Supplemental_Bid_Schedule_-_Roofing.xls

XLS spreadsheet 149 KB Posted Jul 25, 2016

Attached to: IDC Single Award Task Order Contract (SATOC) for Roof Repair/Replacement, Fort Riley, Kansas
Solicitation number: W912DQ-16-R-4025
Issued by: Department of the Army Corps of Engineers Engineering District Kansas City

About this file

From the source

Supplemental Bid Schedule

View the file

Other files

File	Type	Posted
A.07.24_Solicitation_Amendment_0001.pdf	PDF	Aug 19, 2016
W912DQ-16-R-4025_Solicitation.pdf	PDF	Jul 25, 2016

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Supplemental Bid Schedule

Fort Riley Roof Maintenance
Year 1
CLIN	Technical Elements (TEs)	Quantity	UOM	Unit Price	Total
0001-AA	Remove asphalt shingles, underlayment, edge metal, and flashings; up to 2 layers.	1,500	SQ
0001-AB	Remove any type of batten seam, flat seam, or standing seam metal roofing and flashings.	100	SQ
0001-AC	Remove BUR system including gravel, gravel stop or edge metal, flashings, and roof insulation.	200	SQ
0001-AD	Remove MBR system including gravel stop or edge metal, flashings, and roof insulation.	1,500	SQ
0001-AE	Remove mechanically fastened or fully adhered EPDM, PVC or TPO roofing including, gravel stop or edge metal, flashings, and roof insulation.	100	SQ
0001-AF	Replace steel roof deck (match existing design and thickness).	200	SF
0001-AG	Replace any dimension treated lumber. Note - Unit is BF "Board Foot".	1,000	BF
0001-AH	Replace any dimension western red cedar wood trim. Note - Unit is BF "Board Foot".	500	BF
0001-AI	Replace 1/2" CDX plywood roof deck	200	SF
0001-AJ	Replace 5/8" CDX plywood roof deck.	200	SF
0001-AK	Replace 3/4" CDX plywood roof deck.	50	SF
0001-AL	Replace any dimension 1" thick nominal lumber roof deck.	200	SF
0001-AM	Replace any dimension 2" thick nominal lumber roof deck.	200	SF
0001-AN	Install ice dam protection membrane at eaves, valleys, vertical walls, dormers, and penetrations.	250	SQ
0001-AO	Install architectural laminated asphalt shingles including synthetic felt underlayment, starter course, painted galvanized steel edge metal and base flashings, and hip and ridge caps.	1,500	SQ
0001-AP	Install venting base sheet on insulating concrete or poured gypsum deck including all fasteners.	100	SQ
0001-AQ	Install 1" thick R7.14 polyisocyanurate roof insulation board.	50	SQ
0001-AR	Install 1-1/2" thick R10.87 polyisocyanurate roof insulation board.	500	SQ
0001-AS	Install 2" thick R14.29 polyisocyanurate roof insulation board.	50	SQ
0001-AT	Install 2-1/2" thick R16.67 polyisocyanurate roof insulation board.	1,000	SQ
0001-AU	Install 3" thick R21.74 polyisocyanurate roof insulation board.	50	SQ
0001-AV	Install 3-1/2" thick R25 polyisocyanurate roof insulation board.	50	SQ
0001-AW	Install 4" thick R28.58 polyisocyanurate roof insulation board.	50	SQ
0001-AX	Install polyisocyanurate tapered insulation board system.	25,000	BF
0001-AY	Install 1/2" thick asphalt impregnated fiberboard cover board.	1,500	SQ
0001-AZ	Install asphalt built-up 4-ply roofing system including all base flashings.	10	SQ
0001-BA	Install 250 mil. (80 mil. base sheet and 170 mil. cap sheet) modified bitumen membrane roofing system including all base flashings.	1,200	SQ
0001-BB	Install 60 mil. mechanically fastened EPDM roofing system including all base flashings.	25	SQ
0001-BC	Install 60 mil. mechanically fastened PVC roofing system including all base flashings.	25	SQ
0001-BD	Install 60 mil. mechanically fastened TPO roofing system including all base flashings.	25	SQ
0001-BE	Install 60 mil. fully adhered EPDM roofing system including all base flashings.	25	SQ
0001-BF	Install 60 mil. fully adhered PVC roofing system including all base flashings.	25	SQ
0001-BG	Install 60 mil. fully adhered TPO roofing system including all base flashings.	25	SQ
0001-BH	Install batten seam architectural copper roof system including high temperature self-adhering SBS modified bitumen and polyethylene metal roof underlayment.	10	SQ
0001-BI	Install flat seam architectural copper roof system including high temperature self-adhering SBS modified bitumen and polyethylene metal roof underlayment.	10	SQ
0001-BJ	Install standing seam architectural copper roof system including high temperature self-adhering SBS modified bitumen and polyethylene metal roof underlayment.	10	SQ
0001-BK	Replace sealant in concrete or masonry wall control joint: remove deteriorated sealant and backer rod where present; replace new backer rod; replace new sealant; paint joint to match surrounding wall surfaces.	100	LF
0001-BL	Replace aluminum flashing, .032", painted finish.	1,000	SF
0001-BM	Replace copper flashing, 16 oz.	200	SF
0001-BN	Replace EPDM, PVC, or TPO flashing, 60 mil.	200	SF
0001-BO	Replace galvanized steel flashing, 26 ga., painted finish.	1,000	SF
0001-BP	Replace lead flashing, 2.5 lb/sf.	50	SF
0001-BQ	Replace stainless steel flashing, 28 ga.	50	SF
0001-BR	Install 1-1/4" to 4" galvanized steel/neoprene pipe flashing (for asphalt shingle roofs).	100	EA
0001-BS	Install 3" to 8" galvanized steel flue pipe "top hat" flashing (for asphalt shingle roofs).	100	EA
0001-BT	Install 1-1/4" to 4" plumbing vent flashing (complete) in conjunction with roof Installment IAW NRCA Details BUR-18/18S, MB-18/18S, TP-18/18S/18A/18AS, or TS-18/18S/18A/18AS as appropriate.	100	EA
0001-BU	Install roof drain flashing (complete) in conjunction with roof Installment IAW NRCA Details BUR-20/20S, MB-20/20S/20A/20AS, TP-20/20S, or TS-20/20S as appropriate.	50	EA
0001-BV	Install 3" to 8" diameter flue pipe flashing IAW NRCA Details BUR-17/17S/17A/17AS, MB-17/17S/17A/17AS, TP-17/17S, or TS-17/17S as appropriate.	25	EA
0001-BW	Replace aluminum reglet; .025", painted finish.	50	LF
0001-BX	Replace copper reglet, 10 oz.	50	LF
0001-BY	Replace galvanized steel reglet; 30 ga., painted finish.	50	LF
0001-BZ	Replace aluminum termination bar; .125" x 1.0" or equivalent, painted finish.	50	LF
0001-CA	Replace galvanized steel termination bar; .125" x 1.0" or equivalent, painted finish.	25	LF
0001-CB	Replace galvanized steel roof louver, painted finish (for asphalt shingle roofs). Acceptable products include Air Vent, Inc. Airhawk RVGL-50 or RVG-55 and Lomanco, Inc. 750-G.	100	EA
