B.08.02 Solicitation - Lab Testing 18 Sep 23.pdf

SEE ADDENDUM

(No Collect Calls)

W912DR23R0034 15-Sep-2023

b. TELEPHONE NUMBER 8. OFFER DUE DATE/LOCAL TIME

02:00 PM 15 Oct 2023

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912DR9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

TRAHON D BATTLE

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

USACE, BALTIMORE

2 HOPKINS PLAZA

BALTIMORE MD 21201

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

PLANT OPERATIONS BRANCH

MICHAEL CHICOINE

5900 MACARTHUR BLVD NW

WASHINGTON DC 20315-0220

TEL: 202-764-0047 FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$16,500,000

NAICS:

541380

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF101

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES MAX

QUANTITY

UNIT UNIT PRICE MAX AMOUNT

0001 1 Each Year 1 EPA Lab Testing Service

FFP

The contractor shall perform services and include labor for laboratory analytical tests and preparation of test reports on samples for all parameters listed in Appendix A of the enclosed Performance Work Statement.

FOB: Destination

PSC CD: 6640

MAX

NET AMT

UNIT UNIT PRICE MAX AMOUNT

1001 1 Each Year 2 EPA Lab Testing Service

FFP

UNIT UNIT PRICE MAX AMOUNT

2001 1 Each Year 3 EPA Lab Testing Service

UNIT UNIT PRICE MAX AMOUNT

3001 1 Each Year 4 EPA Lab Testing Service

UNIT UNIT PRICE MAX AMOUNT

4001 1 Each Year 5 EPA Lab Testing Service

UNIT UNIT PRICE MAX AMOUNT

5001 1 Each OPTION Optional Six-Month Period

FFP

Section C - Descriptions and Specifications

PERFORMANCE WORK STATEMENT

Performance Work Statement

For USACE BALTIMORE DISTRICT

WASHINGTON AQUEDUCT DIVISION

Contract Laboratory Water Sample

Testing Services

IDIQ Contract

Michael Chicoine (202-587-9139) michael.l.chicoine@usace.army.mil

W912DR23R0034

1. Introduction: The Washington Aqueduct (WA), a division of the Baltimore District United States Army Corps of Engineers, p roduces drinking water for over one million citizens living, working, and visiting in the District of Columbia, Arlington County, Virginia, and the City of Falls Church, Virginia, and its service area. WA has the responsibility to provide safe, reliable, cost-effective drinking water 24 hours a day, seven days a week. The Aqueduct is a federally-owned and operated public water supply agency that produces an average of 180 million gallons of water per day at two treatment plants located in the District of Columbia. All funding for operations, maintenance, and capital improvements comes from revenue generated by selling drinking water to the three jurisdictions.

The Washington Aqueduct is a critical infrastructure that operates two water treatment plants (WTPs), the Dalecarlia WTP and the McMillan WTP. Located at the Dalecarlia WTP is the WA Laboratory. The primary mission of the WA Laboratory is to provide quality analytical support services to the Washington Aqueduct and its wholesale customers in order to ensure the safety and quality of the drinking water according to the Environmental Protection Agency (EPA) Safe Drinking Water Act (SDWA). The WA Laboratory also provides support services to both WA WTPs for monitoring compliance according to numerous National Pollutant Discharge Elimination System (NPDES) permit requirements under the Clean Water Act (CWA). As a service, the WA Laboratory performs legally-required drinking water compliance testing in accordance with local, state, and federal statutes. Extensive testing includes various chemical, biological, radiological, and other required parameters. The Washington Aqueduct Laboratory routinely analyzes process control, customer compliance, and research water samples. Occasionally, emergency water sample testing is required. In accordance with its mission, the Washington Aqueduct Laboratory is required to maintain a continuous state of readiness for water sample analysis. Any testing not performed in-house is sub-contracted off-site to a commercial laboratory. These services will bolster the capability, resiliency, and redundancy of the Washington Aqueduct’s water quality monitoring program.

2. Background: This contract is for an Indefinite Delivery Indefinite Quantity (IDIQ). The services rendered shall be to perform testing for various chemical, biological, radiological, and other parameters for the purpose of supporting the WA Laboratory’s mission of monitoring the quality and safety of the drinking water while complying with all federal and regional EPA and the Commonwealth of Virginia drinking water regulations. Additional services rendered shall be to perform various testing parameters for the purpose of supporting various NPDES permit requirements with the District of Columbia, EPA Region 3, and the state of Maryland. The contractor shall provide labor, analytical testing, equipment, materials, tools, supervision and all other items incidental to and required to provide laboratory testing services to the Washington Aqueduct. The Washington Aqueduct will be responsible for collecting samples and shipping them to the contracted laboratory. All testing performed by the contractor shall be performed offsite.

All testing services performed shall conform to all regulations associated with the Safe Drinking Water Act (SDWA), National Pollutant Discharge Elimination System (NPDES), Clean Water Act (CWA) or other state and/or federally mandated requirements and use Environmental Protection Agency (EPA) approved test methods or alternative methods specified in this Performance Work Statement (PWS).

3. General Requirements: Services shall include laboratory analytical tests and preparation of test reports on samples for all parameters listed in Appendix A of this PWS (at a minimum) including:

Analysis of SDWA-regulated and unregulated parameters as they apply to drinking water compliance testing for the District of Columbia, EPA Region 3, and the Commonwealth of Virginia, routine water quality and process control testing, research testing, and emergency response testing.

Analysis of CWA-regulated and unregulated parameters as they apply to NPDES testing for the District of Columbia, EPA Region 3, and the state of Maryland.

All additional analytical testing performed by the contract laboratory not included in Appendix A.

Provide all materials, supplies, and appurtenances needed to collect, transport, and deliver water samples to the contracted laboratory.

Provide a secure website which the Washington Aqueduct can access to view recent and historical laboratory reports.

Technical personnel to answer and provide assistance regarding EPA drinking water regulatory requirements as they pertain to laboratory testing.

3.1 Capabilities. The commercial laboratory shall have a primary focus on supporting the drinking water community in the area of compliance testing using certified methods, as well as, the areas of pilot-project and research testing of both common and emerging contaminants using both established methods with appropriate modifications and recently-developed methods. The commercial laboratory shall have the capacity and capabilities to meet the needs for quick turnaround reporting of quality testing performed on high volumes of samples. It is also imperative that the laboratory not perform analyses on soil and waste matrices which are incompatible with the potable water matrix. The laboratory is required to maintain state-of-science current technology on all analytical equipment, sample collection, sample preparation, information management, and communications necessary to perform the services under this contract and should be able to adapt to all future analytical needs and requirements of the water supply industry. Upon request, the laboratory is required to provide a current copy of the Quality Assurance Plan (QAP) and Standard Operating Procedures (SOP) that are employed to perform the requested tests.

