W912EK20T0035 Amendment 0001.pdf

96514700425809

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Dew atering Supplies for Bubbler System Prefabrication at Peoria, Marseilles, and Starved Rock Lock and Dams

The reason for this amendment is to provide a revised Schedule of Prices, a revised Scope of Work, revised Plan-Sets, and to provide Questions and Answ ers to industry.

As a result of this amendment, the required response date/time has changed from 19-Mar-2020 02:00 PM to 25-Mar-2020 02:00 PM and the time for Questions and Answ ers has been extended to no later than 19-Mar-2020 at 2:00pm CT.

All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 12

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 17-Mar-2020

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912EK20T0035

X 9B. DATED (SEE ITEM 11)

09-Mar-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

17-Mar-2020

CODE

CONTRACTING DIVISION

US ARMY CORPS OF ENGINEERS

1500 ROCK ISLAND DRIVE

ROCK ISLAND IL 61201

W912EK 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

The required response date/time has changed from 19-Mar-2020 02:00 PM to 25-Mar-2020 02:00 PM.

The following have been modified:

Peoria – Schedule of Prices

PEORIA BUBBLER PIPING IN LOCK CHAMBER SUPPLY

All items shall be packaged and labeled in accordance with headings for each phase of work that the items fall under. The government will use this packaging as a means to separate the components for the phase of work. If items cannot be grouped into packages, individual items shall be labeled with the proper heading. For items with part numbers, the piece shall also be labeled with the associated part number.

CLIN Part No. Unit QTY Description Material Unit Price Amount

DOWNSTREAM

0001 N/A Each 12 3" Dia. Roll Grooved Pipe, 20' Long ASTM A312, Type 304L, Seamless

0002 N/A Each 1 3" Dia. Roll Grooved Pipe, 13' 1" Long ASTM A312, Type 304L, Seamless

0003 N/A Each 1 3" Dia. Roll Grooved Pipe, 3' Long ASTM A312, Type 304L, Seamless

0004 N/A Each 1 3" Dia. Roll Grooved Pipe, 4' 4" Long ASTM A312, Type 304L, Seamless

0005 N/A Each 1 3" Dia. Roll Grooved Pipe, 4' 3" Long ASTM A312, Type 304L, Seamless

0006 N/A Each 1 3" Dia. Roll Grooved Pipe, 1' 6" Long ASTM A312, Type 304L, Seamless

0007 N/A Each 1 2.5" Dia. Roll Grooved Pipe, 1' 6" Long ASTM A312, Type 304L, Seamless

0008 M-575-A1 Each 2 2.5" x 20' Bubbler Assembly, w/ 2 branch fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0009 M-575-B1 Each 2 2.5" x 20' Bubbler Assembly, w/ 3 branch fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0010 M-575-D1 Each 1 2.5" x 2' 5" Bubbler Assembly, w/ 1 branch fitting ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0011 N/A Each 2 2" Dia. Roll Grooved Pipe, 4' 6" Long; Sch 40 ASTM A312, Type 304L, Seamless

0012 N/A Each 2 2" Dia. Roll Grooved Pipe, 1' 2" Long; Sch 40 ASTM A312, Type 304L, Seamless

0013 N/A Each 2 2" Dia. Roll Grooved Pipe, 8.5" Long; Sch 40 ASTM A312, Type 304L, Seamless

0014 M-576-A1 Each 2 2" x 20' Bubbler Assembly w/ 4 branch fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0015 M-576-B1 Each 2 2"x20' Bubbler Assembly w/ 2 branch fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0016 M-576-D1 Each 2 2"x10' Bubbler Assembly w/ 1 branch fitting ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0017 M-576-E1 Each 2 2" x 5' 4" Bubbler Assembly w/ 2 branch fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

