Attachment_2_CID_16-402_Maternal_Child_LRMC_Germany.pdf

JSN A5180A PRIVACY CURTAIN

7D215(3), 7D213(3), 7D221(2), 7D223(6), 7D225(6), 7D227(5), 7D222(7), 7D220(7), 7D218(7)

Manufacturer Franklin Fabrics

Series Cubicle curtains

Dimensions Approx. 69"W x 98"H (VERIFY AFTER AWARD)

Curtain pattern is to run vertically

Verify all locations and dimensions of privacy curtains

Locations See above

Quantity 46

Jul-2016

FURNITURE ILLUSTRATION SHEET/ORDER FORM

HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA:

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

Finish: Architex Rx 8006 Beauty

• All materials shall be flame retardant and machine washable without losing flame resistant characteristics

• Curtains, when installed on track, are to hang 12"-16" AFF

• Field verify all existing conditions to include but not limited to existing track heights, ceiling heights, room and track locations, as part of Final Work Plan

• Metal grommets along top edge, spaced every 6"

• Curtains shall be tagged with size of curtain and fire retardancey information

• Approx. 20" Mesh top: Mesh to have 1/2" openings; in locations where tracks are suspended 18" below the ceiling, mesh is not required

• Curtains shall have "easy snap panel edges" along both edges, spaced not more than 4" over center

• Right side hems should have "female" snaps; left side hems should have "male" snaps

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

Landstuhl Regional Medical Center - Mother Baby Unit

NOTE: CEILING HEIGHTS ARE 2.79 meters (approx. 110"H);

CONFIRM IF TRACKS ARE CEILING MOUNTED OR SUSPENDED

Easy Snap Panel Edges

JSN A5180A PRIVACY CURTAIN A203(2), B203(2), B204(2), B217(2), B222(2),

B223(2), B227(2)

Manufacturer Franklin Fabrics

Series Cubicle curtains

Dimensions (Curtain)

Approx. 69"W x 98"H (VERIFY AFTER AWARD)

Locations See above

Quantity 14

Curtain pattern is to run vertically, see image above Verify all locations and dimensions of privacy curtain

FURNITURE ILLUSTRATION SHEET/ORDER FORM

HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA:

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

Finish: Arc Com Ebb-X "Sunshine" #7

• Metal grommets along top edge, spaced every 6"

• Curtains shall be tagged with size of curtain and fire retardancey information

• Approx. 20" Mesh top: Mesh to have 1/2" openings; in locations where tracks are suspended 18" below the ceiling, mesh is not required

• Curtains shall have "easy snap panel edges" along both edges, spaced not more than 4" over center

• Right side hems should have "female" snaps; left side hems should have "male" snaps

• All materials shall be flame retardant and machine washable without losing flame resistant characteristics

Jul-2016

NOTE: CEILING HEIGHTS ARE 2.79 meters (approx. 110"H);

CONFIRM IF TRACKS ARE CEILING MOUNTED OR SUSPENDED

• Curtains, when installed on track, are to hang 12"-16" AFF

• Field verify all existing conditions to include but not limited to existing track heights, ceiling heights, room and track locations, as part of Final Work Plan

Landstuhl Regional Medical Center - Labor & Delivery

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

Easy Snap Panel Edges

A0EDCLMP

Text Box

JSN A5180B

JSN A5180C PRIVACY CURTAIN

7F103(3), 7F104(3), 7F105(3), 7F107(3), 7F109(3), 7F110(3), 7B108(2), 7B112(3), 7B114(2), 7B118(2), 7B120(2), 7B131(2), 7B127(2), 7B124(2), 7B119(3), 7B117(3), 7B109(3), 7B102B(14)

Manufacturer Franklin Fabrics

Series Cubicle curtains

Dimensions (Curtain)

Approx. 69"W x 98"H (VERIFY AFTER AWARD)

Locations See above

Quantity 58

Curtain pattern is to run vertically, see image above Verify all locations and dimensions of privacy curtain

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

Landstuhl Regional Medical Center - OB GYN

Jul-2016

• Curtains shall have "easy snap panel edges" along both edges, spaced not more than 4" over center

• Right side hems should have "female" snaps; left side hems should have "male" snaps

