Combined_Synopsis_and_Solicitation_-_W912DQ19R1031_Mowing.pdf

SEE ADDENDUM

(No Collect Calls)

W912DQ19R1031 22-Jan-2019

b. TELEPHONE NUMBER

816-389-3850

8. OFFER DUE DATE/LOCAL TIME

02:00 PM 22 Feb 2019

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912DQ9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

CHRISTOPHER W ANDERSON

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

USACE, KANSAS CITY +

FEDERAL BLDG CT-H 601 E 12TH ST RM 647

KANSAS CITY MO 64106-2896

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 966475 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

USACE, KANSAS CITY +

RACHEL R. DONATTI

HS TRUMAN PROJECT OFFICE 15968 TRUMAN RD

WARSAW MO 65355

TEL: 816-389-3606 FAX: 660-438-7815

816-389-2030FAX:

TEL: 816-389-3812 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$7,500,000

NAICS:

561730

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF46

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912DQ19R1031

Section A - Solicitation/Contract Form

SYNOPSIS / SOLICITATION:

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in subpart

12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation, proposals are being requested and a written solicitation will not be issued.

The solicitation number for this acquisition is W912DQ-19-R-1031 and it is being issued as a Request for Quotes

(RFQ).

The solicitation documents and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-84.

This RFQ shall be set aside for small businesses and the associated North American Industry Classification system (NAICS) code is 561730, “Landscaping Services” and the business size standard is $7,500,000.00.

Far 52.212-1, Instructions to Offerors- Commercial does apply to this acquisition with no addenda to the provision and is located in Section L of this combined synopsis/solicitation.

Far 52.212-2, Evaluation - Commercial Edited does apply to this acquisition with no addenda to the provision and is located in Section M of this combined synopsis/solicitation.

FAR 52.212-3, Offeror Representations and Certifications -- Commercial Items, does apply to this acquisition with no addenda to the provision, and is located in Section K of this combined synopsis/solicitation.

FAR 52.212-4, Contract Terms and Conditions - Commercial Items, does apply to this acquisition with no addenda to the provision. These specific clauses required are located in Section I of this combined synopsis/solicitation.

FAR 52.212-5, Contract Terms and Conditions - Required to Implement Statutes or Executive Orders- Commercial Items, applies to this acquisition. These specific clauses required are located in Section I of this combined synopsis/solicitation.

System for Award Management

In accordance with FAR 52.212-1(k): By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance and through final payment of any contract resulting from this solicitation. If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. Offerors may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://sam.gov/portal/SAM/#1 . It is highly encouraged that all prospective Offeror’s start the SAM’s registration process as soon as possible.

OFFEROR MUST BE REGISTERED IN THE SYSTEM FOR AWARD MANAGEMENT WITHIN 7 DAYS

OF THE CLOSE OF THE SOLICITATION OR THE CONTRACT OFFICER MAY PROCEED WITH

AWARD TO THE NEXT SUCCESSFUL CONTRACTOR.

If you were not previously registered, please go to https://www.sam.gov. Instructions for new registration are also located at the following link https://www.sam.gov/sam/transcript/Quick_Guide_for_Contract_Registrations_v1.7.pdf to register.

If you have questions about Government procurements in general or need assistance in the preparation of your proposal, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptac-us.org/sam-registration/ THIS A FREE SERVICE BY A NON PROFIT PAID FOR BY THE US GOVERNMENT

SAMs UPDATE:

Alleged Fraudulent Activity in SAM GSA has taken action to address alleged fraudulent activity in the System for Award Management (SAM). The measures GSA already put in place to help prevent improper activity in SAM include masking specific data elements in the entity registration even for authorized entity users; requiring “parent” approval of new registrations for their “child” entities; and requiring the formal appointment of the Entity Administrator by original, signed notarized letter.

Additional enhanced controls have been deployed. These controls include implementing multi-factor authentication using login.gov and notifying Entity Administrators when there is a change in the entity’s bank account information.

NOTARIZED LETTER PROCESS CHANGES

How has the notarized letter review process changed?

All non-Federal entities who create or update their registration in SAM.gov will no longer need to have an approved Entity Administrator notarized letter on file before their registration is activated.

This applies to you if your SAM.gov Purpose of Registration is either Federal Assistance or All Awards.

Check SAM.gov to find your Purpose of Registration.

All non-Federal entities still must mail the original, signed copy of the notarized letter to the Federal Service Desk.

Where can I find the notarized letter templates?

Read the instructions for domestic entities or instructions for international entities posted at the Federal Service Desk.

Where do I send the notarized letter?

You must mail the original, notarized letter to:

FEDERAL SERVICE DESK

ATTN: SAM.GOV REGISTRATION PROCESSING

460 INDUSTRIAL BLVD

LONDON, KY 40741-7285

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job Mowing Services Power Plant Areas 2019

FFP

The contractor shall provide all personnel, equipment, tools, supervision, and other items and services necessary to provide mowing and trimming services as defined in this Performance Work Statement (PWS) dated 19 January 2019.

