Rates Fringes

Electricians:....................$ 32.54 24.07

ELEC0388-002 06/01/2013

ADAMS, CLARK (Colby, Freemont, Lynn, Mayville, Sherman, Sherwood, Unity), FOREST, JUNEAU, LANGLADE, LINCOLN, MARATHON, MARINETTE (Beecher, Dunbar, Goodman & Pembine), MENOMINEE (Area West of a line 6 miles West of the West boundary of Oconto County), ONEIDA, PORTAGE, SHAWANO (Aniwa and Hutchins), VILAS

AND WOOD COUNTIES

Electricians:....................$ 28.96 24.85% + 9.70

ELEC0430-002 06/01/2012

RACINE COUNTY (Except Burlington Township)

Rates Fringes

Electricians:....................$ 32.87 19.23

ELEC0494-005 06/01/2014

MILWAUKEE, OZAUKEE, WASHINGTON, AND WAUKESHA COUNTIES

Rates Fringes

Electricians:....................$ 33.93 22.67

ELEC0494-006 06/01/2014

CALUMET (Township of New Holstein), DODGE (East of Hwy 26 including Chester Township), FOND DU LAC, MANITOWOC (Schleswig), and SHEBOYGAN COUNTIES

Electricians:....................$ 29.64 20.54

ELEC0494-013 06/01/2014

DODGE (East of Hwy 26 including Chester Twp, excluding Emmet Twp), FOND DU LAC (Except Waupuin), MILWAUKEE, OZAUKEE, MANITOWOC (Schleswig), WASHINGTON, AND WAUKESHA COUNTIES

Sound & Communications Installer...................$ 16.47 14.84 Technician..................$ 25.63 17.21

Installation, testing, maintenance, operation and servicing of all sound, intercom, telephone interconnect, closed circuit TV systems, radio systems, background music systems, language laboratories, electronic carillion, antenna distribution systems, clock and program systems and low-voltage systems such as visual nurse call, audio/visual nurse call systems, doctors entrance register systems.

Includes all wire and cable carrying audio, visual, data, light and radio frequency signals. Includes the installation of conduit, wiremold, or raceways in existing structures that have been occupied for six months or more where required for the protection of the wire or cable, but does not mean a complete conduit or raceway system. work covered does not include the installation of conduit, wiremold or any raceways in any new construction, or the installation of power supply outlets by means of which external electric power is supplied to any of the foregoing equipment or products

ELEC0577-003 06/02/2014

CALUMET (except Township of New Holstein), GREEN LAKE (N. part including Townships of Berlin, St Marie, and Seneca), MARQUETTE (N. part including Townships of Crystal Lake, Neshkoro, Newton, and Springfield), OUTAGAMIE, WAUPACA, WAUSHARA, AND WINNEBAGO

Electricians:....................$ 29.00 26.5%+9.15

ELEC0890-003 06/01/2014

DODGE (Emmet Township only), GREEN, JEFFERSON, LAFAYETTE, RACINE (Burlington Township), ROCK AND WALWORTH COUNTIES

Electricians:....................$ 31.10 24.95% + $10.41

ELEC0953-001 07/01/2014

Rates Fringes

Line Construction:

(1) Lineman.................$ 40.81 32% + 5.00

(2) Heavy Equipment Operator....................$ 38.77 32% + 5.00

(3) Equipment Operator......$ 32.65 32% + 5.00

(4) Heavy Groundman Driver..$ 26.78 14.11

(5) Light Groundman Driver..$ 24.86 13.45

(6) Groundsman..............$ 22.45 32% + 5.00

ENGI0139-001 06/01/2014

KENOSHA, MILWAUKEE, OZAUKEE, RACINE, WASHINGTON, AND WAUKESHA

Power Equipment Operator Group 1.....................$ 40.61 19.90 Group 2.....................$ 40.11 19.90 Group 3.....................$ 39.61 19.90 Group 4.....................$ 38.92 19.90 Group 5.....................$ 37.04 19.90 Group 6.....................$ 31.89 19.90