UPSTREAM

0018 N/A Each 7 3" Dia. Roll Grooved Pipe, 20' Long ASTM A312, Type 304L, Seamless

0019 N/A Each 1 3" Dia. Roll Grooved Pipe, 18' 5" Long ASTM A312, Type 304L, Seamless

0020 N/A Each 2 3" Dia. Roll Grooved Pipe, 16' Long ASTM A312, Type 304L, Seamless

0021 N/A Each 1 3" Dia. Roll Grooved Pipe, 14' 10" Long ASTM A312, Type 304L, Seamless

0022 N/A Each 2 3" Dia. Roll Grooved Pipe, 5' 7" Long ASTM A312, Type 304L, Seamless

0023 N/A Each 1 3" Dia. Roll Grooved Pipe, 3' Long ASTM A312, Type 304L, Seamless

0024 N/A Each 1 3" Dia. Roll Grooved Pipe, 9' 1" Long ASTM A312, Type 304L, Seamless

0025 N/A Each 1 3" Dia. Roll Grooved Pipe, 9' 8" Long ASTM A312, Type 304L, Seamless

0026 N/A Each 1 3" Dia. Roll Grooved Pipe, 8' Long ASTM A312, Type 304L, Seamless

0027 N/A Each 1 3" Dia. Roll Grooved Pipe, 4' 2" Long ASTM A312, Type 304L, Seamless

0028 N/A Each 1 3" Dia. Roll Grooved Pipe, 5' 1" Long ASTM A312, Type 304L, Seamless

0029 M-577-A1 Each 1 2.5" x 20' Bubbler Assembly, w/ 3 branch fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0030 M-577-B1 Each 2 2.5" x 20' Bubbler Assembly, w/ 2 branch fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0031 M-577-D1 Each 2 2.5" x 7' 6" Bubbler Assembly, w/ 1 branch fitting ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0032 M-577-E1 Each 2 2.5" x 5' 8" Bubbler Assembly, w/ 1 branch fitting ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0033 M-577-F1 Each 1 2.5" x 7' 1" Bubbler Assembly, w/ 1 branch fitting ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0034 M-577-C1 Each 1 2.5" x 13' Bubbler Assembly, w/ 2 branch fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0035 N/A Each 2 2" Dia. Roll Grooved Pipe, 4' 6" Long ASTM A312, Type 304L, Seamless

0036 N/A Each 2 2" Dia. Roll Grooved Pipe, 8.5" Long ASTM A312, Type 304L, Seamless

0037 N/A Each 2 2" Dia. Roll Grooved Pipe, 1' 2" Long ASTM A312, Type 304L, Seamless

0038 M-576-A1 Each 2 2" x 20' Bubbler Assembly, w/ 4 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0039 M-576-B1 Each 2 2" x 20' Bubbler Assembly, w/ 2 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0040 M-576-D1 Each 2 2" x 10' Bubbler Assembly, w/ 1 Branch Fitting ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0041 M-576-E1 Each 2 2" x 5' 4" Bubbler Assembly, w/ 2 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0042 N/A Each 1 3" Dia. Roll Groove Pipe, 12' 11" Long ASTM A312, Type 304L, Seamless

TOTAL OF ESTIMATED AMOUNTS LOCK CHAMBER BUBBLER (BID ITEM NOS. 0001 THRU 0042, INCL.) $

EA = EACH LF = LINEAR FEET **PLEASE ENSURE THAT UNIT PRICE AND AMOUNT LINES FOR ALL ITEMS HAVE BEEN COMPLETED.**

Marseilles – Schedule of Prices

MARSEILLES BUBBLER PIPING IN LOCK CHAMBER SUPPLY

All items shall be packaged and labeled in accordance with headings for each phase of work that the items fall under. The government will use this packaging as a means to separate the components for the phase of work. If items cannot be grouped into packages, individual items shall be labeled with the proper heading. For items with part numbers, the piece shall also be labeled with the associated part number.