3.2 Subcontracting Tests. For all analyses performed on drinking water samples using drinking water methods, no less than 85% of the work performed by the laboratory (at their location) shall be on potable drinking water, bottled water, and surface water. No more than 15% of the tests provided under this contract may be subcontracted. However, this requirement does not apply to any analyses performed using wastewater, RCRA, or other non-drinking water methods. Any and all analyses performed using non-drinking water methods may be sub-contracted.

All subcontractors are required to meet all of the same certifications, approvals, and requirements as stated in this PWS. The laboratory is required to submit copies of all certificates for its subcontractors as referenced in Section 4.1.

The laboratory shall be held fully responsible and liable for the performance and quality of service provided by all subcontract laboratories it uses under this contract.

3.3 Analytical Methods. Appendix A contains the preferred list of SDWA-approved methods (where applicable) for the requested parameters. Only the most currently approved version of SDWA-published methods may be used for analyzing all SDWA-compliance samples. Some CWA-approved and RCRA methods are also included in Appendix A. All analyses performed and reported shall be compliant with all current SDWA and CWA Minimum Detectable Limits (MDLs) and Minimum Reporting Levels (MRLs) for all EPA-approved analytical methods as required by EPA SDWA and CWA regulations. The MRL requirements for the analytes and compounds of interest are also included in Appendix A. The laboratory can propose alternative SDWA and/or CWA-approved methods as long as the MRLs are met for all the target analytes and compounds shown. Please note, some of the compounds listed do not have a Required MRL listed. All deviations from the requirements listed in this sub-section 3.3 shall be summarized in the laboratory proposal.

3.4 Quality Control. All quality control elements as required by the method and the EPA SDWA and CWA shall be performed and reported by the contractor. In addition, matrix spikes and matrix spike duplicates may be performed on Washington Aqueduct samples (as designated by the Government POC).

3.5 Experience. The laboratory is required to have demonstrated experience with all currently certified parameters, including at least 2 years of documented certification and analysis of at least 500 SDWA samples for each test in Appendix A during the prior two years. Deviations from these requirements shall be summarized in the laboratory proposal.

3.6 Sampling Kits. The Contractor shall provide sample collection kits consisting of appropriate sample containers, filters, packaging materials, ice packs, laboratory chain of custody documents, comprehensive sampling instructions and shipping containers for each sample collection event.

The Government POC will send a sampling schedule to the Contractor on an annual or more frequent basis. A minimum of one sample will be scheduled to be tested per year.

Sample kits shall be provided on a monthly basis for the number of samples and parameters indicated in the sampling schedule.

Kits shall be shipped to arrive no later than the fifth (5th) of the month in which the samples are scheduled to be collected.

If issues are encountered outside of the Government’s control requiring resampling, the Contractor shall ship a replacement sampling kit at no additional cost.

3.7 Expedited Analysis. The Contractor shall provide the following rush analysis services when requested. The Contractor shall notify the Washington Aqueduct's primary and secondary contact persons of the test results, by telephone or e-mail, as soon as it becomes available or before the close of the following business day.

Rush analysis requested to be completed within seven (7) calendar days after the Contractor receives the samples at its laboratory shall be priced at no more than 150% of the respective standard price bid unless otherwise approved.

Rush analysis requested to be completed within two (2) calendar days after the Contractor receives the samples at its laboratory shall be priced at no more than 200% of the respective standard price bid unless otherwise approved.

3.8 Reporting, Record Keeping, and Data Retention. The laboratory shall provide a written report of the test results, chains of custody, and all required quality control and assurance test results within 21 calendar days of sample receipt.

Quality Control (QC) data shall include, but not limited to, the results for associated Method

Blanks (MB or LRB), Calibration Verifications, Laboratory Control Samples (LCS or LFB), Matrix Spike (MS or LFM), Matrix Spike Duplicate (MSD or LFMD), Ongoing Precision and Recovery (OPR), sample duplicates, MRL checks, surrogates (when applicable), and any other QA/QC requirements specified by the method.

The quality control limits shall meet method and SDWA (or CWA as applicable) requirements and shall be included for each QC parameter. Any QC results outside of the control limits shall be documented in the laboratory narrative and/or report.

The following information shall be reported for Cryptosporidium and Giardia analyses via EPA Method 1623:

Monitoring sample identification information Monitoring sample result (oocysts or cysts per L) Laboratory quality control batch associated with sample ID number and result for Ongoing Precision and Recovery (OPR) for associated QC batch ID number and result for Method Blank for associated QC batch LT2 sample collection form initiated by Washington Aqueduct and completed by laboratory with sample receipt information EPA Method 1623 bench sheet for field and MS samples EPA Method 1623 Cryptosporidium and Giardia slide examination form Laboratory comments and applicable data qualifiers

Written reports shall be e-mailed in .pdf format and/or provided on a secure website.

The laboratory shall also provide Electronic Data Deliverables (EDDs) for all analyses. Electronic reports shall be in a delimited format (eg, Excel) for importing into the Washington Aqueduct Laboratory Information Management System (LIMS) and other EPA and State SDWA or CWA databases (eg, Central Data Exchange (CDX), Safe Drinking Water Information System (SDWIS), Compliance Monitoring Data Portal (CMDP), Discharge Monitoring Report System (NetDMR)).

The laboratory shall maintain raw data and other records of all analyses performed for the

Washington Aqueduct for a period of no less than ten (10) years. Electronic copies of historical data records shall be made available to the Washington Aqueduct upon request at no additional cost.

3.9 Client Support Services. The following client support services shall be provided as part of the analytical services:

The laboratory is required to possess expert knowledge of Federal and State drinking water and clean water regulations.

The laboratory is required to receive and accept samples shipped from Washington

Aqueduct by overnight courier to be delivered to the laboratory by 10:30 AM on all days of the week except Sunday.

The laboratory shall have sufficient staff and instrumentation to analyze samples that have short sample holding times.

The laboratory shall provide a toll-free telephone number and designated primary contact person(s) for the Washington Aqueduct to call for services.

