W912DW21Q0061 CJD High Lift Pump Upgrade.pdf

SEE ADDENDUM

(No Collect Calls)

W912DW21Q0061 30-Jun-2021

b. TELEPHONE NUMBER

206-764-6659

8. OFFER DUE DATE/LOCAL TIME

10:00 AM 15 Jul 2021

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912DW9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

GERALDINE L KEMP

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

USA ENGINEER DISTRICT, SEATTLE

ATTN: CENWS-CT

4735 EAST MARGINAL WAY SOUTH, BLDG. 1202

SEATTLE WA 98134-2388

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

206-764-6817FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

1,250

NAICS:

333996

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF62

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912DW21Q0061

Section SF 1449 - CONTINUATION SHEET

INSTRUCTIONS TO VENDORS

1. REPRESENTATIONS AND CERTIFICATIONS CONTAINED HEREIN MUST BE COMPLETED BY

VENDORS AND RETURNED WITH QUOTES:

IF YOUR REPRESENTATIONS AND CERTIFICATIONS ARE REGISTERED IN THE “SYSTEM

FOR AWARD MANAGEMENT” (SAM) CHECK HERE . IF NOT, YOU CAN

REGISTER ONLINE AT www.sam.gov

2. Marking of Email Quotation Submittal:

Email Quotation submission shall be plainly marked as follows:

Quote for: High Lift Pump Upgrade, Chief Joseph Dam, Bridgeport, WA

Request for Quote No.: W912DW21Q0061

Closing Date and Time: 15 July, 10:00 A.M. Pacific Time

AMENDMENTS NUMBERED________HAVE BEEN RECEIVED

3. Email quotations only. Faxed quotes will NOT be accepted. Email quotes shall be accepted before closing at e-mail address Geraldine.L.Kemp@usace.army.mil.

4. The contractor receiving an award is required to be registered in the SAM (System for Awards

Management)

5. PROSPECTIVE CONTRACTORS: Contractors are required to be registered in the System for Awards

Management (SAM) for awards resulting from solicitations.

This rule more efficiently implements the Debt Collection Improvement Act of 1996, as it requires contractors to be registered in SAM for consideration of future solicitations, awards, and payment.

Registration is required prior to award of any contract, basic agreement, basic ordering agreement, or blanket purchase agreement from a solicitation.

THIS PROCUREMENT ACTION IS 100% SET-ASIDE FOR SMALL BUSINESSES. THE FIRM

WHO IS SELECTED FOR AWARD MUST BE REGISTERED IN SAM.

LACK OF REGISTRATION IN THE SAM DATABASE WILL MAKE A QUOTE INELIGIBLE

FOR AWARD.

The web site may be accessed at www.sam.gov

6. Award shall be made to the responsive and responsible vendor with the lowest priced quote.

7. Required Submittals:

a) Instruction Page (2 pages)

Paragraph 1 – Indicate if you are registered in SAM (System for Award Management) Paragraph 2 – Must acknowledge any/all amendments to the solicitation.

Paragraph 8 – Must fill in all company information requested

b) Fill in all pricing information.

c) FAR Provision 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS— Commercial Items --Alternate 1(FEB 2021)

All of these must be filled in and returned in order to be eligible for evaluation.

DO NOT return the rest of the solicitation form.

8. The contractor is required to provide the following information with your quote:

Federal Taxpayer’s ID Number:

DUNS Number:

Cage Code Number

This requires registration in SAM, web site for registration is www.sam.gov

Remit to Address:

Company Name:

Address:

City/State/Zip:

Phone & Fax Numbers:

Point of Contact:

E-Mail Address:

9. All quoted items must meet the requirements of the Request for Quote (RFQ) including specifications stated in all attachments.

10. The contractor should list any special features or warranty information applicable to the quoted product(s) or service(s).

PRICING SCHEDULE

CJD HIGH LIFT PUMP ASSEMBLY UPGRADE

ITEMS REQUIRED AS DESCRIBED IN THE ATTACHED PURCHASE DESCRIPTION SCOPE OF WORK

ENTITLED, “UNIT 17 THROUGH UNIT 27 HIGH LIFT PUMP ASSEMBLY.”