FOB: Destination

NET AMT

0002 1 Job Mowing Services Joint Areas 2019

FFP

The contractor shall provide all personnel, equipment, tools, supervision, and other items and services necessary to provide mowing and trimming services as defined

0003 1 Job Mowing Services Rec Areas 2019

FFP

The contractor shall provide all personnel, equipment, tools, supervision, and other items and services necessary to provide mowing and trimming services as defined

0004 1 Job OPTION Mowing Services Power Plant Areas 2020

FFP

The contractor shall provide all personnel, equipment, tools, supervision, and other items and services necessary to provide mowing and trimming services as defined

0005 1 Job OPTION Mowing Services Joint Areas 2020

FFP

The contractor shall provide all personnel, equipment, tools, supervision, and other items and services necessary to provide mowing and trimming services as defined

0006 1 Job OPTION Mowing Services Rec Areas 2020

FFP

The contractor shall provide all personnel, equipment, tools, supervision, and other items and services necessary to provide mowing and trimming services as defined

0007 1 Job OPTION Mowing Services Power Plant Areas 2021

FFP

The contractor shall provide all personnel, equipment, tools, supervision, and other items and services necessary to provide mowing and trimming services as defined

0008 1 Job OPTION Mowing Services Joint Areas 2021

FFP

The contractor shall provide all personnel, equipment, tools, supervision, and other items and services necessary to provide mowing and trimming services as defined

0009 1 Job OPTION Mowing Services Rec Areas 2021

FFP

The contractor shall provide all personnel, equipment, tools, supervision, and other items and services necessary to provide mowing and trimming services as defined

Section C - Descriptions and Specifications

PWS:

PERFORMANCE WORK STATEMENT

MOWING AND TRIMMING SERVICES

HARRY S. TRUMAN LAKE

19 January 2019

1. DESCRIPTION OF SERVICES. The contractor shall provide all personnel, equipment, tools, supervision, and other items and services necessary to ensure that mowing and trimming is performed at Harry S. Truman Lake, MO in a manner that will maintain healthy grass, trees, shrubs, and plants and present a clean, neat, and professional appearance.

1.1. MAINTAIN IMPROVED GROUNDS.

1.1.1. The Contractor is responsible for ensuring all requirements and standards as stated in this

Performance Work Statement and on the attached Maps are met throughout the period of performance of this contract. All mowing shall be completed in an area prior to moving to another area. Mowing shall be accomplished so that all grassed areas are maintained at a height between 3” and 6”. It is the Contractor’s responsibility to ensure no damage is done to any inanimate objects, such as trees, bushes, walls, posts, signs, park equipment or other objects.

Mowing with heavy equipment will not be permitted when the ground is so wet that the mowing operations cause rutting or otherwise disturb existing turf. It is the Contractor’s responsibility to select the appropriate equipment to ensure all grass is cut to meet the standards as stated in this PWS during each mowing. Tractors/mowers shall be operated in such a manner as to protect against the sod/grass being torn by the wheels on turns. In the event sod/grass is damaged, the Contractor shall re-dress and seed the damaged areas with KY-31 fescue seed at the rate of 100 pounds per acres or Contracting Officer Representative’s (COR) approved equal. Extreme care shall be exercised when mowing and trimming around trees, bushes, shrubs, to insure equipment does not damage objects. Repair or replacement in size, kind and type resulting from damage by the Contractor’s equipment shall be borne by the Contractor. Repair or replacement shall occur within 30 calendar days of noticed damage.

1.1.2. Mowing shall be scheduled by the Contractor throughout the period of performance except that all areas delineated as Miscellaneous shall be mowed prior to all major holidays (Memorial Day, Fourth of July and Labor Day). The Contractor shall take into consideration anticipated growth rates during the season so to schedule the work to meet height requirements of the grass and vegetation.

The Contractor’s work schedule shall be from 10 April thru 31 October of each Period of Performance included in this contract.

1.1.3. Grass and vegetation at Lagoons shall be maintained at a height between 4” and 8” throughout the period of performance.

1.1.4. Mowing and trimming at the Project Office and the Visitor’s Center shall include weed control in the flower/rock beds surrounding the facilities. Weeds must be manually removed unless the Contractor possesses a valid certified herbicide applicator’s license in which case they may be controlled by spraying. License shall be submitted to the Government if spraying is the preferred method of control.

1.1.5 All trimming shall be accomplished either simultaneously or immediately following mowing, and in all instances shall be completed no later than 24 hours after mowing, except that this paragraph shall not be construed to alter the total time allowed as specified. Trees or other objects shall not be bumped or scraped by mowers. Trimming shall be accomplished up to the last blade of grass surrounding trees, bushes and all other inanimate objects. No damage shall be caused to those objects being mowed around. Maintain appropriate clearance between roll-over protection on equipment and signs so that signs are not scratched or damaged. All costs associated with replacing damaged signs due to Contractor’s negligence will be borne by the Contractor. The guardrail at all boat ramps and all riprap areas surrounding boat ramps and boat ramp parking lots shall be trimmed to include three (3) feet down the riprap slope. This includes the walkways down to the fishing docks in the Bledsoe Ferry East area. Trimming is required around trees and inanimate objects located within the footprint of the areas identified as Miscellaneous areas. Movable objects, such as picnic tables, shall be moved and the areas around and under such objects shall be mowed and trimmed. Objects shall be returned to their original positions and sidewalks, entrances into buildings and building interiors shall be cleared of clippings. Limbs and sticks shall be removed and placed in the wooded area and the grass where the limbs once laid is to be mowed. Do not mow over or around litter or limbs, remove it from the path of mowing and complete mowing operations. Grass clippings and debris shall not be left on sidewalks, entrances into buildings and building interiors overnight, even if the trimming operations are not completed. Trimming height shall match surrounding area grass heights.