NOTE: CEILING HEIGHTS ARE 2.79 meters (approx. 110"H);

CONFIRM IF TRACKS ARE CEILING MOUNTED OR SUSPENDED

FURNITURE ILLUSTRATION SHEET/ORDER FORM

HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA:

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

Finish: Arc Com Melody-X Mist #1

• All materials shall be flame retardant and machine washable without losing flame resistant characteristics

• Curtains, when installed on track, are to hang 12"-16" AFF

• Field verify all existing conditions to include but not limited to existing track heights, ceiling heights, room and track locations, as part of Final Work Plan

• Metal grommets along top edge, spaced every 6"

• Curtains shall be tagged with size of curtain and fire retardancey information

• Approx. 20" Mesh top: Mesh to have 1/2" openings; in locations where tracks are suspended 18" below the ceiling, mesh is not required

Easy Snap Panel Edges

JSN A6305A SINGLE DRAPERY PANEL

7D215, 7D213, 7D210(2), 7D208(2), 7D206A(2), 7D204(3), 7D207, 7D203, 7D209, 7D222, 7D220, 7D218(3), 7D227, 7D225, 7D223(2), 7D221(2), 7D229

Manufacturer Franklin Fabrics

Series Draperies

Dimensions Existing rod width: approximately 44" Length of drapery: approximately 82"

Curtain pattern is to run vertically

Locations See above

Quantity 26

Jul-2016

• Drapery is unlined

FIELD VERIFY ALL LOCATIONS AND DIMENSIONS AFTER

AWARD

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

Landstuhl Regional Medical Center - Mother Baby Unit

• Curtains should be tagged with size of curtain and fire retardancey information

FURNITURE ILLUSTRATION SHEET/ORDER FORM

HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA:

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

Finish: Architex Rx 8006 Beauty

• All materials shall be flame retardant and machine washable without losing flame resistant characteristics

• Include 0.25 oz. corner square lead weight

• Side hems shall be 1 ½” W double turned and blind stitched. Header shall have a minimum of 4”W double turned with washable buckram tape folded into fabric prior to stitching. Snap tape is sewn into top hem of panel. Bottom hems shall be 4” W double turned and blind stitched.

• All panels shall be tabled to assure square and even hems.

• Multiple width draperies shall be pleated so that joining seams are hidden behind pleats. Half widths shall be placed on the return side of the drapery.

• All fabric repeats shall be matched at seams and match panel to panel

• Drapery panels shall have a minimum of 200% fullness

• Length of drapery panels shall be at least 4" below the window sill

• Ripplefold drapery panels on existing tracks; Field verify existing tracks after award

JSN A6305B SINGLE DRAPERY PANEL 7D202

Manufacturer Franklin Fabrics

Series Draperies

Dimensions Existing rod width: approximately 48" Length of drapery: approximately 82"

Curtain pattern is to run vertically

Locations See above

Quantity 2

FURNITURE ILLUSTRATION SHEET/ORDER FORM

HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA:

• Ripplefold drapery panels on existing tracks; Field verify existing tracks after award

• Length of drapery panels shall be at least 4" below the window sill

• Drapery panels shall have a minimum of 200% fullness

• All fabric repeats shall be matched at seams and match panel to panel

• Multiple width draperies shall be pleated so that joining seams are hidden behind pleats. Half widths shall be placed on the return side of the drapery.

• All panels shall be tabled to assure square and even hems.

• Side hems shall be 1 ½” W double turned and blind stitched. Header shall have a minimum of 4”W double turned with washable buckram tape folded into fabric prior to stitching. Snap tape is sewn into top hem of panel. Bottom hems shall be 4” W double turned and blind stitched.

