B.01.01_Combined_Synopsis.pdf

PDF 939 KB Posted

Attached to
Kanopolis Lake Janitorial
Solicitation number
W912DQ-19-T-1003
Issued by

About this file

Form

View the file

Other files

File Type Posted
A.07.23_Related_Experience_Form.pdf PDF
A.07.23_Past_Performance_Questionnaire.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

W912DQ19T1003

Section A - Solicitation/Contract Form

COMBINED SYNOPSIS/SOLICITATION

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

The solicitation number for this acquisition is W912DQ-19-T-1003 and it is being issued as a Request for Quote (RFQ).

The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2019-01.

This RFQ shall be set aside for small businesses and the associated North American Industry Classification System (NAICS) code is 561720 and the business size standard is $18M.

FAR 52.212-1, Instructions to Offerors – Commercial, does apply to this acquisition with no addenda to the provision.

FAR 52.212-2, Evaluation – Commercial Items, does apply to this acquisition. The specific evaluation criteria to be included are detailed in Section M of this combined synopsis/solicitation.

Offerors must include a completed copy of FAR 52.212-3, Offeror Representations and Certifications – Commercial Items, with its offer. This provision is included in Section I of this combined synopsis/solicitation.

FAR 52.212-4, Contract Terms and Conditions – Commercial Items, does apply to this acquisition with no addenda to the provision.

FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Items, applies to this acquisition. The specific clauses required are detailed in Section I of this combined synopsis/solicitation.

PARK CUSTODIAN SERVICE AT KANOPOLIS LAKE

The contractor shall provide all personnel, equipment, tools, materials, vehicles, supervision and other items and services necessary to perform park custodian services as described in the performance work statement (PWS). The contractor shall adhere to all local, state and federal regulations.

Past Performance Questionnaires, Experience Form and Solicitation return pages shall be returned to:

Joshua Higginbotham

Joshua.m.higginbotham@usace.army.m il ATTN: CECT-NWK-C 647 Federal Building 601 E 12th Street, Room 647 Kansas City, Missouri 64106

ALL PROPOSALS ARE DUE NO LATER THAN 18 March 2019 AT 10:00

AM CENTRAL.

OFFERORS INTERESTED IN RESPONDING TO THIS RFP MUST SUBMIT THEIR

PROPOSAL ON THE ATTACHED SYNOPSIS/SOLICITATION. Award will be made to the offeror providing the best value. Any questions regarding this synopsis/solicitation must be submitted by e-mail to the point of contact below. The System for Award Management (SAM) is a Federal Government owned and operated FREE web site that consolidates the capabilities in CCR, ORCA, and EPLS. All vendors must verify their information through this web site. If you were previously registered in CCR and ORCA, your organization's information is already in SAM. You just need to set up a SAM account and migrate your CCR roles. If you were previously registered in CCR, your registration should have been moved to SAM, and you just need to open an account, see the following link for instructions:

https://www.sam.gov/sam/transcript/Quick_Guide_for_Updating_or_Renewing_CCR- SAM_Registrations.pdf

If you were not previously registered, please go to https://www.sam.gov. Instructions for new registration are also located at the following link https://www.sam.gov/sam/transcript/Quick_Guide_for_Contract_Registrations.pdf to register.

Contractors may obtain information on registration and annual confirmation requirements via the Internet at http://www.sam.gov or by calling (866) 606-8220.

If you have questions about Government procurements in general or need assistance in the preparation of your quote, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptac-us.org/contracting-assistance/.

The Government reserves the right to cancel this combined synopsis/solicitation. Any questions should be sent to Joshua Higginbotham at (816) 389-3059 or at joshua.m.higginbotham@usace.army.mil

(End of Synopsis)

VENDOR INFORMATION

VENDOR’S INFORMATION

OFFEROR’S NAME:

OFFEROR’S ADDRESS:

OFFEROR’S PHONE #:

OFFEROR’S EMAIL:

OFFEROR’S DUNS #:

OFFEROR’S CAGE #:

SIGNATURE:

DATE SIGNED:

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 12 Months Base Period - Kanopolis Project Office

FFP

Janitorial services for the Kanopolis Project Office, including the Information Center Visitor and Administrative Office Building, Maintenance Buildings (Shop and Carpenter Shop), 1 April 2019 – 31 March 2020.

FOB: Destination

NET AMT

0002 12 Months Base Period - Kanopolis Project Office

FFP

Janitorial services for the Regulatory Office, 1 April 2019 – 31 March 2020

0003 12 Months OPTION OY 1 - Kanopolis Project Office

FFP

Janitorial services for the Kanopolis Project Office, including the Information Center Visitor and Administrative Office Building, Maintenance Buildings (Shop and Carpenter Shop), 1 April 2020 – 31 March 2021.