Item No. Description of Supplies/Services Qty Unit Unit Price Total

0001 Skid Mounted Hydraulic Power Units to include As-builts, Warranty, Operations Manuals as defined in the attached Puchase Description Scope of Work

12 EA

0002 1" Seamless 316 Stainless Steel Tubing 33 FT

0003 1/4" Seamless 316 Stainless Steel Tubing 77 FT

0004 1/2" Seamless 316 Stainless Steel Tubing 110 FT

0005 1/2" Union 13 EA

0006 1" Ball Valve 12 EA

0007 1/2" Proportional Relief Valve 13 EA

0008 Digital Pressure Gauge/Switch 12 EA

0009 Dial Pressure Gauge 12 EA

0010 1/4" Screwed Bonnet Needle Valve 12 EA

0011 1/4" Union Tee 13 EA

0012 Straight Reducing Union: 1/4" X 1/4" Female NPT 24 EA

0013 1/4" Elbow 57 EA

0014 Pressure Gauge Snubber 24 EA

0015 1" SAE MS Male Connector 13 EA

0016 1/2" SAE MS Male Connector 13 EA

0017 3/8" Thick Steel Plate 12 EA

0018 1/2" Loop Clamp 25 EA

0019 1" Elbow 24 EA

0020 1/2" Elbow 35 EA

0021 1/2" Straight Union FNPT x Compression Fitting 13 EA

0022 1/2" Straight Union MNPT x Compression Fitting 13 EA

0023 1/2" Bulkhead Union Jam Nut 35 EA

0024 1/2" Union Tee 12 EA

0025 ¼” Vibration Damping Loop Clamp 40 EA

0026 Pan Head Screw 50 EA

0027 1-1/8” Square Bar Stock 6 EA

0028 Hex Head Screw 100 EA

0029 Phillips Flat Head Screw 60 EA

0030 Phillips Flat Head Screw 100 EA

0031 Washer 75 EA

0032 1/2" Check Valve 13 EA

TOTAL PRICE

Unit 17 thru Unit 27 High Lift Pump Assembly

Chief Joseph Dam Hydro-Power Project, Bridgeport, WA 98813-1120

1. INTENT/OBJECTIVE: The Contractor shall provide all materials, tools, equipment, and labor necessary to deliver twelve (12) skid mounted hydraulic power units and associated materials for the High Lift Pump system on Main Units 17-27 at Chief Joseph Dam in Bridgeport, WA. The High Lift Pump system provides high pressure oil to the thrust bearing surfaces of a generator during startup and shutdown.

2. SCOPE OF WORK: Contractor shall deliver the hydraulic power units and miscellaneous materials in sizes and quantities specified in paragraph 3.0 and 4.0. Contractor shall be responsible for supplying equipment that will withstand the intended use of life. All furnished equipment shall be new and not refurbished, conform in strength, quality of material, workmanship, and sound engineering standards.

3. SKID MOUNTED HYDRAULIC POWER UNITS: The Contractor shall deliver a quantity of twelve (12) each skid mounted hydraulic power units with equipment and components listed below that are “brand name or equivalent”. The hydraulic power units shall be assembled as specified in Attachment A. The Government has designed the hydraulic system to provide adequate lubrication to the thrust bearing. From this, the Contractor must receive approval of the intended components and selected equipment before assembly begins. All tubing lengths and fittings shall be determined by the contractor once the main components have been approved by the Government. Each component has the following salient characteristics:

3.1. General Assembly

3.1.1. Maximum overall dimension: L x W x H = 44” x 12” x 25”

3.1.2. Filter housings mounted for easy removal of filter element.

3.1.3. Components to be assembled in accordance with the system one line diagram in Attachment A.

3.1.4. The motor, filters, piping, and valves shall be adequately affixed to the base.

3.1.5. All tubing to be as specified in Attachment A.

3.1.6. Where allowed, all fittings must be a double ferrule compression style connection for tubing.

3.2. Electric Motor: Brand Name or Equivalent to Teco-Westinghouse EP7/54C

3.2.1. 3-phase induction type rated for 230/460 VAC.