• Include 0.25 oz. corner square lead weight

• Drapery is unlined

• All materials shall be flame retardant and machine washable without losing flame resistant characteristics

• Curtains should be tagged with size of curtain and fire retardancey information

Jul-2016

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

FIELD VERIFY ALL LOCATIONS AND DIMENSIONS AFTER

AWARD

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

Landstuhl Regional Medical Center - Mother Baby Unit

Finish: Architex Rx 8006 Beauty

JSN A6305C SINGLE DRAPERY PANEL 7D205

Series Draperies

Dimensions Existing rod width: approximately 46" Length of drapery: approximately 82"

Curtain pattern is to run vertically

Locations See above

Quantity 1

FURNITURE ILLUSTRATION SHEET/ORDER FORM

HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA:

• Ripplefold drapery panels on existing tracks; Field verify existing tracks after award

• Length of drapery panels shall be at least 4" below the window sill

• Drapery panels shall have a minimum of 200% fullness

• All fabric repeats shall be matched at seams and match panel to panel

• Multiple width draperies shall be pleated so that joining seams are hidden behind pleats. Half widths shall be placed on the return side of the drapery.

• All panels shall be tabled to assure square and even hems.

• Side hems shall be 1 ½” W double turned and blind stitched. Header shall have a minimum of 4”W double turned with washable buckram tape folded into fabric prior to stitching. Snap tape is sewn into top hem of panel. Bottom hems shall be 4” W double turned and blind stitched.

• Include 0.25 oz. corner square lead weight

• Drapery is unlined

• All materials shall be flame retardant and machine washable without losing flame resistant characteristics

• Curtains should be tagged with size of curtain and fire retardancey information

Jul-2016

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

FIELD VERIFY ALL LOCATIONS AND DIMENSIONS AFTER

AWARD

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

JSN A6305D SINGLE DRAPERY PANEL 7D225

Series Draperies

Dimensions Existing rod width: approximately 40" Length of drapery: approximately 82"

Curtain pattern is to run vertically

Locations See above

Quantity 1

FURNITURE ILLUSTRATION SHEET/ORDER FORM

HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA:

• Ripplefold drapery panels on existing tracks; Field verify existing tracks after award

• Length of drapery panels shall be at least 4" below the window sill

• Drapery panels shall have a minimum of 200% fullness

• All fabric repeats shall be matched at seams and match panel to panel

• Multiple width draperies shall be pleated so that joining seams are hidden behind pleats. Half widths shall be placed on the return side of the drapery.

• All panels shall be tabled to assure square and even hems.

• Side hems shall be 1 ½” W double turned and blind stitched. Header shall have a minimum of 4”W double turned with washable buckram tape folded into fabric prior to stitching. Snap tape is sewn into top hem of panel. Bottom hems shall be 4” W double turned and blind stitched.

• Include 0.25 oz. corner square lead weight

• Drapery is unlined

• All materials shall be flame retardant and machine washable without losing flame resistant characteristics

• Curtains should be tagged with size of curtain and fire retardancey information

Jul-2016

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

FIELD VERIFY ALL LOCATIONS AND DIMENSIONS AFTER

AWARD

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

JSN A6305E DRAPERY PANELS, PAIR C208

Series Draperies

Dimensions Existing rod width: (2) rods approximately 60", installed end to end Length of drapery: approximately 48"

Curtain pattern is to run vertically

Locations See above

Quantity 1 PAIR

FURNITURE ILLUSTRATION SHEET/ORDER FORM

HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA:

• Ripplefold drapery panels on existing tracks; Field verify existing tracks after award

• Length of drapery panels shall be at least 4" below the window sill

• Drapery panels shall have a minimum of 200% fullness

• All fabric repeats shall be matched at seams and match panel to panel

• Multiple width draperies shall be pleated so that joining seams are hidden behind pleats. Half widths shall be placed on the return side of the drapery.

• All panels shall be tabled to assure square and even hems.

• Side hems shall be 1 ½” W double turned and blind stitched. Header shall have a minimum of 4”W double turned with washable buckram tape folded into fabric prior to stitching. Snap tape is sewn into top hem of panel. Bottom hems shall be 4” W double turned and blind stitched.