0004 12 Months OPTION OY 1- Kanopolis Project Office

FFP

Janitorial services for the Regulatory Office, 1 April 2020 – 31 March 2021

0005 12 Months OPTION OY 2 - Kanopolis Project Office

FFP

Janitorial services for the Kanopolis Project Office, including the Information Center Visitor and Administrative Office Building, Maintenance Buildings (Shop and Carpenter Shop), 1 April 2021 – 31 March 2022.

0006 12 Months OPTION OY 2 - Kanopolis Project Office

FFP

Janitorial services for the Regulatory Office, 1 April 2021 – 31 March 2022

0007 12 Months OPTION OY 3 - Kanopolis Project Office

FFP

Janitorial services for the Kanopolis Project Office, including the Information Center Visitor and Administrative Office Building, Maintenance Buildings (Shop and Carpenter Shop), 1 April 2022 – 31 March 2023.

0008 12 Months OPTION OY 3 - Kanopolis Project Office

FFP

Janitorial services for the Regulatory Office, 1 April 2022 – 31 March 2023

0009 12 Months OPTION OY 4 - Kanopolis Project Office

FFP

Janitorial services for the Kanopolis Project Office, including the Information Center Visitor and Administrative Office Building, Maintenance Buildings (Shop and Carpenter Shop), 1 April 2023 – 31 March 2024.

0010 12 Months OPTION OY 4 - Kanopolis Project Office

FFP

Janitorial services for the Regulatory Office, 1 April 2023 – 31 March 2024

Section C - Descriptions and Specifications

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK STATEMENT

FOR

JANITORIAL SERVICES

Information Center, Maintenance and Regulatory Offices, KANOPOLIS LAKE

1. DESCRIPTION OF SERVICES. The Contractor shall provide all personnel, equipment, supplies, supervision, and other items and services necessary to ensure that Janitorial services, as defined in this performance work statement (PWS), are completed in a manner that will maintain all buildings and facilities in a clean, sanitary condition, and grounds free of litter and debris.

MAINTAIN BUILDING FACILITIES:

1.1. Performance Requirements:

Cleanup for Service Facilities/Areas: The Contractor shall be responsible for maintaining the facilities listed below in a clean and sanitary condition, defined as being free of all particulate matter, film, spots, odor, streaks, or removable stains and objects. Glossy surfaces shall present a polished look free of water spots. Grounds shall be free of litter.

1.1.2Service Facilities/Areas:

The Contractor shall maintain the Information Center, Maintenance Building and Regulatory Office facilities listed below in a clean and sanitary condition in accordance with the identified performance standards.

FACILITIES

Carpet 3,078 ft2

Floor Tile (asphalt/vinyl) 156 ft2

Floor Tile (ceramic/quarry) 511 ft2 Concrete Floors (shops, garages) 175 ft2 Furniture (fabric, vinyl, wood, metal)

Window Accessories 38 blinds Glass Cleaning 1050 ft2 exterior glass, 1200 ft2 interior glass Doors, Door Frames, Walls Light Fixtures 58 fixtures Sinks, Counter Tops, Appliances Waste Removal 20 office trash cans Water Fountains, Restroom fixtures, Showers 6 restrooms, 1 shower

Ceilings 1,100 ft2

Exterior Roof Overhangs 800 ft2 (soffit and fascia)

Sidewalks 2,100 ft2

Toilet tissue, paper towels, soap, deodorant screens, sanitary napkins.

Maintain stock

Note: Quantities and Ft2 are estimates only.

1.1.2.1 CLEANUP – Building Components

1.1.2.1.1 Ceilings - Clean ceilings on inside and overhang on outside of buildings to remove spider webs, dust, bird and insect nests, dirt, and insect spots.

1.1.2.1.2 Walls, shower stalls, partitions, shower, stools, wash basins, doors and refuse containers: Clean and disinfect to ensure a sanitary condition free of all dirt, oil, lotions, soap residue, calcium deposits or other foreign matter. All surfaces including soap trays, faucets, stool lids, handicap bars, and plumbing fixtures shall present a dried polished appearance free of dirt, cleaning solution, disinfectant, and water spots. Exterior walls shall be free of foreign matter.

1.1.2.1.3 Floors and floor drain plates – Shall be disinfected and free of all dirt, sand, foreign matter, trash, and excess water.

1.1.2.1.4 Mirrors – Shall be free of dirt, dust, smudges, water spots and streaks.

1.1.2.1.5 Light Fixtures - Take down grillwork (if any), wash and dry to remove all dirt, dust, bugs, cobwebs, smudges, and streaks from fixtures, bulbs and grill. Reinstall grillwork.

1.1.2.1.6 Metal louvers and Doors – Maintain a clean appearance free of spider webs, bird and insect nests, bird droppings, dirt, dust, or other foreign matter.

