Amendment_01_-W912DY19Q0060_-_Bavaria,_Germany_Multi_Buildings_Appliances.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to do the follow ing:

a) Incorporate revised attachment 1's for bldg.241 and bldg. 720 dated, 25 January 2019.

b) Incorporate a revised attachment 2, Furniture Item Descriptions (FID), dated 25 Janurary 2019.

c) All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 2

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912DY19Q0060

X 9B. DATED (SEE ITEM 11)

16-Jan-2019

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

U0001

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

28-Jan-2019

CODE

US ARMY ENGINEERING & SUPPORT CENTER

HUNTSVILLE ENGINEERING & SUPPORT CENTER

P.O. BOX 1600

HUNTSVILLE AL 35807-4301

W912DY 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

Attachment #1 Page 1 of 1

W D H

1 43 Table Lamp, EXPORT 4.1 See FID Requirements Required $0.00

2 35 Refrigerator/Freezer, EXPORT 8.5 See FID Requirements Required $0.00 3 35 Microwave, EXPORT 8.6 See FID Requirements Required $0.00 4 1 Range, 24" EXPORT 8.15 See FID Requirements Required $0.00

5 5

Washing Machine, Electric, Top Load, EXPORT

8.8 See FID Requirements Required

$0.00

6 6 Clothes Dryer, Electric, EXPORT 8.9 See FID Requirements Required $0.00 $0.00

1 $0.00 1 $0.00 1 $0.00

$0.00 Discounted

Total $0.00

GSA Contract Unit Cost is the cost provided on GSA schedule per item. HNC Unit Cost is the cost provided to HNC per item.

Vendors may quote the cited brand and model number or an approved equal, vendors are not required to quote the cited brand and model number as long as an approved equal is quoted.

GRAND TOTAL:

p p , q p p p p , p cost of open market item(s).

Installation & Shipping: Subtotal:

Shipping charges - CONUS Shipping charges - OCONUS Offload only

VAT

Cut Sheet Model Quoted

Vendor Quoted

USAG Bavaria, Germany- Building 241

SLEEPING AND LIVING AREA

HNC Total Cost

FID

Para

Description HNC Unit

Cost Additional

Information# Qty Dimension

REV 1-25-19

Attachment #1 Page 1 of 1

W D H

1 150 Table Lamp, EXPORT 4.1 See FID Requirements Required $0.00

2 77 Refrigerator/Freezer, EXPORT 8.5 See FID Requirements Required $0.00 3 77 Microwave, EXPORT 8.6 See FID Requirements Required $0.00

4 18

Washing Machine, Electric, Top Load, EXPORT

8.8 See FID Requirements Required

$0.00

5 21 Clothes Dryer, Electric, EXPORT 8.9 See FID Requirements Required $0.00 $0.00

1 $0.00 1 $0.00 1 $0.00

$0.00 Discounted

Total $0.00

GSA Contract Unit Cost is the cost provided on GSA schedule per item. HNC Unit Cost is the cost provided to HNC per item.

Vendors may quote the cited brand and model number or an approved equal, vendors are not required to quote the cited brand and model number as long as an approved equal is quoted.

GRAND TOTAL:

p p , q p p p p , p cost of open market item(s).

USAG Bavaria, Germany - Building 720

SLEEPING AND LIVING AREA

HNC Total Cost

FID

Para

Description HNC Unit

Cost Additional

Information# Qty Dimension

Shipping charges - CONUS

VAT

REV 1-25-19

Shipping charges - OCONUS Offload only

Cut Sheet

Subtotal:

Model Quoted

Vendor Quoted

Installation & Shipping:

UH Army Furnishings Program – Furniture Item Descriptions (FID) USAG Bavaria – Multiple Buildings - Appliances

Attachment 2 Page 1 of 7

Attachment #2

Furniture Item Descriptions (FID)

Unaccompanied Housing (UH)

Attachment 2 Page 2 of 7

TABLE OF CONTENTS PAGE NO.

1. GENERAL

2.-3. NOT USED

4. ELECTRONICS

5-7. NOT USED

8. APPLIANCES

Attachment 2 Page 3 of 7

1. GENERAL

1.1-1.3 Not Used.

1.4 Electrical.

Unless noted otherwise in FID, all electrical requirements shall meet the following requirements:

a. Germany – 220 V, 50 Hz.

b. Dryer/Ranges: – 220/380 V, 50 Hz.

c. Plug type: Schuko unless otherwise noted

d. No power converters permitted.

1.5 Cut Sheets.

Cut sheets are required for this RFQ. All required items and features submitted shall be on a current GSA schedule contract with the exception of UNICOR and Ability One Products. A copy of the current GSA scheduled pricing shall be submitted along with the cut sheets for this RFQ. Items shall conform to the following requirements in order to be considered acceptable for this RFQ:

a. Cut sheets shall be legible with highlighted model numbers, dimensions, warranty information, and all salient features required in the FID.

b. All cutsheets shall be provided in 1-3 searchable PDF documents or other applicable software and be assembled and labeled in numerical order based on the FID section number, ex.: 2.1 Mattress, 3.1 Bed, etc.

c. Label each PDF with the pages contained within, ex.: Vendor’s cutsheets pgs. 1-10, Vendor’s cutsheets pgs. 11-25, etc.

d. Cut sheet shall include color photographs of all fabric selections being submitted for approval. Include fabric content, flame resistance, and abrasion resistance testing.

e. Cut sheets shall include line drawings or images that address all required features.

f. Cut sheets shall clearly state name brand, model numbers, and GSA schedule contract numbers for all items quoted.

g. Cut sheets shall clearly state all required features that have been provided. List all of the features if printed literature is not available. The features may be handwritten on the cut sheet with the name, phone number, and company of the person who is providing the information.

h. Cut sheets which have more than one model, size, type, or which show statement of line options shall be clearly marked to show the model, size, type, and all salient features proposed.

i. PDFs created using scanned documents shall use text recognition (i.e. OCR) to ensure search functions are enabled.

