A.01.30_Technical_Specifications.pdf

BID ITEM LIST LITTLE GOOSE LOCK AND DAM

35 TON LOWBOY TRAILER

BID ITEM LIST

ITEM DESCRIPTION QUANTITY U/M U/P AMOUNT

1 35 ton Lowboy Trailer 1 EA

In addition to your bid, please answer each of the following questions:

EVALUATION FACTOR 1:

Check one—

This bid is based on the Brand Name listed in the specifications.

This bid is based on a product equivalent to the Brand Name listed in the specifications AND descriptive materials regarding the proposed product are attached.

EVALUATION FACTOR 2:

Check one—

This bid includes meeting the delivery requirement of six (6) weeks after contract award.

This bid does not include meeting the delivery requirement of six (6) weeks after contract award. Delivery will be longer than _____weeks after contract award.

TECHNICAL SPECIFICATIONS

35 ton Traveling Axle Trailer

1.0 INTENT

The following specifications pertain to the purchase of a new 35 ton Lowboy

Trailer. This trailer shall allow the project to move large/heavy objects in excess of 25 tons. This equipment will be utilized for movement of equipment/parts as part of the intake gate refurbishment project.

2.0 SCOPE

The successful bidder shall provide one traveling axle trailer with a capacity of 35 tons.

The project’s current method of moving large/heavy objects is to utilize the project flatbed truck which has a max load capacity of 24,995 lbs (12.5 tons). This does not allow for efficient movement of items when they are necessary to complete a job. By increasing to a 35 ton lowboy truck the project would gain greater efficiencies for movement of project equipment when performing task. 3.0 SPECIFICATIONS

3.1 Lowboy Trailer, Kaufman Trailers 35 Ton Detachable Gooseneck Spring Ride Trailer or approved equivalent

3.1.1 The trailer shall be a Lowboy Goose Neck Trailer.

3.1.2 The trailer shall have a 35 ton payload capacity.

3.1.3 The trailer shall have a 26 to 40 foot lower deck with a maximum overall length of 50 ft.

3.1.4 The trailer shall include one or more integrated tie downs methods.

3.1.5 The trailer shall have a full width top deck.

3.1.6 The trailer shall have oak or other approved hardwood flooring.

4.0 WARRANTY

All items shall be covered by a minimum one-year warranty on all parts, labor, and workmanship from factory defects.

5.0 SUBMITTLES

Descriptive materials (brochures, illustrations, drawings, data sheets, etc.) must be submitted which will allow the Contracting Officer to determine, without discussion with the offerer, whether the products being offered meets all of the required specifications. Submittals shall include copies of manufactures catalog cut sheet, specification sheets, and warranty.

. 6.0 OPERATION AND MAINTENANCE MANUALS

6.1 Four (4) complete copies of the Operation and Maintenance Manual shall be provided.

6.2 The manuals shall include instructions on the operation, maintenance, repair, troubleshooting, warranty of the system, and a list of recommended spare parts.

6.3 Any information pertaining to models or components not supplied under this contract shall be crossed out.

6.4 Also included shall be the name, phone and fax numbers, and email address of the contractor, manufacturer, and a distributor where spare parts can be purchased.

6.5 The following identification shall be inscribed on the covers:

OPERATING AND MAINTENANCE INSTRUCTIONS Contract name LITTLE GOOSE DAM Name of the Contractor 7.0 SHIPMENT AND DELIVERY

7.1 All items shall be delivered FOB destination to Little Goose Lock and Dam no later than 30 SEP 2017.

7.2 The contractor shall be responsible for packing and shipping the components in a manner that will ensure undamaged and complete arrival to

Little Goose Lock and Dam.

7.3 No shipments are allowed other than normal business hours of Monday through Thursday 7:00 a.m. - 4:00 p.m., excluding Federal holidays.

Suggested Vendor Peters & Keatts Equipment Inc.

16915 Hatwai Bypass Lewiston, ID 83501 208-743-0866