1.1.2.1.7 Windows – Maintain a clean appearance free of spider webs, spotting, insects or other foreign matter. A thorough cleaning shall take place at a minimum of once every 30 days when temperatures are above freezing. Shall include inside, outside and inner screening of windows during service.

1.1.3 CLEANUP - Water fountains: Shall be cleaned and disinfected to remove all residue and stains and maintain a sanitary condition.

1.1.4 CLEANUP – Sidewalks/Patio:

1.1.4.1 Concrete areas shall be free of debris, stains, and residue. Excess (pooled) water shall be removed.

1.1.4.2 Cracks between sidewalk sections, and along buildings and/or graveled or paved areas within 30 feet of facility being serviced shall be kept free of grass and weeds. Grass and weeds removed shall be disposed of in brush or wooded areas outside the normal park mowing areas. Grass or weeds shall not be placed in a refuse container or dumpster.

1.1.4.3 Brick patio area located on northwest area of visitor center shall be free of debris, stains and residue. The picnic table and bench shall be free of spider webs, bird and insect nests, bird droppings, dirt, or other foreign matter.

1.1.5 CLEANUP - Refuse and litter handling (facilities):

1.1.5.1 Refuse containers located within the facility being serviced shall have all trash, litter, debris or residue removed. The containers shall present a clean and odor free condition. Plastic liners shall be replaced and will be furnished by the government.

1.1.5.2 Paper shredders located within the facility being serviced shall have all paper debris removed. The paper shredder containers shall be free of paper debris upon completion of each service. Plastic liners shall be replaced and will be furnished by the government.

1.1.6 MISCELLANEOUS DUTIES: The Contractor shall perform the following duties at each cleanup:

1.1.6.1 All paper shall be protected to prevent wetting during cleaning operations. Care shall be taken to avoid wetting of hand dryers, and electrical fixtures during cleaning.

1.1.6.2 All toilet paper dispensers shall be kept fully supplied.

1.1.6.3 All paper towel dispensers shall be kept fully supplied.

1.1.6.4 If temperatures are below freezing, sidewalks, and concrete floors shall not be hosed off, and water usage shall be kept to the minimum necessary to clean facilities.

1.2 DATES OF PERFORMANCE

1.2.1 The contract period shall be 1 April 2019, or date of award if later through 31 March 2020. Effective dates of full year renewal options (if exercised) shall be from 1 April through 31 March of the following year.

1.2.2 The contract period of performance shall begin 1 April 2019 or date of award if later, and continue through 31 March 2020.

1.2.2.1 The period of performance for renewal options (if exercised) shall be from 1 April through 31 March for each subsequent year.

1.3 SCHEDULED SERVCIES

1.3.1 Time of Performance

Services shall be conducted 1 weekday per week beginning in the afternoon/evening hours, starting no earlier than 4:00 pm to avoid conflicts with business operations, and will be completed no later than 10:00 p.m. in accordance with the following schedules. The selected weekly service day will remain consistent throughout the service period.

Service will not be performed on the following holidays: New Years Day, Martin Luther King Birthday, President’s Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Thanksgiving Day and Christmas Day.

2 ANNUAL COORDINATION MEETING. The Contractor shall meet with the COR annually during the first week of April to coordinate services.

3. SERVICE DELIVERY SUMMARY. The Contractor service requirements are summarized below.

Item PWS Para Performance Standard Surveillance Method

Maintain Building Interior

1.1

Maintain facilities in a clean and sanitary condition free of particulate matter, film, spots, streaks or removable stains. No more than 10% error per servicing.

100% Inspection or Random Inspection

Maintain Building Exterior

1.1

Facilities and exterior service areas maintained in clean condition be free of litter, vegetation and animal debris.

No more than 10% error per servicing.

100% Inspection or Random Inspection

Annual Coordination

Meeting 2 No more than one (1) error per year.

Complete prior to first Cleaning, after contract award and at the beginning each exercise option period.

Quality Control Plan

5.1

No more than one (1) error per year.

Complete prior to first Cleaning, after contract award and at the beginning each exercise option period

4. GOVERNMENT FURNISHED PROPERTY AND SERVICES. The following consumable items shall be furnished to the Contractor by the Government from stock. The Government shall retain control of expendables, to be dispensed on an as needed basis for use in performance of the contract.

1. Paper towels (for dispenser use only - NOT to be used for cleaning purposes)

2. Toilet tissue

3. Plastic trash bags

4. Water for cleaning

5. Contractor Daily Worksheets (once approved in Q. C. Plan)

6. Access code for doors and compound gate.

4.2. Contractor Furnished Equipment and Supplies: The Contractor shall furnish all equipment and supplies not identified in paragraph four (4) above, such as vacuum, mops, buckets, carpet cleaner, cleaning supplies, ect., necessary to accomplish the required work. All Contractor furnished equipment and supplies must be approved by the Contracting Officer’s Representative prior to initial use.

