A.02.01_-_Combined_Synopsis_and_Solicitation_for_Riley_Creek_42_Ammendment_.pdf

(1) Action Code. P

(2) Date. 20 November

(3) Year. 2015

(4) Contracting Office Zip Code. 98134

(5) Classification Code. S

(6) Contracting Office Address. Contracting Division, Bldg 1202, 4735 East Marginal

Way South, Seattle, WA 98134

(7) Subject. Park Attendants

(8) Proposed Solicitation Number. W912DW-16-Q-0011

(9) Closing Response Date. 11 December 2015

(10) Contact Point or Contracting Officer. Darrell Hutchens 206-316-3877 email:

darrell.d.hutchens@usace.army.mil

(11) Contract Award: TBD

(12) Contract Award Dollar Amount. TBD

(13) Contract Line Item Number(s). see attached schedule

(14) Contract Award Date. TBD

(15) Contractor. TBD

(16) Description. Non-personal services to provide for Custodial Park Attendants at the Albeni Falls Dam Recreation Area, Riley Creek 42.

(17) Place of Contract Performance. Albeni Falls Dam Recreational Area, Bonner County, Idaho.

(18) Set-aside Status. Total Small Business Set-aside.

(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation;

quotes are being requested and a written solicitation will not be issued.

(ii) The solicitation number is W912DW-16-Q-0011. The solicitation is issued as a Request for Quotation (RFQ).

(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-76, effective 25 August 2014.

(iv) This requirement is 100% Small Business Set-aside and the NAICS code is 561790; the small business size standard is $7.5M.

(v) A list of contract line item number(s) and items, quantities and units of measure, (including options) is provided below.

CLIN Item Qty U/M

0001 Base Year: Park Attendant Services 1 Job Detailed specifications/requirements are provided with the CLIN Schedule.

(vi) Services are to be performed in accordance with the provided Performance Specification Statement.

(vi) All items are to be awarded to the offeror who provides the lowest priced technically acceptable quote.

(vii) The provision at 52.212-1, Instructions to Offerors -- Commercial, applies to this acquisition and a statement regarding any addenda to the provision.

(viii) The provision at 52.212-2, Evaluation – Commercial Items, applies to this acquisition.

(ix) Quoters shall include a completed copy of the provision at 52.212-3 Alt 1, Offeror Representations and Certifications -- Commercial Items, with their offer.

(x) The clause at 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition.

(xi) The clause at 52.212-5 (Dev), Contract Terms and Conditions Required To Implement

Statutes Or Executive Orders -- Commercial Items, applies to this acquisition

(xii) W912DW-16-Q-0011 contains no additional contract requirement(s) or terms and conditions (such as contract financing arrangements or warranty requirements) determined by the contracting officer to be necessary for this acquisition and consistent with customary commercial practices.

(xiii) Defense Priorities and Allocations System (DPAS) and assigned ratings do not apply to this acquisition.

(xiv) Quotes are due on Thursday, December 11, 2014 by 12:00 PM Pacific Time. Mailed quotes shall be accepted before closing at U.S. Army Corps of Engineers, Seattle District, PO Box 3755, Seattle, WA 98124. Physical street address is U.S. Army Corps of Engineers, Seattle District, 4735 E Marginal Way S, Bldg 1202, Seattle, WA emailed quotes shall contain the RFQ No. W912DW-16-Q-0011 in the subject line and emailed to the following email address: Darrell.d.hutchens@usace.army.mil.

(xv) Darrell Hutchens is the individual to contact for information regarding this solicitation. Phone number 206-316-3877.

W912DW-16-Q-0011

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job

RILEY CREEK 42 PARK ATTENDANT RILEY CREE

K 42 PARK ATTENDANT PARK ATTENDANT SERVICES FOR RILEY

CREEK RECREATION AREA SMALL BUSINESS 94.5 DAYS - 9 MAY -23

SEPTEMBER 2016 94.5 DAYS INCLUDES 2 DAYS INCLUSIVEOF THE

DATES SHOWN THAT ARE NOT NORMALLY USED.LINDA LAMB COR

BASE YEAR --- PROJECT NO.: 451341

Riley Creek 42 Fee/Custodian Park Attendant

(Provide Quote for 0001 Here)

0001 Riley Creek 42 Fee/Custodian Park Attendant. 94 ½ day contract, plus 2 extra days if needed*, for the period of 09 May 2016 through 23 Sep. 2016. In accordance with the attached Performance Work Statement.