• Include 0.25 oz. corner square lead weight

• Drapery is unlined

• All materials shall be flame retardant and machine washable without losing flame resistant characteristics

• Curtains should be tagged with size of curtain and fire retardancey information

Jul-2016

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

FIELD VERIFY ALL LOCATIONS AND DIMENSIONS AFTER

AWARD

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

Landstuhl Regional Medical Center - NICU

Finish: Arc Com Melody-X Mist #1

JSN A6305F DRAPERY PANELS, PAIR C212

Series Draperies

Dimensions Existing rod width: approximately 84" Length of drapery: approximately 48"

Curtain pattern is to run vertically

Locations See above

Quantity 1 PAIR

FURNITURE ILLUSTRATION SHEET/ORDER FORM

HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA:

• Ripplefold drapery panels on existing tracks; Field verify existing tracks after award

• Length of drapery panels shall be at least 4" below the window sill

• Drapery panels shall have a minimum of 200% fullness

• All fabric repeats shall be matched at seams and match panel to panel

• Multiple width draperies shall be pleated so that joining seams are hidden behind pleats. Half widths shall be placed on the return side of the drapery.

• All panels shall be tabled to assure square and even hems.

• Side hems shall be 1 ½” W double turned and blind stitched. Header shall have a minimum of 4”W double turned with washable buckram tape folded into fabric prior to stitching. Snap tape is sewn into top hem of panel. Bottom hems shall be 4” W double turned and blind stitched.

• Include 0.25 oz. corner square lead weight

• Drapery is unlined

• All materials shall be flame retardant and machine washable without losing flame resistant characteristics

• Curtains should be tagged with size of curtain and fire retardancey information

Jul-2016

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

FIELD VERIFY ALL LOCATIONS AND DIMENSIONS AFTER

AWARD

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

JSN A6305G DRAPERY PANELS, PAIR C207, C208

Series Draperies

Dimensions Existing rod width: (2) rods, approximately 42", installed end to end Length of drapery: approximately 48"

Curtain pattern is to run vertically

Locations See above

Quantity 2 PAIRS

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

FURNITURE ILLUSTRATION SHEET/ORDER FORM

HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA:

• Ripplefold drapery panels on existing tracks; Field verify existing tracks after award

• Length of drapery panels shall be at least 4" below the window sill

• Drapery panels shall have a minimum of 200% fullness

• All fabric repeats shall be matched at seams and match panel to panel

• Multiple width draperies shall be pleated so that joining seams are hidden behind pleats. Half widths shall be placed on the return side of the drapery.

• All panels shall be tabled to assure square and even hems.

• Side hems shall be 1 ½” W double turned and blind stitched. Header shall have a minimum of 4”W double turned with washable buckram tape folded into fabric prior to stitching. Snap tape is sewn into top hem of panel. Bottom hems shall be 4” W double turned and blind stitched.

• Include 0.25 oz. corner square lead weight

• Drapery is unlined

• All materials shall be flame retardant and machine washable without losing flame resistant characteristics

• Curtains should be tagged with size of curtain and fire retardancey information

Jul-2016

Finish: Arc Com Melody-X Mist #1

FIELD VERIFY ALL LOCATIONS AND DIMENSIONS AFTER

AWARD

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

JSN A6305H SINGLE DRAPERY PANEL A202

Series Draperies

Dimensions Existing rod width: approximately 60" Length of drapery: approximately 82"

Curtain pattern is to run vertically

Locations See above

Quantity 1

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

FURNITURE ILLUSTRATION SHEET/ORDER FORM

HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA:

• Ripplefold drapery panels on existing tracks; Field verify existing tracks after award

• Length of drapery panels shall be at least 4" below the window sill

• Drapery panels shall have a minimum of 200% fullness

• All fabric repeats shall be matched at seams and match panel to panel

• Multiple width draperies shall be pleated so that joining seams are hidden behind pleats. Half widths shall be placed on the return side of the drapery.

• All panels shall be tabled to assure square and even hems.

• Side hems shall be 1 ½” W double turned and blind stitched. Header shall have a minimum of 4”W double turned with washable buckram tape folded into fabric prior to stitching. Snap tape is sewn into top hem of panel. Bottom hems shall be 4” W double turned and blind stitched.