5. SPECIAL REQUIREMENTS.

5.1. QUALITY CONTROL. The Contractor shall develop and submit their Quality Control Plan for COR approval at the time of the Post Award Meeting. The Contractor shall maintain a quality program to ensure Park Custodian services are performed in accordance with established Best Commercial Practices and the PWS. The Contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. At a minimum the Contractor shall develop quality control procedures addressing the areas identified in paragraph three (3), Service Delivery Summary. As each area is serviced, the Contractor’s representative shall complete that portion of the Contractor’s Worksheet indicating the time services were completed and number of employees working the serviced area. Completed worksheets shall be signed and delivered, as directed by the COR.

5.1.1 The Contractor shall designate, in writing, a responsible on-site representative of each work crew who shall serve as a contact for matters involving quality, performance or non-performance of the required work assigned to that crew. The representative shall have the authority to correct non-performance.

5.1.2 The Contractor shall furnish to the Contracting Officer’s Representative a telephone number attended during normal business hours (7:00 a.m. – 4:00 p.m., CST) to which calls concerning performance or other contractual matters can be placed. For the purpose of time and date, a message will be deemed delivered to the Contractor at such time as it is delivered to the number provided by the Contractor.

5.2. QUALITY ASSURANCE. The Government will periodically evaluate the Contractor’s performance in accordance with the attached Quality Assurance Surveillance Plan.

5.3. GOVERNMENT REMEDIES. The contracting officer shall follow FAR 52.212.4, Contract Terms and Conditions-Commercial Items, for Contractor’s failure to perform satisfactory services or failure to correct non-conforming services.

Insurance

5.9 No more than one (1) error per year.

Obtain prior to first Cleaning.

Maintain through contract period of performance, including option years

(if exercised).

5.4. SECURITY REQUIREMENTS. The Contractor shall safeguard keys issued to perform the services required by this contract. All keys shall be returned to the Government upon request and/or completion of the contract.

Failure to return keys shall result in withholding of payment. The Contractor shall open and close gates within the contract boundary areas. The Contractor shall securely lock any gate that is opened by him/her, upon completion of the required work, or upon completion of the workday.

5.5 The Contractor shall immediately report any situation that could affect the health or safety of visitors, including maintenance needs utility problems, accidents, or violations of laws and regulations.

5.6 Coordination with the Project Office

5.6.1 Day to day contact with Government personnel, and telephone communication shall normally provide adequate information exchange. The Government reserves the right to schedule meetings at the Project Office as necessary to insure strict compliance with the terms of this contract. Such meetings shall be scheduled, to the extent possible, at mutually convenient times. However, upon notice, the Contractor shall attend meetings regarding matters affecting this contract.

5.7 Contractor Personnel

5.7.1 The Contractor shall exercise tact, diplomacy, and courtesy and present a neat and clean appearance when dealing with the public, government personnel and other contractors. All Contractor personnel shall be fully clothed, at all times, while performing these services. The Contractor shall not display or offer for sale, on Government property, personal property items, crafts, or like items.

5.8 Other Contractors: The Government may undertake or award other contracts for additional work, and the Contractor shall fully cooperate with such other Contractors and Government employees. All work must be carefully planned not to interfere with such other work. The Contractor shall not commit or permit any act that will interfere with the performance of work by other Contractors or by Government employees.

5.9 Insurance

In accordance with the clause FAR 52.228-5 Insurance-Work on a Government Installation, the Contractor shall procure and maintain during the entire period of performance under this contract the following kinds and minimum amounts of insurance:*

REQUIRED INSURANCE SCHEDULE

TYPE AMOUNT

Worker's Compensation Coverage complying with applicable State Statute Employer's Liability Minimum amount of $100,000 per occurrence.

Commercial General Liability Minimum amount of $300,000 per occurrence.

For bodily injury & $20,000 per accident for property damage.

NOTE: Coverage required (above) is minimums. If higher limits of coverage are required by State Statute, the Contractor shall be responsible for obtaining such additional coverage. Information regarding State requirements may be obtained by contacting the Kansas State Insurance Commissioner’s Office at 800-432-2484/

5.10 Payment

Contractor will invoice the Kanopolis Project Office for services on a monthly basis. Payment by VISA is an available option to the contractor and will require coordination prior to the commencement of work.

5.11 ANTITERRORISM/OPERATION SECURITY REQUIREMENTS

All contractor and all associated sub‐contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.

All contractor and all associated sub‐contractors employees will receive a CORPS Watch information paper (provided by the authorized government representative) and provide a written acknowledgement to the COR, no later than 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract.

The Contractor must pre‐screen candidates using the E‐verify Program (http://www.dhs.gov/E‐Verify) website to meet the established employment eligibility requirements. The vendor must ensure that the candidate has two valid forms of government issued identification to ensure the correct information is entered into the E‐verify system. An initial list of verified/eligible candidates must be provided to the COR no later than 3 business days after the initial contract award.