QUANTITY UNIT UNIT PRICE(per day)

AMOUNT

94 Day $____________

½ Day $____________

2 Day $____________

Total: $____________

FOB: Destination

PURCHASE REQUEST NUMBER: W68MD952941934

FFP

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002 1 Job

OPTION RILEY CREEK 42 PARK ATTENDANT RILEY CREE

K 42 PARK ATTENDANT PARK ATTENDANT SERVICES FOR RILEY

CREEK RECREATION AREASMALLBUSINESS 93.5 DAYS - 8 MAY -20

SEPTEMBER 2017 93.5 DAYS INCLUDES 2 DAYS INCLUSIVEOF THE

DATES SHOWN THAT ARE NOT NORMALLY USED.LINDA LAMB COR

BASE YEAR --- PROJECT NO.: 451341

0002 Riley Creek 42 Fee/Custodian Park Attendant. 93 ½ day contract, plus 2 extra days if needed*, for the period of 08 May 2017 through 20 Sep. 2017. In accordance with the attached Performance Work Statement.

QUANTITY UNIT UNIT PRICE(per day)

AMOUNT

93 Day $____________

½ Day $____________

2 Day $____________

Total: $____________

*Two extra days are inclusive of the contract dates and only used if there is a special need for additional work.

FOB: Destination

FFP

NET AMT

0001*

Instructions to Quoters

1. REPRESENTATIONS AND CERTIFICATIONS CONTAINED HEREIN MUST BE

COMPLETED BY QUOTERS AND RETURNED WITH QUOTES:

IF YOUR REPRESENTATIONS AND CERTIFICATIONS ARE REGISTERED IN THE

“SYSTEM FOR AWARD MANAGEMENT” (SAM) CHECK HERE . IF NOT,

YOU CAN REGISTER ONLINE AT www.sam.gov

2. Marking of Quote Envelopes:

Envelopes shall be plainly marked as follows:

Quote for: Park Attendants, Albeni Falls Dam Recreation Area, Riley Creek 42, Bonner County, Idaho

Request for Quote No.: W912DW-16-Q-0011 Closing Date and Time: 11 December 2015, 12:00 P.M. Pacific Time

AMENDMENTS NUMBERED________HAVE BEEN RECEIVED

3. Faxed quotes will NOT be accepted. Email quotes shall be accepted before closing at e-mail address darrell.d.hutchens@usace.army.mil. For questions call 206-764-6084. Mailed quotes shall be accepted before closing at US Army Corps of Engineers, Seattle District, PO Box 3755 Seattle, WA. 98124-3755.

Please note commercial carriers will not deliver to PO Boxes. If using a commercial carrier, send proposals to: Darrell D. Hutchens, Contract Specialist, U.S. Army Corps of Engineers, Seattle District, CECT-NWS- P, 4735 East Marginal Way S., Bldg #1202.

4. The contractor receiving an award is required to be registered in the SAM (System for Awards Management)

5. PROSPECTIVE CONTRACTORS: Contractors are required to be registered in the System for Awards Management (SAM) for awards resulting from solicitations.

This rule more efficiently implements the Debt Collection Improvement Act of 1996, as it requires contractors to be registered in SAM for consideration of future solicitations, awards, and payment.

Registration is required prior to award of any contract, basic agreement, basic ordering agreement, or blanket purchase agreement from a solicitation.

LACK OF REGISTRATION IN THE SAM DATABASE WILL MAKE A QUOTE INELIGIBLE

FOR AWARD.

The web site may be accessed at www.sam.gov

6. Award shall be made to the offeror with the lowest priced technically acceptable quote.

7. Required Submittals:

a) Instruction Page (2 pages) Paragraph 1 – Indicate if you are registered in ORCA (Online Representations and Certifications.

Paragraph 2 – Must acknowledge any/all amendments to the solicitation.

Paragraph 8 – Must fill in all company information requested

b) Fill in all pricing information.

c) FAR Provision 52.212-3 Alt I OFFEROR REPRESENTATIONS AND CERTIFICATIONS

(JUN 2008)

d) DFARS Provision 252.209-7993 Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Under Any Federal Law – Fiscal Year 2014 Appropriations (DEVIATION 2014-O00009)(FEB 2014).

e) Technical submission in accordance with FAR provision 52.212-2 Evaluation – Commercial Items. (Includes both Relevant Experience and Past Performance information – Past Performance Questionnaires are located at the end of this section)

All of these must be filled in and returned in order to be eligible for evaluation.

DO NOT return the rest of the solicitation form.

8. The contractor is required to provide the following information with your quote:

Federal Taxpayer’s ID Number:

DUNS Number:

Cage Code Number This requires registration in SAM, web site for registration is www.sam.gov Remit to Address:

Company Name:

Address:

City/State/Zip:

Phone & Fax Numbers:

Point of Contact:

E-Mail Address:

All quoted items must meet the requirements of the Request for Quote (RFQ) including specifications stated in all attachments.

Multiple quotes are not accepted for this RFQ. If multiple quotes are received only one quote (as determined by the Contracting Officer) will be evaluated by the Government. The quote shall be determined acceptable based on the date and time received via fax, email or physical delivery.

The contractor should list any special features or warranty information applicable to the quoted product(s).

ADJECTIVE RATINGS AND DEFINITIONS TO BE USED TO BEST REFLECT

YOUR EVALUATION OF THE CONTRACTOR’S PERFORMANCE

RATING DEFINITION NOTE

(E) Exceptional Performance meets contractual requirements and exceeds many to the Government/Owner’s benefit. The contractual performance of the element or sub-element being assessed was accomplished with few minor problems for which corrective actions taken by the contractor was highly effective.

An Exceptional rating is appropriate when the Contractor successfully performed multiple significant events that were of benefit to the Government/Owner. A singular benefit, however, could be of such magnitude that it alone constitutes an Exceptional rating. Also, there should have been NO significant weaknesses identified.

(VG) Very Good Performance meets contractual requirements and exceeds some to the Government’s/Owner’s benefit. The contractual performance of the element or sub-element being assessed was accomplished with some minor problems for which corrective actions taken by the contractor were effective.

A Very Good rating is appropriate when the Contractor successfully performed a significant event that was a benefit to the Government/Owner. There should have been no significant weaknesses identified.

(S) Satisfactory Performance meets minimum contractual requirements. The contractual performance of the element or sub-element contains some minor problems for which corrective actions taken by the contractor appear or were satisfactory.

A Satisfactory rating is appropriate when there were only minor problems, or major problems that the contractor recovered from without impact to the contract. There should have been NO significant weaknesses identified. Per DOD policy, a fundamental principle of assigning ratings is that contractors will not be assessed a rating lower than Satisfactory solely for not performing beyond the requirements of the contract.

(M) Marginal Performance does not meet some contractual requirements. The contractual performance of the element or sub-element being assessed reflects a serious problem for which the contractor has not yet identified corrective actions. The contractor's proposed actions appear only marginally effective or were not fully implemented.

A Marginal is appropriate when a significant event occurred that the contractor had trouble overcoming which impacted the Government/Owner.

(U) Unsatisfactory Performance does not meet most contractual requirements and recovery is not likely in a timely manner. The contractual performance of the element or sub-element contains serious problem(s) for which the contractor's corrective actions appear or were ineffective.

An Unsatisfactory rating is appropriate when multiple significant events occurred that the contractor had trouble overcoming and which impacted the Government/Owner. A singular problem, however, could be of such serious magnitude that it alone constitutes an unsatisfactory rating.

(N) Not Applicable No information or did not apply to your contract Rating will be neither positive nor negative.

TO BE COMPLETED BY CLIENT

PLEASE CIRCLE THE ADJECTIVE RATING WHICH BEST REFLECTS

YOUR EVALUATION OF THE CONTRACTOR’S PERFORMANCE.

1. QUALITY:

a) Quality of technical data/report preparation efforts E VG S M U N

b) Ability to clean a multiple shower/restroom facility in a timely manner, ability to return a used campsite into a safe and clean camping environment in a timely manner

E VG S M U N

c) Timeliness/effectiveness of adherence to delivery schedules including aspects of performance, and resolution to questions or problems

E VG S M U N

d) Ability to work with computers and automated equipment as it relates to record keeping, collection and depositing of fees.

E VG S M U N

2. SCHEDULE/TIMELINESS OF PERFORMANCE:

a) Compliance with contract delivery/completion schedules. E VG S M U N

3. CUSTOMER SATISFACTION:

a) Individual(s) was reasonable and cooperative in dealing with your staff (including the ability to successfully resolve disagreements/disputes;

responsiveness to administrative reports and business like communications)

E VG S M U N

b) To what extent was the individual(s) cooperative, business like, and concerned with the interests of the customer?

E VG S M U N

c) Overall customer satisfaction E VG S M U N

4. MANAGEMENT/ PERSONNEL/LABOR

a) Effectiveness of on-site management of labor force? E VG S M U N

b) Government Property Control E VG S M U N

c) Knowledge/expertise of Park Operations demonstrated by the individual(s) E VG S M U N

d) Ability to simultaneously manage multiple projects E VG S M U N

e) Ability to assimilate and incorporate changes in requirements and/or priority, including planning, execution and response to Government changes

E VG S M U N

5. COST/FINANCIAL MANAGEMENT

a) Please rate the individual(s) timeliness and accuracy in submitting monthly invoices with appropriate back-up documentation.

Yes No

6. SAFETY/SECURITY

a) To what extent was the individual(s) able to maintain an environment of safety, adhere to its approved safety plan, and respond to safety issues?

(Includes: following the users rules, regulations, and requirements regarding housekeeping, safety, correction of noted deficiencies, etc.)

E VG S M U N

7. GENERAL

a) Ability to successfully respond to emergency situations (including notifying point of contact in a timely manner regarding urgent issues).

E VG S M U N

b) In summary, provide an overall rating for the work performed by this individual(s).

E VG S M U N

c) Would you hire this individual again? (If no, please explain below) Yes No

Please provide responses to the questions above (if applicable) and/or additional remarks. Furthermore, please provide a brief narrative addressing specific strengths, weaknesses, deficiencies, or other comments which may assist our office in evaluating performance risk (please attach additional pages if necessary):

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 N/A N/A N/A Government

0002 N/A N/A N/A Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

0001 11-DEC-2015 1 US ARMY CORPS OF ENGINEERS,

SEATTLE DIST

4735 E. MARGINAL WAY SOUTH

SEATTLE WA 98134-2388

(206)764-3772

FOB: Destination

W68MD9

0002 11-DEC-2016 1 (SAME AS PREVIOUS LOCATION)

FOB: Destination

W68MD9

CLAUSES INCORPORATED BY REFERENCE

52.204-7 System for Award Management JUL 2013

52.204-13 System for Award Management Maintenance JUL 2013

52.204-16 Commercial and Government Entity Code Reporting JUL 2015

52.204-18 Commercial and Government Entity Code Maintenance JUL 2015

52.204-19 Incorporation by Reference of Representations and Certifications.

DEC 2014

52.209-2 Prohibition on Contracting with Inverted Domestic Corporations--Representation

NOV 2015

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations

NOV 2015

52.212-1 Instructions to Offerors--Commercial Items OCT 2015

52.212-3 Alt I Offeror Representations and Certifications--Commercial Items (NOV 2015) Alternate I

OCT 2014

52.212-4 Contract Terms and Conditions--Commercial Items MAY 2015

52.217-8 Option To Extend Services NOV 1999

52.219-1 Alt I Small Business Program Representations (Sept 2015) Alternate I

SEP 2015

52.219-6 Notice Of Total Small Business Set-Aside NOV 2011

52.222-19 Child Labor -- Cooperation with Authorities and Remedies JAN 2014

52.222-21 Prohibition Of Segregated Facilities APR 2015

52.222-22 Previous Contracts And Compliance Reports FEB 1999

52.222-55 Minimum Wages Under Executive Order 13658 DEC 2014

52.223-18 Encouraging Contractor Policies To Ban Text Messaging While Driving

AUG 2011

52.225-13 Restrictions on Certain Foreign Purchases JUN 2008

52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-- Representation and Certifications.

OCT 2015

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.232-40 Providing Accelerated Payments to Small Business Subcontractors

DEC 2013

52.233-1 Disputes MAY 2014

52.233-3 Protest After Award AUG 1996

52.233-4 Applicable Law for Breach of Contract Claim OCT 2004

52.237-2 Protection Of Government Buildings, Equipment, And Vegetation

APR 1984

52.246-16 Responsibility For Supplies APR 1984

252.203-7000 Requirements Relating to Compensation of Former DoD Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013

252.203-7003 Agency Office of the Inspector General DEC 2012

252.203-7005 Representation Relating to Compensation of Former DoD Officials

NOV 2011

252.203-7998 (Dev) Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements—Representation.

(DEVIATION 2015-O0010)

FEB 2015

252.203-7999 (Dev) Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements. (DEVIATION 2015- O0010)

FEB 2015

252.204-7003 Control Of Government Personnel Work Product APR 1992

252.204-7004 Alt A System for Award Management Alternate A FEB 2014

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

SEP 2015

252.204-7015 Disclosure of Information to Litigation Support Contractors FEB 2014

252.225-7001 Buy American And Balance Of Payments Program-- Basic (Nov 2014)

NOV 2014

252.225-7048 Export-Controlled Items JUN 2013

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

JUN 2012

252.232-7010 Levies on Contract Payments DEC 2006

252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel

JUN 2013

252.243-7001 Pricing Of Contract Modifications DEC 1991

252.244-7000 Subcontracts for Commercial Items JUN 2013

252.247-7023 Transportation of Supplies by Sea APR 2014

CLAUSES INCORPORATED BY FULL TEXT

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC

2014)

The Contractor's representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.

(End of clause)

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

EVALUATION FACTORS FOR AWARD

Evaluation:

The Government will evaluate each proposal on a technically acceptable/non-acceptable basis only with respect to the technical evaluation factor (criteria) described herein. The technical evaluation of each proposal will be on the basis of two Technical Evaluation Factors (see Criteria A and B below). Award will be to the Offeror who presents the technically acceptable proposal with the overall total lowest price.

Note that the definition of “Relevant” is having a logical connection with the requirements in this request for proposal; that is, featuring work that is similar in nature, magnitude, and complexity to the current requirement.

Criterion A – Relevant Experience

The offeror’s quote must demonstrate experience in performing park attendant type duties.

The quote should contain descriptions that clearly demonstrate the following experience:

1. Experience working with the public in a recreation setting for a minimum of 6 months.

2. Experience cleaning restrooms and showers for a minimum of 3 months.

3. Experience working in an outdoor setting for a minimum of 3 months.

The proposal shall include a minimum of one (1), but no more than three (3) representations of the experience described above. Experience does not necessarily need to be with the Federal Government; it does need to be relevant and MUST contain requisite position/job specific information in Table 1.

For each position/job, provide position/job specific information, provide the following:

TABLE 1 – POSITION/JOB SPECIFIC INFORMATION

1. Project name, location, and dates.

2. Description of the position/job scope of work: At a minimum, discuss the specific role that the offeror served on the job.

3. Position/Job relevance description: Provide a description of how the job is relevant to each identified area of experience.

4. Current primary point of contact for customer: At a minimum, provide name, relationship to the job, agency/firm, and phone number.

All Criterion A job positions submitted must have been completed within the last five years from issue date of this solicitation and should relevant. Each representation must include a description of how the job clearly demonstrates relevant experience. Responses to the Criterion A shall not exceed two (2) pages per job.

Ratings Method: The method of rating Criterion A shall be as follows:

Acceptable: The Offeror’s quote clearly demonstrates requisite experience in each area of Criterion A work in one or more of the submitted position/job description.

Non-Acceptable: One or more of the Criterion A areas of experience is not clearly demonstrated in the Offeror’s submitted projects.

Criterion B – Past Performance

Past Performance

Offers may provide past performance in the form of customer reviews, appraisals, or any other feedback concerning the quality of performance from a customer. Only past performance information from the past five years (five years from the date of solicitation issue) is acceptable. Only past performance information for relevant projects is acceptable. Include any contract numbers for former USACE awards in your quote.

The Government shall consider any submitted information, as well as information obtained from any other sources such as online past performance databases..

Ratings Method: The method of rating Criterion B shall be as follows:

Acceptable: Based on the offeror’s performance record, the Government has a reasonable expectation that the offeror will successfully perform the required effort, or the offeror’s performance record is unknown. (See note below.)

Unacceptable: Based on the offeror’s performance record, the Government has no reasonable expectation that the offeror will be able to successfully perform the required effort.

Note: In the case of an offeror without a record of relevant past performance or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the offeror may not be evaluated favorably or unfavorably on past performance (see FAR 15.305(a)(2)(iv)). Therefore, the offeror shall be determined to have unknown past performance. In the context of acceptability/unacceptability, “unknown” shall be considered “acceptable.”

PRICE: Price is equally important as the technical evaluation in this proposal; its evaluation is independent of the evaluation of technical criteria. A review of price is for reasonableness. Price will be the determining factor for award after the determination of the technical acceptability of all offers. It is the Government’s intent to award to the Offeror who presents the lowest priced, technically acceptable proposal.

Technical and past performance, when combined, are equal to price.

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items (Deviation 2013-O0019) (NOV 2015) Alternate I (APR 2015)

(a) Notwithstanding the requirements of any other clause in this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b)(i) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(1) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)).

(2) 52.219-8, Utilization of Small Business Concerns (May 2004) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $550,000 ($1,000,000 for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(3) 52.222-17, Nondisplacement of Qualified Workers (JAN 2013) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(4) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).

(5) 52.222-35, Equal Opportunity for Veterans (Sep 2010) (38 U.S.C. 4212).

(6) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793).

(7) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(8) 52.222-41, Service Contract Act of 1965, (Nov 2007), (41 U.S.C. 351, et seq.)

(9) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)).

___ Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)).

(10) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.).

(11) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-- Requirements (Feb 2009) (41 U.S.C. 351, et seq.)

(12) 52.222-54, Employment Eligibility Verification (Jul 2012).

(13) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(14) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) 42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(15) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C.

Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247- 64.

(b) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of Clause)

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JULY 2013)

(a) Definitions. As used in this clause--

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause. Such a concern is ``not dominant in its field of operation'' when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity.

(b) If the Contractor represented that it was a small business concern prior to award of this contract, the Contractor shall rerepresent its size status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon the occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts--

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code assigned to this contract. The small business size standard corresponding to this NAICS code can be found at http://www.sba.gov/content/table-small-business-size-standards.

(d) The small business size standard for a Contractor providing a product which it does not manufacture itself, for a contract other than a construction or service contract, is 500 employees.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The

Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it ( ) is, ( ) is not a small business concern under NAICS Code - assigned to contract number .

(Contractor to sign and date and insert authorized signer's name and title).

(End of clause)

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/vffara.htm

(End of provision)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/vffara.htm

(End of clause)