Attachment 2 Page 4 of 7

2.-3. NOT USED

4. ELECTRONICS

All appliances shall be EU listed or be compatible with German standards and requirements for electronic equipment. See FID Section 1.4 for electrical requirements.

4.1 Table Lamp, EXPORT.

a. Shall be 22-25”H.

b. Shall be ginger jar style.

c. Shall contain an integral electronic ballast socket which utilizes an 18-26 W, plug-in, energy efficient fluorescent bulb.

i. Color temperature of bulb shall be between 2700-3500 K

d. The lamp shall be weighted to pass UL 153 tilt test.

e. Provide a switch at the base of the lamp.

f. Lampshade shall be hardback ivory.

g. Lamp base shall be brass color.

h. Shall have C Type Plug.

4.2 Not Used.

4.3 Television, Large Screen, EXPORT.

a. Shall have minimum diagonal screen measurement of 42".

b. Televisions must be multi-region or region-free type.

c. Shall be HDTV LCD / LED.

d. Shall have 16:9 screen aspect ratio.

5.-7. NOT USED

Attachment 2 Page 5 of 7

8. APPLIANCES

All appliances shall be CE marked. The energy efficiency rating shall be provided where applicable. Manufacturer’s warranty shall be provided. Contractor shall verify onsite that clearances are adequate for appliances. Inscriptions on appliances shall be in English or symbols.

8.1 – 8.4 Not Used.

8.5 Refrigerator/Freezer, EXPORT.

• Bosch, KGN33NW30, or equal.

a. Shall be a maximum of 24”W x 26”D x 71”H. Dimensions are critical.

b. Refrigerator/Freezer shall have minimum capacity of 8.9 cu.ft.

c. Refrigerator shall have a minimum of:

i. (2) Full-width adjustable glass or wire shelves in the main compartment

ii. (1) Full-width adjustable glass, plastic, or wire shelf or drawer in the freezer compartment

iii. (1) Crisper

iv. In-door storage

d. Shall be white.

e. Shall be right handed.

f. Provide minimum (1) year warranty for parts and labor.

g. Shall be frost-free.

8.6 Microwave, EXPORT.

• Bosch, HMT72M420, or equal.

• Severin, MW 7873, or equal.

a. Shall be 18-21”W x 13.5-17”D x 11-14” H.

b. Microwave shall have capacity of 0.6 - 1.1 cu.ft.

c. Microwave shall include:

i. Food turntable

ii. Multiple power levels

iii. Minimum 800W.

d. Color shall be white.

e. Provide minimum (1) year warranty for parts and labor.

8.7 Not Used.

8.8 Washing Machine, Electric, Top Load, EXPORT.

Attachment 2 Page 6 of 7

• Maytag, MVW18MNBGW, or Speed Queen, LWNE52SP303UW01, or equal.

a. Shall be 24-27”W x 25-29”D x 38-44”H.

b. Shall have minimum capacity of 2.9 cu.ft.

c. Shall be commercial rated and warranted for laundromat-type or community-housing installations.

d. No coin box shall be provided.

e. Shall have minimum of:

i. (3) Cycles

ii. (3) Wash/Rinse temperatures

iii. Variable water level

iv. Fabric softener dispenser

v. Stainless steel tub

f. Provide all supply hoses, drain lines, connectors, etc. for a functional unit.

g. Color shall be white.

h. Provide minimum (2) year warranty on parts.

8.9 Clothes Dryer, Electric, EXPORT.

• Maytag, MDE18MNAGW, or Speed Queen, LDEE7RGS303UW01, or equal.

a. Shall be 27”W maximum x 28-30”D x 38-44”H.

b. Shall have minimum capacity of 6.5 cu.ft.

c. Shall be commercial rated and warranted for laundromat-type or community-housing installations.

d. No coin box shall be provided.

e. Shall be same manufacturer as washer provided.

f. Shall have minimum of (3) cycles.

g. Provide front-mounted lint screen.

h. Provide all connectors, vent kits, etc. for a functional unit.

i. Provide (3) wire cord with no plug.

j. Provide minimum (2) year warranty on parts.

8.10 – 8.14 Not Used.

8.15 Range, 24", Electric, EXPORT.

• Bosch HSA720120, or equal.

a. Shall be 24”W x 23-24”D x 33-36”H.

b. Shall have capacity of 2.0-3.0 cu.ft.

c. Oven shall have:

Attachment 2 Page 7 of 7

i. Bake and broil elements

ii. (2) Removable racks with a minimum of (3) rack positions

d. Range top shall have (4) ceramic burners.

i. Shall have heat limiting devices

e. Provide removable storage drawer.

f. Color shall be white.

g. Shall include a 5 wire cord.

h. Provide minimum (1) year warranty for parts and labor.

END OF SECTION