Per the E-Verify Website the following exemptions apply:

Employers whose contracts are exempt from the E-Verify federal contractor rule are not required to enroll in E-Verify. A contract is considered exempt if any one of the following applies: (1) It is for fewer than 120 days. (2) It is valued at less than $150,000, the simplified acquisition threshold (Source: http://www.uscis.gov/e-verify/federal-contractors/exemptions-and-exceptions).

All contract employees, including subcontractor employees who are not in possession of the appropriate security clearance, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas.

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 01-APR-2019 TO

31-MAR-2020

N/A USACE, KANSAS CITY +

DANIEL HAYS

KANOPOLIS LAKE PROJECT OFFICE 105

RIVERSIDE

MARQUETTE KS 67464

8163893093

966219

0002 POP 01-APR-2019 TO

31-MAR-2020

N/A (SAME AS PREVIOUS LOCATION)

0003 POP 01-APR-2020 TO

31-MAR-2021

N/A (SAME AS PREVIOUS LOCATION)

0004 POP 01-APR-2020 TO

31-MAR-2021

N/A (SAME AS PREVIOUS LOCATION)

0005 POP 01-APR-2021 TO

31-MAR-2022

N/A (SAME AS PREVIOUS LOCATION)

0006 POP 01-APR-2021 TO

31-MAR-2022

N/A (SAME AS PREVIOUS LOCATION)

0007 POP 01-APR-2022 TO

31-MAR-2023

N/A (SAME AS PREVIOUS LOCATION)

0008 POP 01-APR-2022 TO

31-MAR-2023

N/A (SAME AS PREVIOUS LOCATION)

0009 POP 01-APR-2023 TO

31-MAR-2024

N/A (SAME AS PREVIOUS LOCATION)

0010 POP 01-APR-2023 TO

31-MAR-2024

N/A (SAME AS PREVIOUS LOCATION)

Section H - Special Contract Requirements

SCA WAGE RATES

WD 15-5753 (Rev.-9) was first posted on www.wdol.gov on 01/01/2019

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5753 Daniel W. Simms Division of | Revision No.: 9 Director Wage Determinations| Date Of Revision: 12/26/2018 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.60 for calendar year 2019 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.60 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2019. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Kansas

Area: Kansas Counties of Ellsworth, Jewell, Lincoln, Marion, McPherson, Mitchell, Reno, Rice **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 12.69 01012 - Accounting Clerk II 15.89 01013 - Accounting Clerk III 17.75 01020 - Administrative Assistant 19.16 01035 - Court Reporter 22.72 01041 - Customer Service Representative I 10.87 01042 - Customer Service Representative II 12.23 01043 - Customer Service Representative III 13.34 01051 - Data Entry Operator I 13.80 01052 - Data Entry Operator II 15.07 01060 - Dispatcher, Motor Vehicle 17.43 01070 - Document Preparation Clerk 14.47 01090 - Duplicating Machine Operator 14.47 01111 - General Clerk I 12.11 01112 - General Clerk II 13.21 01113 - General Clerk III 14.83 01120 - Housing Referral Assistant 17.65 01141 - Messenger Courier 12.43 01191 - Order Clerk I 13.50 01192 - Order Clerk II 14.73 01261 - Personnel Assistant (Employment) I 14.19 01262 - Personnel Assistant (Employment) II 15.88 01263 - Personnel Assistant (Employment) III 17.85 01270 - Production Control Clerk 22.29 01290 - Rental Clerk 15.00 01300 - Scheduler, Maintenance 14.15 01311 - Secretary I 14.15