CLIN Part No. Unit QTY Description Material Unit Price Amount

DOWNSTREAM

0043 N/A Each 10 3" Dia. Roll Grooved Pipe, 20' Long ASTM A312, Type 304L, Seamless

0044 N/A Each 1 3" Dia. Roll Grooved Pipe, 19' 9" Long ASTM A312, Type 304L, Seamless

0045 N/A Each 1 3" Dia. Roll Grooved Pipe, 19' Long ASTM A312, Type 304L, Seamless

0046 N/A Each 1 3" Dia. Roll Grooved Pipe, 2' 6" Long ASTM A312, Type 304L, Seamless

0047 N/A Each 1 3" Dia. Roll Grooved Pipe, 7' 11" Long ASTM A312, Type 304L, Seamless

0048 N/A Each 1 3" Dia. Roll Grooved Pipe, 2' Long ASTM A312, Type 304L, Seamless

0049 N/A Each 1 3" Dia. Roll Grooved Pipe, 1' 6" Long ASTM A312, Type 304L, Seamless

0050 N/A Each 1 3" Dia. Roll Grooved Pipe, 5' 10 5/8" Long ASTM A312, Type 304L, Seamless

0051 N/A Each 1 3" Dia. Roll Grooved Pipe, 9' 1 1/2" Long ASTM A312, Type 304L, Seamless

0052 N/A Each 1 3" Dia. Roll Grooved Pipe, 18' Long ASTM A312, Type 304L, Seamless

0053 M-575-D1 Each 4 3" Dia. Roll Grooved Pipe, 10' Long, Bent to 15' 6" Radius ASTM A312, Type 304L, Seamless

0054 N/A Each 2 3" Dia. Roll Grooved Pipe, 1' Long ASTM A312, Type 304L, Seamless

0055 N/A Each 1 3" Dia. Roll Grooved Pipe, 2' 1-3/4" Long ASTM A312, Type 304L, Seamless

0056 N/A Each 1 3" Dia. Roll Grooved Pipe, 2' 7" Long ASTM A312, Type 304L, Seamless

0057 M-577-A1 Each 3 3" Dia. Pipe, 20' Long, One end 3" NPT, One End Roll Grooved ASTM A312, Type 304L, Seamless

0058 M-575-A1 Each 3 2.5" x 20' Bubbler Assembly w/ 3 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0059 M-575-B1 Each 2 2.5" x 20' Bubbler Assembly w/ 2 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0060 N/A Each 2 2" Dia Roll Grooved Pipe, 1' 4" Long ASTM A312, Type 304L, Seamless

0061 N/A Each 2 2" Dia Roll Grooved Pipe, 8" Long ASTM A312, Type 304L, Seamless

0062 M-576-E1 Each 2 2" x 7' 6" Bubbler Assembly, 15' 6" Radius w/ 2 branch fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0063 M-576-C1 Each 2 2" x 9' Bubbler Assembly, 15' 6" Radius w/ 1 branch fitting ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0064 M-576-A1 Each 2 2" x 20' Bubbler Assembly w/ 4 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0065 M-576-B1 Each 2 2" x 20' Bubbler Assembly w/ 2 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

UPSTREAM

0066 N/A Each 1 3" Dia. Roll Grooved Pipe, 20' Long ASTM A312, Type 304L, Seamless

0067 M-577-A1 Each 2 3" Dia. Pipe, 20' Long, One end 3" NPT, One End Roll Grooved ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0068 M-577-B1 Each 1 3" Dia. Roll Pipe, 19' 6" Long, One end 3" NPT, One End Roll Grooved ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0069 N/A Each 1 3" Dia. Roll Grooved Pipe, 17' 4" Long ASTM A312, Type 304L, Seamless

0070 N/A Each 2 3" Dia. Roll Grooved Pipe, 15' Long ASTM A312, Type 304L, Seamless

0071 M-577-D1 Each 5 3" Dia. Pipe, 20' Long, 71' 6" Radius Bend, Flanged Ends ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0072 M-577-E1 Each 3 3" Dia. Roll Grooved Pipe, 10' Long, 15' 6" Radius Bend, one end flanged , one end roll grooved

ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0073 M-578-A1 Each 1 2-1/2" x 20' Bubbler Assembly w/ 3 Branch Fittings. 71' 6" Bend Radius, Flanged ends ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0074 M-578-B1 Each 1 2-1/2" x 20' Bubbler Assembly w/ 3 Branch Fittings. 71' 6" Bend Radius. Flanged ends ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0075 M-578-D1 Each 1 2-1/2" x 20' Bubbler Assembly w/ 2 Branch Fittings. 71' 6" Bend Radius, Flanged ends ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0076 M-578-E1 Each 1 2-1/2" x 20' Bubbler Assembly w/ 3 Branch Fittings. 71' 6" Bend Radius, Flanged ends ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0077 M-578-F1 Each 1 2-1/2" x 20' Bubbler Assembly w/ 3 Branch Fittings. 71' 6" Bend Radius ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0078 N/A Each 1 2" Dia Roll Grooved Pipe, 1' 11" Long ASTM A312, Type 304L, Seamless

0079 M-579-C5 Each 2 2" x 4' 1" Bubbler Assembly w/ 2 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0080 M-579-E1 Each 2 2" x 5' 1" Bubbler Assembly w/ 1 Branch Fitting ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0081 M-579-A1 Each 2 2" x 20' Bubbler Assembly w/ 3 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0082 M-579-B1 Each 2 2" x 18' Bubbler Assembly w/ 2 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0083 M-579-C1 Each 2 2" x 8' 6" Bubbler Assembly w/ 1 Branch Fitting. 15' 6" Bend Radius ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

TOTAL OF ESTIMATED AMOUNTS LOCK CHAMBER BUBBLER (BID ITEM NOS. 01 THRU 4018, INCL.) $

EA = EACH LF = LINEAR FEET **PLEASE ENSURE THAT UNIT PRICE AND AMOUNT LINES FOR ALL ITEMS HAVE BEEN COMPLETED.**

Starved Rock – Schedule of Prices

STARVED ROCK BUBBLER PIPING IN LOCK CHAMBER SUPPLY

All items shall be packaged and labeled in accordance with headings for each phase of work that the items fall under. The government will use this packaging as a means to separate the components for the phase of work. If items cannot be grouped into packages, individual items shall be labeled with the proper heading. For items with part numbers, the piece shall also be labeled with the associated part number.