HAZARDOUS WASTE PREMIUMS:

EPA Level "A" Protection: $3.00 per hour EPA Level "B" Protection: $2.00 per hour EPA Level "C" Protection: $1.00 per hour

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Cranes, Tower Cranes, Pedestal Tower Cranes and Derricks with or w/o attachments with a lifting capacity of over 100 tons; or Cranes, Tower Cranes, Pedestal Tower Cranes and Derricks with boom, leads, and/or jib lengths measuring 176 feet or longer; Self-Erecting Tower Cranes over 4000 lbs lifting capacity; All Cranes with Boom Dollies; Boring Machines (directional); Master Mechanic.

$0.50 additional per hour per 100 tons or 100 ft of boom over 200 ft or lifting capacity of crane over 200 tons to a maximum of 300 tons or 300 ft. Thereafter an increase of $0.01 per ft or ton, whichever is greater.

GROUP 2: Cranes, Tower Cranes, Pedestal Tower Cranes and Derricks with or without attachments with a lifting capacity of 100 tons or less; or Cranes, Tower Cranes Portable Tower Cranes, Pedestal Tower Cranes and Derricks with boom, leadsand/or jib lengths measuring 175 feet or less; Backhoes (excavators) 130,000 lbs and over; Caisson Rigs; Pile Drivers; Boring Machines (vertical or horizontal), Versi-Lift, Tri-Lift, Gantry 20,000 lbs & over.

GROUP 3: Backhoe (excavator) under 130,000 lbs;Self-erecting Tower Crane 4000 lbs & under lifting capacity;Traveling Crane (bridge type); Skid Rigs; Dredge Operator; Mechanic;

Concrete Paver (over 27E); Concrete Spreader and Distributor; Forklift/ Telehandler (machinery- moving / steel erection); Hydro Blaster, 10,000 psi and over

GROUP 4: Material Hoists; Stack Hoists; Hydraulic Backhoe (tractor or truck mounted); Hydraulic Crane, 5 tons or under (tractor or truck mounted); Hoist (tuggers 5 tons & over); Hydro-Excavators/Daylighters; Concrete Pumps Rotec type Conveyors; Tractor/Bulldozer/End Loader (over 40 hp);

Motor Patrol; Scraper Operator; Sideboom; Straddle Carrier;

Welder; Bituminous Plant and Paver Operator; Roller over 5 tons; Rail Leveling Machine (Railroad); Tie Placer; Tie Extractor; Tie Tamper; Stone Leveler; Rotary Drill Operator and Blaster; Percussion Drill Operator; Air Track Drill and/or Hammers; Gantrys (under 20,000 lbs); Tencher (wheel type or chain type having 8 inch or larger bucket); Milling Machine; Off-Road Material Haulers.

GROUP 5: Backfiller; Concrete Auto Breaker (large); Concrete Finishing Machines (road type); Rubber Tired Roller;

Concrete Batch Hopper; Concrete Conveyor Systems; Grout Pumps; Concrete Mixers (14S or over); Screw Type Pumps and Gypsum Pumps; Tractor, Bulldozer, End Loader (under 40 hp);

Trencher (chain type, bucket under 8 inch); Industrial Locomotives; Rollers under 5 tons; Stump Grinder/Chipper (Large); Timber Equipment; Firemen (pile drivers and derricks); Personnel Hoist, Telehandler over 8000 lbs;

Robotic Tool Carrier with or without attachments

GROUP 6: Tampers - Compactors (riding type); Assistant Engineer; A-Frames and Winch Trucks; Concrete Auto Breaker;

Hydrohammers (small); Brooms and Sweepers; Hoist (tuggers under 5 tons); Boats (Tug, Safety, Work Barges, Launch);

