B08 - W912EK26QA050 AMEND 0001.pdf

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER.

If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

Solicitation/Contract Form

The following changes have been made:

INFORMATION FROM TO

Response Due Date

02 Sep 2026 21 Sep 2026

Miscellaneous text in this section has been modified to:

Questions: Technical inquiries and questions relating to this solicitation are to be submitted via email to Joseph Porter at joseph.e.porter@usace.army.mil and no later than 16 September 2026 at 10:00 AM Central.

Pursuant to Executive Order (EO) 14275, Restoring Common Sense to Federal Procurement; EO 14265, Modernizing Defense Acquisitions and Spurring Innovation in the Defense Industrial Base and Office of Management and Budget Memorandum M-25-26, Overhauling the Federal Acquisition Regulation (May 2, 2025), Class Deviation 2026-O0038 was issued by the Department of War effective February 1, 2026 announcing the U.S. Government is operating under the Revolutionary FAR Overhaul (RFO), which specifically mandates the use of the RFO for FAR Part 52 and its applicable clauses. All legacy contracts will follow the legacy FAR through completion, unless specifically modified. All future procurements will align with the streamlined RFO. It is incumbent upon any potential offerors to verify the current status of RFO clauses and meet the revised criteria under the deviation.

Purchase Description

W912EK26QA0500001

Goose Lake Pump Station Check Valve Purchase

:Purchase Description

This scope includes the purchase of the below per the requirements below.

Schedule of Prices:

Item Description Quantity Unit Price Extended Price

0001 20-150 Cast Steel Swing Check Valve

3 $ $

0002 20-150 Cast Steel Elbow

6 $ $

Grand Total $

**CLIN 0002 below states 1 each, but please enter the price for 6 just like directly above.

NOTE: The unit/extended prices shall include shipping and handling. Do not separately price shipping and handling.

***The vendor is authorized and highly encouraged to immediately ship partial quantities that are available/in stock.

0001 Swing Check Specifications:

1. Bolted Bonnet

2. Flanged Ends ASME B16.5

3. Cast Carbon Steel

4. 20"

5. Class 150

6. Valve Design- B16.34

7. API 600 WALL

8. Body- A216 Gr. WCB (Weldable Cast B-grade carbon steel)

9. Cap- A216 Gr. WCB

10. Disc- CR13

11. Seat- HF

12. Gasket- Corrugated SST Encapsulated w/ Graphite

13. Carrier- A216 Gr. WCB

14. Carrier Pin- SST 410

15. Disc Nut- Series 300 SST

16. Disc Carrier Hanger- A216 Gr. WCB

17. Disc Carrier Hanger Bolts- A193 Gr. B7

18. Body / Cap Stud- A193 Gr. B7

19. Body / Cap Nut- A194 Gr. 2H

20. Identification Plate- Series 300 SST

21. Figure Number- 1561

22. Number of Bolt Holes: 20 holes

23. Bolt Circle Diameter: 25.00 inches

24. Bolt Hole Diameter: 1-1/4 inches

25. Bolt Size: 1-1/8 inches

26. Check Valves must meet ASTM and ASME standards

0002 Elbow Specifications:

1. Elbow with integrated flanges cast as a single solid piece.

2. Cast Carbon Steel

3. 20"

4. Class 150

5. ASTM A216 Gr. WCB (Weldable Cast B-grade carbon steel)

6. Flanged Ends ASME B16.5

7. Number of Bolt Holes: 20 holes

8. Bolt Circle Diameter: 25.00 inches

9. Bolt Hole Diameter: 1-1/4 inches

10. Bolt Size: 1-1/8 inches

Mandatory Minimum Qualifications:

The vendor must provide documentation that the manufacturer of the Class 20-150 swing check valves demonstrates a minimum of fifteen (15) consecutive years prior to the solicitation closing date of continuous experience in the design, machining, casting, assembly, and testing of class 20- 150 cast steel check valves.

Submittals:

Check Valves and Elbows:

- Manufacturer cut sheets, submitted with proposal.

- Dimensional Diagram, submitted with proposal.

- Manufacturer Warranty

- Delivery Schedule

**Please include on the quote the lead time for shipping.

Delivery Locations:

Dresden Island Lock and Dam

7521 Lock Road

Morris, IL 60450-9639

**Completion Date, Packaging and Acceptable Delivery Days and Times:

Customer receives product on or before 4 months after placing order. Deliver between the hours of 8am and 3pm Monday through Thursday, excluding Fridays, weekends and federal holidays.

Evaluation Factors for Award

The following clauses were modified:

52.212-2 Evaluation-Commercial Products and Commercial Services. (Deviation 2026-O0038) Feb 2026 hereby reads as follows:

Evaluation-Commercial Products and Commercial Services (Feb 2026) (Deviation 2026-O0038)

(a) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Quoter who quote conforms to the solicitation and offers the lowest price. The following factors will be used to evaluate offers:

Experience - Provide evidence that the manufacturer of the Class 20-150 swing check valves has a minimum of fifteen (15) consecutive years prior to the solicitation closing date of continuous experience in the design, machining, casting, assembly, and testing of Class 20-150 cast steel check valves.

Submittals - Quoters must submit with their quote (a) Manufacturer Cut Sheets, (b) Dimensional Diagram, (c) Manufacturer Warranty, and (d) Delivery Schedule.

To be eligible for award, the Quoter must have the required experience and their quote must provide the submittals above. The submittals must demonstrate that the quoted products conform to the specifications delineated in the solicitation.

(b) Options (if applicable). The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. The evaluation of options does not obligate the Government to exercise the option(s).

(c) . A written notice of award or acceptance of an offer furnished to the successful Notice of award Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

KO CONTRACTING DIVISION, 1 ROCK ISLAND ARSENAL

ROCK ISLAND, IL 61299-5001

UNITED STATES

JOSEPH PORTER, EMAIL: JOSEPH.E.PORTER@USACE.ARMY.MIL TELEPHONE: (309) 794-5333

AdminBy:

SCD: PAS: