Work Benches.docx

1. Are the items available on GSA Schedule?

2. Where are the items manufactured?

3. What is the lead time for the items/quantities listed?

1.1 WB-1: Technical Workbench, Metal/Wood

Individual Workstation Dimensions: 60”W x 36”D x 36”H

Item images are for general illustration purposes only and not an exact representation of the requirement.

Contractor shall:

*Coordinate layout with existing windows, wall-mounted data boxes, etc., as applicable.

*Provide shop drawings and coordinate approvals with end user for all workbenches post award and prior to order.

*Contractor shall field verify dimensions for all items.

Components:

a. Unit consists of frame-supported worksurface, fully welded steel frame, stretchers.

b. 60”W x 36”D Rectangular worksurface

i. Butcherblock worksurface shall be 1-1/2” thick

ii. If the manufacturer’s butcher block isn’t 1.5” thick, what thickness can be provided?

iii. Worksurface shall provide a 2” overhang on the front (user) side of the worksurface

iv. Each workbench shall have 2” tubular steel posts

v. Shall be fixed height

c. (2) Full depth horizontal stretchers below worksurface depth

d. (1) Full width horizontal stretcher below worksurface width if required by manufacturer

i. Stretchers must allow the depth of Item FM-2 mobile box/box/box to stow beneath the depth of the worksurface

e. Heavy-duty leveling casters

f. Does the manufacturer have heavy-duty, swiveling, hard nylon casters lockable with a leveling thumbwheel, suitable for hard surface flooring?

i. Swiveling, lockable

ii. For hard surface flooring

g. 1000 lb evenly distributed load capacity

h. Item must be from same manufacturer as Item FM-2 and FM-2A

i. All worksurfaces shall be wood. Supports shall be metal.

Finish:

a. Wood: Manufacturer’s standard sealed natural maple hardwood butcher block selection

b. Metal: Manufacturer’s standard powder coat paint selection shall include white

1.2 WB-2: Technical Workbench, Metal/Wood

Individual Workstation Dimensions: 48”W x 30”D x 60”-66”H

Plan View Concept

Item images are for general illustration purposes only and not an exact representation of the requirement.

*Verify all electrical connections, i.e., plug/outlet type required and accessory items as needed.

*Provide shop drawings and coordinate approvals with end user for all workbenches post award and prior to order.

*Coordinate with the customer post award and prior to order which side the power cord should exit the workbench.

*Contractor shall field verify dimensions for all items.

Components:

a. Unit consists of frame-supported worksurface, fully welded single-sided steel frame, stretchers.

b. 48”W x 30”D Rectangular worksurface

i. Shall be height adjustable from 30”- 36.5”H

c. 60”-66”H Uprights

i. Each workbench shall have 2” tubular steel posts

d. (2) 30” Horizontal stretchers below worksurface depth

e. (1) 48” Horizontal stretcher below worksurface width if required by manufacturer

i. Stretchers must allow the depth of Item FM-2 and FM-2A mobile box/box/box to stow beneath the depth of the worksurface

f. Leg levelers adjust to raise/lower top

i. Height adjustment, 6” minimum

g. Full width 12”D wood shelf above worksurface

i. Shelf shall support a weight capacity of 150 pounds

ii. Adjustable height, removable shelf support brackets

iii. Shelf shall be adjustable in 2” increments from top of uprights to 12” above the worksurface.

iv. Shelf shall match the butcherblock worksurface

h. Provide full width column-mounted electrical beam/strip:

i. (4) Duplex outlets (or 8 simplex outlets), minimum

ii. Outlets shall be evenly distributed across the width of the worksurface

iii. Electrical beam/strip shall be approximately 12” above the worksurface

i. Power cord shall be routed through a vertical cord manager or through the leg

i. Power cord shall plug-in at wall or floor

ii. Provide power cord long enough to reach power source, 6’-0” minimum

iii. Contractor shall verify with customer post award and prior to ordering at which rear leg the power cord shall exit

j. Vertical Cable/Wire management

i. Worksurface and shelf shall provide ½” clear space behind the upright posts (see plan view concept above).

ii. This clear space will provide a 1” void for cable management when two workbenches are installed abut flush back-to-back

iii. If unable to provide a clear space for vertical cable management as described above, how would the manufacturer provide vertical cable management?

k. Heavy-duty leveling casters

i. Swiveling, lockable

ii. For hard surface flooring

iii. Does the manufacturer have heavy-duty, swiveling, hard nylon casters lockable with a leveling thumbwheel, suitable for hard surface flooring?

iv. Would the item still achieve a worksurface height range of 30-36.5” AFF after the casters are installed (on items that require being height adjustable)?

l. 1200 lb evenly distributed load capacity

m. Item must be from same manufacturer as Item FM-2 and FM-2A

n. All worksurfaces shall be wood. Supports shall be metal.