3.2.2. Rated at 7.5 Hp and 1800 rpm.

3.2.3. Rated for continuous duty with a minimum service factor of 1.15.

3.2.4. Designed for 40℃ minimum operating temperature.

3.2.5. Totally enclosed fan-cooled type enclosure.

3.2.6. Class F insulation.

3.2.7. Conduit box mounted on left hand side of motor when looking from coupling end.

3.2.8. Motor rotation counterclockwise when viewed from coupling end.

3.3. Motor Coupling/Adapter

3.3.1. Properly sized for the shaft lengths of the approved electric motor and rotary gear pump.

3.3.2. Properly sized for the flange configurations of the approved electric motor and rotary gear pump.

3.4. Rotary Gear Pump: Brand Name or Equivalent to Casappa Polaris PLP 20*14

3.4.1. Displacement of 0.89 〖in〗^3/rev.

3.4.2. Minimum flow rate of 5.0 gpm at 1750 rpm and 1,200 psig.

3.4.3. Clockwise rotation when viewed from drive shaft end.

3.4.4. Designed for hydraulic fluid with a viscosity of 330 SSU.

3.4.5. All gasket material and shaft seals constructed of fluorocarbon material (FKM).

3.5. Discharge Line Filter: Brand Name or Equivalent to Parker World Pressure Filter

3.5.1. Filter media rated for 5 micron (min) – 15 micron (max).

3.5.2. Internal bypass option

3.5.3. Filter housing and element rated for 3,000 psig minimum.

3.5.4. Fluorocarbon (FKM) gasket and seal material.

3.5.5. Maximum pressure drop of 5 psig at 5 gpm.

3.5.6. Filter element must be easily interchanged in mounted position on skid.

3.6. Suction Line Filter: Brand Name or Equivalent to Parker Moduflow CF2 Series

3.6.1. Filter media rated for 74 micron (min) – 400 micron (max).

3.6.2. Internal bypass option

3.6.3. Visual filter life indicator

3.6.4. Filter housing and element rated for 1,200 psig minimum.

3.6.5. Maximum pressure drop of 5 psig at 5 gpm.

3.6.6. Fluorocarbon gasket and seal material.

3.6.7. Filter element must be easily interchanged in mounted position on skid.

3.7. 1” Union: Brand Name or Equivalent to Swagelok Straight Union

3.7.1. 316 Stainless steel

3.7.2. 1-inch nominal double ferrule compression tube connection on both ends.

3.8. 1/2” Union: Brand Name or Equivalent to Swagelok Straight Union

3.8.1. 1/2-inch nominal double ferrule compression tube connection on both ends.

3.8.2. 316 Stainless steel

3.9. 1” x 1” x ½” Union Tee: Brand Name or Equivalent to Swagelok Reducing Union Tee

3.9.1. Nominal connection size shall be: 1-inch x 1-inch x ½-inch

3.9.2. Compression tube connection on all three end connections

3.9.3. 316 Stainless Steel

3.9.4. This component may be omitted if not required by the approved suction filter (Attachment A, Note

6).

3.10. 0.5” x 0.5” x 0.25” Union Tee: Brand Name or Equivalent to Swagelok Reducing Union Tee

3.10.1. Nominal connection size shall be: 0.5-inch x 0.5-inch x 0.25-inch

3.10.2. Compression tube connection on all three end connections

3.10.3. 316 Stainless Steel

3.11. Base

3.11.1. Maximum dimension: L x W x H = 44 inches x 12 inches x 1 inch (lip of drip pan)

3.11.2. The hydraulic system shall be mounted on a lipped drip pan, capable of retaining at least two liters of oil before overflowing.

3.11.3. No oil should be able to travel to the underside of the pan through bolt holes, seams, or cracks.

3.11.4. Material selection and thickness shall be of sufficient strength for the selected components.

3.11.5. Break all corners and sharp edges.

3.12. Paint

3.12.1. Surface Preparation

3.12.1.1. Clean metal base per SSPC/NACE Standard recommended by manufacturer of primer coat.

3.12.2. Primer Coat: US Coatings – MultiGrip 7000 Alkyd Primer Coating

3.12.2.1. Primer designed for structural steel, tank exteriors, piping, and equipment

3.12.2.2. Primer designed as a base coat for Alkyd finishes.

3.12.2.3. Temperature resistance of 200℉ minimum.

3.12.2.4. One coat applied @ 3-5 mils wet film thickness

3.12.3. Finish Coat: US Coatings MultiGrip 7200 Alkyd Finish Coating.

3.12.3.1. Color: Gunmetal Grey

3.12.3.2. Temperature resistance of 200℉ minimum.

3.12.3.3. Alkyd coating

3.12.3.4. Two coats applied @ 4-5mils wet film thickness.

4. MISCELLANEOUS MATERIAL/HARDWARE: The Contractor shall supply the below items in the sizes and quantities specified to satisfy the requirements of this contract to the delivery location under 8.0. The material/hardware is for Government personnel to install and connect the hydraulic power unit to the existing thrust bearing lubrication system. New equipment only; No remanufactured or “gray market” items. All material/hardware shall meet the following minimum specifications/capabilities listed:

4.1. 1" Seamless 316 Stainless Steel Tubing; Quantity of Thirty-Three (33) Feet with the following minimum specifications:

a. 1" OD

b. 0.049" Wall Thickness

c. Seamless

d. Bright Annealed Finish

e. Standard A269 Compliant

f. Rated for 1,200 PSIG minimum

4.2. 1/4" Seamless 316 Stainless Steel Tubing; Quantity of Seventy-Seven (77) Feet with the following minimum specifications:

a. 1/4" OD

b. 0.028" Wall Thickness

c. Seamless

d. Bright Annealed Finish

e. Standard A269 compliant

f. Rated for 3,000 psig minimum

4.3. 1/2" Seamless 316 Stainless Steel Tubing; Quantity of One Hundred and Ten (110) Feet with the following minimum specifications:

a. 1/2" OD

b. 0.049" Wall Thickness

c. Seamless

d. Bright Annealed Finish

e. Standard A269 compliant

f. Rated for 3,000 PSIG minimum

4.4. 1/2" Union; Quantity of Thirteen (13) Each Brand Name or Equivalent to Swagelok part number SS-810-6 with the following minimum specifications:

a. 316 Stainless Steel Body

b. 1/2" Nominal Double Ferrule Compression Style Tube Connections

4.5. 1" Ball Valve; Quantity of Twelve (12) Each Brand Name or Equivalent to Swagelok part number SS-

65TS16-JL with the following minimum specifications:

a. 316 Stainless Steel

b. 2-Way Ball Valve

c. 1" Nominal Double Ferrule Compression Style Tube Connections

d. Locking Lever Handle

e. Fluorocarbon (FKM) Flange Seal Material

f. Reinforced PTFE Seats

g. Rated for 2,200 PSIG minimum.

4.6. 1/2" Proportional Relief Valve; Quantity of Thirteen (13) Each Brand Name or Equivalent to McMaster part number 5027K11 with the following minimum specifications:

b. 2,000PSIG Cracking Pressure

c. Max Flow Rate of 6 gallons per minute (min)

d. Max. Working Pressure: 2,200 PSIG minimum

e. 90 degree Elbow Configuration

f. One (1) 1/2" MNPT Connection and one (1) FNPT Connection,

4.7. Digital Pressure Gauge/Switch; Quantity of Twelve (12) Each Brand Name or Equivalent to Ashcroft part number 45-2274-SD-02L-3000#-XU2 with the following minimum specifications:

a. 1/4" MNPT Process Connection @ 6 O’clock position

b. 4.5" Case

c. 0-3000 PSIG Range

d. Two SPDT Dry Contact Switches

e. 24VDC Line Powered

f. 4-20mA Output

g. Accuracy: ±0.25% of Span.

4.8. Dial Pressure Gauge; Quantity of Twelve (12) Each Brand Name or Equivalent to Ashcroft part number

45-1379-SS-02L-XXL-3000# with the following minimum specifications:

a. 1/4" MNPT Process Connection @ 6 O’clock position

b. 4.5" Case

c. 0-3000 PSIG range

d. Accuracy: ±0.5% of Span,

4.9. 1/4" Screwed Bonnet Needle Valve; Quantity of Twelve (12) Each Brand Name or Equivalent to

Swagelok part number SS-4JB with the following minimum specifications:

b. 1/4" Nominal Compression Style Tube Connections

c. 3,000 PSIG Rating.

4.10. 1/4" Union Tee; Quantity of Thirteen (13) Each Brand Name or Equivalent to Swagelok part number SS- 400-3 with the following minimum specifications:

4.11. Reducing Union: 1/4" X 1/4" Female NPT; Quantity of Twenty-Four (24) Each Brand Name or Equivalent to Swagelok part number SS-400-7-4 with the following minimum specifications:

4.12. 1/4" Elbow; Quantity of Fifty-Seven (57) Each Brand Name or Equivalent to Swagelok part number S-

400-9 with the following minimum specifications:

4.13. Pressure Gauge Snubber; Quantity of Twenty-Four (24) Each Brand Name or Equivalent to Grainger part number 5TUN0 with the following minimum specifications:

a. Stainless Steel Body

b. 1/4" FNPT to 1/4" MNPT

4.14. 1" SAE MS Male Connector; Quantity of Thirteen (13) Each Brand Name or Equivalent to Hylok part number CSC-16-16U-S316 with the following minimum specifications:

a. 1" Double Ferrule Compression fitting x 1-5/16”-12 Threaded Connection

b. Viton (Fluorocarbon (FKM)) O-ring

4.15. 1/2" SAE MS Male Connector; Quantity of Thirteen (13) Each Brand Name or Equivalent to Hylok part number CSC-8-8U-S316 with the following minimum specifications:

a. 3/4" Double Ferrule Compression Fitting x ¾”-16 Threaded Connection

b. Viton (Fluorocarbon (FKM)) O-ring

4.16. 3/8" Thick Steel Plate; Quantity of Twelve (12) Each with the following minimum specifications:

a. A36 Steel Plate

b. 12" x 4#" x 3/8" (Dimensions shall match Base Dimensions, +4" to L Dimension)

4.17. 1/2" Loop Clamp; Quantity of Twenty-Five (25) Each Brand Name or Equivalent to McMaster part number 8863T36 with the following minimum specifications:

a. Galvanized Steel Loop Clamp

b. Designed for 1/2" Tube.

4.18. 1" Elbow; Quantity of Twenty-Four (24) Each Brand Name or Equivalent to Swagelok part number SS-

1610-9 with the following minimum specifications:

b. 90 Degree Elbow Configuration

c. 1" Nominal Double Ferrule Compression Style Tube Connections

d. 3,000 PSIG Rating.

4.19. 1/2" Elbow; Quantity of Thirty-Five (35) Each Brand Name or Equivalent to Swagelok part number SS- 810-9 with the following minimum specifications:

b. 90 Degree Elbow Configuration

c. 1/2" Nominal Compression Style Tube Connections

d. 3,000 PSIG Rating.

4.20. 1/2" Straight Union FNPT x Compression Fitting; Quantity of Thirteen (13) Each Brand Name or

Equivalent to Swagelok part number SS-810-7-8 with the following minimum specifications:

b. One (1) ½” Nominal Double Ferrule Compression Style Connection

c. One (1) ½” Nominal Female NPT Connection

d. 3,000 PSIG Rating

4.21. 1/2" Straight Union MNPT x Compression Fitting; Quantity of Thirteen (13) Each Brand Name or

Equivalent to Swagelok part number SS-810-1-8 with the following minimum specifications:

b. One (1) ½” Nominal Double Ferrule Compression Style Connection

c. One (1) ½” Nominal Male NPT Connection

d. 3,000 PSIG Rating

4.22. 1/2" Bulkhead Union Jam Nut; Quantity of Thirty-Five (35) Each Brand Name or Equivalent to Hylok part number CLN-8-S316 with the following minimum specifications:

b. 1/2" Nominal

c. Compatible with thread pitch on Hylok Item# CBUO-8L113-S316.