0001-CC	Replace galvanized steel ridge vent, painted finish (for asphalt shingle roofs). Acceptable products include ShingleVent II Shingle Over Ridge Vent SHFV203 and Lomanco, Inc. Shingle Over Ridge Vent LOR9-4.	100	LF
0001-CD	Replace aluminum splash pan (fabricated IAW SMACNA Figure 1-36, approximately 3.3 sf), .040" thick, painted finish.	5	EA
0001-CE	Replace copper splash pan (fabricated IAW SMACNA Figure 1-36, approximately 3.3 sf), 16 oz.	5	EA
0001-CF	Replace galvanized splash pan (fabricated IAW SMACNA Figure 1-36, approximately 3.3 sf), 26 ga., painted finish.	5	EA
0001-CG	Replace aluminum gutter, any box style, .032", 4" wide, painted finish, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	50	LF
0001-CH	Replace aluminum gutter, any box style, .032", 5" wide, painted finish, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	200	LF
0001-CI	Replace aluminum gutter, any box style, .032", 6" wide, painted finish, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	200	LF
0001-CJ	Replace copper gutter, style K or half round, 16 oz., 4" wide, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	50	LF
0001-CK	Replace copper gutter, style K or half round, 16 oz., 5" wide, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	100	LF
0001-CL	Replace copper gutter, style K or half round, 16 oz., 6" wide, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	50	LF
0001-CM	Replace galvanized steel gutter, any box style, 26 ga., 4" wide, painted finish, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	50	LF
0001-CN	Replace galvanized steel gutter, any box style, 26 ga., 5" wide, painted finish, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	200	LF
0001-CO	Replace galvanized steel gutter, any box style, 26 ga., 6" wide, painted finish, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	200	LF
0001-CP	Replace copper gutter brass or stainless steel spring retaining clip only.	100	EA
0001-CQ	Replace aluminum gutter lap or butt type expansion joint, any style or size, painted finish.	40	EA
0001-CR	Replace copper gutter lap or butt type expansion joint, any style or size.	10	EA
0001-CS	Replace galvanized steel gutter lap or butt type expansion joint, any style or size, painted finish.	5	EA
0001-CT	Replace aluminum downspout or elbow, .025", 3" round or 2" by 3", painted finish, including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	100	LF
0001-CU	Replace aluminum downspout or elbow, .025", 4" round or 3" by 4", painted finish, including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	200	LF
0001-CV	Replace aluminum downspout or elbow, .025", 5" round or 4" by 5", painted finish, including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	200	LF
0001-CW	Replace copper downspout or elbow, 16 oz., 3" round or 2" by 3", including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	50	LF
0001-CX	Replace copper downspout or elbow, 16 oz., 4" round or 3" by 4", including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	100	LF
0001-CY	Replace copper downspout or elbow, 16 oz., 5" round or 4" by 5", including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	50	LF
0001-CZ	Replace galvanized steel downspout or elbow, 26 ga., 3" round or 2" by 3", painted finish, including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	100	LF
0001-DA	Replace galvanized steel downspout or elbow, 26 ga., 4" round or 3" by 4", painted finish, including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	200	LF
0001-DB	Replace galvanized steel downspout or elbow, 26 ga., 5" round or 4" by 5", painted finish, including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	200	LF
0001-DC	Reinstall/rehang/realign existing gutter or downspout including Installment of damaged or missing hangers and spring retaining clips.	100	LF
0001-DD	Replace 12" x 36" precast concrete splashblock.	50	EA
0001-DE	Replace pitch pan during roof replacement.	50	EA
0001-DF	Replace neoprene and metal flanges expansion joint or roof to wall joint.	50	LF
0001-DG	Replace all metal expansion joint or roof to wall joint.	100	LF
0001-DH	Extract and rethread broken or damaged roof drain bolts and install new stainless steel bolts.	50	EA
0001-DI	Replace 2" to 4" cast-iron body roof drain or floor scupper including dome.	6	EA
0001-DJ	Replace fixed height roller natural gas or HVAC pipe or electrical conduit support; 2-1/2" min. standoff, up to 3.75" dia. pipe.	25	EA
0001-DK	Replace adjustable height roller gas or HVAC pipe or electrical conduit support; 2-1/2" min. standoff, up to 3.75" dia. pipe.	25	EA
0001-DL	Prepare, prime, and paint concrete, masonry, lumber, plywood, sheet metal, roof accessories, or roof specialties.	1,000	SF
0001-DM	BF-H-1: Repair damaged base flashing by overlaying each localized defect with new base flashing.	200	LF
0001-DN	BF-H-2: Install extension of counterflashing over exposed top termination of base flashing. Install new BUR or MBR roof membrane at open side laps in base flashing.	150	LF
0001-DO	BF-H-3: Remove contaminate and affected base flashing material. Prime surface and install new base flashing.	50	LF
0001-DP	BF-H-4: Prime surface and install new base flashing.	50	LF
0001-DQ	BF-M-1: Cut and resecure unbonded base flashing, mechanically fasten slipped flashing and coat with heavy bodied asphalt coating.	500	LF
0001-DR	BF-M-2: Prime exposed and deteriorated base flashing and coat with heavy bodied asphalt coating.	150	LF
0001-DS	BF-M-3: Remove contaminates from undamaged base flashing, prime and coat areas with heavy bodied asphalt coating.	50	LF
0001-DT	BF-M-4: Remove temporary repair material from base flashing, reinforce patch as necessary and coat with heavy bodied asphalt coating.	50	LF
0001-DU	BL-H-1 & BL-H-2: Remove broken blister, repair surface and restore surfacing material where applicable.	50	SF
0001-DV	BL-M-1 & BL-M-2: Restore surfacing material on blister which has exposed BUR or MBR roof membrane.	150	SF
0001-DW	DR-H-1: Remove deteriorated stripping around roof drain or scupper, clean surface and prime. Replace stripping and restore surfacing material where applicable.	10	EA
