B06 - W912EK26QA061 Questions and Answers.docx
DOCX document 14 KB Posted
- Attached to
- ILWW ODIMM New Aerial Lift
- Solicitation number
- W912EK26QA061
About this file
This is a Questions and Answers document for solicitation W912EK26QA061 issued by the Department of the Army Corps of Engineers, Rock Island District for the procurement of one new rough terrain fuel-electric articulated boom lift. The document addresses four key clarifications regarding submission requirements and equipment specifications. Offerors must submit the make and model of the quoted lift with their offer, though no formal amendment was issued to govern this requirement—the SAM notice update serves as the governing instruction. Standard original equipment manufacturer manufacturer/serial data plates are acceptable for identification purposes, with DoD IUID marking not required. No additional work attachments beyond the standard platform and listed Lift Tools Work Tray are required for this solicitation, and no attachments will be fitted to equipment at the project site.
The document clarifies that wage determinations do not apply to the delivery and up-to-three-hour machine function and familiarization requirement, which is intended solely as equipment familiarization to ensure turn-key readiness and to address operational questions. This familiarization does not constitute formal operator certification or training. The Questions and Answers were issued on September 14, 2026, following a September 9, 2026 notice update requesting make and model submissions.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| B06 - W912EK26QA061 - with Cover.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
W912EK26QA061 – Lift – Questions and Answers Q: The SAM notice was updated on September 9, 2026 to request that the make and model of the quoted lift be submitted with the offer. Please confirm that no revised solicitation attachment was issued and that this notice update is the governing additional submission instruction.
A: Negative. No Amendment was issued, Q: The purchase description requires “Unique Identification (UID) Tag(s),” but DFARS 252.211-7003 does not appear in the solicitation.
Is the standard OEM manufacturer/serial data plate acceptable, or is DoD IUID marking required? If IUID marking is required, please identify the required marking and data elements.
A: Standard OEM Manufacturer plate is acceptable.
Q: The turn-key requirement states that each attachment is to be installed, used, and removed during the delivery demonstration. We do not see separate work attachments identified in the purchase description. Please identify any required attachment(s) beyond the standard platform and the listed Lift Tools Work Tray.
A: No attachments are required in the solicitation and no attachments at the project will be fitted to this requirement.
Q: Please confirm whether any wage determination applies to the delivery and up-to-three-hour machine function/familiarization requirement, and whether this requirement is intended as equipment familiarization rather than formal operator certification or training.
A: Wage determination doesn’t apply. Familiarization operation to ensure the machine is turn-key ready and answer any operational questions. This is not for formal operation certification.
File details come from the government source that posted it. Updated .