W912EK-17-T-0003-0001.pdf

96514763377160

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The reason for this amendment is to provide an updated statement of w ork and schedule of prices.

In addition, the follow ing clauses are added:

52.225-3 Alt III 52.225-4 Alt III 252.225-7002

In addition, the follow ing clause is removed:

52.225-1

1. CONTRACT ID CODE PAGE OF PAGES

J 1 7

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 13-Dec-2016

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912EK-17-T-0003

X 9B. DATED (SEE ITEM 11)

08-Dec-2016

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

13-Dec-2016

CODE

CONTRACTING DIVISION

US ARMY CORPS OF ENGINEERS

1500 ROCK ISLAND DRIVE

ROCK ISLAND IL 61201

W912EK 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912EK-17-T-0003

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

The following have been added by full text:

52.225-3 BUY AMERICAN ACT--FREE TRADE AGREEMENTS--ISRAELI TRADE ACT (MAY 2014)

ALTERNATE III (MAY 2014)

(a) Definitions. As used in this clause--

Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end product means an article that--

(1) Is wholly the growth, product, or manufacture of Bahrain, Korea (Republic of), Morocco, Oman, Panama, or Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain, Korea (Republic of), Morocco, Oman, Panama, or Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed.

The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to the article, provided that the value of those incidental services does not exceed that of the article itself.

Commercially available off-the-shelf (COTS) item-- (1) Means any item of supply (including construction material) that is--

(i) A commercial item (as defined in paragraph (1) of the definition at FAR 2.101);

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in section 3 of the Shipping Act of 1984 (46 U.S.C. App. 1702), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Cost of components means--

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product.

Domestic end product means--

(1) An unmanufactured end product mined or produced in the United States;

(2) An end product manufactured in the United States, if--

(i) The cost of its components mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or

(ii) The end product is a COTS item.

End product means those articles, materials, and supplies to be acquired under the contract for public use.

Foreign end product means an end product other than a domestic end product.

Free Trade Agreement country means Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Oman, Panama, Peru, or Singapore.

Free Trade Agreement country end product means an article that--

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to the article, provided that the value of those incidental services does not exceed that of the article itself.

Israeli end product means an article that--

(1) Is wholly the growth, product, or manufacture of Israel; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Israel into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Components of foreign origin. Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract.

(c) Delivery of end products. 41 U.S.C. chapter 83 provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the component test of the Buy American statute is waived for an end product that is a COTS item (See 12.505(a)(1)). In addition, the Contracting Officer has determined that FTAs (except the Bahrain, Korea (Republic of), Morocco, Oman, Panama, or Peru FTAs) and the Israeli Trade Act apply to this acquisition. Unless otherwise specified, these trade agreements apply to all items in the Schedule. The Contractor shall deliver under this contract only domestic end products except to the extent that, in its offer, it specified delivery of foreign end products in the provision entitled ``Buy American --Free Trade Agreements--Israeli Trade Act Certificate.'' If the Contractor specified in its offer that the Contractor would supply a Free Trade Agreement country end product (other than a Bahrainian, Korean, Moroccan, Omani, Panamanian or Peruvian end product) or an Israeli end product, then the Contractor shall supply a FreeTrade Agreement country end product (other than a Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end product), an Israeli end product or, at the Contractor's option, a domestic end product.

(End of clause)

52.225-4 BUY AMERICAN --FREE TRADE AGREEMENTS--ISRAELI TRADE ACT CERTIFICATE (MAY

2014) ALTERNATE III (MAY 2014)

(a) The offeror certifies that each end product, except those listed in paragraph (b) or (c) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms “Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “Israeli end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American--Free Trade Agreements--Israeli Trade Act.”

(b) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled ``Buy American--Free Trade Agreements--Israeli Trade Act'':

Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:

LINE ITEM NO. COUNTRY OF ORIGIN

[List as necessary]

(c) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (b) of this provision) as defined in the clause of this solicitation entitled “Buy American--Free Trade Agreements--Israeli Trade Act.” The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.”

Other Foreign End Products:

LINE ITEM NO. COUNTRY OF ORIGIN

[List as necessary]

(d) The Government will evaluate offers in accordance with the policies and procedures of Part 25 of the Federal Acquisition Regulation.