CLIN Part No. Unit QTY Description Material Unit Price Amount

DOWNSTREAM

0084 N/A Each 10 3" Dia. Roll Grooved Pipe, 20' Long ASTM A312, Type 304L, Seamless

0085 N/A Each 1 3" Dia. Roll Grooved Pipe, 13' 2" Long ASTM A312, Type 304L, Seamless

0086 N/A Each 1 3" Dia. Roll Grooved Pipe, 2' 2" Long ASTM A312, Type 304L, Seamless

0087 N/A Each 1 3" Dia. Roll Grooved Pipe, 2' 3/4" Long ASTM A312, Type 304L, Seamless

0088 N/A Each 1 3" Dia. Roll Grooved Pipe, 1' Long ASTM A312, Type 304L, Seamless

0089 N/A Each 1 3" Dia. Roll Grooved Pipe, 2' Long ASTM A312, Type 304L, Seamless

0090 N/A Each 1 3" Dia. Roll Grooved Pipe, 1' 6" Long ASTM A312, Type 304L, Seamless

0091 N/A Each 1 3" Dia. Roll Grooved Pipe, 3' 10" Long ASTM A312, Type 304L, Seamless

0092 N/A Each 1 3" Dia. Roll Grooved Pipe, 4" Long ASTM A312, Type 304L, Seamless

0093 M-576-D1 Each 4 3" Dia. Roll Grooved Pipe, 15' 6" Bend Radius, 10' Long ASTM A312, Type 304L, Seamless

0094 M-576-F1 Each 3 3" Dia. Roll Grooved Pipe, 15' 6" Bend Radius, 2' Long ASTM A312, Type 304L, Seamless

0095 M-576-A1 Each 2 2.5" x 20' Bubbler Assembly w/ 3 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0096 M-576-B1 Each 2 2.5" x 20' Bubbler Assembly w/ 2 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0097 M-576-C1 Each 1 2.5" x 18' 6" Bubbler Assembly w/ 3 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0098 M-579-D1 Each 2 2" x 8' Bubbler Assembly w/ 1 Branch Fitting. 15' 6" Bend Radius ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0099 M-578-F1 Each 1 2" x 17' 8" Bubbler Assembly w/3 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0100 M-578-B1 Each 1 2" x 20' Bubbler Assembly w/2 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0101 M-578-A1 Each 1 2" x 20' Bubbler Assembly w/2 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0102 M-579-B1 Each 1 2" x 16' Bubbler Assembly w/2 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0103 M-579-E1 Each 1 2" x 4' 3" Bubbler Assembly w/ 1 Branch Fitting ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0104 M-579-B7 Each 2 2" x 5' 5" Bubbler Assembly w/ 2 Branch Fitting ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0105 M-579-A7 Each 1 2" x 6' Bubbler Assembly w/ 2 Branch Fitting ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0106 N/A Each 1 2" Dia. Roll Grooved Pipe, 8" Long ASTM A312. Type 304L, Seamless

0107 N/A Each 1 2" Dia. Roll Grooved Pipe, 3' 7" Long ASTM A312. Type 304L, Seamless

0108 N/A Each 1 3" Dia. Roll Grooved Pipe, 18'-6" Long ASTM A312. Type 304L, Seamless

UPSTREAM

0108 M-575-A1 Each 4 3" Dia. Pipe, 20' Long. One End Roll Grooved, One End 3" NPT ASTM A312, Type 304L, Seamless

0109 N/A Each 1 3" Dia. Roll Grooved Pipe, 1' 8" Long ASTM A312, Type 304L, Seamless

0110 M-575-F4 Each 3 3" Dia. Roll Grooved Pipe, 15' 6" Radius Bend, 10' Long. One end flanged, one end roll grooved ASTM A312, Type 304L/ ASTM A182 F304L

0111 M-575-B1 Each 5 3" Pipe Assembly, 71' 6" Radius Bend, 20' Long w/ two flanges ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0112 M-575-D4 Each 1 3" Pipe Assembly, 71' 6" Radius Bend, 10' Long w/ two flanges ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0113 N/A Each 1 3" Dia. Roll Grooved Pipe, 20' Long ASTM A312, Type 304L, Seamless

0114 N/A Each 1 3" Dia. Roll Grooved Pipe, 17' 4" Long ASTM A312, Type 304L, Seamless

0115 M-577-A1 Each 1 2-1/2" x 20' Bubbler Assembly w/ 3 Branch Fittings. 71' 6" Bend Radius ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0116 M-577-B1 Each 1 2-1/2" x 20' Bubbler Assembly w/ 3 Branch Fittings. 71' 6" Bend Radius ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0117 M-577-D1 Each 1 2-1/2" x 20' Bubbler Assembly w/ 2 Branch Fittings. 71' 6" Bend Radius ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0118 M-577-E1 Each 1 2-1/2" x 20' Bubbler Assembly w/ 3 Branch Fittings. 71' 6" Bend Radius ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0119 M-577-F1 Each 1 2-1/2" x 20' Bubbler Assembly w/ 3 Branch Fittings. 71' 6" Bend Radius ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0120 M-579-B7 Each 2 2" x 5' 5" Bubbler Assembly w/ 2 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0121 M-579-E1 Each 1 2" x 4' 3" Bubbler Assembly w/ 1 Branch Fitting ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0122 M-578-C1 Each 1 2" x 20' Bubbler Assembly w/ 3 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0123 M-579-A1 Each 1 2" x 16' 10" Bubbler Assembly w/2 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0124 M-579-C1 Each 2 2" x 8' 9" Bubbler Assembly w/ 1 Branch Fitting. 15' 6" Bend Radius ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0125 M-579-F1 Each 1 2" x 2' Bubbler Assembly w/ 1 Branch Fitting ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0126 M-578-D1 Each 1 2" x 20' Bubbler Assembly w/ 3 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0127 M-578-E1 Each 1 2" x 19' Bubbler Assembly w/ 2 Branch Fittings ASTM A312, Type 304L, Seamless/ ASTM A182 F304L

0128 N/A Each 1 2" Dia. Roll Grooved Pipe, 1' 4" Long ASTM A312, Type 304L, Seamless

TOTAL OF ESTIMATED AMOUNTS LOCK CHAMBER BUBBLER (BID ITEM NOS. 0084 THRU 0128, INCL.) $

EA = EACH LF = LINEAR FEET **PLEASE ENSURE THAT UNIT PRICE AND AMOUNT LINES FOR ALL ITEMS HAVE BEEN COMPLETED.**

Scope of Work

Provide quantities and fabricated materials as specified below in the Specifications and in the Schedule of Prices in support of Peoria, Marseilles, and Starved Rock Bubbler Systems. Bubbler System.

1. Cost for packaging and delivery to each FOB Destination shall be included in cost of each item.

2. Delivery Date(s): All items shall be delivered 6 weeks after award and any items that cannot meet this date will be coordinated in writing to C.J. Brooks at Curtis.J.Brooks@USACE.army.mil

3. Deliver to:

Peoria: Peoria Lock and Dam – 1071 Wesley Road Creve Coeur, IL 61610-3869 Marseilles Marseilles Lock and Dam –2199 Hawk Road Marseilles, IL 61341-0117 Starve Rock: Starved Rock Lock and Dam –950 N. 27th Road Ottawa, IL 61350-9736

The contractor shall deliver the items to the Peoria, Marseilles, and Starved Rock Lock and dam per the Schedule of Prices. Each site shall be labeled, packaged and delivered according to the Schedule of Prices.

Delivery of all supplies shall be coordinated with C.J. Brooks. Delivery of the items shall be via FOB Destination between 0800 and 1530 hours Monday through Friday; excluding holidays.

4. Sustainability Requirements: N/A.

5. Security: Pre-screen candidates using E-Verify Program. The Contractor must pre-screen Candidates using the E-verify Program website (http://www.uscis.gov/e-verify) to meet the established employment eligibility requirements. The Contractor must ensure that the Candidate has two valid forms of Government issued identification prior to enrollment to ensure the correct information is entered into the E-verify system.

Documentation of company enrollment in E-verify, via a print screen of the company profile within the E-verify system, must be submitted to the Security Office no later than 3 business days after the initial Notice to Proceed.

*When contracts are with individuals, the individuals will be required to complete a Form I-9, Employment Eligibility Verification must be given/coordinated with the designated Government representative. This Form will be provided to the Security Office after Notice to Proceed is given.

To protect the privacy of the Contractor, all Contractor employees, and all sub-contractor employees, background checks, OPSEC SOPs, E-verify, and I-9 forms shall be submitted with a coversheet stating the contract number (e.g. W912EK-15-C-XXXX), title of project, and the company's point of contact information, in a sealed envelope/container and mailed to:

Security Office U.S. Army Corps of Engineers Rock Island District 1500 Rock Island Drive Rock Island, IL 61201

6. Invoicing/Payment Processing: Invoices are to be submitted via email to Curtis.J.Brooks@usace.army.mil. Please ensure that your invoice reflects the company name(s) and physical address listed on your System for Award Management (SAM) registration.

7. See Attachment 0001 – Peoria Plan-Set, Attachment 0002 – Marseilles Plan-Set, and Attachment 0003 – Starved Rock Plan-Set for Rolled Groove Piping drawings.

SECTION TABLE OF

CONTENTS DIVISION 05 -

METALS SECTION 05 50 04

METALS: MISCELLANEOUS, STANDARD ARTICLES, SHOP FABRICATED ITEMS

MATERIAL SUPPLY CONTRACT

PART 1 GENERAL

1.1 SUMMARY

1.2 REFERENCES

1.3 SUBMITTALS

1.4 DELIVERY, STORAGE, AND

HANDLING PART 2 PRODUCTS

2.1 MISCELLANEOUS METALS AND STANDARD METAL ARTICLES

2.1.1 Stainless Steel Pipe

2.1.2 Branch Outlet Fittings

2.1.3 Pipe Flanges

PART 3 EXECUTION

3.1 FABRICATION

3.2 WORKMANSHIP

3.3 FINISHED AND DRILLED SURFACES DIMENSIONS AND TOLERANCES

3.4 UNFINISHED SURFACES DIMENSIONS AND TOLERANCES

3.5 PACKAGING AND DELIVERY

-- End of Section Table of Contents --

SECTION 05 50 04

METALS: MISCELLANEOUS, STANDARD ARTICLES, SHOP FABRICATED ITEMS

MATERIAL SUPPLY CONTRACT

PART 1 GENERAL

1.1 SUMMARY

This section addresses the fabrication and delivery of stainless steel pipe and fabricated items.