• Include 0.25 oz. corner square lead weight

• Drapery is unlined

• All materials shall be flame retardant and machine washable without losing flame resistant characteristics

• Curtains should be tagged with size of curtain and fire retardancey information

Jul-2016

Finish: Arc Com Ebb-X "Sunshine" #7

FIELD VERIFY ALL LOCATIONS AND DIMENSIONS AFTER

AWARD

Landstuhl Regional Medical Center - Labor & Delivery

JSN A6305i SINGLE DRAPERY PANEL A202

Series Draperies

Dimensions Existing rod width: approximately 60" Length of drapery: approximately 48"

Curtain pattern is to run vertically

Locations See above

Quantity 1

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

FURNITURE ILLUSTRATION SHEET/ORDER FORM

HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA:

• Ripplefold drapery panels on existing tracks; Field verify existing tracks after award

• Length of drapery panels shall be at least 4" below the window sill

• Drapery panels shall have a minimum of 200% fullness

• All fabric repeats shall be matched at seams and match panel to panel

• Multiple width draperies shall be pleated so that joining seams are hidden behind pleats. Half widths shall be placed on the return side of the drapery.

• All panels shall be tabled to assure square and even hems.

• Side hems shall be 1 ½” W double turned and blind stitched. Header shall have a minimum of 4”W double turned with washable buckram tape folded into fabric prior to stitching. Snap tape is sewn into top hem of panel. Bottom hems shall be 4” W double turned and blind stitched.

• Include 0.25 oz. corner square lead weight

• Drapery is unlined

• All materials shall be flame retardant and machine washable without losing flame resistant characteristics

• Curtains should be tagged with size of curtain and fire retardancey information

Jul-2016

Finish: Arc Com Ebb-X "Sunshine" #7

FIELD VERIFY ALL LOCATIONS AND DIMENSIONS AFTER

AWARD

JSN A6305J SINGLE DRAPERY PANEL A203, B203, B204, B206

Series Draperies

Dimensions Existing rod width: approximately 66" Length of drapery: approximately 82"

Curtain pattern is to run vertically

Locations See above

Quantity 7

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

FURNITURE ILLUSTRATION SHEET/ORDER FORM

HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA:

• Ripplefold drapery panels on existing tracks; Field verify existing tracks after award

• Length of drapery panels shall be at least 4" below the window sill

• Drapery panels shall have a minimum of 200% fullness

• All fabric repeats shall be matched at seams and match panel to panel

• Multiple width draperies shall be pleated so that joining seams are hidden behind pleats. Half widths shall be placed on the return side of the drapery.

• All panels shall be tabled to assure square and even hems.

• Side hems shall be 1 ½” W double turned and blind stitched. Header shall have a minimum of 4”W double turned with washable buckram tape folded into fabric prior to stitching. Snap tape is sewn into top hem of panel. Bottom hems shall be 4” W double turned and blind stitched.

• Include 0.25 oz. corner square lead weight

• Drapery is unlined

• All materials shall be flame retardant and machine washable without losing flame resistant characteristics

• Curtains should be tagged with size of curtain and fire retardancey information

Jul-2016

Finish: Arc Com Ebb-X "Sunshine" #7

FIELD VERIFY ALL LOCATIONS AND DIMENSIONS AFTER

AWARD

JSN A6305K SINGLE DRAPERY PANEL A203, B203, B204, B206

Series Draperies

Dimensions Existing rod width: approximately 66" Length of drapery: approximately 48"

Curtain pattern is to run vertically

Locations See above

Quantity 7

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

FURNITURE ILLUSTRATION SHEET/ORDER FORM

HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA:

• Ripplefold drapery panels on existing tracks; Field verify existing tracks after award

• Length of drapery panels shall be at least 4" below the window sill

• Drapery panels shall have a minimum of 200% fullness

• All fabric repeats shall be matched at seams and match panel to panel

• Multiple width draperies shall be pleated so that joining seams are hidden behind pleats. Half widths shall be placed on the return side of the drapery.

• All panels shall be tabled to assure square and even hems.

• Side hems shall be 1 ½” W double turned and blind stitched. Header shall have a minimum of 4”W double turned with washable buckram tape folded into fabric prior to stitching. Snap tape is sewn into top hem of panel. Bottom hems shall be 4” W double turned and blind stitched.