WAGE DETERMINATION

WD 05-2159 (Rev.-17) was first posted on www.wdol.gov on 07/14/2015

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005-2159 Daniel W. Simms Division of | Revision No.: 17 Director Wage Determinations| Date Of Revision: 07/08/2015 Note: Executive Order (EO) 13658 establishes an hourly minimum wage of $10.10 for 2015 that applies to all contracts subject to the Service Contract Act for which the solicitation is issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.10 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Idaho Area: Idaho Statewide **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 12.27 01012 - Accounting Clerk II 13.83 01013 - Accounting Clerk III 15.09 01020 - Administrative Assistant 17.16 01040 - Court Reporter 22.66 01051 - Data Entry Operator I 11.51 01052 - Data Entry Operator II 12.57 01060 - Dispatcher, Motor Vehicle 17.87 01070 - Document Preparation Clerk 14.34 01090 - Duplicating Machine Operator 14.34 01111 - General Clerk I 11.17 01112 - General Clerk II 12.19 01113 - General Clerk III 13.68 01120 - Housing Referral Assistant 17.37 01141 - Messenger Courier 10.69 01191 - Order Clerk I 14.76 01192 - Order Clerk II 16.11 01261 - Personnel Assistant (Employment) I 13.55 01262 - Personnel Assistant (Employment) II 15.15 01263 - Personnel Assistant (Employment) III 16.89 01270 - Production Control Clerk 18.51 01280 - Receptionist 11.51 01290 - Rental Clerk 12.35 01300 - Scheduler, Maintenance 13.93 01311 - Secretary I 13.93 01312 - Secretary II 15.58 01313 - Secretary III 17.37 01320 - Service Order Dispatcher 16.49 01410 - Supply Technician 17.16 01420 - Survey Worker 11.40 01531 - Travel Clerk I 12.07

01532 - Travel Clerk II 12.66 01533 - Travel Clerk III 13.73 01611 - Word Processor I 13.03 01612 - Word Processor II 13.92 01613 - Word Processor III 15.58 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 17.65 05010 - Automotive Electrician 14.43 05040 - Automotive Glass Installer 14.24 05070 - Automotive Worker 14.07 05110 - Mobile Equipment Servicer 11.50 05130 - Motor Equipment Metal Mechanic 15.83 05160 - Motor Equipment Metal Worker 14.07 05190 - Motor Vehicle Mechanic 15.83 05220 - Motor Vehicle Mechanic Helper 11.50 05250 - Motor Vehicle Upholstery Worker 13.30 05280 - Motor Vehicle Wrecker 14.07 05310 - Painter, Automotive 15.03 05340 - Radiator Repair Specialist 15.27 05370 - Tire Repairer 10.02 05400 - Transmission Repair Specialist 15.83 07000 - Food Preparation And Service Occupations 07010 - Baker 11.89 07041 - Cook I 9.80 07042 - Cook II 11.37 07070 - Dishwasher 7.90 07130 - Food Service Worker 9.41 07210 - Meat Cutter 14.58 07260 - Waiter/Waitress 8.62 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 13.60 09040 - Furniture Handler 10.99 09080 - Furniture Refinisher 13.05 09090 - Furniture Refinisher Helper 11.51 09110 - Furniture Repairer, Minor 11.54 09130 - Upholsterer 12.83 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 8.95 11060 - Elevator Operator 8.95 11090 - Gardener 14.27 11122 - Housekeeping Aide 10.75 11150 - Janitor 11.06 11210 - Laborer, Grounds Maintenance 11.56 11240 - Maid or Houseman 8.80 11260 - Pruner 10.14 11270 - Tractor Operator 14.11 11330 - Trail Maintenance Worker 11.56 11360 - Window Cleaner 12.19 12000 - Health Occupations 12010 - Ambulance Driver 16.49 12011 - Breath Alcohol Technician 16.25 12012 - Certified Occupational Therapist Assistant 24.40 12015 - Certified Physical Therapist Assistant 21.99

12020 - Dental Assistant 14.94 12025 - Dental Hygienist 33.20 12030 - EKG Technician 24.91 12035 - Electroneurodiagnostic Technologist 24.91 12040 - Emergency Medical Technician 16.49 12071 - Licensed Practical Nurse I 14.53 12072 - Licensed Practical Nurse II 16.25 12073 - Licensed Practical Nurse III 18.12 12100 - Medical Assistant 14.79 12130 - Medical Laboratory Technician 17.53 12160 - Medical Record Clerk 13.47 12190 - Medical Record Technician 15.07 12195 - Medical Transcriptionist 15.16 12210 - Nuclear Medicine Technologist 32.30 12221 - Nursing Assistant I 10.66 12222 - Nursing Assistant II 11.99 12223 - Nursing Assistant III 13.08 12224 - Nursing Assistant IV 14.66 12235 - Optical Dispenser 14.76 12236 - Optical Technician 13.18 12250 - Pharmacy Technician 14.80 12280 - Phlebotomist 14.66 12305 - Radiologic Technologist 22.77 12311 - Registered Nurse I 22.72 12312 - Registered Nurse II 27.78 12313 - Registered Nurse II, Specialist 27.78 12314 - Registered Nurse III 33.61 12315 - Registered Nurse III, Anesthetist 33.61 12316 - Registered Nurse IV 40.02 12317 - Scheduler (Drug and Alcohol Testing) 20.13 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 16.36 13012 - Exhibits Specialist II 20.27 13013 - Exhibits Specialist III 24.80 13041 - Illustrator I 16.36 13042 - Illustrator II 20.27 13043 - Illustrator III 24.80 13047 - Librarian 22.59 13050 - Library Aide/Clerk 13.53 13054 - Library Information Technology Systems 20.57 Administrator 13058 - Library Technician 13.31 13061 - Media Specialist I 14.72 13062 - Media Specialist II 16.48 13063 - Media Specialist III 18.36 13071 - Photographer I 13.38 13072 - Photographer II 16.76 13073 - Photographer III 18.78 13074 - Photographer IV 23.09 13075 - Photographer V 28.39 13110 - Video Teleconference Technician 18.11 14000 - Information Technology Occupations 14041 - Computer Operator I 14.69