1.2 REFERENCES

The publications listed below form a part of this specification to the extent referenced. The publications are referred to in the text by basic designation only.

ASTM INTERNATIONAL (ASTM)

ASTM A312 (2019) Standard Specification for Seamless, Welded and Heavily Cold Worked Austenitic Stainless Steel Pipes

ASTM A182 (2019) Standard Specification for Forged or

Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service.

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

ASME B1.20.1 (2013) Pipe Threads, General Purpose (Inch)

ASME B16.5 (2017) Pipe Flanges and Flanged Fittings:

NPS 1/2 through NPS 24 Metric/Inch Standard

ASME B31.1 (2018) Power Piping Code

ASME B36.10 (2018) Welded and Seamless Wrought Steel Pipe

MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS

INDUSTRY (MSS)

MSS SP-97 (2019) Integrally Reinforced Forged Branch Outlet Fittings: Socket Welding, Threaded, And Buttwelding Ends

1.3 SUBMITTALS

SD-07 Test Reports

MATERIAL TEST REPORTS

Material Certification testing shall be performed and reports shall be submitted for all items supplied under the contract. The reports shall include a description of material, chemical properties and mechanical properties of the material used to manufacture the contract parts.

Information shall be included which renders the reports identifiable and traceable with the specific parts manufactured for the contract.

1.4 DELIVERY, STORAGE, AND HANDLING

Delivery, handling, and storage of materials and fabricated items shall conform to the requirements specified herein. Protect materials from corrosion, deformation, and other types of damage. Remove and replace damaged items with new items.

PART 2 PRODUCTS

2.1 MISCELLANEOUS METALS AND STANDARD METAL ARTICLES

Miscellaneous metal materials and standard metal articles shall conform to the respective specifications and other designated requirements. Sizes shall be as specified or shown on the drawings. Where material requirements are not specified, materials furnished shall be suitable for the intended use and shall be subject to approval by the Government.

2.1.1 Stainless Steel Pipe

Provide Schedule 40 seamless stainless steel pipe in accordance with ASTM A312, Type 304L. Pipe wall thickness to be in accordance with ASME B36.10.

2.1.2 Stainless Steel Branch Outlet Fittings

Provide Class 3000 forged branch outlet fittings in accordance with ASTM A182 F304L and MSS SP-97. Provide fittings sized for welding to 2 inch and 2-1/2 inch pipe. Fittings shall have 1-1/2 inch threaded outlet.

Outlet threads shall be in accordance with ASME B1.20.1.

2.1.3 ASME Class 150 Flanges

Provide Class 150 raised face socket welding pipe flanges, with material in accordance with ASTM A182 F304L. Flanges to be in accordance with ASME B16.5.

PART 3 EXECUTION

3.1 FABRICATION

Provide pipe cut to the lengths indicated in Schedule of Prices and detailed

W912EK20T0035

drawings, with ends roll grooved for use with grooved pipe couplings and fittings. Prepare pipe and perform grooving in accordance with the grooving tool manufacturers recommendations. Groove width, depth and pipe end distance as indicated in contract drawings and in accordance with coupling manufacturer guidance. Cut grooving of pipes is prohibited.

Where indicated in contract drawings, drill 3/8 inch holes in pipe.

Drilled holes shall be within 10 degrees of each other, as measured from the centerline of the holes along the length of the pipe. Center branch fittings over drilled holes and weld to pipe. Weld branch fitting to pipe in accordance with ASME B31.1.

Where indicated in contract drawings, bend pipes to the radius shown.

Pipe bends to conform with ASME B31.1 for wall thickness after bending.

Where flanges are indicated on bent pipes, weld flanges to pipe in accordance with ASME B16.5 and ASME B31.1.

