Technical Specifications_Redacted.pdf

TECHNICAL SPECIFICATIONS

MCNARY ADULT COLLECTION CHANNEL TRANSVERSE STOPLOG METAL PURCHASE

1.0 INTENT

The following specifications pertain to the purchase of metal stock and pre-cut items for use in building eight new Adult Collection Channel Transverse Stoplogs at McNary Dam. McNary personnel will fabricate the stoplogs.

2.0 SCOPE

The successful bidder shall be required to deliver the metal stock and pre-cut items as specified to McNary Lock and Dam by the date shown in Section “Shipment and Delivery”.

3.0 SPECIFICATIONS

All raw material will be domestic manufacture and come with certificates of mill test results. See table below and attached drawings for details. Each item’s cut dimensions, shown here and in the drawing require a tolerance of +⅟- 16, -⅟16,” (+0.0625/-0.0625 inch) unless otherwise stated in the attached drawing.

Item Number QTY NAME MATERIAL DIMENSION

1 32 WIDE FLANGE W12x79, A36 215-1/2 2 8 SKIN PLATE 5/16 PLT, A36 80 x 215-1/2 3 8 TOP PLATE 5/16 PLT, A36 215-1/2 x 12-3/8, SEE DETAIL 4 8 BOTTOM PLATE 5/16 PLT, A36 215-1/2 x 12-3/8, SEE DETAIL 5 16 PERFORATED END PLATE 1/2 PLT, A36 80 x 15, SEE DETAIL 6 72 STIFFENER PLATE 1/4 PLT, A36 21-13/16 x 12-1/4, SEE DETAIL

7 16 ROUND BAR 1" DIAM ROUND, A36 17-3/4, SEE DETAIL

8 16 SEAL BAR - NARROW 1/4 x 2-1/2 BAR, SS 304 80 9 8 SEAL BACKER BAR - NARROW 1/4 x 2-1/2 BAR, A36 80

10 8 SEAL BACKER BAR - THICK 1/2 x 2-1/2 BAR, A36 80 11 48 END PLATE 5/16 PLT, A36 21 13/16 x 12 1/4, SEE DETAIL 12 32 PARTIAL END PLATE 5/16 PLT, A36 5 11/16 x 10 3/4, SEE DETAIL 13 32 PARTIAL STIFFENER PLATE 1/4 PLT, A36 5 11/16 x 10 3/4, SEE DETAIL 14 16 BOTTOM SEAL BAR 1/4 x 1-1/2, SS 304 211-1/4, SEE DETAIL AND NOTE*

*Note: Item 14 may be supplied in two short sections, each 105-5/8” (+0, -1/8) long. If supplying Item 14 in shorter sections total quantity for Bottom Seal Bar Halves would be 32.

4.0 SUBMITTALS

Before acceptance, certificates of mill test results must be submitted for all material.

5.0 SHIPPING AND DELIVERY

All items shall be delivered FOB Destination to McNary Lock and Dam No Later Than Twelve (12) weeks after award. The contractor shall be responsible for packing and shipping the components in a manner that will ensure undamaged and complete arrival. The contractor shall provide 48 hour advance notice of shipment. No shipments are allowed other than during normal business hours of Monday -Thursday 7:00AM-3PM, excluding holidays.

Shipments received after 3pm shall not be unloaded due to quantity being purchased. Materials shall be properly supported for shipping. Warped/bent/damaged items will not be accepted.

All shipments shall be delivered to:

McNary Lock and Dam 82790 Devore Rd.

Umatilla, OR. 97882