14042 - Computer Operator II 16.43 14043 - Computer Operator III 18.32 14044 - Computer Operator IV 20.50 14045 - Computer Operator V 22.54 14071 - Computer Programmer I 17.62 14072 - Computer Programmer II 22.88 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 14.69 14160 - Personal Computer Support Technician 20.50 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 27.58 15020 - Aircrew Training Devices Instructor (Rated) 33.36 15030 - Air Crew Training Devices Instructor (Pilot) 36.70 15050 - Computer Based Training Specialist / Instructor 27.58 15060 - Educational Technologist 20.74 15070 - Flight Instructor (Pilot) 36.70 15080 - Graphic Artist 18.46 15090 - Technical Instructor 18.36 15095 - Technical Instructor/Course Developer 22.46 15110 - Test Proctor 14.79 15120 - Tutor 14.79 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 8.97 16030 - Counter Attendant 8.97 16040 - Dry Cleaner 10.70 16070 - Finisher, Flatwork, Machine 8.97 16090 - Presser, Hand 8.97 16110 - Presser, Machine, Drycleaning 8.97 16130 - Presser, Machine, Shirts 8.97 16160 - Presser, Machine, Wearing Apparel, Laundry 8.97 16190 - Sewing Machine Operator 11.28 16220 - Tailor 11.90 16250 - Washer, Machine 9.39 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 14.91 19040 - Tool And Die Maker 22.33 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 12.95 21030 - Material Coordinator 18.51 21040 - Material Expediter 18.51 21050 - Material Handling Laborer 10.85 21071 - Order Filler 11.95 21080 - Production Line Worker (Food Processing) 12.95 21110 - Shipping Packer 12.87 21130 - Shipping/Receiving Clerk 12.87 21140 - Store Worker I 10.50 21150 - Stock Clerk 15.07 21210 - Tools And Parts Attendant 12.95 21410 - Warehouse Specialist 12.95

23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 21.20 23021 - Aircraft Mechanic I 20.19 23022 - Aircraft Mechanic II 21.20 23023 - Aircraft Mechanic III 22.26 23040 - Aircraft Mechanic Helper 13.63 23050 - Aircraft, Painter 19.01 23060 - Aircraft Servicer 16.63 23080 - Aircraft Worker 17.60 23110 - Appliance Mechanic 17.03 23120 - Bicycle Repairer 10.23 23125 - Cable Splicer 29.76 23130 - Carpenter, Maintenance 17.46 23140 - Carpet Layer 19.20 23160 - Electrician, Maintenance 20.50 23181 - Electronics Technician Maintenance I 21.33 23182 - Electronics Technician Maintenance II 22.66 23183 - Electronics Technician Maintenance III 26.15 23260 - Fabric Worker 16.56 23290 - Fire Alarm System Mechanic 18.62 23310 - Fire Extinguisher Repairer 15.33 23311 - Fuel Distribution System Mechanic 21.65 23312 - Fuel Distribution System Operator 17.67 23370 - General Maintenance Worker 16.45 23380 - Ground Support Equipment Mechanic 20.19 23381 - Ground Support Equipment Servicer 16.63 23382 - Ground Support Equipment Worker 17.60 23391 - Gunsmith I 15.33 23392 - Gunsmith II 17.65 23393 - Gunsmith III 21.89 23410 - Heating, Ventilation And Air-Conditioning 18.62 Mechanic 23411 - Heating, Ventilation And Air Contditioning 19.43 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 18.62 23440 - Heavy Equipment Operator 18.62 23460 - Instrument Mechanic 20.48 23465 - Laboratory/Shelter Mechanic 18.74 23470 - Laborer 10.85 23510 - Locksmith 17.48 23530 - Machinery Maintenance Mechanic 21.22 23550 - Machinist, Maintenance 17.44 23580 - Maintenance Trades Helper 13.09 23591 - Metrology Technician I 20.48 23592 - Metrology Technician II 21.51 23593 - Metrology Technician III 22.53 23640 - Millwright 22.43 23710 - Office Appliance Repairer 17.48 23760 - Painter, Maintenance 16.06 23790 - Pipefitter, Maintenance 21.74 23810 - Plumber, Maintenance 19.55 23820 - Pneudraulic Systems Mechanic 21.89 23850 - Rigger 21.88