(End of provision)

252.225-7002 QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (AUG 2016)

(a) Definition. Qualifying country, as used in this clause, means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Australia Austria Belgium Canada Czech Republic Denmark Egypt Finland France Germany Greece Israel Italy Japan Luxembourg Netherlands Norway Poland Portugal Slovenia Spain Sweden Switzerland Turkey United Kingdom of Great Britain and Northern Ireland

(b) Subject to the restrictions in section 225.872 of the Defense FAR Supplement, the Contractor shall not preclude qualifying country sources or U.S. sources from competing for subcontracts under this contract.

(End of clause)

The following have been modified:

SCHEDULE OF PRICES

Schedule of Prices

ITEM

NO. NOMINCLATURE QTY UNIT UNIT PRICE AMOUNT

Plate, ⅜ inch x 6 ft. x 20 ft. (ASTM A36 or A572/709 Gr50) 25 EA

Plate, ⅜ inch x 6 ft. x 30 ft. (ASTM A36 or A572/709 Gr50) 25 EA

Plate, ⅜ inch x 8 ft. x 30 ft. (ASTM A36 or A572/709 Gr 50) 10 EA

Plate, ½ inch x 8 ft. x 20 ft. (ASTM A36 or A572/709 Gr 50) 10 EA

5 Flat, ⅝ inch 3 inch x 20 ft. 20 EA

Channel - Structural, 15 x 33.9#, 40 ft. 5 EA $ $

Angle, L8 inch x 8 inch x ½ inch x 40 ft. 5 EA $ $

Angle, L6 inch x 6 inch x ½ inch x 40 ft. 30 EA $ $

Angle, L6 inch x 4 inch x ½ inch x 40 ft. 5 EA $ $

Angle, L5 inch x 3½ inch x ⅜ inch x 40 ft. 20 EA $ $

Angle, L5 inch x 3 inch x ⅜ inch x 40 ft. 40 EA $ $

Angle, L3½ inch x 3½ inch x ⅜ inch x 40 ft. 5 EA $ $

Angle, L3½ inch x 3 inch x ⅜ inch x 40 ft. 20 EA $ $

Angle, L3½ inch x 2½ inch x ⅜ inch x 40 ft. 10 EA $ $

Angle, L3 inch x 3 inch x ⅜ inch x 40 ft. 25 EA $ $

Notes: All materials will be ASTM-A36 unless otherwise specified in each line item description.

TOTAL = $

*All quotes shall be emailed to benjamin.j.kimbell@usace.army.mil.

STATEMENT OF WORK

1. References:

A. AISC, Steel Construction Manual (Thirteenth Edition) B. ASTM A6/A6M (Standard Specification for General Requirements for Rolled

Structural Steel Bars, Plates, Shapes, and Sheeting Piling)

2. Appendix: Schedule of Steel

3. Scope Work:

Provide quantities and types of steel as identified in the Appendix (below).

All Steel must be made with Mill Certification Papers Required.

Tolerances for variations in thickness, width, length, camber, profile, flatness and sweep shall be in accordance with Reference “A” and “B”.

Final product shall be clean and free of any oil or grease, dross, slag or burrs. All cut edges (regardless of method) shall have a surface roughness acceptable for welding.

Final product shall be legibly marked with the applicable designation, grade, heat number, size and thickness, and name, brand, or trademark of the manufacturer for identification and shipment.

Bundle and band the steel material (except beams) in similar types/sizes for shipping and offloading with a forklift and/or crane. The fabricator/supplier shall use special care to avoid bending, twisting or otherwise distorting the final product. Covering of the material during shipment is not required.

Cost for delivery must be included.

4. Delivery Date: Request delivery of all material identified in the scope of work within 14 calendar days of award. Soonest possible delivery is requested.

5. Deliver Schedule of Steel Line Item No.’s 1 thru 6, and 13 (Listed in Appendix) to:

25549, 182nd St., Pleasant Valley, IA, 52767. Delivery will be coordinated with Structures Maintenance Supervisor(s), Jeff Brondyke, at 309-846-0889.

Deliver Schedule of Steel Line Item No.’s 7 thru 12, 14 & 15 (Listed in Appendix) to:

909 W. Lock and Dam Rd., Quincy, IL 62305. Delivery will be coordinated with Structures Maintenance Supervisor(s), Jeff Brondyke, at 309-846-0889.

The following have been deleted:

52.225-1 Buy American--Supplies MAY 2014

(End of Summary of Changes)