• Include 0.25 oz. corner square lead weight

• Drapery is unlined

• All materials shall be flame retardant and machine washable without losing flame resistant characteristics

• Curtains should be tagged with size of curtain and fire retardancey information

Jul-2016

Finish: Arc Com Ebb-X "Sunshine" #7

FIELD VERIFY ALL LOCATIONS AND DIMENSIONS AFTER

AWARD

JSN A6305L SINGLE DRAPERY PANEL

7B105, 7B105A, 7B107, 7B108, 7B109(2), 7B110(2), 7B111, 7B112, 7B113(2), 7B114(2), 7B116, 7B117(2), 7B118(2), 7B119(2), 7B120, 7B121(2), 7B122(3), 7B127(2), 7B129, 7B130, 7B135(2), 7B125

Manufacturer Franklin Fabrics

Series Draperies

Dimensions Existing rod width: approximately 44" Length of drapery: approximately 82"

Curtain pattern is to run vertically

Locations See above

Quantity 35

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

FURNITURE ILLUSTRATION SHEET/ORDER FORM

HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA:

• Ripplefold drapery panels on existing tracks; Field verify existing tracks after award

• Length of drapery panels shall be at least 4" below the window sill

• Drapery panels shall have a minimum of 200% fullness

• All fabric repeats shall be matched at seams and match panel to panel

• Multiple width draperies shall be pleated so that joining seams are hidden behind pleats. Half widths shall be placed on the return side of the drapery.

• All panels shall be tabled to assure square and even hems.

• Side hems shall be 1 ½” W double turned and blind stitched. Header shall have a minimum of 4”W double turned with washable buckram tape folded into fabric prior to stitching. Snap tape is sewn into top hem of panel. Bottom hems shall be 4” W double turned and blind stitched.

• Include 0.25 oz. corner square lead weight

• Drapery is unlined

• All materials shall be flame retardant and machine washable without losing flame resistant characteristics

• Curtains should be tagged with size of curtain and fire retardancey information

Jul-2016

Finish: Arc Com Melody-X Mist #1

FIELD VERIFY ALL LOCATIONS AND DIMENSIONS AFTER

AWARD

Landstuhl Regional Medical Center - OB-GYN

JSN A6305M SINGLE DRAPERY PANEL 7F103(2), 7F104(2), 7F105(2), 7F106(2),

7F107(2), 7F108(2), 7F109(2), 7F110(2)

Manufacturer Franklin Fabrics

Series Draperies

Dimensions Existing rod width: approximately 84" Length of drapery: approximately 82"

Curtain pattern is to run vertically

Locations See above

Quantity 16

FURNITURE ILLUSTRATION SHEET/ORDER FORM

HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA:

• Ripplefold drapery panels on existing tracks; Field verify existing tracks after award

• Length of drapery panels shall be at least 4" below the window sill

• Drapery panels shall have a minimum of 200% fullness

• All fabric repeats shall be matched at seams and match panel to panel

• Multiple width draperies shall be pleated so that joining seams are hidden behind pleats. Half widths shall be placed on the return side of the drapery.

• All panels shall be tabled to assure square and even hems.

• Side hems shall be 1 ½” W double turned and blind stitched. Header shall have a minimum of 4”W double turned with washable buckram tape folded into fabric prior to stitching. Snap tape is sewn into top hem of panel. Bottom hems shall be 4” W double turned and blind stitched.

• Include 0.25 oz. corner square lead weight

• Drapery is unlined

• All materials shall be flame retardant and machine washable without losing flame resistant characteristics

• Curtains should be tagged with size of curtain and fire retardancey information

Jul-2016

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

FIELD VERIFY ALL LOCATIONS AND DIMENSIONS AFTER

AWARD

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

Landstuhl Regional Medical Center - OB-GYN

U0001A DECORATIVE RESIN PANELS 7D215, 7D213, 7D206A, 7D218(2), 7D220(2), 7D221,

7D222(2), 7D223(2), 7D225, 7D227

Manufacturer 3-Form

Series Varia Ecoresin/Textures/Linear(single-sided)/Wave

Dimensions 20" X 20"

Quantity 14

Jul-2016

FURNITURE ILLUSTRATION SHEET/ORDER FORM

PRODUCT DESCRIPTION/SALIENT FEATURES:

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

Finish: Bliss X 2 + Pewter to match Benjamin Moore Soft Jazz

Locations See above

• 9mm gauge (3/8" thick) panels

• Panel size to be approximately 20" x 20"