Finish:

a. Wood: Manufacturer’s standard sealed natural maple hardwood butcherblock selection

b. Metal: Manufacturer’s standard powder coat paint selection shall include white

c. Power Cord: Manufacturer’s selection shall include white

1.3 WB-2E: Technical Workbench, Metal/Wood

Individual Workstation Dimensions: 48”W x 31–3/8”D x 60”-66”H

*Shall be the same as WB-2, except for dimensions and the following:

Components:

a. 48”W x 31–3/8”D Rectangular worksurface

i. How much more (approximately) does the 31-3/8” depth cost compared to a 30” depth?

ii. Top of worksurface shall be installed at 36.5” AFF

b. Provide (1) duplex outlet on the interior of each rear column leg below the worksurface, for a total of (2) duplex outlets

i. The interior mounting of the duplex outlets shall allow workbenches to abut flush back-to-back and side-to-side

ii. If unable to provide interior mounting of duplex outlets as described above, how would manufacturer provide a minimum of (2) duplex or (4) simplex outlets under the worksurface?

1.4 WB-3: Technical Workbench, Metal/Wood

*Shall be same as WB-2, except as follows:

*Contractor shall field verify dimensions for all items.

Components:

a. 60”W Rectangular worksurface

1.5 WB-3E: Technical Workbench, Metal/Wood

Individual Workstation Dimensions: 60”W x 31–3/8”D x 60”-66”H

*Shall be the same as WB-2, except for dimensions and the following:

Components:

a. 60”W x 31–3/8”D Rectangular worksurface

i. How much more (approximately) does the 31-3/8” depth cost compared to a 30” depth?

ii. Top of worksurface shall be installed at 36.5”AFF

b. Provide (1) duplex outlet on the interior of each rear column leg below the worksurface, for a total of (2) duplex outlets

i. The interior mounting of the duplex outlets shall allow workbenches to abut flush back-to-back and side-to-side

ii. If unable to provide interior mounting of duplex outlets as described above, how would manufacturer provide a minimum of (2) duplex or (4) simplex outlets under the worksurface?

1.6 WB-4E: Technical Workbench, Metal/Wood

Individual Workstation Dimensions: 72”W x 31–3/8”D x 60”-66”H

*Shall be the same as WB-2, except for dimensions and the following:

Components:

a. 72”W x 31–3/8”D Rectangular worksurface

i. How much more (approximately) does the 31-3/8” depth cost compared to a 30” depth?

ii. Top of worksurface shall be installed at 36.5” AFF

b. Provide (1) duplex outlet on the interior of each rear column leg below the worksurface, for a total of (2) duplex outlets

i. The interior mounting of the duplex outlets shall allow workbenches to abut flush back-to-back and side-to-side

ii. If unable to provide interior mounting of duplex outlets as described above, how would manufacturer provide a minimum of (2) duplex or (4) simplex outlets under the worksurface?

1.7 WB-11: Technical Workbench, Metal/Wood

*Shall be same as WB-1, except as follows:

Components:

a. Item shall provide a 48”W x 24”D rectangular worksurface

i. Overhang not required

b. Item shall adjust in height from 30-36”H

1.8 WB-13: Technical Workbench, Metal/Wood

*Shall be same as WB-1, except as follows:

Components:

a. Item shall provide a 48”W x 30”D rectangular worksurface

i. Overhang not required

b. Item shall adjust in height from 30-36”H

1.9 WB-14: Technical Workbench, Metal/Wood

*Shall be same as WB-1, except as follows:

Components:

a. Item shall provide a 60”W x 30”D rectangular worksurface

i. Overhang not required

b. Item shall adjust in height from 30-36”H

1.10 WB-15: Technical Workbench, Metal/Wood

*Shall be same as WB-1, except as follows:

Components:

a. Item shall provide a 48”W x 36”D rectangular worksurface

i. Overhang not required

b. Item shall adjust in height from 30-36”H

1.11 WB-16: Technical Workbench, Metal/Wood

Individual Workstation Dimensions: 60”W x 36”D x 30-36.5”H

Item images are for general illustration purposes only and not an exact representation of the requirement.

*Provide shop drawings and coordinate approvals with end user for all workbenches post award and prior to order.

*Contractor shall field verify all dimensions for all items.