1.1.6 All mowing equipment shall be compatible with each other in mowing height and appearance of cut grass. The contractor shall reference the attached maps for specific area mowing instructions. Exact boundary limits of mowing and trimming shall be as directed by the COR. Once the first round of mowing is completed an initial inspection shall be held between the COR and the Contractor to confirm boundaries as delineated on the maps have been met. The established boundaries during this inspection will the expected paths of mowing throughout the season. All park signs that are located along the edge of non-mowed areas shall have a minimum of one full 48” mowing pass around the sign. Mowers with a cutting width of over 96 inches will not be permitted for use in any park areas.

1.1.7 The Contractor shall trim all, alive or dead, grass along or within parking lots, camp pads, playgrounds, swim beaches, hydrant and dumpster enclosures.

1.1.8 All acreages are estimated. The Contractor shall be responsible for determining exact acreage and conditions affecting performance of this work. Maps are attached for a clear delineation of expected mowing locations with specific details provided for each area.

1.1.9 Mowing and trimming operations around buildings, sidewalks, and roadways shall be performed so clippings are thrown outward onto the grassed area. Mowing of lagoons shall include mowing at least 12 feet beyond the perimeter of the fence where possible and trimming or mowing to the water’s edge.

Roadway mowing consists of total right-of-way mowing from road shoulder to the tree line or unless as otherwise noted on the maps.

AREAS, ACREAGES and QUANTITIES MOWING AND TRIMMING SERVICES

HARRY S. TRUMAN LAKE

Areas Estimated

Mixed Grass Acres

Estimated Miscellaneous

Acres Lagoon Acres

Estimated Total Acres

CLIN 0001 Power Plant Areas

Lab Yard/PowerHouse/Switch 2.2 12.2 0 14.4

CLIN 0002 Joint Areas

Access Road A/ West Access Rd 6.2 9.8 0 16

Access Road B/East Access Rd 3.6 0.1 0 3.7

Admin Area 3.6 4.7 0 8.3

Maintenance Compound 1.8 0 0.8 2.3

Right and Left Levees 4.3 0 0 4.3

CLIN 0003 Rec Areas

Berry Bend Public Use Area 35 0 4.4 39.4

Bledsoe Ferry East 13.7 0 0 13.7

Bledsoe Ferry West 13.6 0 0 13.6

Bucksaw 42.3 22 3.5 67.8

Cooper Creek 1 0 0 1

Crowe’s Crossing 0.5 0 0 0.5

Fairfield 2.9 0 0 2.9

Long Shoal 26.5 6.5 2.3 35.3

Osage Bluff 16 2.3 2.6 20.9

Sac River 1.3 0 0 1.3

Shawnee Bend 12.7 12.4 0 25.1

Sparrowfoot 24.1 0 3.2 27.3

Sterett Creek 2.4 0 0 2.4

Talley Bend 8.1 0 1.1 9.2

Thibaut Point 16 0 1.9 17.9

Visitor’s Center 5 2 0 7

Windsor Crossing 1.7 0 0 1.7

TOTAL 244.5 72 19.8 336

The term “required services” as applied to time allowed shall be deemed to include all trimming and debris removal services.

Acreages shown above are estimated. The Contractor shall be responsible for determining all acreages and conditions affecting the performance of the work.

1.2 ANNUAL COORDINATION MEETING. The contractor shall meet with the COR annually during the first week of April to coordinate services.

2. HOLIDAY MOWING. The Contractor shall schedule work such that all areas included in this PWS are mowed prior to the Memorial Day, Fourth of July, and Labor Day holidays.

3. SERVICE DELIVERY SUMMARY. The contractor service requirements are summarized below.

Item PWS Para Performance Standard Surveillance Method

Maintain Improved Grounds

1.1

Grass is maintained between height of 3- 6” in all areas as stated throughout period of performance. Lagoons shall be maintained at a height between 4-8”. Grass is healthy and looks well maintained. All trimming and clipping removal is completed per PWS.

100% Inspection or Random Inspection

Annual Coordination Meeting

1.2

No more than one (1) error per year.

Complete prior to first mowing of the contract award and each option exercise period.

Quality Control Plan

5.1 mowing of the contract award and each option exercise period.

Accident Prevention Plan

5.6.3 mowing of the contract award and each option exercise period.

4. GOVERNMENT FURNISHED PROPERTY AND SERVICES. Contractor Worksheet forms and keys to gate areas under this contract.

5. GENERAL INFORMATION.

5.1. QUALITY CONTROL. The contractor shall develop, submit for COR approval, and maintain a quality program to ensure mowing and trimming services are performed in accordance with established Best Commercial Practices and this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. At a minimum the contractor shall develop quality control procedures addressing the areas identified in paragraph 3, Service Delivery Summary. As each area is serviced, the Contractor’s representative shall complete that portion of the Contractor’s Worksheet indicating the time services were completed and number of employees working the serviced area. Completed worksheets shall be signed and delivered, as directed by the COR.

5.2. QUALITY ASSURANCE. The government will periodically evaluate the contractor’s performance in accordance with the attached Quality Assurance Surveillance Plan. An initial inspection will be held between the COR and the Contractor upon completion of the first cutting to ensure the appropriate boundaries as identified on the maps are met to establish the quality of work expected throughout the duration of contract period of performance.

5.3. GOVERNMENT REMEDIES. The contracting officer shall follow FAR 52.212.4, Contract Terms and

Conditions-Commercial Items, for contractor’s failure to perform satisfactory services or failure to correct non-conforming services.

5.4. HOURS OF SERVICE PERIODS. Mowing shall be conducted weekdays Monday through Friday 7am to 8pm unless approved in advance by the COR. Work will not be permitted on Saturdays, Sundays, or holidays unless this restriction is specifically waived in writing by the COR.

5.5. SECURITY REQUIREMENTS. The contractor shall safeguard keys issued to perform the services required by this contract. All keys shall be returned to the government upon request and/or completion of the contract. Failure to return keys shall result in withholding of payment. The contractor shall open and close gates within the contract boundary areas. The contractor shall securely lock any gate that is opened by him/her, upon completion of the required work, or upon completion of the workday.

5.6. SPECIAL REQUIREMENTS.

5.6.1. SAFETY. Some of the areas to be mowed and trimmed receive heavy use. Campers and day-users will be present on weekdays. It will be necessary for the contractor to perform the work in close proximity to camping vehicles and camping units, sewer lines, electrical cords, water hook-ups, fishing equipment, and/or camping equipment. All mowers shall be equipped and maintained with safety chains, discharge-deflection devices, and/or other approved safety devices to prevent accidental damage or injury from objects thrown by mowers. When operating equipment within 50 feet of campers, or their property, the ground speed of the equipment shall be reduced to a “safe and reasonable rate”. The final decision of what is “safe and reasonable” shall be that of the COR. Claims of damage from operation of the Contractor’s equipment shall be settled promptly. When damage occurs from the contractor’s equipment, the contractor shall contact the party sustaining the damage, and project personnel as soon as possible.

5.6.2. Contractor personnel shall present a neat appearance and be fully clothed at all times while performing services ordered under contract. “Fully Clothed” shall be deemed to mean that a sleeved shirt(or T-shirt), trousers, and shoes shall be worn at all times: except that this requirement shall not be construed to replace or eliminate the necessity for the wearing of appropriate protective clothing or devices as may be required for the safe performance of services.

5.6.3. Prior to beginning work on this contract the Contractor shall have an approved Accident Prevention Plan. This plan shall be in accordance with the most recent EM 385-1-1 dated 15 September 2008.

The plan is intended to be a viable document and enhance the safety of Project staff and visitors. The Contractor will be expected to take a vital interest in safety, and educate their employees to work and plan their work safely. Proper driving techniques and defensive driving shall be practiced to prevent vehicle accidents and property damage.

5.6.4. The Contractor shall prepare an Activity Hazard Analysis (AHA) for each work activity. The AHA will define the activities being performed and identify the sequences of work, the specific hazards anticipated and the control measures to be implemented to eliminate or reduce each hazard to an acceptable level of risk. All AHAs shall be submitted as part of the Accident Prevention Plan.

5.6.5. FLOOD CONTROL. Occasional retention of floodwater may inundate portions of the public use areas, or access roads thereto, being serviced by this contract. In the event that inundation affects the contractor’s ability to accomplish all work in accordance with this PWS, the contractor shall promptly notify the COR. The Government may request the contractor submit a pricing proposal covering the unserviceable or affected portion of work in order that an equitable adjustment to contract price can be negotiated.

5.6.6. The Government reserves the right to install/place additional trees, signs, facilities, equipment, etc.

necessary for the maintenance/upgrading of facilities. The Government may, at no additional charge, increase the number of items around which mowing and trimming is required.

5.7 ROAD CLOSURES: Various roads and/or the road across the dam may be closed from time to time during the life of this contract. The closure of the roads may continue for several months under certain flooding, construction, and/or maintenance circumstances. The Contractor shall be prepared to take an alternate route during these times, at no additional cost to the government.

5.8 INSURANCE. The contractor shall submit their insurance prior to the start of work the minimum requirements are as stated below unless federal, state or local regulations have stricter requirements.

Limitation of Liability - Services.

(a) Except as provided in paragraphs (b) and (c) below, and except to the extent that the Contractor is expressly responsible under this contract for deficiencies in the services required to be performed under it (including any materials furnished in conjunction with those services), the Contractor shall not be liable for loss of or damage to property of the Government that

(1) Occurs after Government acceptance of services performed under this contract; and

(2) Results from any defects or deficiencies in the services performed or materials furnished.

(b) The limitation of liability under paragraph (a) above shall not apply when a defect or deficiency in, or the Government's acceptance of, services performed or materials furnished results from willful misconduct or lack of good faith on the part of any of the Contractor's managerial personnel. The term "Contractor's managerial personnel," as used in this clause, means the Contractor's directors, officers, and any of the Contractor's managers, superintendents, or equivalent representatives who have supervision or direction of --

(1) All or substantially all of the Contractor's business;

(2) All or substantially all of the Contractor's operations at any one plant, laboratory, or separate location at which the contract is being performed; or

(3) A separate and complete major industrial operation connected with the performance of this contract.

(c) If the Contractor carries insurance, or has established a reserve for self-insurance, covering liability for loss or damage suffered by the Government through the Contractor's performance of services or furnishing of materials under this contract, the Contractor shall be liable to the Government, to the extent of such insurance or reserve, for loss of or damage to property of the Government occurring after Government acceptance of, and resulting from any defects and deficiencies in, services performed or materials furnished under this contract.

(End)

Liability.

(a) Workers' compensation and employer's liability. Contractors are required to comply with applicable Federal and State workers' compensation and occupational disease statutes. If occupational diseases are not compensable under those statutes, they shall be covered under the employer's liability section of the insurance policy, except when contract operations are so commingled with a contractor's commercial operations that it would not be practical to require this coverage. Employer's liability coverage of at least $100,000 shall be required, except in States with exclusive or monopolistic funds that do not permit workers' compensation to be written by private carriers. (See 28.305(c) for treatment of contracts subject to the Defense Base Act.)

(b) General liability.

(1) The contracting officer shall require bodily injury liability insurance coverage written on the comprehensive form of policy of at least $500,000 per occurrence.

(2) Property damage liability insurance shall be required only in special circumstances as determined by the agency.

(c) Automobile liability. The contracting officer shall require automobile liability insurance written on the comprehensive form of policy. The policy shall provide for bodily injury and property damage liability covering the operation of all automobiles used in connection with performing the contract. Policies covering automobiles operated in the United States shall provide coverage of at least $200,000 per person and $500,000 per occurrence for bodily injury and $20,000 per occurrence for property damage. The amount of liability coverage on other policies shall be commensurate with any legal requirements of the locality and sufficient to meet normal and customary.

(End of Performance Work Statement)

SEE SCTION H

(End of Antiterrorism/Operations Security Requirement)

MAPS:

See PWS Attachment 01:

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 01-APR-2019 TO

31-MAR-2020

N/A USACE, KANSAS CITY +

RACHEL R. DONATTI

HS TRUMAN PROJECT OFFICE 15968

TRUMAN RD

WARSAW MO 65355

816-389-3606

966475

0002 POP 01-APR-2019 TO

31-MAR-2020

N/A (SAME AS PREVIOUS LOCATION)

0003 POP 01-APR-2019 TO

31-MAR-2020

N/A (SAME AS PREVIOUS LOCATION)

0004 POP 01-APR-2020 TO

31-MAR-2021

N/A (SAME AS PREVIOUS LOCATION)

0005 POP 01-APR-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

0006 POP 01-APR-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

0007 POP 01-APR-2021 TO

31-MAR-2022

N/A (SAME AS PREVIOUS LOCATION)

0008 POP 01-APR-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

0009 POP 01-APR-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

Section H - Special Contract Requirements

AT-OPSEC:

ANTITERRORISM/OPERATION SECURITY REQUIREMENTS

All contractor and all associated sub-contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation/facility access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204-9, Personal Identity Verification of Contractor Personnel) as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any installation or facility change, the Government may require changes in contractor security matters or processes. All contractor and all associated sub‐contractors employees will receive a CORPS Watch information paper (provided by the authorized government representative) and provide a written acknowledgement to the COR, no later than 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract.

The Contractor must pre-screen Candidates using the E-verify Program (http://www.uscis.gov/e-verify ) website to meet the established employment eligibility requirements. The Vendor must ensure that the Candidate has two valid forms of Government issued identification prior to enrollment to ensure the correct information is entered into the E-verify system. An initial list of verified/eligible Candidates must be provided to the COR no later than 3 business days after the initial contract award."

Per the E-Verify Website the following exemptions apply:

Employers whose contracts are exempt from the E-Verify federal contractor rule are not required to enroll in E- Verify. A contract is considered exempt if any one of the following applies: (1) It is for fewer than 120 days. (2) It is valued at less than $250,000, the simplified acquisition threshold (Source: http://www.uscis.gov/e-verify/federal-contractors/exemptions-and-exceptions).

All contract employees, including subcontractor employees who are not in possession of the appropriate security clearance, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas.

WAGE RATES:

WD 15-5093 (Rev.-9) was first posted on www.wdol.gov on 01/01/2019

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5093 Daniel W. Simms Division of | Revision No.: 9 Director Wage Determinations| Date Of Revision: 12/26/2018 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.60 for calendar year 2019 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.60 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2019. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Missouri

Area: Missouri Counties of Benton, Camden, Dent, Hickory, Laclede, Maries, Miller, Morgan, Phelps, Pulaski, St Clair **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 13.26 01012 - Accounting Clerk II 14.88 01013 - Accounting Clerk III 16.65 01020 - Administrative Assistant 21.57 01035 - Court Reporter 15.46 01041 - Customer Service Representative I 10.64 01042 - Customer Service Representative II 11.96 01043 - Customer Service Representative III 13.05 01051 - Data Entry Operator I 13.19 01052 - Data Entry Operator II 14.39 01060 - Dispatcher, Motor Vehicle 15.70 01070 - Document Preparation Clerk 13.85 01090 - Duplicating Machine Operator 13.85 01111 - General Clerk I 12.32 01112 - General Clerk II 13.44 01113 - General Clerk III 15.09 01120 - Housing Referral Assistant 17.24 01141 - Messenger Courier 11.87 01191 - Order Clerk I 12.40 01192 - Order Clerk II 13.53 01261 - Personnel Assistant (Employment) I 15.28 01262 - Personnel Assistant (Employment) II 17.09 01263 - Personnel Assistant (Employment) III 19.05 01270 - Production Control Clerk 21.30 01290 - Rental Clerk 12.62 01300 - Scheduler, Maintenance 13.82 01311 - Secretary I 13.82 01312 - Secretary II 15.46 01313 - Secretary III 17.24 01320 - Service Order Dispatcher 14.03 01410 - Supply Technician 21.57 01420 - Survey Worker 14.95 01460 - Switchboard Operator/Receptionist 11.31 01531 - Travel Clerk I 12.96 01532 - Travel Clerk II 14.00 01533 - Travel Clerk III 15.03 01611 - Word Processor I 12.31 01612 - Word Processor II 13.82 01613 - Word Processor III 15.46 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 22.23 05010 - Automotive Electrician 16.87 05040 - Automotive Glass Installer 15.95 05070 - Automotive Worker 15.95 05110 - Mobile Equipment Servicer 14.19 05130 - Motor Equipment Metal Mechanic 17.65 05160 - Motor Equipment Metal Worker 15.95 05190 - Motor Vehicle Mechanic 17.65 05220 - Motor Vehicle Mechanic Helper 13.33 05250 - Motor Vehicle Upholstery Worker 15.36 05280 - Motor Vehicle Wrecker 15.95 05310 - Painter, Automotive 16.86 05340 - Radiator Repair Specialist 15.95 05370 - Tire Repairer 11.30 05400 - Transmission Repair Specialist 17.65

07000 - Food Preparation And Service Occupations 07010 - Baker 12.02 07041 - Cook I 9.86 07042 - Cook II 11.39 07070 - Dishwasher 8.94 07130 - Food Service Worker 9.20 07210 - Meat Cutter 15.65 07260 - Waiter/Waitress 9.30 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 15.84 09040 - Furniture Handler 10.52 09080 - Furniture Refinisher 15.84 09090 - Furniture Refinisher Helper 12.95 09110 - Furniture Repairer, Minor 14.06 09130 - Upholsterer 14.97 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 9.89 11060 - Elevator Operator 11.52 11090 - Gardener 15.96 11122 - Housekeeping Aide 11.52 11150 - Janitor 11.52 11210 - Laborer, Grounds Maintenance 12.05 11240 - Maid or Houseman 9.24 11260 - Pruner 11.41 11270 - Tractor Operator 14.63 11330 - Trail Maintenance Worker 12.05 11360 - Window Cleaner 12.90 12000 - Health Occupations 12010 - Ambulance Driver 16.46 12011 - Breath Alcohol Technician 17.71 12012 - Certified Occupational Therapist Assistant 24.30 12015 - Certified Physical Therapist Assistant 22.02 12020 - Dental Assistant 15.71 12025 - Dental Hygienist 31.34 12030 - EKG Technician 26.48 12035 - Electroneurodiagnostic Technologist 26.48 12040 - Emergency Medical Technician 16.46 12071 - Licensed Practical Nurse I 15.83 12072 - Licensed Practical Nurse II 17.71 12073 - Licensed Practical Nurse III 19.75 12100 - Medical Assistant 12.51 12130 - Medical Laboratory Technician 16.27 12160 - Medical Record Clerk 16.62 12190 - Medical Record Technician 18.59 12195 - Medical Transcriptionist 16.23 12210 - Nuclear Medicine Technologist 38.92 12221 - Nursing Assistant I 10.30 12222 - Nursing Assistant II 11.58 12223 - Nursing Assistant III 12.64 12224 - Nursing Assistant IV 14.19 12235 - Optical Dispenser 12.94 12236 - Optical Technician 15.83 12250 - Pharmacy Technician 13.41 12280 - Phlebotomist 14.19 12305 - Radiologic Technologist 23.85 12311 - Registered Nurse I 21.66 12312 - Registered Nurse II 26.49 12313 - Registered Nurse II, Specialist 26.49 12314 - Registered Nurse III 32.05 12315 - Registered Nurse III, Anesthetist 32.05 12316 - Registered Nurse IV 38.41 12317 - Scheduler (Drug and Alcohol Testing) 21.94 12320 - Substance Abuse Treatment Counselor 18.25 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 18.13 13012 - Exhibits Specialist II 22.20 13013 - Exhibits Specialist III 24.99 13041 - Illustrator I 18.13 13042 - Illustrator II 22.20 13043 - Illustrator III 24.99

13047 - Librarian 22.63 13050 - Library Aide/Clerk 12.51 13054 - Library Information Technology Systems 20.44 Administrator 13058 - Library Technician 15.65 13061 - Media Specialist I 14.75 13062 - Media Specialist II 16.49 13063 - Media Specialist III 18.38 13071 - Photographer I 12.54 13072 - Photographer II 15.34 13073 - Photographer III 19.91 13074 - Photographer IV 24.34 13075 - Photographer V 30.59 13090 - Technical Order Library Clerk 15.50 13110 - Video Teleconference Technician 18.05 14000 - Information Technology Occupations 14041 - Computer Operator I 14.31 14042 - Computer Operator II 16.01 14043 - Computer Operator III 17.85 14044 - Computer Operator IV 19.84 14045 - Computer Operator V 21.96 14071 - Computer Programmer I (see 1) 19.31 14072 - Computer Programmer II (see 1) 23.93 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 14.31 14160 - Personal Computer Support Technician 19.84 14170 - System Support Specialist 21.47 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 28.62 15020 - Aircrew Training Devices Instructor (Rated) 34.61 15030 - Air Crew Training Devices Instructor (Pilot) 39.95 15050 - Computer Based Training Specialist / Instructor 28.62 15060 - Educational Technologist 27.51 15070 - Flight Instructor (Pilot) 39.95 15080 - Graphic Artist 20.17 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 37.48 15086 - Maintenance Test Pilot, Rotary Wing 37.48 15088 - Non-Maintenance Test/Co-Pilot 37.48 15090 - Technical Instructor 18.49 15095 - Technical Instructor/Course Developer 22.61 15110 - Test Proctor 14.92 15120 - Tutor 14.92 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 9.72 16030 - Counter Attendant 9.72 16040 - Dry Cleaner 12.51 16070 - Finisher, Flatwork, Machine 9.72 16090 - Presser, Hand 9.72 16110 - Presser, Machine, Drycleaning 9.72 16130 - Presser, Machine, Shirts 9.72 16160 - Presser, Machine, Wearing Apparel, Laundry 9.72 16190 - Sewing Machine Operator 13.44 16220 - Tailor 14.37 16250 - Washer, Machine 10.69 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 17.87 19040 - Tool And Die Maker 21.25 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 14.64 21030 - Material Coordinator 20.98 21040 - Material Expediter 20.98 21050 - Material Handling Laborer 11.59 21071 - Order Filler 11.62 21080 - Production Line Worker (Food Processing) 14.64 21110 - Shipping Packer 14.50 21130 - Shipping/Receiving Clerk 14.50

21140 - Store Worker I 12.91 21150 - Stock Clerk 18.18 21210 - Tools And Parts Attendant 14.64 21410 - Warehouse Specialist 14.64 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 23.51 23019 - Aircraft Logs and Records Technician 19.11 23021 - Aircraft Mechanic I 22.22 23022 - Aircraft Mechanic II 23.51 23023 - Aircraft Mechanic III 24.72 23040 - Aircraft Mechanic Helper 17.13 23050 - Aircraft, Painter 21.05 23060 - Aircraft Servicer 19.11 23070 - Aircraft Survival Flight Equipment Technician 21.05 23080 - Aircraft Worker 20.24 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 20.24 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 22.22

II

23110 - Appliance Mechanic 20.74 23120 - Bicycle Repairer 14.60 23125 - Cable Splicer 33.24 23130 - Carpenter, Maintenance 17.60 23140 - Carpet Layer 20.01 23160 - Electrician, Maintenance 20.20 23181 - Electronics Technician Maintenance I 25.67 23182 - Electronics Technician Maintenance II 27.38 23183 - Electronics Technician Maintenance III 29.44 23260 - Fabric Worker 18.22 23290 - Fire Alarm System Mechanic 21.17 23310 - Fire Extinguisher Repairer 16.97 23311 - Fuel Distribution System Mechanic 21.17 23312 - Fuel Distribution System Operator 16.56 23370 - General Maintenance Worker 16.19 23380 - Ground Support Equipment Mechanic 22.22 23381 - Ground Support Equipment Servicer 19.11 23382 - Ground Support Equipment Worker 20.24 23391 - Gunsmith I 16.97 23392 - Gunsmith II 19.39 23393 - Gunsmith III 21.71 23410 - Heating, Ventilation And Air-Conditioning 19.45 Mechanic 23411 - Heating, Ventilation And Air Contidioning 20.94 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 23.16 23440 - Heavy Equipment Operator 22.52 23460 - Instrument Mechanic 21.71 23465 - Laboratory/Shelter Mechanic 20.69 23470 - Laborer 13.72 23510 - Locksmith 20.74 23530 - Machinery Maintenance Mechanic 24.25 23550 - Machinist, Maintenance 19.34 23580 - Maintenance Trades Helper 15.18 23591 - Metrology Technician I 21.71 23592 - Metrology Technician II 22.62 23593 - Metrology Technician III 23.54 23640 - Millwright 21.71 23710 - Office Appliance Repairer 17.16 23760 - Painter, Maintenance 17.01 23790 - Pipefitter, Maintenance 26.04 23810 - Plumber, Maintenance 23.07 23820 - Pneudraulic Systems Mechanic 21.71 23850 - Rigger 21.71 23870 - Scale Mechanic 19.39 23890 - Sheet-Metal Worker, Maintenance 21.88 23910 - Small Engine Mechanic 18.06 23931 - Telecommunications Mechanic I 24.09 23932 - Telecommunications Mechanic II 25.11 23950 - Telephone Lineman 23.91 23960 - Welder, Combination, Maintenance 16.17

23965 - Well Driller 21.71 23970 - Woodcraft Worker 21.71 23980 - Woodworker 16.93 24000 - Personal Needs Occupations 24550 - Case Manager 13.98 24570 - Child Care Attendant 9.35 24580 - Child Care Center Clerk 13.26 24610 - Chore Aide 9.87 24620 - Family Readiness And Support Services 13.98 Coordinator 24630 - Homemaker 15.27 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 21.71 25040 - Sewage Plant Operator 17.93 25070 - Stationary Engineer 21.71 25190 - Ventilation Equipment Tender 15.61 25210 - Water Treatment Plant Operator 17.93 27000 - Protective Service Occupations 27004 - Alarm Monitor 15.33 27007 - Baggage Inspector 11.94 27008 - Corrections Officer 18.04 27010 - Court Security Officer 17.21 27030 - Detection Dog Handler 16.84 27040 - Detention Officer 18.04 27070 - Firefighter 17.21 27101 - Guard I 11.94 27102 - Guard II 16.84 27131 - Police Officer I 18.60 27132 - Police Officer II 20.68 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 13.06 28042 - Carnival Equipment Repairer 14.12 28043 - Carnival Worker 9.68 28210 - Gate Attendant/Gate Tender 13.14 28310 - Lifeguard 10.83 28350 - Park Attendant (Aide) 14.70 28510 - Recreation Aide/Health Facility Attendant 10.73 28515 - Recreation Specialist 18.21 28630 - Sports Official 11.71 28690 - Swimming Pool Operator 17.18 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 19.63 29020 - Hatch Tender 19.63 29030 - Line Handler 19.63 29041 - Stevedore I 18.35 29042 - Stevedore II 20.77 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 38.39 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 26.47 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 29.15 30021 - Archeological Technician I 16.03 30022 - Archeological Technician II 18.51 30023 - Archeological Technician III 22.93 30030 - Cartographic Technician 22.93 30040 - Civil Engineering Technician 21.41 30051 - Cryogenic Technician I 24.61 30052 - Cryogenic Technician II 27.17 30061 - Drafter/CAD Operator I 16.03 30062 - Drafter/CAD Operator II 18.51 30063 - Drafter/CAD Operator III 20.64 30064 - Drafter/CAD Operator IV 25.40 30081 - Engineering Technician I 13.62 30082 - Engineering Technician II 15.82 30083 - Engineering Technician III 20.33 30084 - Engineering Technician IV 25.19 30085 - Engineering Technician V 30.82 30086 - Engineering Technician VI 37.29 30090 - Environmental Technician 22.93 30095 - Evidence Control Specialist 22.22 30210 - Laboratory Technician 22.70

30221 - Latent Fingerprint Technician I 24.61 30222 - Latent Fingerprint Technician II 27.17 30240 - Mathematical Technician 22.93 30361 - Paralegal/Legal Assistant I 18.48 30362 - Paralegal/Legal Assistant II 22.89 30363 - Paralegal/Legal Assistant III 28.00 30364 - Paralegal/Legal Assistant IV 33.87 30375 - Petroleum Supply Specialist 27.17 30390 - Photo-Optics Technician 22.93 30395 - Radiation Control Technician 27.17 30461 - Technical Writer I 22.22 30462 - Technical Writer II 27.17 30463 - Technical Writer III 32.88 30491 - Unexploded Ordnance (UXO) Technician I 24.40 30492 - Unexploded Ordnance (UXO) Technician II 29.52 30493 - Unexploded Ordnance (UXO) Technician III 35.38 30494 - Unexploded (UXO) Safety Escort 24.40 30495 - Unexploded (UXO) Sweep Personnel 24.40 30501 - Weather Forecaster I 24.61 30502 - Weather Forecaster II 29.93 30620 - Weather Observer, Combined Upper Air Or (see 2) 20.64 Surface Programs 30621 - Weather Observer, Senior (see 2) 22.22 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 29.52 31020 - Bus Aide 12.10 31030 - Bus Driver 16.53 31043 - Driver Courier 14.29 31260 - Parking and Lot Attendant 10.99 31290 - Shuttle Bus Driver 15.41 31310 - Taxi Driver 11.51 31361 - Truckdriver, Light 15.41 31362 - Truckdriver, Medium 16.89 31363 - Truckdriver, Heavy 20.23 31364 - Truckdriver, Tractor-Trailer 20.23 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.39 99030 - Cashier 9.09 99050 - Desk Clerk 9.25 99095 - Embalmer 26.72 99130 - Flight Follower 24.40 99251 - Laboratory Animal Caretaker I 11.03 99252 - Laboratory Animal Caretaker II 12.03 99260 - Marketing Analyst 20.52 99310 - Mortician 26.72 99410 - Pest Controller 14.54 99510 - Photofinishing Worker 12.82 99710 - Recycling Laborer 14.50 99711 - Recycling Specialist 17.60 99730 - Refuse Collector 12.96 99810 - Sales Clerk 12.63 99820 - School Crossing Guard…