• Stand off brackets to be brushed nickel (4 each)

• Panels shall have radius edges, 1/8" minimum

• Textured finish to be "wave" or equal

Note: Verify all dimensions and locations of U0001a panels in the Mother Baby Unit

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

• Panels are Class A fire rating

U0001B DECORATIVE RESIN PANELS C200 Corridor

Manufacturer 3-Form

Series Varia Ecoresin/Textures/Linear(single-sided)/Ridge

Dimensions See above (with quantities)

Quantity 1

FURNITURE ILLUSTRATION SHEET/ORDER FORM

PRODUCT DESCRIPTION/SALIENT FEATURES:

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

Finish: Bliss x 2 + Pewter to match Benjamin Moore Soft Jazz

• 9mm gauge (3/8" thick) panels

• Multiple panels pieced together using tongue and grove flat seaming, see pattern image to right

• Stand off brackets to be brushed nickel, quantity as required per panel size

• Panels shall have radius edges, 1/8" minimum

• Textured finish to be "ridge" or equal

• Panels are Class A fire rating

• Provide panels in the following sizes:

• (4)105cm L x 90cm H panel

• (1) 210cm L x 90cm H panel comprised of (2) 105cm L x 90cm H panels

• (1) 62.5cm L x 90cm H panel

• (1) 330cm L x 90cm H panel comprised of (3) 110cm L x 90 cm H panels

Note: Verify all dimensions and locations of U0001B panels in the NICU

Jul-2016

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

Locations Refer to plans

U0001B DECORATIVE RESIN PANELS 7E 104

Manufacturer 3-Form

Series Varia Ecoresin/Textures/Linear(single-sided)/Ridge

Dimensions Varies

Quantity 20

Landstuhl Regional Medical Center - OB/GYN Jul-2016

FURNITURE ILLUSTRATION SHEET/ORDER FORM

PRODUCT DESCRIPTION/SALIENT FEATURES:

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

Finish: TBD after award, provide physical samples as part of work plan in the blue family as shown on this page

Locations Refer to plans

• 9mm gauge (3/8" thick) panels

• Panel size to be approximately 100cm x 100cm

• Stand off brackets to be brushed nickel (4 each)

• Panels shall have radius edges, 1/8" minimum

• Textured finish to be "ridge" or equal

• Multiple panels pieced together using tongue and grove flat seaming, see pattern image to right

• Panels are Class A fire rating

Note: Verify all dimensions and locations of U0001b panels in OB-GYN

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

100cm

100c

A0EDCLMP

Text Box U0001B-2

U0002A "HEALING" ILLUMINATED CEILING ART

A203(4), B203(4), B204(4), B217(2), B222, B223, B227(4), 7D206A, 7D213, 7D215, 7D218, 7D220, 7D221, 7D222(3), 7D223, 7D225(2), 7D227, 7B120, 7B118, 7B114, 7B112, 7B108, 7B109, 7B113, 7B117, 7B119, 7B127, 7B129, 7B131, 7B130, 7B126, 7B102B, 7E108 (4), 7F103, 7F104

Manufacturer Various

Series Light Lens

Dimensions 62,5cm x 62,5cm --- METRIC

Quantity 54

FIELD VERIFY ALL LOCATIONS AND DIMENSIONS AFTER

AWARD

Jul-2016

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

Landstuhl Regional Medical Center - Labor & Delivery, Mother Baby Unit, & OB-GYN

Locations See Above

FURNITURE ILLUSTRATION SHEET/ORDER FORM

PRODUCT DESCRIPTION/SALIENT FEATURES:

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

Images TBD after award

• Images are printed on translucent film with UV resistant inks

• Printed images are laminated to impact resistant acrylic or polycarbonate sheets with co-extruded UV-resistant surface treatment on one side

• Finished lens shall be fade resistant with a non-glare finish

• Finished lens shall be cleanable

• Finished lens shall be sized to fit within the existing suspended ceiling grid

U0002B "HEALING" ILLUMINATED CEILING ART C208

Manufacturer Various

Series Light Lens

Dimensions 60cm x 125cm --- METRIC

Quantity 10

FURNITURE ILLUSTRATION SHEET/ORDER FORM

PRODUCT DESCRIPTION/SALIENT FEATURES:

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

Images TBD after award

• Images are printed on translucent film with UV resistant inks

• Printed images are laminated to impact resistant acrylic or polycarbonate sheets with co-extruded UV-resistant surface t t t id• Finished lens shall be fade resistant with a non-glare finish

• Finished lens shall be cleanable

• Finished lens shall be sized to fit within the existing suspended

FIELD VERIFY ALL LOCATIONS AND DIMENSIONS AFTER

AWARD

Jul-2016

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

Landstuhl Regional Medical Center - NICU

Locations See Above http://www.artificialsky.com/uploads/LL_Specs.pdf

U0001C ART ON ACRYLIC B227

Manufacturer Great American Art

Series Art on Acrylic

Dimensions 42"W x 36"H

Optional images for U0001C

Quantity 2

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

Landstuhl Regional Medical Center - Labor & Delivery

Jul-2016

FURNITURE ILLUSTRATION SHEET/ORDER FORM

PRODUCT DESCRIPTION/SALIENT FEATURES:

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

Images TBD, after award

Locations Refer to plans

• Image applied to back surface of 1/4 thick clear PETG, no border

• Panel Size to be 42"W x 36"H

• 1" Stainless steel brushed satin stand off brackets

• Edges of acrylic panel to be rounded (1/8") - no sharp edges

• Finish of panel is to be matte

• Image TBD after award

U0099 Frames and Mats C200, Scrub Corridor

Manufacturer Various

Series Various

Dimensions See above for dimensions

Quantity 1

VERIFY ALL DIMENSIONS AND QUANTITIES

Jul-2016

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

Landstuhl Regional Medical Center - NICU

Locations See Above

FURNITURE ILLUSTRATION SHEET/ORDER FORM

PRODUCT DESCRIPTION/SALIENT FEATURES:

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

Finish: Frame - black finish (Height 0.75"; Width 1.25") Mat: Cresent Very White

• Hardwood frames, Larson Juhl Ansley 533526 or equal

• Single beveled mat, Cresent Very White or equal

• UV filtering hard coat acrylic sheeting in lieu of glass

• 4-point security mounting hardware

• Removable backs - user will provide images

• Frame sizes:

• (12) 10" x 12" frames with (2) openings for 4" x 6" images

• (6) 16" x 16" frames with (2) openings for 4" x 6" images and

(3) openings for 2" x 2" images

• (3) 16" x 20" frames with (3) openings for 4" x 6" images

• (6) 12" x 30" frames with (5) openings for 4" x 6" images

• Mat opening sizes shall be slightly smaller than image sizes identified above

12x 6x 3x 6x

A6046 ARTWORK, FRAMED AND MATTED

C200 CORRIDOR, A203, B203, B204, B223, B227,

B217, A211, A210A, CORRIDOR 7D200, 7D206A,

7D213, 7D215, 7D218, 7D220, 7D221, 7D222, 7D223, 7D225, 7D227

Manufacturer Various

Series Various

Dimensions See above for dimensions

Quantity 46

FURNITURE ILLUSTRATION SHEET/ORDER FORM

PRODUCT DESCRIPTION/SALIENT FEATURES:

"Designer shall be notified if alternate products are selected to ensure function and compatibility with related items

Finish: Frame: Light woodtone (Height 7/8"; Width 2-1/8") Mat: Cresent Very White

• Hardwood frame, Larson Juhl Cranbrook 603677 or equal

• Double beveled mat, Cresent Very White or equal

• UV filtering hard coat acrylic sheeting in lieu of glass

• 4-point security mounting hardware

• Images mounted to foam board, Foam-Core brand or equal

• Craft paper backing, ULINE Color Kraft or equal

• Overall frame size to be approximately 43" x 35"

• Image size to be approximately 32" x 24". Both portrait and landscape image orientations shall be provided

*ACTUAL IMAGES TBD AFTER AWARD*

Jul-2016

US ARMY MEDICAL COMMAND IMF PRODUCT SUBMITTAL

Landstuhl Regional Medical Center - Labor & Delivery and Mother Baby Unit

Locations See Above

Sample Images