Shouldering Machine Operator; Prestress Machines; Screed Operator; Stone Crushers and Screening Plants; Screed Operators (milling machine), Farm or Industrial Tractor Mounted Equipment; Post Hole Digger; Fireman (asphalt plants); Air Compressors over 400 CFM; Generators, over 150 KW; Augers (vertical and horizontal); Air, Electric, Hydraulic Jacks (slipform); Skid Steer Loaders (with or without attachments); Boiler Operators (temporary heat);

Refrigeration Plant/Freeze Machines; Power Pack Vibratory/Ultra Sound Drivers and Extractors; Welding Machines; Heaters (mechanical); Pumps; Winches (small electric); Oiler and Greaser; Rotary Drill Tender;

Conveyor; Forklifts/Telehandler 8000 lbs & under;

Elevators: Automatic Hoists; Pumps (well points);

Combination Small Equipment Operators

ENGI0139-003 06/01/2014

REMAINING COUNTIES

Power Equipment Operator Group 1.....................$ 37.72 20.93 Group 2.....................$ 37.22 20.93 Group 3.....................$ 36.72 20.93 Group 4.....................$ 36.46 20.93 Group 5.....................$ 36.17 20.93 Group 6.....................$ 30.27 20.93

HAZARDOUS WASTE PREMIUMS:

EPA Level "A" Protection: $3.00 per hour EPA Level "B" Protection: $2.00 per hour EPA Level "C" Protection: $1.00 per hour

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Cranes, Tower Cranes and Derricks with or without attachments with a lifting capacity of over 100 tons;

Cranes, Tower Cranes, and Derricks with boom, leads and/or jib lengths 176 ft or longer.

GROUP 2: Backhoes (Excavators) weighing 130,00 lbs and over;

Cranes, Tower Cranes and Derricks with or without attachments with a lifting capacity of 100 tons or less;

Cranes, Tower Cranes, and Derricks with boom, leads, and/or jib lengths 175 ft or less; Caisson Rigs; Pile Driver

GROUP 3: Backhoes (Excavators) weighing under 130,000 lbs;

Travelling Crane (bridge type); Milling Machine; Concrete Paver over 27 E; Concrete Spreader and Distributor;

Concrete Laser Screed; Concrete Grinder and Planing Machine; Slipform Curb and Gutter Machine; Boring Machine (Directional); Dredge Operator; Skid Rigs; over 46 meter Concrete Pump.

GROUP 4: Hydraulic Backhoe (tractor or truck mounted);

Hydraulic Crane, 10 tons or less; Tractor, Bulldozer, or End Loader (over 40 hp); Motor Patrol; Scraper Operator;

Bituminous Plant and Paver Operator; Screed-Milling Machine; Roller over 5 tons; Concrete pumps 46 meter and under; Grout Pumps; Rotec type machine; Hydro Blaster, 10,000 psi and over; Rotary Drill Operator; Percussion Drilling Machine; Air Track Drill with or without integral hammer; Blaster; Boring Machine (vertical or horizontal);

Side Boom; Trencher, wheel type or chain type having 8 inch or larger bucket; Rail Leveling Machine (Railroad); Tie Placer; Tie Extractor; Tie Tamper; Stone Leveler; Straddle Carrier; Material Hoists; Stack Hoist; Man Hoists; Mechanic and Welder; Off Road Material Haulers.

GROUP 5: Tractor, Bulldozer, or Endloader (under 40 hp);

Tampers -Compactors, riding type; Stump Chipper, large;

Roller, Rubber Tire; Backfiller; Trencher, chain type (bucket under 8 inch); Concrete Auto Breaker, large;

Concrete Finishing Machine (road type); Concrete Batch Hopper; Concrete Conveyor Systems; Concrete Mixers, 14S or over; Pumps, Screw Type and Gypsum); Hydrohammers, small;