01312 - Secretary II 15.83 01313 - Secretary III 17.65 01320 - Service Order Dispatcher 15.58 01410 - Supply Technician 19.16 01420 - Survey Worker 14.71 01460 - Switchboard Operator/Receptionist 11.78 01531 - Travel Clerk I 13.06 01532 - Travel Clerk II 13.76 01533 - Travel Clerk III 14.82 01611 - Word Processor I 12.61 01612 - Word Processor II 14.15 01613 - Word Processor III 15.83 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 20.95 05010 - Automotive Electrician 19.91 05040 - Automotive Glass Installer 19.06 05070 - Automotive Worker 19.06 05110 - Mobile Equipment Servicer 16.98 05130 - Motor Equipment Metal Mechanic 20.95 05160 - Motor Equipment Metal Worker 19.06 05190 - Motor Vehicle Mechanic 21.18 05220 - Motor Vehicle Mechanic Helper 15.92 05250 - Motor Vehicle Upholstery Worker 18.02 05280 - Motor Vehicle Wrecker 19.06 05310 - Painter, Automotive 19.91 05340 - Radiator Repair Specialist 19.06 05370 - Tire Repairer 15.62 05400 - Transmission Repair Specialist 20.95 07000 - Food Preparation And Service Occupations 07010 - Baker 11.71 07041 - Cook I 11.07 07042 - Cook II 12.61 07070 - Dishwasher 8.83 07130 - Food Service Worker 9.76 07210 - Meat Cutter 13.67 07260 - Waiter/Waitress 8.79 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 19.62 09040 - Furniture Handler 13.76 09080 - Furniture Refinisher 19.62 09090 - Furniture Refinisher Helper 15.66 09110 - Furniture Repairer, Minor 17.54 09130 - Upholsterer 19.62 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 11.86 11060 - Elevator Operator 11.30 11090 - Gardener 13.83 11122 - Housekeeping Aide 11.36 11150 - Janitor 11.36 11210 - Laborer, Grounds Maintenance 11.12 11240 - Maid or Houseman 10.49 11260 - Pruner 10.12 11270 - Tractor Operator 12.89 11330 - Trail Maintenance Worker 11.12 11360 - Window Cleaner 12.48 12000 - Health Occupations 12010 - Ambulance Driver 16.19 12011 - Breath Alcohol Technician 16.68 12012 - Certified Occupational Therapist Assistant 24.80 12015 - Certified Physical Therapist Assistant 25.87 12020 - Dental Assistant 15.92 12025 - Dental Hygienist 34.53

12030 - EKG Technician 24.57 12035 - Electroneurodiagnostic Technologist 24.57 12040 - Emergency Medical Technician 16.19 12071 - Licensed Practical Nurse I 14.91 12072 - Licensed Practical Nurse II 16.68 12073 - Licensed Practical Nurse III 18.60 12100 - Medical Assistant 12.85 12130 - Medical Laboratory Technician 18.60 12160 - Medical Record Clerk 13.88 12190 - Medical Record Technician 15.53 12195 - Medical Transcriptionist 15.89 12210 - Nuclear Medicine Technologist 36.66 12221 - Nursing Assistant I 11.17 12222 - Nursing Assistant II 12.56 12223 - Nursing Assistant III 13.71 12224 - Nursing Assistant IV 15.38 12235 - Optical Dispenser 13.59 12236 - Optical Technician 14.91 12250 - Pharmacy Technician 15.80 12280 - Phlebotomist 13.37 12305 - Radiologic Technologist 23.82 12311 - Registered Nurse I 21.40 12312 - Registered Nurse II 26.17 12313 - Registered Nurse II, Specialist 26.17 12314 - Registered Nurse III 31.66 12315 - Registered Nurse III, Anesthetist 31.66 12316 - Registered Nurse IV 37.95 12317 - Scheduler (Drug and Alcohol Testing) 20.67 12320 - Substance Abuse Treatment Counselor 18.69 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 18.36 13012 - Exhibits Specialist II 22.75 13013 - Exhibits Specialist III 27.82 13041 - Illustrator I 18.36 13042 - Illustrator II 22.75 13043 - Illustrator III 27.82 13047 - Librarian 25.19 13050 - Library Aide/Clerk 12.63 13054 - Library Information Technology Systems 21.60 Administrator 13058 - Library Technician 14.53 13061 - Media Specialist I 16.41 13062 - Media Specialist II 18.36 13063 - Media Specialist III 20.47 13071 - Photographer I 16.41 13072 - Photographer II 18.36 13073 - Photographer III 22.75 13074 - Photographer IV 27.82 13075 - Photographer V 33.66 13090 - Technical Order Library Clerk 15.50 13110 - Video Teleconference Technician 16.41 14000 - Information Technology Occupations 14041 - Computer Operator I 17.92 14042 - Computer Operator II 18.33 14043 - Computer Operator III 21.46 14044 - Computer Operator IV 23.01 14045 - Computer Operator V 25.46 14071 - Computer Programmer I (see 1) 22.75 14072 - Computer Programmer II (see 1) 25.78 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1)