0001-DX	DR-H-2: Reinstall loose or replace damaged or missing roof drain clamping ring.	25	EA
0001-DY	DR-H-3: Remove blockage which is clogging roof drain by whatever means are necessary to unclogg drain.	10	EA
0001-DZ	DR-H-4: Replace damaged scupper.	10	EA
0001-EA	DR-M-1: Prime and coat surface of roof drain having exposed stripping with heavy bodied asphalt coating.	10	EA
0001-EB	DR-M-2: Replace damaged or missing roof drain strainer.	10	EA
0001-EC	DR-M-3: Remove all loose paint and corrosion around distressed scupper, prime and coat with corrosion resistant paint.	10	EA
0001-ED	DR-M-4: Remove clamping ring and stripping plies around drain. Clean surface and prime. Install new stripping plies.	10	EA
0001-EE	DS-H-1: Clean and prepare open seam, reseal and overlay with 6" width of BUR or MBR roof membrane.	20	LF
0001-EF	DS-H-2 & DS-M-2: Cut out fishmouths, wrinkles, blistering or ridging in seam, clean and prepare surface and install BUR or MBR roof membrane patch.	20	LF
0001-EG	DS-M-1: Clean and prepare defective seam, reseal lap.	20	LF
0001-EH	DS-M-3: Restore surfacing material on unsurfaced BUR or MBR roof membrane along seam.	20	LF
0001-EI	DV-H-1 & DV-H-2: Remove contaminate or vegetation penetrating membrane, repair BUR or MBR roof membrane and restore surfacing material where applicable.	50	SF
0001-EJ	DV-M-1 & DV-M-3: Remove dirt, vegetation, foreign material and objects from roof.	500	SF
0001-EK	DV-M-2: Remove contaminate from undamaged BUR or MBR roof membrane and restore surfacing material where applicable.	100	SF
0001-EL	EM-H-1, EM-H-2, & EM-H-3: Prime and apply stripping ply over edge metal flange in area of loose or missing stripping plies, or over edge metal joints which are split or where damaged has occurred.	500	LF
0001-EM	EM-H-4: Replace section of damaged edge metal.	50	LF
0001-EN	EM-H-5: Refasten loose edge metal flange into solid support. Replace stripping and surfacing material where applicable.	250	LF
0001-EO	EM-H-6: Clean interior of gutter to smooth bare metal and line gutter with waterproof membrane.	50	LF
0001-EP	EM-M-2: Restore surfacing over exposed stripping plies at edge metal.	50	LF
0001-EQ	EM-M-3: Remove loose nails in embedded edge metal and renail into solid support. Install new BUR or MBR roof membrane over new fasteners.	50	LF
0001-ER	EM-M-4: Remove surface corrosion, prime and coat edge metal with corrosion resistant paint.	50	LF
0001-ES	EM-M-5: Renail loose edge metal flange into solid support. Install new BUR or MBR roof membrane (stripping plies) over new fasteners.	150	LF
0001-ET	EQ-H-1: Repair damaged BUR or MBR roof membrane under improper equipment or piping support and install appropriate equipment or piping support device.	10	SF
0001-EU	EQ-H-2 & EQ-M-2: Install/replace pitch pan at equipment support and flash into BUR or MBR roof membrane.	10	SF
0001-EV	EQ-M-1: Replace improper equipment or piping support with support device allowing for movement of equipment or piping.	20	SF
0001-EW	FP-H-1: Clean, prime and seal unflashed flanges on flashed penetration.	10	LF
0001-EX	FP-H-2 & FP-H-3: Replace damaged or missing flashing sleeve or curb on flashed penetration. (1 Flashing Sleeve = 1 LF.)	10	LF
0001-EY	FP-H-4: Prime surface and apply BUR or MBR roof membrane (stripping plies) around unsealed flashed penetration.	20	LF
0001-EZ	FP-H-5: Prime and apply BUR or MBR roof membrane (stripping plies) over flashing sleeve where damage has occurred.	20	LF
0001-FA	FP-M-1: Restore surfacing over exposed stripping plies around flashed penetration.	10	LF
0001-FB	FP-M-2: Seal top of flashing sleeve around flashed penetration. (1 Flashing Sleeve = 1 LF.)	10	LF
0001-FC	FP-M-3: Replace a damaged or missing rain collar or "umbrella" on flashed penetration. (1 Rain Collar or "Umbrella" = 1 LF.)	10	LF
0001-FD	FP-M-4: Remove surface corrosion, prime and coat with corrosion resistant material.	10	LF
0001-FE	HL-H-1: Repair holes in BUR or MBR roof membrane and restore surfacing where applicable.	50	SF
0001-FF	IN-H-1: Remove BUR or MBR roof membrane, remove wet insulation, allow area to dry, install new insulation and BUR or MBR roof membrane to match existing.	100	SF
0001-FG	MC-H-1 & MC-M-4: Reinstall displaced metal counterflashing in its original location.	100	LF
0001-FH	MC-H-2: Replace deteriorated or missing metal counterflashing.	40	LF
0001-FI	MC-H-3: Replace deteriorated or missing joint covers on metal coping cap.	40	LF
0001-FJ	MC-M-1: Clean and patch holes in metal counterflashing and coat entire surface with corrosion resistant paint.	500	LF
0001-FK	MC-M-2: Reseal failed joints in metal coping cap and reattach.	40	LF
0001-FL	MC-M-3: Replace deteriorated sealant at counterflashing and reglet or termination bar.	50	LF
0001-FM	MC-M-5: Add extension or replace counterflashing to cover top of base flashing.	40	LF
0001-FN	PA-H-1 & PA-M-1: Replace distressed or poor quality patch with new BUR or MBR roof membrane and restore surfacing material where applicable.	150	SF
0001-FO	PP-H-1: Remove all corrosion, prime and coat corroded pitch pan with corrosion resistant paint.	10	EA
0001-FP	PP-H-2 & PP-H-4: Remove existing sealant and refill pitch pan with sealant and crown to assure moisture runoff.	20	EA
0001-FQ	PP-H-3: Prime and apply stripping plies around pitch pans having deteriorated stripping.	10	EA
0001-FR	RG-H-1: Repair breaks in the ridges and restore surfacing material where applicable.	50	LF
0001-FS	RG-H-2: Remove broken ridges, repair BUR or MBR roof membrane and restore surfacing material where applicable.	50	LF
0001-FT	RG-M-1 & RG-M-2: Restore surfacing material on ridges or seams on ridges which have exposed felts or membrane.	50	LF
0001-FU	SL-H-1: Remove BUR or MBR roof membrane irregularities in area of slippage, fasten and repair membrane and restore surfacing material where applicable.	50	SF
0001-FV	SP-H-1: Repair splits and restore surfacing material where applicable.	50	LF
0001-FW	SR-H-1: On aggregate surfaced roofs, repair deteriorated ply sheet and restore surfacing material.	50	SF