Brooms and Sweeeprs; Lift Slab Machine; Roller under 5 tons; Industrial Locomotives; Fireman (Pile Drivers and Derricks); Pumps (well points); Hoists, automatic; A-Frames and Winch Trucks; Hoists (tuggers); Boats (Tug, Safety, Work Barges and Launches); Assistant Engineer

GROUP 6: Shouldering Machine Operator; Farm or Industrial Tractor mounted equipment; Post Hole Digger; Auger (vertical and horizontal); Skid Steer Loader with or without attachments; Robotic Tool Carrier with or without attachments; Power Pack Vibratory/Ultra Sound Driver and Extractor; Fireman (Asphalt Plants); Screed Operator; Stone Crushers and Screening Plants; Air, Electric, Hydraulic Jacks (Slip Form); Prestress Machines; Air Compressor, 400 CFM or over; Refrigeration Plant/Freese Machine; Boiler Operators (temporary heat); Forklifts; Welding Machines;

Generators; Pumps over 3"; Heaters, Mechanical; Combination small equipment operator; Winches, small electric; Oiler;

Greaser; Rotary Drill Tender; Conveyor; Elevator Operator

IRON0008-002 06/01/2013

BROWN, CALUMET, DOOR, FOND DU LAC, KEWAUNEE, MANITOWOC,

MARINETTE, OCONTO, OUTAGAMI, SHAWANO, SHEBOYGAN, AND WINNEBAGO

COUNTIES:

IRONWORKER.......................$ 28.72 23.47

Paid Holidays: New Year's Day, Memorial Day, July 4th, Labor Day, Thanksgiving Day & Christmas Day.

IRON0008-003 06/01/2013

KENOSHA, MILWAUKEE, OZAUKEE, RACINE, WALWORTH (N.E. 2/3),

WASHINGTON, AND WAUKESHA COUNTIES

IRONWORKER.......................$ 30.52 23.47

Paid Holidays: New Year's Day, Memorial Day, July 4th, Labor Day, Thanksgiving Day & Christmas Day.

IRON0383-001 06/01/2013

ADAMS, COLUMBIA, CRAWFORD, DANE, DODGE, FLORENCE, FOREST,

GRANT, GREENE, (Excluding S.E. tip), GREEN LAKE, IOWA, JEFFERSON, JUNEAU, LA CROSSE, LAFAYETTE, LANGLADE, MARATHON, MARQUETTE, MENOMINEE, MONROE, PORTAGE, RICHLAND, ROCK (Northern area, vicinity of Edgerton and Milton), SAUK, VERNON, WAUPACA, WAUSHARA, AND WOOD COUNTIES

IRONWORKER.......................$ 31.50 20.03

IRON0512-008 06/09/2013

BARRON, BUFFALO, CHIPPEWA, CLARK, DUNN, EAU CLAIRE, JACKSON,

PEPIN, PIERCE, POLK, RUSK, ST CROIX, TAYLOR, AND TREMPEALEAU

IRONWORKER.......................$ 34.15 22.05

IRON0512-021 06/09/2013

ASHLAND, BAYFIELD, BURNETT, DOUGLAS, IRON, LINCOLN, ONEIDA,

PRICE, SAWYER, VILAS AND WASHBURN COUNTIES

IRONWORKER.......................$ 29.34 22.05

LABO0113-002 06/01/2014

MILWAUKEE AND WAUKESHA COUNTIES

Rates Fringes

LABORER

Group 1.....................$ 27.06 18.73 Group 2.....................$ 27.21 18.73 Group 3.....................$ 27.41 18.73 Group 4.....................$ 27.56 18.73 Group 5.....................$ 27.71 18.73 Group 6.....................$ 23.55 18.73

LABORERS CLASSIFICATIONS

GROUP 1: General Laborer; Tree Trimmer; Conduit Layer;

Demolition and Wrecking Laborer; Guard Rail, Fence, and Bridge Builder; Landscaper; Multiplate Culvert Assembler;