The laboratory shall provide a secure website which the Washington Aqueduct can access to view current and historical laboratory reports.

The laboratory shall immediately notify the Washington Aqueduct of all unanticipated positive, confirmed results by telephone or e-mail.

The laboratory shall maintain an individual who will be the primary contact with the

Washington Aqueduct to accept sample bottle orders, and also shall provide other related drinking and waste water testing information and/or consultative support, including regulatory updates no less frequently than quarterly. Information requests can also include but not be limited to data interpretation, regulations, environment, toxicology, and other related subject matters. The background of the assigned project manager and resource person shall be included with the proposal to demonstrate adequate qualifications. The mechanism by which the Contractor provides periodic regulatory information to the Washington Aqueduct shall be documented in the quote.

3.10 Other Requirements. The contractor shall agree that it has read and fully understands the requirements specified; is in compliance with, and responsible for all federal, state and local laws, ordinances and regulations pertaining to the services, equipment used in the services, or which in any way affects the conduct of the services; and no plea of misunderstanding will be considered on account of ignorance or of being uninformed thereof.

The contractor shall not disclose, imply nor reveal any data, test results or the contents of discussions it had or is having with the Washington Aqueduct, in whole or in part without the expressed written consent of the Washington Aqueduct.

The contractor unconditionally guarantees client confidentiality and certifies that the proposal is genuine and is not made in the interest of or on behalf of any undisclosed person, firm, or corporation and is not submitted in conformity with any agreement or rule of any group, association, organization or corporation.

Work under this task order is:

X UNCLASSIFIED

SECRET

TOP SECRET

3.11 Non-Personal Services. Contractor employees performing services under this order shall be controlled, directed and supervised at all times by management personnel of the contractor.

The contractor’s management shall ensure that employees properly comply with the performance standards outlined in the Quality Assurance Surveillance Plan (QASP).

Contractor employees shall perform independent of and without the supervision of any Government official. Actions of contractor employees may not be interpreted or implemented in any manner that results in any contractor employee creating or modifying Federal policy, obligating the appropriated funds of the U.S. Government, overseeing the work of Federal employees, providing direct personal services to any Federal employee or otherwise violating the prohibitions set forth in Parts 7.5 and 37.1 of the Federal Acquisition Regulation (FAR).

3.12 Period of Performance. The period of performance will be five years from award date plus one

6-month option period.

3.13 Security Requirements. The security requirements described below apply to all contract personnel (including employees of the prime Contractor (“Contractor”) and all subcontractor employees) supporting the performance requirements of this contract. The contractor is responsible for compliance with these security requirements. Questions regarding security matters shall be addressed to the designated Government representative (e.g., Contracting Officer Representative (COR), Requiring Activity (RA) representative, or Contracting Officer (if a COR or other RA representative is not appointed)). Contract personnel are critical to the overall security and safety of US Army Corps of Engineers (USACE) installations, facilities and activities, and security awareness training contributes to those efforts. The Department of Defense (DoD) and Army security training requirements specified below, if applicable, are performance requirements; all applicable contract personnel shall complete initial training within 30 days of contract award or the date new contract personnel begin performance on the contract. Within five business days from the completion of training, the Contractor shall provide written documentation (e.g., email or memorandum) to the Government representative. The documentation shall include the names of contract personnel trained and which training they completed; the Contractor shall maintain training records as part of their contract files and be prepared to provide copies of training certificates to the Government representative. Contractor personnel and vehicles are subject to search when entering federal installations. Additionally, all contract personnel shall comply with Force Protection Condition (FPCON) measures, Random Antiterrorism Measures (commonly referred to as “RAMs”), and Health Protection Condition (HPCON) measures. The Contractor is responsible for meeting performance requirements during elevated FPCON and/or HPCON levels in accordance with applicable RA plans and procedures – this includes identifying mission essential and non-mission essential personnel. In addition to the changes otherwise authorized by the changes clause of this contract, should the FPCON or HPCON levels at any individual facility or installation change, the Government may implement security changes that affect contract personnel. The Contractor shall ensure all contract personnel are aware of their security responsibilities, including any site-specific requirements identified in local policies or procedures.

All contract personnel requiring routine access to Army installations, facilities, and controlled access areas, or requiring network access shall complete initial and annual refresher AT Level I awareness training. Online AT Level I awareness training is available at https://jko.jten.mil/ (website subject to change).

All contract personnel requiring physical access to a federal installation or facility shall comply with the access control procedures of that location. Contract personnel requiring unescorted access to meet contract performance requirements on a DoD installation in the US shall be vetted by the installation/facility Provost Marshal/Directorate of Emergency Services/Security Office using the National Crime Information Center-Interstate Identification Index (commonly referred to as “NCIC-III”) and Terrorist Screening Database (commonly referred to as “TSDB”).

Contract personnel who do not meet requirements for unescorted access to USACE facilities shall coordinate escorted access with the Government representative, as needed. Contract personnel who receive keys, access cards, or lock combinations that provide access to government-owned property shall comply with key and lock control procedures of the RA.

Contractors shall comply with the requirements set forth in FAR clause 52.222.-54 Employment

Eligibility Verification and FAR Subpart 22.18 in using the E-Verify Program at (https://www.e-verify.gov/) (website subject to charge) to meet the contract employment eligibility requirements. Contractors are encouraged to cooperate with Federal and State agencies responsible for enforcing labor requirements to include eligibility for employment under United States immigration laws in accordance with FAR 22.102-1(i). An initial list of verified/eligible candidates shall be provided to the COR no later than three business days after the initial contract award. When contracts are with individuals, the individuals will be required to complete a Form I-9, Employment Eligibility Verification, and submit it to the Contracting Officer to become part of the official contract file.

3.14 Location of Work Performance. Washington Aqueduct personnel will be responsible for collecting samples and shipping them (eg, either as bottles, filters, bulk cubitainers, etc.) to the contract laboratory. All work performed by the contractor shall be performed offsite at the contracted laboratory.

3.15 Site Points of Contact (POCs). POCs shall inspect all Services performed by the Contractor under this PWS through the final reports and provide feedback and acknowledgement of acceptance by customer of deliverables.