3.2 WORKMANSHIP

All workmanship shall be of the highest grade in accordance with the best modern practices to conform to the specifications for the item to be furnished. All similar parts shall be interchangeable. All sharp edges and corners shall be broken. All holes shall be normal to the surfaces of penetration and shall be sized as indicated on the drawings.

All holes must be drilled.

Material with welds will not be accepted, except where welding is definitely specified, indicated on the drawings, or otherwise approved.

Where heating is required, precautions shall be taken to avoid overheating the metal and it shall be allowed to cool in such manner as not to destroy the original properties of the metal. Cutting shall be accurately done and all portions of the work shall be neatly finished.

Cutting shall be done by saw, water-jet, or high definition plasma arc.

Finished members shall be free from twists, bends, and open joints.

3.3 FINISHED AND DRILLED SURFACES DIMENSIONS AND TOLERANCES

Tolerances for drilled and machine-finished surfaces designated by non-decimal dimensions shall be within +/- 1/64 inch unless otherwise noted on the drawing.

3.4 UNFINISHED SURFACES DIMENSIONS AND TOLERANCES

Unfinished surfaces shall be true to the lines and dimensions given on the drawing and shall be ground free of all projections and rough spots.

Tolerances shall conform to industry practices. The cut dimensions of the steel pipes shall be + / - 1/16".

3.5 PACKAGING AND DELIVERY

The Contractor shall package and label all items in accordance with the Schedule of Prices heading that the items fall under. Package items to prevent damage or distortion during shipping. If items cannot be grouped into packages, individual items shall be labeled with the proper heading.

For items with part numbers, the piece shall also be labeled with the associated part number.

-- End of Section --

MVR.03

QUESTION AND ANSWER

via email

Technical inquiries and questions relating to this solicitation are to be submitted to Jacob Toft at jacob.j.toft@usace.army.mil no later than 19 March 2020 at 2:00 p.m. CT.

(End of Summary of Changes)

The following items are applicable to this modification:

Questions & Answers (as of 16 March 2020) – Amendment 0001

Q1: Item 580-A1 is shown on each set of drawings but is not shown in and assembly and not listed on the price sheets. What is the material? What is the quantity? Where is the pricing to be stated?

A1: Item has been pulled from the solicitation.

Q2: Some assemblies include a socket weld flange. Is the orientation of the bolt holes in the flange critical in relation to the remainder of the assembly?

A2: The flanges are raised face and should be oriented so that the bolt holes are +/- 45 degrees from the 12 o'clock and 6 o'clock position when viewed from the end of the pipe.

Q3: Item 575 Branch Outlet Fitting. A detail drawing is needed stating material.

A3: The branch outlet fitting (M-575-P2) is ASTM A182, F304L. A typical branch fitting detail and material schedule is on sheet M-575 (detail M-575-F1) of each plan set.

Q4: What are the material handling/unloading capabilities and requirements at each destination?

A4: Each site can lift 1.5 tons

Q5: Is the stainless pipe seamless or welded?

A5: Pipe is to be Schedule 40 Seamless ASTM A312 TP 304L, UNS S30403.

Q6: Item M-575-A1 (2) drawings on sheet 10 with same number, only one CLIN?

A6: The bent pipe on M-575 that is labeled as M-575 A-1 was incorrectly labeled. The label should be M-575-B1 and now corresponds to CLIN 0111, this error has been fixed.

Q7: CLIN 0119 Item M-579-B7 no drawing duplication of CLIN 0103?

A7: The drawing for CLIN 0120 (was 0119) is the same as for CLIN 0104 (was 0103) and is shown in detail M-579-B7 on sheet M-579.

Q8: CLIN 0103 & 0104, items M-579-B7 and M-579-A7 no drawing

A8: The drawings for CLIN 0104 (previously 0103) are shown on sheet M-579 details B7 and A7 respectively.

ALL NUMBERING AND DRAWING DISCREPANCIES ARE ADDRESSED IN THE

REVISED SCHEDULE OF PRICES AND ATTACHED PLAN-SETS.