Stone Handler; Bituminous Worker (Shoveler, Loader, and Utility Man); Batch Truck Dumper or Cement Handler;

Bituminous Worker (Dumper, Ironer, Smoother, and Tamper);

Concrete Handler

GROUP 2: Air Tool Operator; Joint Sawer and Filler (Pavement); Vibrator or Tamper Operator (Mechanical Hand Operated); Chain Saw Operator; Demolition Burning Torch Laborer

GROUP 3: Bituminous Worker (Raker and Luteman); Formsetter (Curb, Sidewalk, and Pavement); Strike Off Man

GROUP 4: Line and Grade Specialist

GROUP 5: Blaster and Powderman

GROUP 6: Flagperson; traffic control person

LABO0113-003 06/01/2014

OZAUKEE AND WASHINGTON COUNTIES

Rates Fringes

LABORER

Group 1.....................$ 26.31 18.75 Group 2.....................$ 26.41 18.75 Group 3.....................$ 26.46 18.75 Group 4.....................$ 26.66 18.75 Group 5.....................$ 26.51 18.75 Group 6.....................$ 23.40 18.75

LABORERS CLASSIFICATIONS

GROUP 1: General Laborer; Tree Trimmer; Conduit Layer;

Demolition and Wrecking Laborer; Guard Rail, Fence, and Bridge Builder; Landscaper; Multiplate Culvert Assembler;

Stone Handler; Bituminous Worker (Shoveler, Loader, and Utility Man); Batch Truck Dumper or Cement Handler;

Bituminous Worker (Dumper, Ironer, Smoother, and Tamper);

Concrete Handler

GROUP 2: Air Tool Operator; Joint Sawer and Filler (Pavement); Vibrator or Tamper Operator (Mechanical Hand Operated);

GROUP 3: Bituminous Worker (Raker and Luteman); Formsetter (Curb, Sidewalk, and Pavement); Strike Off Man

GROUP 4: Line and Grade Specialist

GROUP 5: Blaster; powderman

GROUP 6: Flagperson and Traffic Control Person

LABO0113-011 06/01/2014

KENOSHA AND RACINE COUNTIES

Rates Fringes

LABORER

Group 1.....................$ 26.12 18.75 Group 2.....................$ 26.27 18.75 Group 3.....................$ 26.47 18.75 Group 4.....................$ 26.44 18.75 Group 5.....................$ 26.77 18.75 Group 6.....................$ 23.26 18.75

LABORERS CLASSIFICATIONS:

GROUP 1: General laborer; Tree Trimmer; Conduit Layer;

Demolition and Wrecking Laborer; Guard Rail, Fence, and

Bridge Builder; Landscaper; Multiplate Culvert Assembler;

Stone Handler; Bituminous Worker (Shoveler, Loader, and Utility Man); Batch Truck Dumper or Cement Handler;

Bituminous worker (Dumper, Ironer, Smoother, and Tamper);

Concrete Handler

GROUP 2: Air Tool Operator; Joint Sawer and Filler (Pavement); Vibrator or Tamper Operator (Mechanical Hand Operated); Chain Saw Operator; Demolition Burning Torch Laborer

GROUP 3: Bituminous Worker (Raker and Luteman); Formsetter (Curb, Sidewalk, and Pavement); Strike Off Man

GROUP 4: Line and Grade Specialist

GROUP 5: Blaster and Powderman

GROUP 6: Flagman; traffic control person

LABO0140-002 06/01/2013

ADAMS, ASHLAND, BARRON, BAYFIELD, BROWN, BUFFALO, BURNETT,

CALUMET, CHIPPEWA, CLARK, COLUMBIA, CRAWFORD, DODGE, DOOR,

DOUGLAS, DUNN, EAU CLAIRE, FLORENCE, FOND DU LAC, FOREST,

GRANT, GREEN, GREEN LAKE, IRON, JACKSON, JUNEAU, IOWA,

JEFFERSON, KEWAUNEE, LA CROSSE, LAFAYETTE, LANGLADE, LINCOLN,

MANITOWOC, MARATHON, MARINETTE, MARQUETTE, MENOMINEE, MONROE,

OCONTO, ONEIDA, OUTAGAMIE, PEPIN, PIERCE, POLK, PORTAGE, PRICE,

RICHLAND, ROCK, RUSK, SAUK, SAWYER, SHAWANO, SHEBOYGAN, ST.

CROIX, TAYLOR, TREMPEALEAU, VERNON, VILLAS, WALWORTH, WASHBURN,

WAUPACA, WAUSHARA, WINNEBAGO, AND WOOD COUNTIES

LABORER

Group 1.....................$ 29.04 14.53 Group 2.....................$ 29.14 14.53 Group 3.....................$ 29.19 14.53 Group 4.....................$ 29.39 14.53 Group 5.....................$ 29.24 14.53 Group 6.....................$ 25.67 14.53

LABORER CLASSIFICATIONS

GROUP 1: General Laborer; Tree Trimmer; Conduit Layer;

Demolition and Wrecking Laborer; Guard Rail, Fence, and Bridge Builder; Landscaper; Multiplate Culvert Assembler;

Stone Handler; Bitminous Worker (Shoveler, Loader, and Utility Man); Batch Truck Dumper or Cement Handler;

Bituminous Worker (Dumper, Ironer, Smoother and Tamper);

Concrete Handler

GROUP 2: Air Tool Operator; Joint Sawer and Filler (Pavement); Vibrator or Tamper Operator (Mechanical Hand Operated); Chain Saw Operator, Demolition Burning Torch Laborer

GROUP 3: Bituminous Worker (Raker and Luteman); Formsetter (Curb, Sidewalk and Pavement); Strike Off Man

GROUP 4: Line and Grade Secialist

GROUP 5: Blaster; powderman

GROUP 6: Flagperson; Traffic Control

LABO0464-003 06/01/2014

DANE COUNTY

Rates Fringes

LABORER

Group 1.....................$ 30.41 15.04 Group 2.....................$ 30.51 15.04 Group 3.....................$ 30.56 15.04 Group 4.....................$ 30.76 15.04 Group 5.....................$ 30.61 15.04 Group 6.....................$ 26.76 15.04

LABORERS CLASSIFICATIONS:

GROUP 1: General Laborer; Tree Trimmer; Conduit Layer;

Demolition and Wrecking Laborer; Guard Rail, Fence, and Bridge Builder; Landscaper; Multiplate Culvert Assembler;

Stone Handler; Bituminous Worker (Shoveler, Loader, and Utility Man); Batch Truck Dumper or Cement Handler;

Bituminious Worker (Dumper, Ironer, Smoother, and Tamper);

Concrete Handler

GROUP 2: Air Tool Operator; Joint Sawer and Filler (Pavement); Vibrator or Tamper Operator (Mechanical Hand Operated); Chain Saw Operator; Demolition Burning Torch Laborer

GROUP 3: Bituminous Worker (Raker and Luteman); Formsetter (Curb, Sidewalk, and Pavement); Strike Off Man

GROUP 4: Line and Grade Specialist

GROUP 5: Blaster; Powderman

GROUP 6: Flagperson and Traffic Control Person

PAIN0106-008 05/01/2014

ASHLAND, BAYFIELD, BURNETT, AND DOUGLAS COUNTIES

Rates Fringes

Painters:

New:

Brush, Roller..............$ 28.81 15.27

Spray, Sandblast, Steel....$ 29.41 15.27 Repaint:

Brush, Roller..............$ 27.31 15.27 Spray, Sandblast, Steel....$ 27.91 15.27

PAIN0108-002 06/01/2014

RACINE COUNTY

Rates Fringes

Painters:

Brush, Roller...............$ 30.90 18.39 Spray & Sandblast...........$ 31.90 18.39