Government Technical Project Officer:

TBD

Additional Government POCs:

TBD

3.16 Delivery. Delivery of all materials will be coordinated with any of the listed Site POCs. Delivery will be made to the following physical address:

Washington Aqueduct Laboratory 5900 MacArthur Blvd, NW Washington, DC 20016-2514 Attn: Robert Hoffa

3.17 Invoicing instructions:

The Supplier shall mail the original delivery invoices to:

USACE Finance Center 5722 Integrity Drive Millington, TN 38054-5005 Attn: EFT/Disbursing

And a copy to:

Washington Aqueduct 5900 MacArthur Blvd., N.W.

Washington, D.C. 2 0016-2514 Attn: Support Management Services

Email: WADinvoices@usace.army.mil

3.18 Minimum Guarantee

The minimum guarantee is $3000.

4. Performance Requirements:

4.1 Contract Laboratory Certification Requirements. All laboratory analyses on SDWA and CWA compliance samples shall be performed by the Contractor using the most currently approved version of the approved published method available. Laboratories performing tests on SDWA and CWA samples under this contract shall be, and continuously be certified and/or approved for performing the most currently approved version of the published drinking water methods by the National Environmental Laboratory Accreditation Program (NELAP), the Commonwealth of Virginia drinking water program or Virginia Environmental Laboratory Accreditation Program (VELAP), and any other State drinking water programs (if applicable), EPA Unregulated Contaminant Monitoring Rules (UCMR), and the EPA SDWA Cryptosporidium laboratory Quality Assurance approval program [40 CFR Part 141.705(a)] while performing work under this contract for those parameters for which certification and/or EPA-approval is available. The contracted laboratory shall be included on the EPA list of “Cryptosporidium Laboratories Acceptable for Monitoring to Comply with the Long Term 2 (LT2) Enhanced Surface Water Treatment Rule” (EPA Office of Water (MC 140) EPA 815-B-13-002).

The laboratory shall continuously maintain certification and approval throughout the entire duration of the contract. The laboratory is required to have demonstrated experience with all currently certified/approved method parameters in this PWS. It is understood by all parties that the Washington Aqueduct has the option and right to terminate the contract because of any loss of certification.

Copies of updated laboratory certification and approval documents shall be submitted to the

Government Technical Project Officer on an annual basis during the performance of the contract period.

The laboratory is required to ensure all equipment, instrumentation, and personnel qualifications meets or exceeds NELAP, VELAP, and EPA standards necessary to perform the services under this contract.

4.2 Proficiency Testing (PT). While the laboratory is under contract with the Washington Aqueduct, any PT study showing less than 90% satisfactory shall be reported to the Washington Aqueduct within 24 hours of the laboratory receiving the results. In the event such results are received, the laboratory shall perform appropriate corrective action within the required time period to maintain certification with their regulatory agency. It is understood by all parties that the Washington Aqueduct has the option and right to terminate the contract if the laboratory fails to correct PT failures to the satisfaction of Washington Aqueduct. If the laboratory fails two successive PT samples and/or its certification is revoked, the laboratory shall identify all affected analyses and arrange for the collection and submittal of a new set of samples for re-analysis at another certified laboratory at no additional cost to the Washington Aqueduct.

All PT studies for all parameters under this contract showing results outside the required acceptance limits for LT2 certification/approval and NELAP certification shall be reported to the Washington Aqueduct within three (3) business days of the laboratory receiving the results. In the event such results are received, the laboratory shall obtain another PT sample from a provider as soon as one is available. The results of the repeat analysis shall again be reported to the Washington Aqueduct within three (3) business days of receiving the result. If the results of the reanalysis are again outside the required acceptance limits, the Washington Aqueduct has the option to discontinue sending samples to the laboratory. During this period, the Contractor shall arrange for the submittal of samples to another certified/approved laboratory at no additional cost to the Washington Aqueduct.

4.3 Analytical Method Reporting and Performance. All analytical performance and reporting shall be compliant with the associated method, EPA SDWA, VELAP, and NELAP requirements. In the event that the samples provided to the Contractor do not meet these requirements upon arrival (eg, holding times, sample volumes, temperature, sample integrity, etc) or during analysis (eg, QC data outside of established limits), the Contractor shall notify the Washington Aqueduct by phone or email within one (1) business day in order to schedule resampling if required.

4.4 Additional Document Requirements for Proposal. When the quote is submitted, the Offeror shall provide the following supporting documents:

Current, unexpired copies of their certification/approval letters from EPA, VELAP, and a State drinking water program and/or NELAP, as well as, copies of certifications/approvals covering the last two (2) years.

Listing/brief description of three (3) successfully completed projects of similar relevancy, scope, and certification/approval requirements within the last two (2) years.

Listing of methods and current MRLs comparable to those in Appendix A.

Resumes of key personnel with documented training and experience in the methods listed in

Appendix A covering the last two (2) years.

Most recent Proficiency Testing (PT) results for all applicable methods listed in Appendix A.

The laboratory shall submit a cost proposal for each line item in Appendix A, irrespective of whether the tests are done by the laboratory or by a subcontractor. Tests performed in-house shall be identified.

5. Technical Exhibit List:

5.1 Performance Requirements Summary

Performance Objective

Standard

Performance Threshold

Method of Surveillance

PRS # 1.

The Contractor shall provide and ship sample collection kits to arrive at the Washington Aqueduct by the fifth (5th) of the month in which the samples are scheduled to be collected. If issues are encountered outside of the Government’s control requiring resampling, the Contractor shall ship a replacement sampling kit at no additional cost.

The Contractor provides all required sampling supplies in the sample collection kit by the fifth (5th) of the month.

All sampling supplies shall arrive prior to the scheduled sample collection date.

100 percent inspection performed by site POCs.

PRS # 2.

The Contractor shall analyze all samples according to the associated method, EPA SDWA, EPA CWA, and NELAP procedural and quality control requirements.

The Contractor follows all regulatory, certification, and method requirements.

Notifies Washington Aqueduct of all issues requiring resampling within one (1) business day.

The Contractor shall reanalyze all samples at no cost to the Government for all problems and QC failures caused by contract laboratory error.

PRS # 3

The Contractor shall continuously be certified and/or approved for performing drinking water analysis by NELAP, the State of Virginia drinking water program and any other State drinking water programs (if applicable), EPA Unregulated Contaminant Monitoring Rules (UCMR), and the EPA SDWA Cryptosporidium laboratory Quality Assurance approval program. Also continue to be included on the EPA list of “Cryptosporidium Laboratories Acceptable for Monitoring to Comply with the Long Term 2 Enhanced Surface Water Treatment Rule”.