0001-FX	SR-H-2 & SR-H-3: On mineral surfaced-cap sheet roofs or smooth liquid applied surfacing, repair deteriorated roof membrane surfaces and restore surfacing material.	1,000	SF
0001-FY	SR-H-4 & SR-M-4: On smooth liquid applied surfacing, repair roof membrane where alligator cracks extend down to reinforcement and recoat with asphalt.	50	SF
0001-FZ	SR-H-5: On metal foil surfacing, remove loose foil, repair deteriorated membrane and apply appropriate coating.	50	SF
0001-GA	SR-H-6: Remove walkway, repair damaged BUR or MBR roof membrane and replace walkway.	50	SF
0001-GB	SR-M-1: On aggregate surfaced roofs, reinstall aggregate on exposed BUR membrane surfaces.	50	SF
0001-GC	SR-M-2: On mineral surfaced-cap sheet roofs, restore mineral granules on exposed MBR membrane surfaces.	150	SF
0001-GD	SR-M-3: On smooth liquid applied surfacing, coat exposed surfaces with asphalt emulsion.	50	SF
0001-GE	SR-M-5: On metal foil surfacing, remove loose foil, clean exposed membrane and apply appropriate coating.	50	SF
0001-GF	SR-M-6: On unsurfaced membranes, apply asphalt emulsion coating to deteriorated surface.	50	SF
0001-GG	BC-H-1: Clean and prepare surface at hole in coated metal base flashing; patch with EPMD, PVC, or TPO stripping membrane and seal edges.	50	LF
0001-GH	BC-H-2: Remove and replace joint cover at coated metal base flashing, cover with EPDM, PVC, or TPO stripping membrane and seal edges.	50	LF
0001-GI	BC-H-3 & BC-M-3: Resecure top of coated metal base flashing to vertical surface, seal fasteners, and resecure counterflashing.	100	LF
0001-GJ	BC-H-4: Remove and replace displaced section of coated metal base flashing.	25	LF
0001-GK	BC-M-1: Remove unbonded stripping at joint cover of coated metal base flashing. Fasten joint cover and restrip to EPDM, PVC, or TPO roof membrane.	25	LF
0001-GL	BC-M-2: Remove loose fasteners in coated metal base flashing, replace and seal.	25	LF
0001-GM	BC-M-4: Replace embrittled joint stripping on coated metal base flashing and seal edges.	50	LF
0001-GN	BC-M-5: Remove dissimilar repair of coated metal base flashing, patch with EPDM, PVC, or TPO stripping membrane and seal edges.	25	LF
0001-GO	BF-H-1 & BF-H-2: Clean and prepare damaged or deteriorated surface of base flashing, overlay with EPDM, PVC, or TPO roof membrane patch, and seal edges.	50	LF
0001-GP	BF-H-3: Seal top of base flashing with new termination bar.	25	LF
0001-GQ	BF-H-4: Clean and prepare surface at open side lap of base flashing, overlay with EPDM, PVC, or TPO roof membrane patch and seal edges.	50	LF
0001-GR	BF-H-5: Remove contaminate and affected base flashing, clean and prepare surface, overlay with EPDM, PVC, or TPO roof membrane patch and seal edges.	50	LF
0001-GS	BF-M-1: Prepare surface of base flashing and install two coats of a compatible EPDM, PVC, or TPO roof membrane repair coating.	25	LF
0001-GT	BF-M-2: Prepare surface of base flashing, peel back and reglue. Fasten top edge.	25	LF
0001-GU	BF-M-3: Remove contaminated base flashing, prepare surface and install new base flashing.	25	LF
0001-GV	BF-M-4: Remove dissimilar repair material on base flashing and replace with new base flashing material.	25	LF
0001-GW	BF-M-5: Clean and prepare surface, reglue seam and seal edge.	25	LF
0001-GX	BF-M-6: Replace deteriorated or missing termination bar for base flashing.	25	LF
0001-GY	BF-M-7: Replace missing nailing strip for base flashing, clean and prepare surface and seal with 6" width EPDM, PVC, or TPO stripping membrane.	25	LF
0001-GZ	DR-H-1 & DR-H-5: Replace damaged or deteriorated EPDM, PVC, or TPO stripping membrane at roof drain or scupper.	8	EA
0001-HA	DR-H-2: Reseal stripping edge around roof drain and restrip with new EPDM, PVC, or TPO stripping membrane.	4	EA
0001-HB	DR-H-3: Reinstall loose or replace damaged or missing roof drain clamping ring.	4	EA
0001-HC	DR-H-4: Remove blockage which is clogging roof drain by whatever means are necessary to unclogg drain.	4	EA
0001-HD	DR-H-6: Seal holes in stripping membrane by overlaying with new EPDM, PVC, or TPO roof membrane at roof drain or scupper.	4	EA
0001-HE	DR-M-1: Clean and prepare crazed stripping around roof drain. Coat damaged stripping with two coats of a compatible EPDM, PVC, or TPO roof membrane repair coating.	4	EA
0001-HF	DR-M-2: Clean and prepare stripping around roof drain and seal opening in stripping seam.	4	EA
0001-HG	DR-M-3: Replace damaged or missing roof drain strainer.	4	EA
0001-HH	DR-M-4: Remove all loose paint and corrosion on scupper, prime and coat with corrosion resistant paint.	4	EA
0001-HI	DR-M-5: Remove 3' by 3' area of roof membrane at roof drain. Clean and prepare surface. Install new EPDM, PVC, or TPO roof membrane.	4	EA
0001-HJ	DS-H-1: Clean and prepare open seam, reseal and overlay with 6" width of EPDM, PVC, or TPO roof membrane.	50	LF
0001-HK	DS-H-2 & DS-M-2: Cut out wrinkles in seam, clean and prepare surface, and install EPDM, PVC, or TPO roof membrane patch.	50	LF
0001-HL	DS-M-1: Clean and prepare defective seam, reseal lap and seal seam edge.	50	LF
0001-HM	DV-H-1 & DV-H-2: Remove vegetation which is penetrating membrane or chemically damaged membrane. Clean and prepare surface and install EPDM, PVC, or TPO roof membrane patch over repair area.	50	SF
0001-HN	DV-M-1 & DV-M-3: Remove dirt, vegetation, foreign material and objects from roof.	100	SF
0001-HO	DV-M-2: Remove chemically damaged roof membrane, clean and prepare surface and install EPDM, PVC, or TPO roof membrane patch over repair area.	50	SF
0001-HP	EM-H-1: Replace damaged EPDM, PVC, or TPO roof membrane stripping material at edge metal.	50	LF
0001-HQ	EM-H-2: Replace damaged or deteriorated joint cover on edge material. Strip into EPDM, PVC, or TPO roof membrane.	50	LF
0001-HR	EM-H-3: Replace section of damaged or deteriorated edge metal. Strip into EPDM, PVC, or TPO roof membrane.	50	LF
0001-HS	EM-H-4 & EM-M-5: Remove damaged or deteriorated edge stripping, refasten edge metal, and restrip to EPDM, PVC, or TPO roof membrane.	50	LF
0001-HT	EM-H-5 & EM-M-7: Clean interior of gutter to smooth metal. Line with waterproof membrane.	50	LF
0001-HU	EM-H-6: Clean and prepare unbonded coated edge metal. Seal to EPDM, PVC, or TPO roof membrane.	50	LF
