16-B-0007_Amend_0002_LGA_Fish_Ladder_Window_Cleaner_Upgrade.pdf

W68SBV53454093

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to change the description of parts on Draw ing Sheets M-402 and M-405. See summary of changes, 252.236-7001 CONTRACT DRAWINGS AND SPECIFICATIONS and attached draw ings sheets.

Bid due date remains unchanged: Friday, May 20, 2016 @ 2pm PST.

All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 16-May-2016

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912EF-16-B-0007

X 9B. DATED (SEE ITEM 11)

12-Apr-2016

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

A0002

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

16-May-2016

CODE

USAED, WALLA WALLA - CONTRACTING DIV.

CYNTHIA H JACOBSEN

201 N. THIRD AVE

WALLA WALLA WA 99362-1876

W912EF 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912EF-16-B-0007

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

Little Goose Fish Ladder Window Cleaner Upgrade

DRAWINGS:

Drawing Number: LGF-1-3-3/5 Sheet Number: M-402 Revision Number: A Description of Change: Changed the description of parts 10 and 11 from “BUSHING” to “KEYWAY”

Drawing Number: LGF-1-3-3/8 Sheet Number: M-405 Revision Number: A Description of Change: Changed the description of parts 9 and 10 from “BUSHING” to “KEYWAY”

Changes notated in brackets [ ] on drawing sheets.

SECTION 00700 - CONTRACT CLAUSES

The following have been modified:

252.236-7001 CONTRACT DRAWINGS AND SPECIFICATIONS (AUG 2000)

(a) The Government will provide to the Contractor, without charge, one set of contract drawings and specifications, except publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by the Contracting Officer.

(b) The Contractor shall--

(1) Check all drawings furnished immediately upon receipt;

(2) Compare all drawings and verify the figures before laying out the work;

(3) Promptly notify the Contracting Officer of any discrepancies;

(4) Be responsible for any errors that might have been avoided by complying with this paragraph (b); and

(5) Reproduce and print contract drawings and specifications as needed.

(c) In general--

(1) Large-scale drawings shall govern small-scale drawings; and

(2) The Contractor shall follow figures marked on drawings in preference to scale measurements.

(d) Omissions from the drawings or specifications or the misdescription of details of work that are manifestly necessary to carry out the intent of the drawings and specifications, or that are customarily performed, shall not relieve the Contractor from performing such omitted or misdescribed details of the work. The Contractor shall perform such details as if fully and correctly set forth and described in the drawings and specifications.

(e) The work shall conform to the specifications and the contract drawings identified on the following index of drawings:

Drawing Number

Sheet Number

Title

Revision Number

Date

LITTLE GOOSE LOCK AND DAM

GENERAL

LGG-1-0-1/386 G-001 COVER SHEET AND LOCATION MAPS

LGG-1-0-1/387 G-002 INDEX TO DRAWINGS

MECHANICAL

LGF-1-3-3/2 M-101 FISH VIEWING / COUNTING - WINDOW

CLEANERS

LGF-1-3-3/3 M-201 FISH VIEWING / COUNTING - WINDOW

CLEANERS - ELEVATION

LGF-1-3-3/4 M-401 FISH VIEWING WINDOW CLEANER -

ASSEMBLY

LGF-1-3-3/5 M-402 FISH VIEWING WINDOW CLEANER - BRUSH

HEAD ASSEMBLY

A 05/16/2016

LGF-1-3-3/6 M-403 FISH VIEWING WINDOW CLEANER -

PNUEMATIC CONTROL VALVES

LGF-1-3-3/7 M-404 FISH COUNTING WINDOW CLEANER -

ASSEMBLY ISOMETRIC VIEWS

LGF-1-3-3/8 M-405 FISH COUNTING WINDOW CLEANER - BRUSH

HEAD ASSEMBLY

A 05-16-2016

LGF-1-3-3/9 M-406 FISH COUNTING WINDOW CLEANER -

PNUEMATIC CONTROL VALVES

LGF-1-3-3/10

M-501

FISH VIEWING AND COUNTING - WINDOW -

CLEANER CYLINDER - SUPPORT BRACKET

MODIFICATION

LGF-1-3-3/11 M-502 FISH VIEWING AND - COUNTING WINDOW -

CLEANER BRUSHES

LGF-1-3-3/12 M-503 FISH COUNTING WINDOW - HEAD PIVOT

BRACKET

LGF-1-3-3/13 M-504 FISH COUNTING WINDOW - HEAD PIVOT

BRACKET PARTS

LGF-1-3-3/14 M-505 FISH COUNTING WINDOW - PIVOT HEAD

PARTS - 1 OF 2

LGF-1-3-3/15 M-506 FISH COUNTING WINDOW - PIVOT HEAD

PARTS - 2 OF 2

LGF-1-3-3/16 M-901 PHOTOGRAPHS

ELECTRICAL

LGF-1-6-3/1 E-101 FISH VIEWING / COUNTING - WINDOW

CLEANERS - ELECTRICAL PLAN

LGF-1-6-3/2 E-501 FISH WINDOW CLEANER - ELECTRICAL

CONTROL PANEL - DETAIL

LGF-1-6-3/3 E-601 PROCESS & INSTRUMENTATION - DIAGRAM

FOR INFORMATION ONLY (FIO)

The Government does not warrant the accuracy of the FIO drawings. The Government recommends that the Contractor verify the accuracy of FIO drawings.

LGF-1-3-4/6 FIO-001

FISH VIEWING - WINDOW CLEANERS - LITTLE

GOOSE DAM - PARTIAL PLAN & DETAILS

6885-11 FIO-002

FISH VIEW WINDOW CLEANERS - SOUTH

VIEWING ROOM INSTALLATION - WINDOWS A-

6, A-7, A-8 & A-9

6885-12 FIO-003

FISH VIEW WINDOW CLEANERS - SOUTH

COUNTING ROOM - INSTALLATION - WINDOW

A-5

6885-1 FIO-004

FISH VIEWING WINDOW CLEANERS - DETAILS

- PCS 10, 13, 16, 34 & 37

6885-2 FIO-005

- PCS 18, 45

6885-3 FIO-006

- PC 7, 9 & CYLMOUNT A5

6885-4 FIO-007 FISH VIEW WINDOW CLEANERS

(End of Drawing List)

(End of clause)

Contract drawings created on CAD will be available in electronic form for use by the Contractor. No For Information Only drawings are available on CAD. The Contractor assumes all risks associated in using electronic CAD drawings. The contract drawings shall govern if there are any discrepancies between the electronic copy and the contract drawing. The Contractor shall promptly notify the Contracting Officer of any discrepancies. The Government will not be respon sible to correct the electronic CAD drawing. If contract modifications are issued, the associated electronic CAD drawings will not be available to the Contractor. Electronic copies of CAD drawings are only available in Bentley MicroStation format. The Government will provide the files on CD ROM.

(End of Summary of Changes)