Questions and Answers.pdf
PDF 7 KB Posted
- Solicitation number
- W912ES-10-T-0092
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amendment 0003.pdf | ||
| Amendment 0002.pdf | ||
| Amendment 0001.pdf | ||
| W912ES10T0092.pdf | ||
| W912ES10T0092 DRAWINGS .pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Questions and Answers 24 August 2010
1. Question: There are details included for the soffit panels (sheet 6) and corners (3/7 on sheet 7) but there are no details on the plans or specifications for the roof ridge. Do you have any specific requirements for this item?
Answer: The ridge cap is made with the same roof steel bent at the proper angle and set to match the steel ribs.
2. Question: Typically an exterior sill plate would be pressure treated wood.
This is not shown in any of the details and there is nothing in the specifications. What will be required?
Answer: The sill plates should be treated wood.
3. Question: Same question as #2 except for the window sills.
Answer: Window sills will not need to be treated.
4. Question: The specifications and some of the plans call for the exterior doors to be insulated, however, the details on page 8 call for a non-insulated door. What is to be provided?
Answer: The overhead doors are to be non-insulated and the service doors are insulated according to sheet #4 notes 1 & 3.
5. Question: Will compaction test results be made available to the contractor?
Answer: No compaction test will be performed.
File details come from the government source that posted it. Updated .