0001-HV	EM-M-1: Remove stripping on edge metal and refasten joint cover. Install new EPDM, PVC, or TPO roof membrane stripping.	50	LF
0001-HW	EM-M-2: Remove edge metal stripping which covers backed-out fasteners and replace with new fasteners. Install new EPDM, PVC, or TPO roof membrane stripping.	50	LF
0001-HX	EM-M-3: Clean and prepare crazed stripping edge metal. Surface with two coats of a compatible EPDM, PVC, or TPO roof membrane repair coating.	50	LF
0001-HY	EM-M-4: Clean and prepare unbonded stripping on edge metal, and seal opening in EPDM, PVC, or TPO stripping seam.	25	LF
0001-HZ	EM-M-6: Replace embrittled joint stripping at edge metal.	25	LF
0001-IA	EM-M-8: Clean and prepare unbonded coated edge metal. Seal to EPDM, PVC, or TPO roof membrane.	25	LF
0001-IB	EQ-H-1: Repair damaged EPDM, PVC, or TPO roof membrane under improper equipment or piping support and install appropriate equipment or piping support device.	4	SF
0001-IC	EQ-H-2 & EQ-M-2: Install/replace pitch pan at equipment support and flash into EPDM, PVC, or TPO roof membrane.	8	SF
0001-ID	EQ-M-1: Replace improper equipment or piping support with support device allowing for movement of equipment or piping.	4	SF
0001-IE	FP-H-1: Remove damaged stripping at flashed penetration and replace with new EPDM, PVC, or TPO roof membrane stripping.	4	LF
0001-IF	FP-H-2 & FP-M-2: Clean and prepare area and seal opening in stripping seam of flashed penetration.	8	LF
0001-IG	FP-H-3, FP-H-4, & FP-H-5: Replace damaged, imcompatible, or missing flashing sleeve.	12	LF
0001-IH	FP-M-1: Clean and prepare crazed stripping of flashed penetration. Coat damaged stripping with two coats of a compatible EPDM, PVC, or TPO roof membrane repair coating.	4	LF
0001-II	FP-M-3: Seal top of flashing sleeve around flashed penetration.	4	LF
0001-IJ	FP-M-4: Replace damaged or missing clamping band on flashing sleeve.	4	LF
0001-IK	FP-M-5: Replace damaged or missing rain collar or "umbrella" on flashed penetration.	4	LF
0001-IL	FP-M-6: Remove corrosion, prime and coat metal of flashed penetration.	4	LF
0001-IM	HL-H-1: Clean and prepare area and overlay with new EPDM, PVC, or TPO roof membrane.	50	SF
0001-IN	HL-H-2: Remove loose fasteners, replace and install EPDM, PVC, or TPO roof membrane patch.	50	SF
0001-IO	HL-M-1: Clean and prepare surface and coat damaged area of membrane with two coats of a compatible EPDM, PVC, or TPO roof membrane repair coating.	50	SF
0001-IP	MC-H-1 & MC-H-5: Reinstall displaced metal counterflashing.	50	LF
0001-IQ	MC-H-2: Replace deteriorated or missing metal counterflashing.	25	LF
0001-IR	MC-H-3: Replace deteriorated or missing joint cover on metal counterflashing.	25	LF
0001-IS	MC-H-4: Replace sealant at counterflashing and reglet or termination bar.	25	LF
0001-IT	MC-H-6: Add extension to counterflashing to cover top of base flashing.	25	LF
0001-IU	MC-M-1: Clean and patch holes in metal counterflashing and coat surface with corrosion resistant paint.	25	LF
0001-IV	MC-M-2: Remove loose fasteners and install new fasteners. Reseal failed joints in metal counterflashing.	25	LF
0001-IW	MC-M-3: Raise counterflashing, install EPDM, PVC, or TPO protection roof membrane material and reinstall counterflashing.	25	LF
0001-IX	MD-H-1: Clean and prepare deteriorated membrane. Overlay with new EPDM, PVC, or TPO roof membrane.	50	SF
0001-IY	MD-M-1: Clean and prepare eroded membrane and coat damaged area with two coats of a compatible EPDM, PVC, or TPO roof membrane repair coating.	50	SF
0001-IZ	MS-M-1: Cut membrane over gaps in underlying insulation. Fill gaps, clean and prepare surface and overlay repair area with EPDM, PVC, or TPO roof membrane patch.	50	SF
0001-JA	MS-M-2: Cut membrane, rearrange displaced insulation, clean and prepare surface and overlay repair area with EPDM, PVC, or TPO roof membrane patch.	25	SF
0001-JB	MS-M-3: Cut membrane over underlying lump and remove foreign material. Clean and prepare surface and overlay repair area with EPDM, PVC, or TPO roof membrane patch.	25	SF
0001-JC	PA-H-1 & PA-M-1: Remove distressed or imcompatible patch and repair with EPDM, PVC, or TPO roof membrane patch.	100	SF
0001-JD	PD-M-1: Remove wrinkled membrane blocking drainage, clean and prepare surface and install EPDM, PVC, or TPO roof membrane patch.	50	SF
0001-JE	PD-M-2: Cut membrane over underlying bowed insulation, remove insulation and replace. Clean and prepare surface and patch repair with new EPDM, PVC, or TPO roof membrane.	50	SF
0001-JF	PP-H-1: Remove damaged stripping around pitch pan and install new EPDM, PVC, or TPO roof membrane stripping.	4	EA
0001-JG	PP-H-2: Reseal stripping edge around pitch pan and restrip with new EPDM, PVC, or TPO roof membrane material.	4	EA
0001-JH	PP-H-3 & PP-H-4: Remove deteriorated sealant and refill pitch pan with sealant and crown to assure moisture runoff.	8	EA
0001-JI	PP-H-5 & PP-M-4: Replace pitch pan and flash into EPDM, PVC, or TPO roof membrane.	8	EA
0001-JJ	PP-M-1: Clean and prepare crazed stripping around pitch pan. Coat damaged stripping with two coats of a compatible EPDM, PVC, or TPO roof membrane repair coating.	4	EA
0001-JK	PP-M-2: Clean and prepare stripping around pitch pan and seal opening in stripping seam.	4	EA
0001-JL	PP-M-3: Remove corrosion, prime and coat corroded pitch pan with corrosion resistant paint.	4	EA
0001-JM	RG-H-1: Remove ridge. Clean and prepare area and overlay with 9" width of EPDM, PVC, or TPO roof membrane.	50	LF
0001-JN	SC-M-1: Clean and prepare surface, coat with Hypalon and reembed sand surfacing.	50	SF
0001-JO	SP-H-1: Clean and prepare area around split, overlay with 9" width of EPDM, PVC, or TPO roof membrane.	50	LF
0001-JP	SS-H-1 & SS-M-1: Cut unadhered membrane, clean and prepare surface, readhere and install EPDM, PVC, or TPO roof membrane patch over repair area.	100	SF
0001-JQ	SS-H-2 & SS-M-2: Remove loose fasteners, install new fasteners and install EPDM, PVC, or TPO roof membrane patch over repair area.	100	SF
0001-JR	SS-H-3 & SS-M-3: Install screws and plates within loose area of membrane, and overlay repair with EPDM, PVC, or TPO roof membrane patch.	100	SF