14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 17.92 14160 - Personal Computer Support Technician 24.04 14170 - System Support Specialist 24.00 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 28.83 15020 - Aircrew Training Devices Instructor (Rated) 34.88 15030 - Air Crew Training Devices Instructor (Pilot) 40.68 15050 - Computer Based Training Specialist / Instructor 28.83 15060 - Educational Technologist 26.09 15070 - Flight Instructor (Pilot) 40.68 15080 - Graphic Artist 21.75 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 40.68 15086 - Maintenance Test Pilot, Rotary Wing 40.68 15088 - Non-Maintenance Test/Co-Pilot 40.68 15090 - Technical Instructor 18.76 15095 - Technical Instructor/Course Developer 22.94 15110 - Test Proctor 15.14 15120 - Tutor 15.14 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 9.37 16030 - Counter Attendant 9.37 16040 - Dry Cleaner 11.84 16070 - Finisher, Flatwork, Machine 9.37 16090 - Presser, Hand 9.37 16110 - Presser, Machine, Drycleaning 9.37 16130 - Presser, Machine, Shirts 9.37 16160 - Presser, Machine, Wearing Apparel, Laundry 9.37 16190 - Sewing Machine Operator 12.59 16220 - Tailor 13.35 16250 - Washer, Machine 10.18 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 22.95 19040 - Tool And Die Maker 29.95 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 17.26 21030 - Material Coordinator 22.29 21040 - Material Expediter 22.29 21050 - Material Handling Laborer 13.42 21071 - Order Filler 12.00 21080 - Production Line Worker (Food Processing) 17.26 21110 - Shipping Packer 16.69 21130 - Shipping/Receiving Clerk 16.69 21140 - Store Worker I 14.77 21150 - Stock Clerk 19.07 21210 - Tools And Parts Attendant 17.26 21410 - Warehouse Specialist 17.26 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 29.78 23019 - Aircraft Logs and Records Technician 24.24 23021 - Aircraft Mechanic I 28.49 23022 - Aircraft Mechanic II 29.78 23023 - Aircraft Mechanic III 30.93 23040 - Aircraft Mechanic Helper 21.06 23050 - Aircraft, Painter 27.22 23060 - Aircraft Servicer 24.24 23070 - Aircraft Survival Flight Equipment Technician 27.22 23080 - Aircraft Worker 25.77 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 25.77 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 28.49

II

23110 - Appliance Mechanic 19.62 23120 - Bicycle Repairer 17.91 23125 - Cable Splicer 32.59 23130 - Carpenter, Maintenance 21.09 23140 - Carpet Layer 20.40 23160 - Electrician, Maintenance 23.67 23181 - Electronics Technician Maintenance I 25.48 23182 - Electronics Technician Maintenance II 26.90 23183 - Electronics Technician Maintenance III 30.71 23260 - Fabric Worker 19.18 23290 - Fire Alarm System Mechanic 22.55 23310 - Fire Extinguisher Repairer 17.91 23311 - Fuel Distribution System Mechanic 22.55 23312 - Fuel Distribution System Operator 17.91 23370 - General Maintenance Worker 18.69 23380 - Ground Support Equipment Mechanic 28.49 23381 - Ground Support Equipment Servicer 24.24 23382 - Ground Support Equipment Worker 25.77 23391 - Gunsmith I 17.91 23392 - Gunsmith II 20.40 23393 - Gunsmith III 22.55 23410 - Heating, Ventilation And Air-Conditioning 22.64 Mechanic 23411 - Heating, Ventilation And Air Contidioning 23.68 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 21.77 23440 - Heavy Equipment Operator 20.58 23460 - Instrument Mechanic 22.55 23465 - Laboratory/Shelter Mechanic 21.55 23470 - Laborer 13.42 23510 - Locksmith 21.55 23530 - Machinery Maintenance Mechanic 22.58 23550 - Machinist, Maintenance 20.58 23580 - Maintenance Trades Helper 15.77 23591 - Metrology Technician I 22.55 23592 - Metrology Technician II 23.57 23593 - Metrology Technician III 24.48 23640 - Millwright 22.55 23710 - Office Appliance Repairer 21.55 23760 - Painter, Maintenance 18.96 23790 - Pipefitter, Maintenance 22.34 23810 - Plumber, Maintenance 21.22 23820 - Pneudraulic Systems Mechanic 22.55 23850 - Rigger 22.55 23870 - Scale Mechanic 20.40 23890 - Sheet-Metal Worker, Maintenance 21.95 23910 - Small Engine Mechanic 20.40 23931 - Telecommunications Mechanic I 26.20 23932 - Telecommunications Mechanic II 27.41 23950 - Telephone Lineman 24.67 23960 - Welder, Combination, Maintenance 19.95 23965 - Well Driller 22.55 23970 - Woodcraft Worker 22.55 23980 - Woodworker 17.91 24000 - Personal Needs Occupations 24550 - Case Manager 16.02 24570 - Child Care Attendant 10.20 24580 - Child Care Center Clerk 12.75 24610 - Chore Aide 10.01 24620 - Family Readiness And Support Services 16.02 Coordinator

24630 - Homemaker 16.25 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 22.93 25040 - Sewage Plant Operator 23.96 25070 - Stationary Engineer 25.22 25190 - Ventilation Equipment Tender 16.68 25210 - Water Treatment Plant Operator 20.86 27000 - Protective Service Occupations 27004 - Alarm Monitor 16.74 27007 - Baggage Inspector 13.27 27008 - Corrections Officer 15.29 27010 - Court Security Officer 17.24 27030 - Detection Dog Handler 17.18 27040 - Detention Officer 15.29 27070 - Firefighter 17.85 27101 - Guard I 13.27 27102 - Guard II 17.18 27131 - Police Officer I 18.59 27132 - Police Officer II 20.66 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 11.43 28042 - Carnival Equipment Repairer 12.19 28043 - Carnival Worker 9.29 28210 - Gate Attendant/Gate Tender 14.32 28310 - Lifeguard 10.82 28350 - Park Attendant (Aide) 16.01 28510 - Recreation Aide/Health Facility Attendant 11.69 28515 - Recreation Specialist 19.85 28630 - Sports Official 12.76 28690 - Swimming Pool Operator 15.81 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 21.95 29020 - Hatch Tender 21.95 29030 - Line Handler 21.95 29041 - Stevedore I 20.66 29042 - Stevedore II 22.29 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 38.39 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 26.47 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 29.15 30021 - Archeological Technician I 17.30 30022 - Archeological Technician II 18.90 30023 - Archeological Technician III 23.42 30030 - Cartographic Technician 23.42 30040 - Civil Engineering Technician 19.68 30051 - Cryogenic Technician I 25.94 30052 - Cryogenic Technician II 28.64 30061 - Drafter/CAD Operator I 16.90 30062 - Drafter/CAD Operator II 18.90 30063 - Drafter/CAD Operator III 21.07 30064 - Drafter/CAD Operator IV 25.94 30081 - Engineering Technician I 16.25 30082 - Engineering Technician II 18.25 30083 - Engineering Technician III 22.54 30084 - Engineering Technician IV 24.66 30085 - Engineering Technician V 33.08 30086 - Engineering Technician VI 40.00 30090 - Environmental Technician 22.43 30095 - Evidence Control Specialist 23.42 30210 - Laboratory Technician 20.67 30221 - Latent Fingerprint Technician I 25.94 30222 - Latent Fingerprint Technician II 28.64

30240 - Mathematical Technician 23.48 30361 - Paralegal/Legal Assistant I 18.63 30362 - Paralegal/Legal Assistant II 23.48 30363 - Paralegal/Legal Assistant III 28.72 30364 - Paralegal/Legal Assistant IV 34.16 30375 - Petroleum Supply Specialist 28.64 30390 - Photo-Optics Technician 23.48 30395 - Radiation Control Technician 28.64 30461 - Technical Writer I 21.24 30462 - Technical Writer II 25.98 30463 - Technical Writer III 31.43 30491 - Unexploded Ordnance (UXO) Technician I 24.40 30492 - Unexploded Ordnance (UXO) Technician II 29.52 30493 - Unexploded Ordnance (UXO) Technician III 35.38 30494 - Unexploded (UXO) Safety Escort 24.40 30495 - Unexploded (UXO) Sweep Personnel 24.40 30501 - Weather Forecaster I 25.94 30502 - Weather Forecaster II 31.54 30620 - Weather Observer, Combined Upper Air Or (see 2) 21.07 Surface Programs 30621 - Weather Observer, Senior (see 2) 23.42 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 29.52 31020 - Bus Aide 10.85 31030 - Bus Driver 13.88 31043 - Driver Courier 13.09 31260 - Parking and Lot Attendant 11.77 31290 - Shuttle Bus Driver 13.87 31310 - Taxi Driver 11.48 31361 - Truckdriver, Light 13.87 31362 - Truckdriver, Medium 14.40 31363 - Truckdriver, Heavy 18.59 31364 - Truckdriver, Tractor-Trailer 18.59 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.39 99030 - Cashier 8.86 99050 - Desk Clerk 9.27 99095 - Embalmer 27.40 99130 - Flight Follower 24.40 99251 - Laboratory Animal Caretaker I 11.94 99252 - Laboratory Animal Caretaker II 12.63 99260 - Marketing Analyst 24.49 99310 - Mortician 27.40 99410 - Pest Controller 20.55 99510 - Photofinishing Worker 12.82 99710 - Recycling Laborer 15.15 99711 - Recycling Specialist 17.51 99730 - Refuse Collector 12.92 99810 - Sales Clerk 11.90 99820 - School Crossing Guard 11.60 99830 - Survey Party Chief 20.36 99831 - Surveying Aide 12.56 99832 - Surveying Technician 17.23 99840 - Vending Machine Attendant 17.71 99841 - Vending Machine Repairer 21.04 99842 - Vending Machine Repairer Helper 17.71

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal

Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.48 per hour or $179.20 per week or $776.53 per month

HEALTH & WELFARE EO 13706: $4.18 per hour, or $167.20 per week, or $724.53 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 10 years, and 4 after 20 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin Luther King Jr's Birthday, Washington's Birthday, Good Friday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.)

(See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the "Service Contract Act Directory of Occupations", Fifth Edition (Revision 1), dated September 2015, unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE, Standard Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)).

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it.