PAIN0259-002 05/01/2008

BARRON, CHIPPEWA, DUNN, EAU CLAIRE, PEPIN, PIERCE, POLK, RUSK,

SAWYER, ST. CROIX, AND WASHBURN COUNTIES

PAINTER..........................$ 24.11 12.15

PAIN0259-004 05/01/2013

BUFFALO, CRAWFORD, JACKSON, LA CROSSE, MONROE, TREMPEALEAU, AND

PAINTER..........................$ 21.15 11.53

PAIN0781-002 06/01/2013

JEFFERSON, MILWAUKEE, OZAUKEE, WASHINGTON, AND WAUKESHA COUNTIES

Rates Fringes

Painters:

Bridge......................$ 29.87 20.04 Brush.......................$ 29.52 20.04 Spray & Sandblast...........$ 30.27 20.04

PAIN0802-002 06/01/2012

COLUMBIA, DANE, DODGE, GRANT, GREEN, IOWA, LAFAYETTE, RICHLAND,

ROCK, AND SAUK COUNTIES

PAINTER

Brush.......................$ 24.50 16.27

PREMIUM PAY:

Structural Steel, Spray, Bridges = $1.00 additional per hour.

PAIN0802-003 06/01/2013

ADAMS, BROWN, CALUMET, CLARK, DOOR, FOND DU LAC, FOREST, GREEN

LAKE, IRON, JUNEAU, KEWAUNEE, LANGLADE, LINCOLN, MANITOWOC,

MARATHON, MARINETTE, MARQUETTE, MENOMINEE, OCONTO, ONEIDA,

OUTAGAMIE, PORTAGE, PRICE, SHAWANO, SHEBOYGAN, TAYLOR, VILAS,

WAUSHARA, WAUPACA, WINNEBAGO, AND WOOD COUNTIES

PAINTER..........................$ 22.82 11.52

PAIN0934-001 06/01/2014

KENOSHA AND WALWORTH COUNTIES

Rates Fringes

Painters:

Brush.......................$ 30.84 18.50 Spray.......................$ 31.84 18.50 Structural Steel............$ 30.99 18.50

PAIN1011-002 06/01/2014

FLORENCE COUNTY

Rates Fringes

Painters:........................$ 24.15 10.86

PLAS0599-010 06/01/2012

Rates Fringes

CEMENT MASON/CONCRETE FINISHER

Area 1......................$ 32.78 16.80 Area 2 (BAC)................$ 31.52 16.30 Area 3......................$ 31.37 16.85 Area 4......................$ 30.69 17.53 Area 5......................$ 32.09 16.13 Area 6......................$ 28.50 19.72

AREA DESCRIPTIONS

AREA 1: BAYFIELD, DOUGLAS, PRICE, SAWYER, AND WASHBURN

COUNTIES

AREA 2: ADAMS, ASHLAND, BARRON, BROWN, BURNETT, CALUMET,

CHIPPEWA, CLARK, COLUMBIA, DODGE, DOOR, DUNN, FLORENCE,

FOND DU LAC, FOREST, GREEN LAKE, IRON, JEFFERSON, KEWAUNEE,

LANGLADE, LINCOLN, MANITOWOC, MARATHON, MARINETTE,

MARQUETTE, MENOMINEE, OCONTO, ONEIDA, OUTAGAMIE, POLK,

PORTAGE, RUSK, ST CROIX, SAUK, SHAWANO, SHEBOYGAN, TAYLOR,

VILAS, WALWORTH, WAUPACA, WAUSHARA, WINNEBAGO, AND WOOD

AREA 3: BUFFALO, CRAWFORD, EAU CLAIRE, JACKSON, JUNEAU, LA

CROSSE MONROE, PEPIN, PIERCE, RICHLAND, TREMPEALEAU, AND

AREA 4: MILWAUKEE, OZAUKEE, WASHINGTON, AND WAUKESHA COUNTIES

AREA 5: DANE, GRANT, GREEN, IOWA, LAFAYETTE, AND ROCK

AREA 6: KENOSHA AND RACINE COUNTIES

PLUM0011-003 05/07/2012

ASHLAND, BAYFIELD, BURNETT, DOUGLAS, IRON, SAWYER, AND WASHBURN

PLUMBER..........................$ 35.77 16.73

PLUM0075-002 06/01/2014

MILWAUKEE, OZAUKEE, WASHINGTON, AND WAUKESHA COUNTIES

Rates Fringes

PLUMBER..........................$ 38.37 19.69

PLUM0075-004 06/01/2014

DODGE (Watertown), GREEN, JEFFERSON, LAFAYETTE, AND ROCK

PLUMBER..........................$ 38.62 19.57

PLUM0075-009 06/01/2014

COLUMBIA, DANE, IOWA, MARQUETTE, RICHLAND AND SAUK COUNTIES

Rates Fringes

PLUMBER..........................$ 37.57 17.47

PLUM0111-007 05/05/2014

MARINETTE COUNTY (Niagara only)

Rates Fringes

PLUMBER/PIPEFITTER...............$ 30.72 20.80

PLUM0118-002 06/01/2013

KENOSHA, RACINE, AND WALWORTH COUNTIES

Rates Fringes

Plumber and Steamfitter..........$ 35.71 19.94

PLUM0400-003 06/03/2013

ADAMS,BROWN, CALUMET, DODGE (except Watertown), DOOR, FOND DU LAC, GREEN LAKE,KEWAUNEE, MANITOWOC, MARINETTE (except Niagara), MENOMINEE, OCONTO, OUTAGAMIE, SHAWANO, SHEBOYGAN, WAUPACA, WAUSHARA, AND WINNEBAGO COUNTIES

PLUMBER/PIPEFITTER...............$ 33.26 16.28

PLUM0434-002 06/03/2013

BARON, BUFFALO, CHIPPEWA, CLARK, CRAWFORD, DUNN, EAU CLAIRE,

FLORENCE, FOREST, GRANT, JACKSON, JUNEAU, LA CROSSE, LANGLADE,

LINCOLN, MARATHON, MONROE, ONEIDA, PEPIN, PIERCE, POLK,

PORTAGE, PRICE, RUSK, ST. CROIX, TAYLOR, TREMPEALEAU, VERNON,

VILAS, AND WOOD COUNTIES

PIPEFITTER.......................$ 34.45 15.92

PLUM0601-003 01/01/2013

DODGE (Watertown), GREEN, JEFFERSON, LAFAYETTE, MILWAUKEE, OZAUKEE, ROCK, WASHINGTON AND WAUKESHA COUNTIES

PIPEFITTER.......................$ 39.26 19.91

PLUM0601-009 12/01/2012

COLUMBIA, DANE, IOWA, MARQUETTE, RICHLAND AND SAUK COUNTIES

Rates Fringes

PIPEFITTER.......................$ 42.45 16.71

TEAM0039-002 06/01/2014

Rates Fringes

TRUCK DRIVER

1 & 2 Axle Trucks...........$ 25.18 18.31 3 or more axles; Euclids or Dumptor, Articulated

Truck, Mechanic.............$ 25.38 18.31

SUWI2011-001 11/16/2011

Rates Fringes

WELL DRILLER.....................$ 16.52

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or "UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations

Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION

NOTES TO OFFERORS

NOTES TO OFFERORS

1. PLEASE SUBMIT THE FOLLOWING WITH YOUR QUOTATION:

a. A completed Standard Form (SF) 1442 with acknowledgement of any Amendments.

b. Documentation of relevant experience as indicated in paragraph 3 of the Scope of Work.

Quotations are due no later than the date and time indicated in Block 13 of the Standard Form (SF) 1442.

In accordance with Federal…