0001-JS	SS-H-4 & SS-M-4: Redistribute ballast in areas where ballasted EPDM, PVC, or TPO roof membrane is exposed.	100	SF
Items (1001-AA thru 1001-JS) Sub Total
Year 2
CLIN	Technical Elements (TEs)	Quantity	UOM	Unit Price	Total
1001-AA	Remove asphalt shingles, underlayment, edge metal, and flashings; up to 2 layers.	1,500	SQ
1001-AB	Remove any type of batten seam, flat seam, or standing seam metal roofing and flashings.	100	SQ
1001-AC	Remove BUR system including gravel, gravel stop or edge metal, flashings, and roof insulation.	200	SQ
1001-AD	Remove MBR system including gravel stop or edge metal, flashings, and roof insulation.	1,500	SQ
1001-AE	Remove mechanically fastened or fully adhered EPDM, PVC or TPO roofing including, gravel stop or edge metal, flashings, and roof insulation.	100	SQ
1001-AF	Replace steel roof deck (match existing design and thickness).	200	SF
1001-AG	Replace any dimension treated lumber. Note - Unit is BF "Board Foot".	1,000	BF
1001-AH	Replace any dimension western red cedar wood trim. Note - Unit is BF "Board Foot".	500	BF
1001-AI	Replace 1/2" CDX plywood roof deck	200	SF
1001-AJ	Replace 5/8" CDX plywood roof deck.	200	SF
1001-AK	Replace 3/4" CDX plywood roof deck.	50	SF
1001-AL	Replace any dimension 1" thick nominal lumber roof deck.	200	SF
1001-AM	Replace any dimension 2" thick nominal lumber roof deck.	200	SF
1001-AN	Install ice dam protection membrane at eaves, valleys, vertical walls, dormers, and penetrations.	250	SQ
1001-AO	Install architectural laminated asphalt shingles including synthetic felt underlayment, starter course, painted galvanized steel edge metal and base flashings, and hip and ridge caps.	1,500	SQ
1001-AP	Install venting base sheet on insulating concrete or poured gypsum deck including all fasteners.	100	SQ
1001-AQ	Install 1" thick R7.14 polyisocyanurate roof insulation board.	50	SQ
1001-AR	Install 1-1/2" thick R10.87 polyisocyanurate roof insulation board.	500	SQ
1001-AS	Install 2" thick R14.29 polyisocyanurate roof insulation board.	50	SQ
1001-AT	Install 2-1/2" thick R16.67 polyisocyanurate roof insulation board.	1,000	SQ
1001-AU	Install 3" thick R21.74 polyisocyanurate roof insulation board.	50	SQ
1001-AV	Install 3-1/2" thick R25 polyisocyanurate roof insulation board.	50	SQ
1001-AW	Install 4" thick R28.58 polyisocyanurate roof insulation board.	50	SQ
1001-AX	Install polyisocyanurate tapered insulation board system.	25,000	BF
1001-AY	Install 1/2" thick asphalt impregnated fiberboard cover board.	1,500	SQ
1001-AZ	Install asphalt built-up 4-ply roofing system including all base flashings.	10	SQ
1001-BA	Install 250 mil. (80 mil. base sheet and 170 mil. cap sheet) modified bitumen membrane roofing system including all base flashings.	1,200	SQ
1001-BB	Install 60 mil. mechanically fastened EPDM roofing system including all base flashings.	25	SQ
1001-BC	Install 60 mil. mechanically fastened PVC roofing system including all base flashings.	25	SQ
1001-BD	Install 60 mil. mechanically fastened TPO roofing system including all base flashings.	25	SQ
1001-BE	Install 60 mil. fully adhered EPDM roofing system including all base flashings.	25	SQ
1001-BF	Install 60 mil. fully adhered PVC roofing system including all base flashings.	25	SQ
1001-BG	Install 60 mil. fully adhered TPO roofing system including all base flashings.	25	SQ
1001-BH	Install batten seam architectural copper roof system including high temperature self-adhering SBS modified bitumen and polyethylene metal roof underlayment.	10	SQ
1001-BI	Install flat seam architectural copper roof system including high temperature self-adhering SBS modified bitumen and polyethylene metal roof underlayment.	10	SQ
1001-BJ	Install standing seam architectural copper roof system including high temperature self-adhering SBS modified bitumen and polyethylene metal roof underlayment.	10	SQ
1001-BK	Replace sealant in concrete or masonry wall control joint: remove deteriorated sealant and backer rod where present; replace new backer rod; replace new sealant; paint joint to match surrounding wall surfaces.	100	LF
1001-BL	Replace aluminum flashing, .032", painted finish.	1,000	SF
1001-BM	Replace copper flashing, 16 oz.	200	SF
1001-BN	Replace EPDM, PVC, or TPO flashing, 60 mil.	200	SF
1001-BO	Replace galvanized steel flashing, 26 ga., painted finish.	1,000	SF
1001-BP	Replace lead flashing, 2.5 lb/sf.	50	SF
1001-BQ	Replace stainless steel flashing, 28 ga.	50	SF
1001-BR	Install 1-1/4" to 4" galvanized steel/neoprene pipe flashing (for asphalt shingle roofs).	100	EA
1001-BS	Install 3" to 8" galvanized steel flue pipe "top hat" flashing (for asphalt shingle roofs).	100	EA
1001-BT	Install 1-1/4" to 4" plumbing vent flashing (complete) in conjunction with roof Installment IAW NRCA Details BUR-18/18S, MB-18/18S, TP-18/18S/18A/18AS, or TS-18/18S/18A/18AS as appropriate.	100	EA
1001-BU	Install roof drain flashing (complete) in conjunction with roof Installment IAW NRCA Details BUR-20/20S, MB-20/20S/20A/20AS, TP-20/20S, or TS-20/20S as appropriate.	50	EA
1001-BV	Install 3" to 8" diameter flue pipe flashing IAW NRCA Details BUR-17/17S/17A/17AS, MB-17/17S/17A/17AS, TP-17/17S, or TS-17/17S as appropriate.	25	EA
1001-BW	Replace aluminum reglet; .025", painted finish.	50	LF
1001-BX	Replace copper reglet, 10 oz.	50	LF
1001-BY	Replace galvanized steel reglet; 30 ga., painted finish.	50	LF
1001-BZ	Replace aluminum termination bar; .125" x 1.0" or equivalent, painted finish.	50	LF
1001-CA	Replace galvanized steel termination bar; .125" x 1.0" or equivalent, painted finish.	25	LF
1001-CB	Replace galvanized steel roof louver, painted finish (for asphalt shingle roofs). Acceptable products include Air Vent, Inc. Airhawk RVGL-50 or RVG-55 and Lomanco, Inc. 750-G.	100	EA
1001-CC	Replace galvanized steel ridge vent, painted finish (for asphalt shingle roofs). Acceptable products include ShingleVent II Shingle Over Ridge Vent SHFV203 and Lomanco, Inc. Shingle Over Ridge Vent LOR9-4.	100	LF
1001-CD	Replace aluminum splash pan (fabricated IAW SMACNA Figure 1-36, approximately 3.3 sf), .040" thick, painted finish.	5	EA
1001-CE	Replace copper splash pan (fabricated IAW SMACNA Figure 1-36, approximately 3.3 sf), 16 oz.	5	EA
