W912DW23Q0022R0001- CJD Misc Piping Components (Final).pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The due date for the receipt of quotes is not extended and it is 2:00 PM Pacif ic Time on 16 May 2023.

The purpose of this amendment (R0001) is to update the Purchase Description in its entirety. Please see the follow ing changes in red. All other terms and conditions remain the same.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 7

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 05-May-2023

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W912DW23Q0022

X 9B. DATED (SEE ITEM 11)

28-Apr-2023

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

05-May-2023

CODE

USA ENGINEER DISTRICT, SEATTLE

ATTN: CENWS-CT

4735 EAST MARGINAL WAY SOUTH, BLDG. 1202

SEATTLE WA 98134-2388

W912DW 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912DW23Q0022

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from:

4” SS Flat Faced Socket Weld Flanges, class 150, with Bolt and Gasket Kits. CJD requires miscellaneous piping components, and those components shall meet the minimum criteria identified as well as the specification requirements of Section 2.0 in the purchase description section.

To:

4” SS Flat Faced Socket Weld Flanges, class 150, with Bolt and Gasket Kits. CJD requires miscellaneous piping components, and those components shall meet the minimum criteria identified as well as the specification requirements of Section 2.0 in the purchase description section.Gaskets shall be 1/16th inch compressed aramid fiber that are suitable for oil service.

CLIN 0002

The CLIN extended description has changed from:

2” SS Flat Faced Socket Weld Flanges, class 150, with Bolt and Gasket Kits. CJD requires miscellaneous piping components, and those components shall meet the minimum criteria identified as well as the specification requirements of Section 2.0 in the purchase description section.

To:

2” SS Flat Faced Socket Weld Flanges, class 150, with Bolt and Gasket Kits. CJD requires miscellaneous piping components, and those components shall meet the minimum criteria identified as well as the specification requirements of Section 2.0 in the purchase description section.Gaskets shall be 1/16th inch compressed aramid fiber that are suitable for oil service.

The following have been modified:

PURCHASE DESCRIPTION

Purchase Description for Miscellaneous Pipping Components

Chief Joseph Dam

1.0 GENERAL INFORMATION: The U.S. Army Corps of Engineers requires miscellaneous piping components to be purchased and delivered to Chief Joseph Dam located near Bridgeport, Washington.

2.0 MATERIAL SPECIFICATIONS: The following specifications are pertinent to the components being supplied

2.1 Flanges:

Flanges and flanged fittings must be ASTM A351/A351M Grade CF3 or CF3M, Class 150, drilled to ASME B16.5 with a flat face.

2.2 Fittings: (ASTM A403)

All fittings, elbows, and tees must be socket welding type and must conform to ASME B16.11 and ASTM A182 for either a 304L or 316L grade material.

2.3 Gaskets:

Gaskets must conform to ASME B16.5, Annex E, Group 1a or equivalent. Dielectric gaskets kits must contain method of isolating hardware as well as a dielectric rated gasket.

2.4 Valves:

Valves must include operator, actuator, wrench, and all other accessories required for a complete operation. The valves must be suitable for the intended service. All valves must be full port flanged and must conform to ASME B16.10, B16.34 and ASTM A351 Grade CF3 or CF3M.

2.5 Hardware:

All hardware should be appropriate quantity, length, and grade to satisfy the requirements of ASME B16.5, B18.2.2, B1.1

2.6 Alternatives to the materials listed may be considered if they are of equal of greater quality. Government approval is required for alternatives being proposed. There is no guarantee that the government will accept a proposed alternative. All welded materials must be a low carbon austenitic steel, similar to grades 304L/316L.

3.0 ORDER SCHEDULE:

3.1 Contractor shall supply components identified below. Components shall meet the minimum criteria identified as well as the specification requirements of Section 2.0 of this document.

3.1.1 102 Ea 4” SS Flat Faced Socket Weld Flanges, class 150, with Bolt and Gasket Kits. Gaskets shall be 1/16th inch compressed aramid fiber that are suitable for oil service

3.1.2 220 Ea 2” SS Flat Faced Socket Weld Flanges, class 150, with Bolt and Gasket Kits. Gaskets shall be 1/16th inch compressed aramid fiber that are suitable for oil service

3.1.3 4 Ea 4” Flanged Ball Valve SS, Class 150

3.1.4 4 Ea 2” Flanged Ball Valve SS, Class 150

3.1.5 32 Ea Dielectric-Isolation Kits For 2” flanges

3.1.6 12 Ea 3” Socket Weld 45 Degree Elbow

3.1.7 17 Ea 1.5” SS flanges, NPT, class 300

3.1.8 17 Ea 1.5” SS Compression fitting x MNPT Elbow (see figure 1 for example)

3.1.9 17 Ea 1.5” SS Compression fitting 90° Elbow (see figure 2 for example)

3.1.10 17 Ea ¾ inch SS Compression x Pipe Weld Elbow (See figure 3 for example)

3.1.11 17 Ea 1.5” SS Compression x MNPT connector (See figure 4 for example)

3.2 Prior to procuring the identified material, the contractor shall provide data sheets for each product. Data sheets shall demonstrate that the products meet the requirements of Section 2.0 and 3.0.

4.0 WARRANTY: All components shall be covered by a minimum of 2-year manufacturer’s warranty.

5.0 ACCEPTANCE OF MATERIALS: Materials will be inspected at the delivery point prior to acceptance. New equipment only; no remanufactured or “gray market” items. Proper protection and care of material before acceptance is the Contractor's responsibility. Any material found to be damaged must be replaced at the Contractor's expense. Handling must be in accordance with ASTM F402. Storage facilities must be classified and marked in accordance with NFPA 704. Materials must be stored with protection from puncture, dirt, grease, moisture, mechanical abrasions, excessive heat, ultraviolet (UV) radiation damage, or other damage. Pipping components must be handled and stored in accordance with the manufacturer's recommendation.

6.0 DELIVERY SCHEDULE:

Delivery must be received at the delivery location no later than 45 days after contract award.

The Contractor shall contact the Dam Project staff ten (10) days prior to any pending deliveries.

All deliveries must take place during the Dam’s business hours of Monday through Thursday 7:30am - 4:00pm, except on observed federal holiday.

7.0 DELIVERY LOCATION:

Item shall be delivered FOB DESTINATION to the following address:

CHIEF JOSEPH DAM PROJECT OFFICE WAREHOUSE

HIGHWAY 17 AND PEARL HILL ROAD

BRIDGEPORT WA 98813-1120

8.0 FIGURES:

Figure 2: Example of 1.5" tube to MNPT Elbow, Item 3.1.8

Figure 1: Example of 1.5" Tube Compression Elbow, Item 3.1.9

Figure 4: Example of ¾ inch SS Compression x Pipe Weld Elbow, Item 3.2.10

Figure 3: Example of 1.5” SS Compression x MNPT connector, Item 3.2.11

(End of Summary of Changes)