Components:

a. Unit consists of frame-supported worksurface, fully welded steel frame, stretchers.

b. 60”W x 36”D Rectangular worksurface

i. Each workbench shall have 2” tubular steel posts

ii. Shall be adjustable height from 30-36”H

c. (2) Full depth horizontal stretchers below worksurface depth

d. (1) Full width horizontal stretcher below worksurface width if required by manufacturer

i. Stretchers must allow the depth of Item FM-2 mobile box/box/box to stow beneath the depth of the worksurface

e. Heavy-duty leveling casters

i. Swiveling, lockable

ii. For hard surface flooring

f. 1000 lb. evenly distributed load capacity

g. Item must be from same manufacturer as Item FM-2 and FM-2A

h. All worksurfaces shall be wood. Supports shall be metal.

Finish:

a. Wood: Manufacturer’s standard sealed natural maple hardwood butcherblock selection

b. Metal: Manufacturer’s standard powder coat paint selection shall include white

1.12 WB-16E: Technical Workbench, Metal/Wood

Individual Workstation Dimensions: 63-1/2”W x 31-3/8”D x 30-36.5”H

*Verify all electrical connections, i.e., plug/outlet type required and accessory items as needed.

*Coordinate with the customer post award and prior to order which side the power cord should exit the workbench.

*Shall be the same as WB-16, except for dimensions and the following:

Components:

a. 63-1/2”W x 31-3/8”D Rectangular worksurface

i. How much more (approximately) does the 63-1/2”W x 31-3/8” cost compared to a 60”W x 30” depth?

ii. Worksurface shall provide 3.25” overhang on left and right sides for clamping by users, 6.5” overhang total

iii. Top of worksurface shall be installed at 36.5”AFF

b. Provide (1) duplex outlet on the interior of each rear column leg below the worksurface, for a total of (2) duplex outlets

i. The interior mounting of the duplex outlets shall allow workbenches to abut flush back-to-back and side-to-side

ii. If unable to provide interior mounting of duplex outlets as described above, how would manufacturer provide a minimum of (2) duplex or (4) simplex outlets under the worksurface?

c. Power cord shall be routed through a vertical cord manager or through the leg

i. Power cord shall plug into power at wall or floor

ii. Provide power cord long enough to reach power source

iii. Contractor shall verify with customer post award and prior to ordering, at which rear leg the power cord shall exit

Finish:

a. Power Cord: Manufacturer’s selection shall include white

1.13 WB-17: Technical Workbench, Metal/Wood

Item images are for general illustration purposes only and not an exact representation of the requirement.

*Shall be same as WB-1, except as follows:

Components:

a. Item shall provide a 96”W x 36”D rectangular worksurface

i. Overhang not required

b. Item requires double sided posts

c. Item shall provide clear knee width space to accommodate end users seated on either side and the FM-2

d. Item shall adjust in height from 30-36”H

1.14 WB-18: Technical Workbench, Metal/Wood

Item images are for general illustration purposes only and not an exact representation of the requirement.

*Shall be same as WB-1, except as follows:

a. Item shall provide a 84”W x 42”D X 30-36”H rectangular worksurface

i. Overhang not required

b. Item shall provide clear knee width space to accommodate end users seated next to one another on one side

c. Item shall adjust in height from 30-36”H

1.15 WB-19: Technical Workbench, Metal/Wood

*Shall be same as WB-1, except as follows:

Components:

a. Item shall provide a 48”W x 48”D rectangular worksurface

i. Overhang not required

b. Item shall adjust in height from 30-36”H

1.16 WB-20: Technical Workbench, Metal/Wood

*Shall be same as WB-1, except for overall dimensions and the following:

Components:

a. Item shall provide a 72”W x 48”D rectangular worksurface

i. Overhang not required

b. Item shall adjust in height from 30-36”H

1.17 WB-31: Technical Workbench, Metal/Epoxy Resin

*Shall be same as WB-1, except as follows:

Components:

a. Item shall provide a 60”W x 30”D rectangular worksurface

i. Overhang not required

b. Worksurface shall be non-porous, epoxy resin, and chemical resistant

i. Worksurface must be appropriate to withstand chemicals used in the production of circuit boards

ii. Worksurface must be resistant to the following chemicals including, but not limited to: etching acids, lead, copper sulfate, copper nitrate, zinc nitrate, sodium nitrate, tin, bleach, ammonium hydroxide, various epoxies and acetic acid

c. Item shall adjust in height from 30-36”H

Finish:

a. Epoxy Resin: Manufacturer’s standard non-porous, chemical resistant selection shall include gray in a smooth matte finish

1.18 WB-32: Technical Workbench, Metal/Epoxy Resin

*Shall be same as WB-1, except as follows:

Components:

a. Item shall be 60”W x 36”D

i. Overhang not required

b. Worksurface shall be non-porous, epoxy resin, and chemical resistant

i. Worksurface must be appropriate to withstand chemicals used in the production of circuit boards

ii. Worksurface must be resistant to the following chemicals including, but not limited to: etching acids, lead, copper sulfate, copper nitrate, zinc nitrate, sodium nitrate, tin, bleach, ammonium hydroxide, various epoxies and acetic acid

c. Item shall adjust in height from 30” - 36”H

Finish:

a. Epoxy Resin: Manufacturer’s standard non-porous, chemical resistant selection shall include gray in a smooth matte finish

1.19 WB-33: Technical Workbench, Metal/Epoxy Resin

*Shall be same as WB-1, except as follows:

Components:

a. Item shall provide a 72”W x 30”D rectangular worksurface

i. Overhang not required

b. Worksurface shall be non-porous, epoxy resin, and chemical resistant

i. Worksurface must be appropriate to withstand chemicals used in the production of circuit boards

ii. Worksurface must be resistant to the following chemicals including, but not limited to: etching acids, lead, copper sulfate, copper nitrate, zinc nitrate, sodium nitrate, tin, bleach, ammonium hydroxide, various epoxies and acetic acid

c. Item shall adjust in height from 30” - 36”H

Finish:

a. Epoxy Resin: Manufacturer’s standard non-porous, chemical resistant selection shall include gray in a smooth matte finish

1.20 WB-34: Technical Workbench, Metal/Epoxy Resin

*Shall be same as WB-2, except as follows:

Components:

a. Item shall provide a 60”W x 36”D rectangular worksurface

b. Worksurface shall be non-porous, epoxy resin, and chemical resistant

i. Worksurface must be appropriate to withstand chemicals used in the production of circuit boards

ii. Worksurface must be resistant to the following chemicals including, but not limited to: etching acids, lead, copper sulfate, copper nitrate, zinc nitrate, sodium nitrate, tin, bleach, ammonium hydroxide, various epoxies and acetic acid

Finish:

a. Epoxy Resin: Manufacturer’s standard non-porous, chemical resistant selection shall include gray in a smooth matte finish

1.21 FM-2: Technical Workbench File Pedestal, Metal/Wood

Overall Dimensions: 15”W x 23”D x to approx. 27-3/4”H

Item images are for general illustration purposes only and not an exact representation of the requirement.

a. 23”D Mobile box/box/box pedestal with butcher block wood top

i. Butcherblock top shall be 1-1/2” thick

b. (3) Equal height drawers

c. (1) Metal grab bar on front of pedestal to easily pull item

d. If manufacturer doesn’t have a “grab bar” option similar to the design intent photo, how would the manufacturer propose to fulfill a requirement for the item to be easily pulled/tugged/moved when fully loaded with heavy equipment?

e. Item shall be able to fully stow below 30”h workbenches

f. Item shall have a fully finished back

g. Welded construction chassis

h. Full extension ball bearing heavy-duty glides

i. Counterweight

j. Locking, keyed alike with master key

i. Each drawer shall have an interchangeable pin tumbler lock

ii. 75 lb weight capacity per drawer

k. 400 lb weight capacity overall

l. Item shall be from the same manufacturer as the WB workbenches

m. Chassis and drawers shall be steel, top shall be butcher block

n. (4) Swivel casters with locking brakes

o. What is the maximum height pedestal you can provide that will meet the requirements above and still allow the ped to stow completely below the shortest of the workbenches at 30” AFF?

Finish:

a. Wood: Manufacturer’s standard sealed natural maple hardwood butcher block selection

b. Metal: Manufacturer’s standard powder coat paint selection shall include white

c. Pulls: Manufacturer’s standard selection recessed metal

1.22 FM-2a: Technical Workbench File Pedestal, Metal/Epoxy Resin

*Shall be same as FM-2, except as follows:

Components:

a. Top of item shall be non-porous, epoxy resin, and chemical resistant

i. Worksurface must be appropriate to withstand chemicals used in the production of circuit boards

ii. Worksurface must be resistant to the following chemicals including, but not limited to: etching acids, lead, copper sulfate, copper nitrate, zinc nitrate, sodium nitrate, tin, bleach, ammonium hydroxide, various epoxies and acetic acid

Finish:

a. Epoxy Resin: Manufacturer’s standard non-porous, chemical resistant selection shall include gray in a smooth matte finish image3.png image4.png image5.png image6.png image7.png image1.jpeg image2.png