1001-CF	Replace galvanized splash pan (fabricated IAW SMACNA Figure 1-36, approximately 3.3 sf), 26 ga., painted finish.	5	EA
1001-CG	Replace aluminum gutter, any box style, .032", 4" wide, painted finish, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	50	LF
1001-CH	Replace aluminum gutter, any box style, .032", 5" wide, painted finish, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	200	LF
1001-CI	Replace aluminum gutter, any box style, .032", 6" wide, painted finish, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	200	LF
1001-CJ	Replace copper gutter, style K or half round, 16 oz., 4" wide, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	50	LF
1001-CK	Replace copper gutter, style K or half round, 16 oz., 5" wide, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	100	LF
1001-CL	Replace copper gutter, style K or half round, 16 oz., 6" wide, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	50	LF
1001-CM	Replace galvanized steel gutter, any box style, 26 ga., 4" wide, painted finish, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	50	LF
1001-CN	Replace galvanized steel gutter, any box style, 26 ga., 5" wide, painted finish, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	200	LF
1001-CO	Replace galvanized steel gutter, any box style, 26 ga., 6" wide, painted finish, including gutter end caps, miters, and brackets and spacers 2'-8" o.c.	200	LF
1001-CP	Replace copper gutter brass or stainless steel spring retaining clip only.	100	EA
1001-CQ	Replace aluminum gutter lap or butt type expansion joint, any style or size, painted finish.	40	EA
1001-CR	Replace copper gutter lap or butt type expansion joint, any style or size.	10	EA
1001-CS	Replace galvanized steel gutter lap or butt type expansion joint, any style or size, painted finish.	5	EA
1001-CT	Replace aluminum downspout or elbow, .025", 3" round or 2" by 3", painted finish, including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	100	LF
1001-CU	Replace aluminum downspout or elbow, .025", 4" round or 3" by 4", painted finish, including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	200	LF
1001-CV	Replace aluminum downspout or elbow, .025", 5" round or 4" by 5", painted finish, including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	200	LF
1001-CW	Replace copper downspout or elbow, 16 oz., 3" round or 2" by 3", including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	50	LF
1001-CX	Replace copper downspout or elbow, 16 oz., 4" round or 3" by 4", including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	100	LF
1001-CY	Replace copper downspout or elbow, 16 oz., 5" round or 4" by 5", including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	50	LF
1001-CZ	Replace galvanized steel downspout or elbow, 26 ga., 3" round or 2" by 3", painted finish, including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	100	LF
1001-DA	Replace galvanized steel downspout or elbow, 26 ga., 4" round or 3" by 4", painted finish, including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	200	LF
1001-DB	Replace galvanized steel downspout or elbow, 26 ga., 5" round or 4" by 5", painted finish, including gutter outlets and downspout brackets 10’-0” o.c. (1 lf of downspout is equivalent to 1 elbow).	200	LF
1001-DC	Reinstall/rehang/realign existing gutter or downspout including Installment of damaged or missing hangers and spring retaining clips.	100	LF
1001-DD	Replace precast concrete splashblock.	50	EA
1001-DE	Replace pitch pan during roof replacement.	50	EA
1001-DF	Replace neoprene and metal flanges expansion joint or roof to wall joint.	50	LF
1001-DG	Replace all metal expansion joint or roof to wall joint.	100	LF
1001-DH	Extract and rethread broken or damaged roof drain bolts and install new stainless steel bolts.	50	EA
1001-DI	Replace 2" to 4" cast-iron body roof drain or floor scupper including dome.	6	EA
1001-DJ	Replace fixed height roller natural gas or HVAC pipe or electrical conduit support; 2-1/2" min. standoff, up to 3.75" dia. pipe.	25	EA
1001-DK	Replace adjustable height roller gas or HVAC pipe or electrical conduit support; 2-1/2" min. standoff, up to 3.75" dia. pipe.	25	EA
1001-DL	Prepare, prime, and paint concrete, masonry, lumber, plywood, sheet metal, roof accessories, or roof specialties.	1,000	SF
1001-DM	BF-H-1: Repair damaged base flashing by overlaying each localized defect with new base flashing.	200	LF
1001-DN	BF-H-2: Install extension of counterflashing over exposed top termination of base flashing. Install new BUR or MBR roof membrane at open side laps in base flashing.	150	LF
1001-DO	BF-H-3: Remove contaminate and affected base flashing material. Prime surface and install new base flashing.	50	LF
1001-DP	BF-H-4: Prime surface and install new base flashing.	50	LF
1001-DQ	BF-M-1: Cut and resecure unbonded base flashing, mechanically fasten slipped flashing and coat with heavy bodied asphalt coating.	500	LF
1001-DR	BF-M-2: Prime exposed and deteriorated base flashing and coat with heavy bodied asphalt coating.	150	LF
1001-DS	BF-M-3: Remove contaminates from undamaged base flashing, prime and coat areas with heavy bodied asphalt coating.	50	LF
1001-DT	BF-M-4: Remove temporary repair material from base flashing, reinforce patch as necessary and coat with heavy bodied asphalt coating.	50	LF
1001-DU	BL-H-1 & BL-H-2: Remove broken blister, repair surface and restore surfacing material where applicable.	50	SF
1001-DV	BL-M-1 & BL-M-2: Restore surfacing material on blister which has exposed BUR or MBR roof membrane.	150	SF
1001-DW	DR-H-1: Remove deteriorated stripping around roof drain or scupper, clean surface and prime. Replace stripping and restore surfacing material where applicable.	10	EA
1001-DX	DR-H-2: Reinstall loose or replace damaged or missing roof drain clamping ring.	25	EA
1001-DY	DR-H-3: Remove blockage which is clogging roof drain by whatever means are necessary to unclogg drain.	10	EA
1001-DZ	DR-H-4: Replace damaged scupper.	10	EA
1001-EA	DR-M-1: Prime and coat surface of roof drain having exposed stripping with heavy bodied asphalt coating.	10	EA
1001-EB	DR-M-2: Replace damaged or missing roof drain strainer.	10	EA
1001-EC	DR-M-3: Remove all loose paint and corrosion around distressed scupper, prime and coat with corrosion resistant paint.	10	EA
1001-ED	DR-M-4: Remove clamping ring and stripping plies around drain. Clean surface and prime. Install new stripping plies.	10	EA
1001-EE	DS-H-1: Clean and prepare open seam, reseal and overlay with 6" width of BUR or MBR roof membrane.	20	LF
1001-EF	DS-H-2 & DS-M-2: Cut out fishmouths, wrinkles, blistering or ridging in seam, clean and prepare surface and install BUR or MBR roof membrane patch.	20	LF
1001-EG	DS-M-1: Clean and prepare defective seam, reseal lap.	20	LF
1001-EH	DS-M-3: Restore surfacing material on unsurfaced BUR or MBR roof membrane along seam.	20	LF
1001-EI	DV-H-1 & DV-H-2: Remove contaminate or vegetation penetrating membrane, repair BUR or MBR roof membrane and restore surfacing material where applicable.	50	SF
1001-EJ	DV-M-1 & DV-M-3: Remove dirt, vegetation, foreign material and objects from roof.	500	SF
1001-EK	DV-M-2: Remove contaminate from undamaged BUR or MBR roof membrane and restore surfacing material where applicable.	100	SF
1001-EL	EM-H-1, EM-H-2, & EM-H-3: Prime and apply stripping ply over edge metal flange in area of loose or missing stripping plies, or over edge metal joints which are split or where damaged has occurred.	500	LF
1001-EM	EM-H-4: Replace section of damaged edge metal.	50	LF
1001-EN	EM-H-5: Refasten loose edge metal flange into solid support. Replace stripping and surfacing material where applicable.	250	LF
1001-EO	EM-H-6: Clean interior of gutter to smooth bare metal and line gutter with waterproof membrane.	50	LF
1001-EP	EM-M-2: Restore surfacing over exposed stripping plies at edge metal.	50	LF
1001-EQ	EM-M-3: Remove loose nails in embedded edge metal and renail into solid support. Install new BUR or MBR roof membrane over new fasteners.	50	LF
1001-ER	EM-M-4: Remove surface corrosion, prime and coat edge metal with corrosion resistant paint.	50	LF
1001-ES	EM-M-5: Renail loose edge metal flange into solid support. Install new BUR or MBR roof membrane (stripping plies) over new fasteners.	150	LF
1001-ET	EQ-H-1: Repair damaged BUR or MBR roof membrane under improper equipment or piping support and install appropriate equipment or piping support device.	10	SF
1001-EU	EQ-H-2 & EQ-M-2: Install/replace pitch pan at equipment support and flash into BUR or MBR roof membrane.	10	SF
1001-EV	EQ-M-1: Replace improper equipment or piping support with support device allowing for movement of equipment or piping.	20	SF
1001-EW	FP-H-1: Clean, prime and seal unflashed flanges on flashed penetration.	10	LF
1001-EX	FP-H-2 & FP-H-3: Replace damaged or missing flashing sleeve or curb on flashed penetration. (1 Flashing Sleeve = 1 LF.)	10	LF
1001-EY	FP-H-4: Prime surface and apply BUR or MBR roof membrane (stripping plies) around unsealed flashed penetration.	20	LF
1001-EZ	FP-H-5: Prime and apply BUR or MBR roof membrane (stripping plies) over flashing sleeve where damage has occurred.	20	LF
1001-FA	FP-M-1: Restore surfacing over exposed stripping plies around flashed penetration.	10	LF
1001-FB	FP-M-2: Seal top of flashing sleeve around flashed penetration. (1 Flashing Sleeve = 1 LF.)	10	LF
1001-FC	FP-M-3: Replace a damaged or missing rain collar or "umbrella" on flashed penetration. (1 Rain Collar or "Umbrella" = 1 LF.)	10	LF
1001-FD	FP-M-4: Remove surface corrosion, prime and coat with corrosion resistant material.	10	LF
1001-FE	HL-H-1: Repair holes in BUR or MBR roof membrane and restore surfacing where applicable.	50	SF
1001-FF	IN-H-1: Remove BUR or MBR roof membrane, remove wet insulation, allow area to dry, install new insulation and BUR or MBR roof membrane to match existing.	100	SF
1001-FG	MC-H-1 & MC-M-4: Reinstall displaced metal counterflashing in its original location.	100	LF
1001-FH	MC-H-2: Replace deteriorated or missing metal counterflashing.	40	LF
1001-FI	MC-H-3: Replace deteriorated or missing joint covers on metal coping cap.	40	LF
1001-FJ	MC-M-1: Clean and patch holes in metal counterflashing and coat entire surface with corrosion resistant paint.	500	LF
1001-FK	MC-M-2: Reseal failed joints in metal coping cap and reattach.	40	LF
1001-FL	MC-M-3: Replace deteriorated sealant at counterflashing and reglet or termination bar.	50	LF
1001-FM	MC-M-5: Add extension or replace counterflashing to cover top of base flashing.	40	LF
1001-FN	PA-H-1 & PA-M-1: Replace distressed or poor quality patch with new BUR or MBR roof membrane and restore surfacing material where applicable.	150	SF
1001-FO	PP-H-1: Remove all corrosion, prime and coat corroded pitch pan with corrosion resistant paint.	10	EA
1001-FP	PP-H-2 & PP-H-4: Remove existing sealant and refill pitch pan with sealant and crown to assure moisture runoff.	20	EA
1001-FQ	PP-H-3: Prime and apply stripping plies around pitch pans having deteriorated stripping.	10	EA
1001-FR	RG-H-1: Repair breaks in the ridges and restore surfacing material where applicable.	50	LF
1001-FS	RG-H-2: Remove broken ridges, repair BUR or MBR roof membrane and restore surfacing material where applicable.	50	LF
1001-FT	RG-M-1 & RG-M-2: Restore surfacing material on ridges or seams on ridges which have exposed felts or membrane.	50	LF
1001-FU	SL-H-1: Remove BUR or MBR roof membrane irregularities in area of slippage, fasten and repair membrane and restore surfacing material where applicable.	50	SF
1001-FV	SP-H-1: Repair splits and restore surfacing material where applicable.	50	LF
1001-FW	SR-H-1: On aggregate surfaced roofs, repair deteriorated ply sheet and restore surfacing material.	50	SF
1001-FX	SR-H-2 & SR-H-3: On mineral surfaced-cap sheet roofs or smooth liquid applied surfacing, repair deteriorated roof membrane surfaces and restore surfacing material.	1,000	SF
1001-FY	SR-H-4 & SR-M-4: On smooth liquid applied surfacing, repair roof membrane where alligator cracks extend down to reinforcement and recoat with asphalt.	50	SF
1001-FZ	SR-H-5: On metal foil surfacing, remove loose foil, repair deteriorated membrane and apply appropriate coating.	50	SF

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 14, 2017.