4.23. 1/2" Union Tee; Quantity of Thirteen (13) Each Brand Name or Equivalent to Swagelok part number SS-

810-3 with the following minimum specifications:

b. 1/2" Nominal Double Ferrule Compression Tube Connections

4.24. ¼” Vibration Damping Loop Clamp; Quantity of Forty (40) Each Brand Name or Equivalent to

McMaster-Carr part number 3177T7 with the following minimum specifications:

a. Stainless Steel

b. 1/4" ID

c. Silicone Cushion

d. Loop Style Clamp for Use of One Fastener

4.25. Pan Head Screw; Quantity of Fifty (50) Each Brand Name or Equivalent to McMaster-Carr part number

91400A242 with the following minimum specifications:

a. 18-8 Stainless Steel

b. Phillips Drive

c. 10-24 Thread

d. 1/2" Length

4.26. 1-1/8” Square Bar Stock; Quantity of Six (6) Feet Each Brand Name or Equivalent to McMaster-Carr part number 9143K741 with the following minimum specifications:

a. Low-Carbon Steel

b. Dimension of 1-1/8" x 1-1/8"

c. ASTM A108 Compliant

4.27. Hex Head Screw; Quantity of One-Hundred (100) Each Brand Name or Equivalent to McMaster-Carr part number 91247A546 with the following minimum specifications:

a. Grade 5

b. ASME B18.2.1 Compliant

c. 1/4" -20 Thread

d. 1-1/2" Length

4.28. Phillips Flat Head Screw; Quantity of Sixty (60) Each Brand Name or Equivalent to McMaster-Carr part number 91771A856 with the following minimum specifications:

a. 18-8 Stainless Steel

b. Phillips Drive

c. 1/2"- 13 Thread

d. 1" Length

4.29. Steel Hex Nut; Quantity of One Hundred (100) Each Brand Name or Equivalent to McMaster-Carr part number 95462A033 with the following minimum specifications:

a. Grade 5

b. Zinc Plated

c. 1/2" - 13 Thread

4.30. Washer; Quantity of Seventy-Five (75) Each Brand Name or Equivalent to McMaster-Carr part number

90107A033 with the following minimum specifications:

a. 316 Stainless Steel, Designed for 1/2" screw with 0.531 ID and 1.25" OD

4.31. 1/2" Check Valve; Quantity of Thirteen (13) Each: Swagelok SS-CHS8-1

b. Poppet Style Check Valve

c. 1/2" Nominal Double Ferrule Compression Style Tube Connections

d. 1 PSIG Fixed Cracking Pressure

e. Fluorocarbon (FKM) Seals

f. 10 PSIG Pressure Drop @ 5 GPM (water).

5. SKID MOUNTED HYDRAULIC POWER UNITS TESTING AND TESTING REPORTS: The Contractor shall test hydraulic power units to ensure full functionality in accordance with standard commercial practices and the Contractor’s customary procedures. Correction or replacement requirements identified during testing shall be at no cost to the Government. The Contractor must submit a test plan to the Government not less than ten (10) calendar days prior to the first scheduled shop test; the test plan shall include shop testing date and location. Contractor shall allow for, and coordinate timing for one (1) visit by designated Government personnel at the Contractor's place of testing for the duration of the testing. Contractor shall submit one (1) complete test report for each hydraulic power unit electronically in portable document format (PDF) to the Government within three (3) business days following test completion. At a minimum the test report must document for each assembly the following parameters:

a. Confirmation that assembly is built to drawings and specifications

b. Strainer and filter internals installed

c. Prime system with lube oil that has a viscosity of ~330 SSU.

d. Test hydraulic power unit at pressure up to 2500psi, or the maximum rated pressure for any individual component, whichever is less.

e. Record flow rate in gallons per minute, motor rpm, and motor bhp with a discharge pressure of 1,200

PSIG while pumping a hydraulic fluid with a viscosity of ~ 330 SSU.

f. Record motor amp draw at various pressures

g. Record direction of rotation for both pump and motor.

h. Ensure leak free operation and repair if necessary.

6. DELIVERABLES: The Contractor shall provide any associated documentation and operating manuals associated with the skid mounted hydraulic power units upon delivery. Contractor prepared documents shall be comprehensive in both content and presentation that represents brevity, clarity, and precision. Text, figures, illustrations shall have not typographical errors, inconsistent data, or misspelled words. Electronic deliverables shall be provided to the Government utilizing ARL Safe Web application.

6.1. As-Built Drawings: Contractor shall provide one (1) complete hard copy and one (1) complete electronic copy in Autodesk Inventor format.

6.2. Native Files of the model: Contractor shall provide one (1) complete electronic copy in Autodesk Inventor format.

7. ACCEPTANCE OF HYDRAULIC POWER UNITS: The place of acceptance will be at the delivery location. Contractor shall be responsible for maintaining product’s condition to the point of delivery prior to acceptance. Upon receipt at the delivery location, the Government will appraise the hydraulic power units for quantity, damage in transit, and possible substitution or fraud.

8. DELIVERY LOCATION: Skid mounted hydraulic units and associated material/hardware shall be delivered F.O.B destination and received at the below delivery location no later than 20 September 2021. All shipments shall be delivered to:

US Army Corps of Engineers Chief Joseph Dam Operating Project ATTN: Warehouse Highway 17 and Pearl Hill Rd Bridgeport, WA 98813-1120

**SPECIAL INSTRUCTIONS: All deliveries must take place during CJD working hours, 8:00am – 4:00pm Monday - Thursday except for Federal holidays. There is no one on site to accept Friday deliveries.

CLAUSES INCORPORATED BY REFERENCE

52.202-1 Definitions JUN 2020 52.203-3 Gratuities APR 1984 52.203-6 Restrictions On Subcontractor Sales To The Government JUN 2020 52.203-6 Alt I Restrictions On Subcontractor Sales To The Government

(JUN 2020) -- Alternate I

OCT 1995

52.203-12 Limitation On Payments To Influence Certain Federal Transactions

JUN 2020

52.204-7 System for Award Management OCT 2018 52.204-10 Reporting Executive Compensation and First-Tier

Subcontract Awards

JUN 2020

52.204-13 System for Award Management Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting AUG 2020 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-22 Alternative Line Item Proposal JAN 2017 52.204-23 Prohibition on Contracting for Hardware, Software, and

Services Developed or Provided by Kaspersky Lab and Other Covered Entities.

JUL 2018

52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.

OCT 2020

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

AUG 2020

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, or Proposed for Debarment

JUN 2020

52.209-7 Information Regarding Responsibility Matters OCT 2018 52.209-10 Prohibition on Contracting With Inverted Domestic

Corporations

NOV 2015

52.212-1 Instructions to Offerors--Commercial Items JUN 2020 52.212-4 Contract Terms and Conditions--Commercial Items OCT 2018 52.219-6 Notice Of Total Small Business Set-Aside NOV 2020 52.219-8 Utilization of Small Business Concerns OCT 2018 52.219-33 Nonmanufacturer Rule MAR 2020 52.222-3 Convict Labor JUN 2003 52.222-19 Child Labor -- Cooperation with Authorities and Remedies JAN 2020 52.222-21 Prohibition Of Segregated Facilities APR 2015 52.222-35 Equal Opportunity for Veterans JUN 2020 52.222-36 Equal Opportunity for Workers with Disabilities JUN 2020 52.222-37 Employment Reports on Veterans JUN 2020 52.222-40 Notification of Employee Rights Under the National Labor

Relations Act

DEC 2010

52.222-50 Combating Trafficking in Persons OCT 2020 52.223-6 Drug-Free Workplace MAY 2001 52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

JUN 2020

52.225-13 Restrictions on Certain Foreign Purchases FEB 2021 52.232-8 Discounts For Prompt Payment FEB 2002 52.232-11 Extras APR 1984 52.232-17 Interest MAY 2014 52.232-25 Prompt Payment JAN 2017

52.232-33 Payment by Electronic Funds Transfer--System for Award Management

OCT 2018

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.233-1 Disputes MAY 2014 52.233-3 Protest After Award AUG 1996 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.242-13 Bankruptcy JUL 1995 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.247-34 F.O.B. Destination NOV 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7006 Billing Instructions OCT 2005 252.204-7008 Compliance With Safeguarding Covered Defense Information

Controls

OCT 2016

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

DEC 2019

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

MAY 2016

252.204-7016 Covered Defense Telecommunications Equipment or Services -- Representation

DEC 2019

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services -- Representation

DEC 2019

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

JAN 2021

252.204-7020 NIST SP 800-171 DoD Assessment Requirements NOV 2020 252.209-7004 Subcontracting With Firms That Are Owned or Controlled By

The Government of a Country that is a State Sponsor of Terrorism

MAY 2019

252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations

SEP 2019

252.215-7007 Notice of Intent to Resolicit JUN 2012 252.215-7008 Only One Offer JUL 2019 252.225-7002 Qualifying Country Sources As Subcontractors DEC 2017 252.225-7012 Preference For Certain Domestic Commodities DEC 2017 252.225-7048 Export-Controlled Items JUN 2013 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.232-7017 Accelerating Payments to Small Business Subcontractors--

Prohibition on Fees and Consideration

APR 2020

252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment DEC 2012 252.244-7000 Subcontracts for Commercial Items JAN 2021 252.247-7022 Representation of Extent of Transportation by Sea. JUN 2019 252.247-7023 Transportation of Supplies by Sea FEB 2019

CLAUSES INCORPORATED BY FULL TEXT

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (FEB 2021)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision --

“Covered telecommunications equipment or services” has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

“Economically disadvantaged women-owned small business (EDWOSB) Concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except--

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Predecessor” means an entity that is replaced by a successor and includes any predecessors of the predecessor.

“Reasonable inquiry” has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate--

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

“Sensitive technology”--

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically--

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

“Service-disabled veteran-owned small business concern”--

(1) Means a small business concern--

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

"Small business concern"--

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

“Small disadvantaged business concern”, consistent with 13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

“Subsidiary” means an entity in which more than 50 percent of the entity is owned--

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

“Successor” means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term “successor” does not include new offices/divisions of the same company or a company that only changes its name.

The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

“Veteran-owned small business concern” means a small business concern--

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

"Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

“Women-owned small business concern” means a small business concern--

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; or

(2) Whose management and daily business operations are controlled by one or more women.

“Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)”, means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

(b) (1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications--Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs __.

[Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any.

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a small business concern.

(2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. (Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.) The offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, ( ___ ) is not a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, ( ___ ) is not a women-owned small business concern.

(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that--

(i) It [ ___ ] is, [ ___ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ___ .] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that--

(i) It [ ___ ] is, [ ___ ] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ___ -.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.

(8) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:

(10) HUBZone small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, as part of its offer, that--

(i) It [ ___ ] is, [ ___ ] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and

(ii) It [ ___ ] is, [ ___ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: ___ .] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.

(d) Certifications and representations required to implement provisions of Executive Order 11246--

(1) Previous Contracts and Compliance. The offeror represents that--

(i) It ( ___ ) has, ( ___ ) has not, participated in a previous contract or subcontract subject either to the Equal Opportunity clause of this solicitation, the and

(ii) It ( ___ ) has, ( ___ ) has not, filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that--

(i) It ( ___ ) has developed and has on file, ( ___ ) has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR Subparts 60-1 and 60-2), or

(ii) It ( ___ ) has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American --Supplies, is included in this solicitation.)

(1) (i) The Offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product.

(ii) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products.

(iii) The terms "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies."

(2) Foreign End Products:

Line item No.