The Contractor maintains all required certifications and approvals. Copies of updated certification and approval documents shall be submitted to the Government Technical Point of Contact (POC) on an annual basis during the performance of each contract period.

The Contractor shall maintain the required certifications and approvals during the entire performance of the contract or samples shall be subcontracted to a certified/approved laboratory.

PRS # 4

The Contractor shall provide a written and electronic report (including all method-required sample and batch-specific quality control results obtained during the processing and analysis of submitted samples).

The Contractor provides a written report (including all required elements listed in the PWS) within 21 calendar days from sample receipt.

The report shall contain all of the required elements listed in the PWS and shall be received within 21 calendar days from sample receipt.

Appendix A Analytical Capability Requirements

Analyte or Compound Method Required

MRL

Units

Volatile Organic Compounds by GC/MS:

1,1,1,2-Tetrachloroethane EPA 524.2 0.5 μg/L 1,1,1-Trichloroethane EPA 524.2 0.5 μg/L 1,1,2,2-Tetrachloroethane EPA 524.2 0.5 μg/L 1,1,2-Trichloroethane EPA 524.2 0.5 μg/L 1,1-Dichloroethane EPA 524.2 0.5 μg/L 1,1-Dichloroethylene EPA 524.2 0.5 μg/L 1,1-Dichloropropene EPA 524.2 0.5 μg/L 1,2,3-Trichlorobenzene EPA 524.2 0.5 μg/L 1,2,3-Trichloropropane EPA 524.2 0.5 μg/L 1,2,4-Trichlorobenzene EPA 524.2 0.5 μg/L 1,2,4-Trimethylbenzene EPA 524.2 0.5 μg/L o-Dichlorobenzene (1,2-DCB) EPA 524.2 0.5 μg/L 1,2-Dichloroethane EPA 524.2 0.5 μg/L 1,2-Dichloropropane EPA 524.2 0.5 μg/L 1,3,5-Trimethylbenzene EPA 524.2 0.5 μg/L m-Dichlorobenzene (1,3-DCB) EPA 524.2 0.5 μg/L 1,3-Dichloropropane EPA 524.2 0.5 μg/L p-Dichlorobenzene (1,4-DCB) EPA 524.2 0.5 μg/L 2,2-Dichloropropane EPA 524.2 0.5 μg/L 2-Butanone (MEK) EPA 524.2 5 μg/L 4-Methyl-2-Pentanone (MIBK) EPA 524.2 5 μg/L o-Chlorotoluene EPA 524.2 0.5 μg/L p-Chlorotoluene EPA 524.2 0.5 μg/L p-Isopropyltoluene EPA 524.2 0.5 μg/L Benzene EPA 524.2 0.5 μg/L Bromobenzene EPA 524.2 0.5 μg/L Bromochloromethane EPA 524.2 0.5 μg/L Bromodichloromethane EPA 524.2 0.5 μg/L Bromoethane EPA 524.2 0.5 μg/L Bromoform EPA 524.2 0.5 μg/L Bromomethane (Methyl Bromide) EPA 524.2 0.5 μg/L Carbon disulfide EPA 524.2 0.5 μg/L Carbon Tetrachloride EPA 524.2 0.5 μg/L Chlorobenzene EPA 524.2 0.5 μg/L Chloroethane EPA 524.2 0.5 μg/L Chloroform (Trichloromethane) EPA 524.2 0.5 μg/L Chloromethane(Methyl Chloride) EPA 524.2 0.5 μg/L cis-1,2-Dichloroethylene EPA 524.2 0.5 μg/L cis-1,3-Dichloropropene EPA 524.2 0.5 μg/L Chlorodibromomethane EPA 524.2 0.5 μg/L Dibromomethane EPA 524.2 0.5 μg/L Di-isopropyl ether EPA 524.2 3 μg/L Dichlorodifluoromethane EPA 524.2 0.5 μg/L Ethyl benzene EPA 524.2 0.5 μg/L Hexachlorobutadiene EPA 524.2 0.5 μg/L Isopropylbenzene EPA 524.2 0.5 μg/L m,p-Xylenes EPA 524.2 0.5 μg/L Methyl Tert-butyl ether (MTBE) EPA 524.2 0.5 μg/L Dichloromethane EPA 524.2 0.5 μg/L Naphthalene EPA 524.2 0.5 μg/L n-Butylbenzene EPA 524.2 0.5 μg/L n-Propylbenzene EPA 524.2 0.5 μg/L o-Xylene EPA 524.2 0.5 μg/L sec-Butylbenzene EPA 524.2 0.5 μg/L Styrene EPA 524.2 0.5 μg/L tert-amyl Methyl Ether EPA 524.2 3 μg/L tert-Butyl Ethyl Ether EPA 524.2 3 μg/L tert-Butylbenzene EPA 524.2 0.5 μg/L Tetrachloroethylene (PCE) EPA 524.2 0.5 μg/L

Analyte or Compound Method Required

MRL

Units

Volatile Organic Compounds by GC/MS (continued):

Toluene EPA 524.2 0.5 μg/L Total 1,3-Dichloropropene EPA 524.2 0.5 μg/L Total THM EPA 524.2 0.5 μg/L Total xylenes EPA 524.2 0.5 μg/L trans-1,2-Dichloroethylene EPA 524.2 0.5 μg/L trans-1,3-Dichloropropene EPA 524.2 0.5 μg/L Trichloroethylene (TCE) EPA 524.2 0.5 μg/L Trichlorofluoromethane EPA 524.2 0.5 μg/L Trichlorotrifluoroethane(Freon 113) EPA 524.2 0.5 μg/L Vinyl chloride (VC) EPA 524.2 0.3 μg/L Tetrachloroethylene (PCE) EPA 524.2 0.5 μg/L

SOCs by GC/MS:

2,4-DDD EPA 525.2 0.1 μg/L 2,4-DDE EPA 525.2 0.1 μg/L 2,4-DDT EPA 525.2 0.1 μg/L 2,4-Dinitrotoluene EPA 525.2 0.1 μg/L 2,6-Dinitrotoluene EPA 525.2 0.1 μg/L 4,4-DDD EPA 525.2 0.1 μg/L 4,4-DDE EPA 525.2 0.1 μg/L 4,4-DDT EPA 525.2 0.1 μg/L Acenaphthene EPA 525.2 0.1 μg/L Acenaphthylene EPA 525.2 0.1 μg/L Acetochlor EPA 525.2 0.1 μg/L Alachlor EPA 525.2 0.05 μg/L Alpha-BHC EPA 525.2 0.1 μg/L alpha-Chlordane EPA 525.2 0.05 μg/L Anthracene EPA 525.2 0.02 μg/L Atrazine EPA 525.2 0.05 μg/L Benz(a)Anthracene EPA 525.2 0.05 μg/L Benzo(a)pyrene EPA 525.2 0.02 μg/L Benzo(b)Fluoranthene EPA 525.2 0.02 μg/L Benzo(g,h,i)Perylene EPA 525.2 0.05 μg/L Benzo(k)Fluoranthene EPA 525.2 0.02 μg/L Beta-BHC EPA 525.2 0.1 μg/L Bromacil EPA 525.2 0.2 μg/L Butachlor EPA 525.2 0.05 μg/L Butylbenzylphthalate EPA 525.2 0.5 μg/L Caffeine EPA 525.2 0.05 μg/L Chlorobenzilate EPA 525.2 0.1 μg/L Chloroneb EPA 525.2 0.1 μg/L Chlorothalonil(Draconil,Bravo) EPA 525.2 0.1 μg/L Chlorpyrifos (Dursban) EPA 525.2 0.05 μg/L Chrysene EPA 525.2 0.02 μg/L Delta-BHC EPA 525.2 0.1 μg/L Di-(2-Ethylhexyl)adipate EPA 525.2 0.6 μg/L Di(2-Ethylhexyl)phthalate EPA 525.2 0.6 μg/L Diazinon (Qualitative) EPA 525.2 0.1 μg/L

Dibenz(a,h)Anthracene EPA 525.2 0.05 μg/L Dichlorvos (DDVP) EPA 525.2 0.05 μg/L Dieldrin EPA 525.2 0.2 μg/L Diethylphthalate EPA 525.2 0.5 μg/L Dimethoate EPA 525.2 0.1 μg/L Dimethylphthalate EPA 525.2 0.5 μg/L Di-n-Butylphthalate EPA 525.2 1 μg/L Di-N-octylphthalate EPA 525.2 0.1 μg/L Endosulfan I (Alpha) EPA 525.2 0.1 μg/L Endosulfan II (Beta) EPA 525.2 0.1 μg/L Endosulfan Sulfate EPA 525.2 0.1 μg/L Endrin EPA 525.2 0.1 μg/L

Endrin Aldehyde EPA 525.2 0.1 μg/L EPTC EPA 525.2 0.1 μg/L

Analyte or Compound Method Required

MRL

Units

SOCs by GC/MS (continued):

Fluoranthene EPA 525.2 0.1 μg/L Fluorene EPA 525.2 0.05 μg/L gamma-Chlordane EPA 525.2 0.05 μg/L Heptachlor EPA 525.2 0.04 μg/L Heptachlor Epoxide (isomer B) EPA 525.2 0.05 μg/L Hexachlorobenzene EPA 525.2 0.05 μg/L Hexachlorocyclopentadiene EPA 525.2 0.05 μg/L Indeno(1,2,3,c,d)Pyrene EPA 525.2 0.05 μg/L Isophorone EPA 525.2 0.5 μg/L Lindane EPA 525.2 0.04 μg/L Malathion EPA 525.2 0.1 μg/L Methoxychlor EPA 525.2 0.1 μg/L Metolachlor EPA 525.2 0.05 μg/L Metribuzin EPA 525.2 0.05 μg/L Molinate EPA 525.2 0.1 μg/L Naphthalene EPA 525.2 0.3 μg/L Parathion EPA 525.2 0.1 μg/L Pendimethalin EPA 525.2 0.1 μg/L Total Permethrin (mixed isomers) EPA 525.2 0.1 μg/L Phenanthrene EPA 525.2 0.04 μg/L Propachlor EPA 525.2 0.05 μg/L Pyrene EPA 525.2 0.05 μg/L Simazine EPA 525.2 0.05 μg/L Terbacil EPA 525.2 0.1 μg/L Terbuthylazine EPA 525.2 0.1 μg/L Thiobencarb EPA 525.2 0.2 μg/L trans-Nonachlor EPA 525.2 0.05 μg/L Trifluralin EPA 525.2 0.1 μg/L Endrin Aldehyde EPA 525.2 0.1 μg/L

Organochlorine Pesticides by GC/ECD:

Alachlor (Alanex) EPA 505 0.1 μg/L Aldrin EPA 505 0.01 μg/L Chlordane EPA 505 0.1 μg/L Dieldrin EPA 505 0.01 μg/L Endrin EPA 505 0.01 μg/L Heptachlor EPA 505 0.01 μg/L Heptachlor Epoxide EPA 505 0.01 μg/L Lindane (gamma-BHC) EPA 505 0.01 μg/L Methoxychlor EPA 505 0.05 μg/L PCB 1016 Aroclor (qualitative)* EPA 505 0.08 μg/L PCB 1221 Aroclor (qualitative)* EPA 505 0.1 μg/L

PCB 1232 Aroclor (qualitative)* EPA 505 0.1 μg/L PCB 1242 Aroclor (qualitative)* EPA 505 0.1 μg/L PCB 1248 Aroclor (qualitative)* EPA 505 0.1 μg/L PCB 1254 Aroclor (qualitative)* EPA 505 0.1 μg/L PCB 1260 Aroclor (qualitative)* EPA 505 0.1 μg/L Total PCBs* EPA 505 0.1 μg/L Toxaphene EPA 505 0.5 μg/L

PCBs as Decachlorobiphenyls by GC/ECD:

PCBs (quantitative) EPA 508A 0.1 μg/L

*If PCBs (as one of seven Aroclors) are detected as designated in any sample analyzed using Method 505 or 508, the laboratory shall reanalyze the sample using Method 508A to quantitate PCBs (as decachlorobiphenyl).

Chlorophenoxy Herbicides by GC/ECD:

2,4,5-T EPA 515.4 0.2 μg/L 2,4,5-TP (Silvex) EPA 515.4 0.2 μg/L 2,4-D EPA 515.4 0.1 μg/L 2,4-DB EPA 515.4 2 μg/L 3,5-Dichlorobenzoic acid EPA 515.4 0.5 μg/L

Analyte or Compound Method Required

MRL

Units

Chlorophenoxy Herbicides by GC/ECD (continued):

Acifluorfen EPA 515.4 0.2 μg/L Bentazon EPA 515.4 0.5 μg/L Dalapon EPA 515.4 1 μg/L Dicamba EPA 515.4 0.1 μg/L Dichlorprop EPA 515.4 0.5 μg/L Dinoseb EPA 515.4 0.2 μg/L Pentachlorophenol EPA 515.4 0.04 μg/L Picloram EPA 515.4 0.1 μg/L

Nitrosamines by GC/MS:

N-Nitrosodibutylamine (NDBA) EPA 521 2 ng/L N-Nitrosodiethylamine (NDEA) EPA 521 2 ng/L N-Nitroso-dimethylamine (NDMA) EPA 521 2 ng/L N-Nitrosodi-n-propylamine (NDPA) EPA 521 2 ng/L N-Nitrosomethylethylamine (NMEA) EPA 521 2 ng/L N-Nitrosopyrollidine (NPYR) EPA 521 2 ng/L

Dioxane:

1,4-Dioxane EPA 522 1 ug/L

Carbamate Pesticides by HPLC:

1-Naphthol EPA 531.2 1 μg/L 3-Hydroxycarbofuran EPA 531.2 0.5 μg/L Aldicarb (Temik) EPA 531.2 0.5 μg/L Aldicarb sulfone EPA 531.2 0.7 μg/L Aldicarb sulfoxide EPA 531.2 0.5 μg/L Baygon EPA 531.2 0.5 μg/L Carbaryl EPA 531.2 0.5 μg/L Carbofuran (Furadan) EPA 531.2 0.9 μg/L Methiocarb EPA 531.2 1 μg/L Methomyl EPA 531.2 0.5 μg/L Oxamyl (Vydate) EPA 531.2 1 μg/L

Glyphosate:

Glyphosate EPA 547 6 μg/L

Endothall:

Endothall EPA 548.1 5 μg/L

Diquat and Paraquat:

Diquat EPA 549.2 0.4 μg/L Paraquat EPA 549.2 2 μg/L

EDB & DBCP:

1,2-Dibromo-3-chloropropane (DBCP) EPA 551.1 0.01 μg/L Ethylene dibromide (EDB) EPA 551.1 0.01 μg/L

Acrylamide:

Acrylamide EPA 8032A 0.05 ug/L

Epichlorohydrin:

Epichlorohydrin EPA 524.2 0.4 ug/L

Dioxin by HRGC/HRMS:

2,3,7,8-Tetrachloro dibenzo-p-dioxin EPA 1613B 5 pg/L

Taste and Odor Compounds:

Geosmin SM 6040 D 2 ng/L Methylisoborneol (MIB) SM 6040 D 2 ng/L 2,4,6-Trichloroanisole (TCA) SM 6040 D 2 ng/L 2-isobutyl-3-methoxy pyrazine (IBMP) SM 6040 D 2 ng/L 2-isopropyl-3-methoxy pyrazine (IPMP) SM 6040 D 2 ng/L

Analyte or Compound Method Required

MRL

Units

Phenylurea Pesticides/Herbicides:

Diflubenzuron EPA 532 NA ug/L Diuron EPA 532 NA ug/L Fluometuron EPA 532 NA ug/L Linuron EPA 532 NA ug/L Propanil EPA 532 NA ug/L Siduron EPA 532 NA ug/L Tebuthiuron EPA 532 NA ug/L Thidiazuron EPA 532 NA ug/L

Carbonyl Compounds:

Acetaldehyde EPA 556.1 1 ug/L Benzaldehyde EPA 556.1 1 ug/L Butanal EPA 556.1 1 ug/L Cyclohexanone EPA 556.1 1 ug/L Decanal EPA 556.1 1 ug/L Formaldehyde EPA 556.1 5 ug/L Glyoxal EPA 556.1 10 ug/L Heptanal EPA 556.1 1 ug/L Hexanal EPA 556.1 1 ug/L Methyl glyoxal EPA 556.1 10 ug/L Nonanal EPA 556.1 1 ug/L Octanal EPA 556.1 1 ug/L Pentanal EPA 556.1 1 ug/L Propanal EPA 556.1 1 ug/L

Haloacetic Acids (HAAs):

Monochloroacetic acid SM 6251 B 1 μg/L Dichloroacetic acid SM 6251 B 1 μg/L

Trichloroacetic acid SM 6251 B 1 μg/L Monobromoacetic acid SM 6251 B 1 μg/L Dibromoacetic acid SM 6251 B 1 μg/L Haloacetic Acids 5 Total SM 6251 B 1 μg/L Monochloroacetic acid EPA 552.3 2 μg/L Dichloroacetic acid EPA 552.3 0.2 μg/L Trichloroacetic acid EPA 552.3 0.5 μg/L Monobromoacetic acid EPA 552.3 0.3 μg/L Dibromoacetic acid EPA 552.3 0.3 μg/L Bromochloroacetic acid EPA 552.3 0.3 μg/L Bromodichloroacetic acid EPA 552.3 0.5 μg/L Chlorodibromoacetic acid EPA 552.3 0.3 μg/L Tribromoacetic acid EPA 552.3 2 μg/L Haloacetic Acids 9 Total EPA 552.3 0.2 μg/L

Inorganic Parameters:

Alkalinity SM 2320 B 2 mg/L Ammonia EPA 350.1 0.05 mg/L Asbestos EPA 100.2 0.2 MFL Biochemical Oxygen Demand SM 5210 B 2 mg/L Bromate EPA 317 1 mg/L Calcium Hardness SM 3500 Ca NA mg/L Chloride EPA 300.0 1 mg/L Chlorite EPA 300.0 10 μg/L Chemical Oxygen Demand EPA 410.4 15 mg/L Color SM 2120 B 3 ACU Corrosivity/Langlier Index SM 2330 B -14 units Cyanide, total** EPA 335.4 0.005 mg/L Cyanide,free SM 4500 CN F 0.025 mg/L Cyanide, amenable SM 4500 CN G 0.025 mg/L Fluoride SM 4500 F C 0.05 mg/L

**Whenever the measured concentration of total cyanide in a sample exceeds 0.2 mg/L, the laboratory shall reanalyze the sample for free cyanide using an SDWA-approved method in order to determine compliance with the EPA-established drinking water MCL.

MRL

Units

Inorganic Parameters (continued):

Hexavalent chromium (dissolved) EPA 218.7 0.02 μg/L Iodide EPA 200.8 1 μg/L Kjeldahl Nitrogen EPA 351.2 0.5 mg/L Mercury EPA 245.1 0.2 μg/L Nitrate as N EPA 300.0 0.1 mg/L Nitrite as N EPA 300.0 0.05 mg/L Odor (Threshold Odor Number) SM 2150 B 1 TON Orthophosphate EPA 365.1 0.05 mg/L Orthophosphorus SM 4500 P E 50 ug/L Total Phosphorus SM 4500 P E 50 ug/L Perchlorate EPA 331 0.05 μg/L Residue (Volatile) EPA 160.4 NA mg/L Residue (Total) SM 2540 B NA mg/L Residue (Filterable) SM 2540 C NA mg/L Residue (Non-filterable) SM 2540 D NA mg/L Silica SM4500 SiO2 C 1 mg/L Specific Conductance SM 2510 B 2 umho/cm Specific UV Absorbance (SUVA) SM 5910 B SM 0.009 AU Sulfate EPA 300.0 0.5 mg/L Surfactants as MBAS SM 5540 C 0.05 mg/L

Total Dissolved Solid (TDS) SM 2540 C 10 mg/L Total Hardness as CaCO3 SM 2340 B 3 mg/L Total Organic Halides SM 5320 B NA ug/L Turbidity EPA 180.1 0.05 NTU

Metals by ICP-MS:

Aluminum EPA 200.8 20 ug/L Antimony EPA 200.8 1 ug/L Arsenic (Total & Speciation) EPA 200.8 1 ug/L Barium EPA 200.8 2 ug/L Beryllium EPA 200.8 1 ug/L Cadmium EPA 200.8 0.5 ug/L Chromium EPA 200.8 1 ug/L Cobalt EPA 200.8 2 ug/L Copper EPA 200.8 2 ug/L Lead EPA 200.8 0.5 ug/L Manganese EPA 200.8 2 ug/L Mercury EPA 200.8 0.2 ug/L Molybdenum EPA 200.8 2 ug/L Nickel EPA 200.8 5 ug/L Selenium EPA 200.8 5 ug/L Silver EPA 200.8 0.5 ug/L Thallium EPA 200.8 1 ug/L Uranium EPA 200.8 0.2 ug/L Vanadium EPA 200.8 3 ug/L Zinc EPA 200.8 20 ug/L

Metals by ICP-AES:

Aluminum EPA 200.7 NA mg/L Barium EPA 200.7 NA mg/L Beryllium EPA 200.7 NA mg/L Boron EPA 200.7 NA mg/L Cadmium EPA 200.7 NA mg/L Calcium EPA 200.7 1 mg/L Chromium EPA 200.7 NA mg/L Copper EPA 200.7 NA mg/L Iron EPA 200.7 0.02 mg/L Magnesium EPA 200.7 0.1 mg/L Manganese EPA 200.7 NA mg/L Molybdenum EPA 200.7 NA mg/L

Analyte or Compound Method Required

MRL

Units

Metals by ICP-AES (continued):

Nickel EPA 200.7 NA mg/L Potassium EPA 200.7 NA mg/L Silica as SiO2 EPA 200.7 NA mg/L Silver EPA 200.7 NA mg/L Sodium EPA 200.7 1 mg/L Vanadium EPA 200.7 NA mg/L Zinc EPA 200.7 NA mg/L

Microbiological Parameters:

Water suitability ratio SM 9020 B NA NA Cryptosporidium EPA 1623 NA NA Giardia EPA 1623 NA NA Heterotrophic Plate Count SM 9215 B NA NA

Total Coliforms

SM 9221 B

LTB

NA NA

Total Coliforms

SM 9221 B

LTB+C MPN

NA NA

Total Coliforms

SM 9223 B

Colilert

NA NA

Total Coliforms SM 9223 B Quantitray NA NA

Total Coliforms

SM 9223 B

Colilert-18

NA NA

Total Coliforms SM 9223 B Quantitray-18 NA NA

Total Coliforms

SM 9223 B

Colisure

NA NA

Fecal Coliforms

SM 9221 B,E

LTB+EC

NA NA

Fecal Coliforms

SM 9221 B, E, C

LTB+EC MPN

NA NA

E.coli

SM 9221 B, F

LTB+EC MUG

NA NA

E.coli

SM 9221 B, F, C

LTB+EC MUG MPN

NA NA

E.coli

SM 9223 B

Colilert

NA NA

E.coli

SM 9223 B

Colilert Quantitray

NA NA

E.coli

SM 9223 B

Colilert-18

NA NA

E.coli

SM 9223 B

Colilert-18 Quantitray

NA NA

E.coli

SM 9223 B

Colisure

NA NA

Enterococci Enterolert NA NA Enterococci SM 9230 B NA NA Fecal streptococci SM 9230 B NA NA Algal ID/Enumeration SM 10200 F NA NA

Radiological Contaminants:

Gross alpha EPA 900.0 < 3 pCi/L Gross beta EPA 900.0 < 4 pCi/L Radium-226 GA Tech Ra-226/228 < 1 pCi/L Radium-228 GA Tech Ra-226/228 < 1 pCi/L Radon-222 SM 7500RN NA pCi/L Strontium-90 EPA 905.0 NA pCi/L Tritium EPA 906.0 NA pCi/L

UCMR5:

11-chloroeicosafluoro-3-oxaundecane-1-sulfonic acid (11Cl-PF3OUdS) EPA 533 0.005 μg/L 1H,1H, 2H, 2H-perfluorodecane sulfonic acid (8:2FTS) EPA 533 0.005 μg/L

Analyte or Compound Method Required

MRL

Units

UCMR5 (continued):

1H,1H, 2H, 2H-perfluorohexane sulfonic acid (4:2FTS) EPA 533 0.003 μg/L 1H,1H, 2H, 2H-perfluorooctane sulfonic acid (6:2FTS) EPA 533 0.005 μg/L 4,8-dioxa-3H-perfluorononanoic acid (ADONA) EPA 533 0.003 μg/L 9-chlorohexadecafluoro-3-oxanonane-1-sulfonic acid (9Cl-PF3ONS) EPA 533 0.002 μg/L hexafluoropropylene oxide dimer acid (HFPO-DA)(GenX) EPA 533 0.005 μg/L nonafluoro-3,6-dioxaheptanoic acid (NFDHA) EPA 533 0.02 μg/L perfluoro (2-ethoxyethane) sulfonic acid (PFEESA) EPA 533 0.003 μg/L perfluoro-3-methoxypropanoic acid (PFMPA) EPA 533 0.004 μg/L…