23870 - Scale Mechanic 17.65 23890 - Sheet-Metal Worker, Maintenance 19.69 23910 - Small Engine Mechanic 14.51 23931 - Telecommunications Mechanic I 23.06 23932 - Telecommunications Mechanic II 24.50 23950 - Telephone Lineman 20.45 23960 - Welder, Combination, Maintenance 16.65 23965 - Well Driller 18.62 23970 - Woodcraft Worker 21.89 23980 - Woodworker 14.28 24000 - Personal Needs Occupations 24570 - Child Care Attendant 8.80 24580 - Child Care Center Clerk 12.47 24610 - Chore Aide 9.06 24620 - Family Readiness And Support Services 12.08 Coordinator 24630 - Homemaker 10.19 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 19.84 25040 - Sewage Plant Operator 15.28 25070 - Stationary Engineer 19.84 25190 - Ventilation Equipment Tender 13.95 25210 - Water Treatment Plant Operator 15.28 27000 - Protective Service Occupations 27004 - Alarm Monitor 16.88 27007 - Baggage Inspector 13.20 27008 - Corrections Officer 18.72 27010 - Court Security Officer 19.91 27030 - Detection Dog Handler 15.80 27040 - Detention Officer 18.72 27070 - Firefighter 18.98 27101 - Guard I 13.20 27102 - Guard II 15.80 27131 - Police Officer I 22.26 27132 - Police Officer II 24.73 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 11.94 28042 - Carnival Equipment Repairer 14.41 28043 - Carnival Equpment Worker 10.11 28210 - Gate Attendant/Gate Tender 14.60 28310 - Lifeguard 11.34 28350 - Park Attendant (Aide) 15.36 28510 - Recreation Aide/Health Facility Attendant 11.92 28515 - Recreation Specialist 15.92 28630 - Sports Official 13.01 28690 - Swimming Pool Operator 17.28 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 19.42 29020 - Hatch Tender 19.42 29030 - Line Handler 19.42 29041 - Stevedore I 16.97 29042 - Stevedore II 19.50 30000 - Technical Occupations

30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 35.77 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 24.67 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 27.16 30021 - Archeological Technician I 17.79 30022 - Archeological Technician II 20.00 30023 - Archeological Technician III 24.38 30030 - Cartographic Technician 24.39 30040 - Civil Engineering Technician 22.41 30061 - Drafter/CAD Operator I 17.59 30062 - Drafter/CAD Operator II 20.76 30063 - Drafter/CAD Operator III 21.94 30064 - Drafter/CAD Operator IV 25.54 30081 - Engineering Technician I 13.93 30082 - Engineering Technician II 15.62 30083 - Engineering Technician III 18.43 30084 - Engineering Technician IV 21.66 30085 - Engineering Technician V 26.49 30086 - Engineering Technician VI 30.94 30090 - Environmental Technician 22.32 30210 - Laboratory Technician 20.26 30240 - Mathematical Technician 24.45 30361 - Paralegal/Legal Assistant I 16.96 30362 - Paralegal/Legal Assistant II 21.01 30363 - Paralegal/Legal Assistant III 25.70 30364 - Paralegal/Legal Assistant IV 31.10 30390 - Photo-Optics Technician 24.45 30461 - Technical Writer I 20.81 30462 - Technical Writer II 25.45 30463 - Technical Writer III 27.75 30491 - Unexploded Ordnance (UXO) Technician I 22.74 30492 - Unexploded Ordnance (UXO) Technician II 27.51 30493 - Unexploded Ordnance (UXO) Technician III 32.97 30494 - Unexploded (UXO) Safety Escort 22.74 30495 - Unexploded (UXO) Sweep Personnel 22.74 30620 - Weather Observer, Combined Upper Air Or (see 2) 19.61 Surface Programs 30621 - Weather Observer, Senior (see 2) 23.97 31000 - Transportation/Mobile Equipment Operation Occupations 31020 - Bus Aide 10.06 31030 - Bus Driver 12.58 31043 - Driver Courier 12.40 31260 - Parking and Lot Attendant 8.69 31290 - Shuttle Bus Driver 13.52 31310 - Taxi Driver 9.78 31361 - Truckdriver, Light 13.52 31362 - Truckdriver, Medium 14.62 31363 - Truckdriver, Heavy 16.12 31364 - Truckdriver, Tractor-Trailer 16.12 99000 - Miscellaneous Occupations 99030 - Cashier 9.03 99050 - Desk Clerk 8.36 99095 - Embalmer 25.86 99251 - Laboratory Animal Caretaker I 9.90

99252 - Laboratory Animal Caretaker II 10.80 99310 - Mortician 25.86 99410 - Pest Controller 16.64 99510 - Photofinishing Worker 13.32 99710 - Recycling Laborer 15.96 99711 - Recycling Specialist 18.07 99730 - Refuse Collector 13.99 99810 - Sales Clerk 11.95 99820 - School Crossing Guard 11.85 99830 - Survey Party Chief 20.27 99831 - Surveying Aide 13.74 99832 - Surveying Technician 18.43 99840 - Vending Machine Attendant 11.52 99841 - Vending Machine Repairer 14.81 99842 - Vending Machine Repairer Helper 11.13

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 5 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year, New Year's Day, Martin Luther King Jr's Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees.