AMENDMENT_0001_Edited.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

1. The proposal submission date is extended from 23 AUG 2017, 3:00 PM to 24 AUG 2017, 3:00 PM. Contractors must acknow ledge this Amendment as stated in Item 11. above.

See attached, Contractor Questions along w ith Government Answ ers.

1. CONTRACT ID CODE PAGE OF PAGES

S 1 10

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W912D1-17-R-0010

X 9B. DATED (SEE ITEM 11)

26-Jul-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

08-Aug-2017

CODE

408TH CSB - KUWAIT

BLDG T-346

REDBALL EXPRESSWAY

APO AE 09366

W912D1 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912D1-17-R-0010

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

2. Contractor question:

FACTOR 1: Experience

First paragraph under the section FACTOR 1: Experience on page 27 of the Solicitation states that –

‘Each offeror’s experience will be examined for the type of work performed in the construction range of $25,000.00 and $1,000,000.00 in Kuwait. The successful offeror(s) will possess demonstrated experience performing construction projects including new construction, and the alteration, renovation, conversion, and/or reconfiguration of existing facilities including vertical and horizontal construction.

However, in the last paragraph under the section FACTOR 1: Experience (on page 27 of the Solicitation) it states that –

‘The offeror shall submit no more than five (5) projects that have been completed, within the past five

(5) years immediately preceding the date of this solicitation or are currently being performed that is at least 75% of construction completed. At least one (1) project should have a dollar value greater than $25,000.00 but less than $1 million and one (1) project must have been performed in Kuwait, failure to provide a minimum of two (2) projects will be deemed unacceptable. If more than five (5) projects are submitted for this factor, only the first five (5) found in order in the proposal will be evaluated’

Does the highlighted statement imply that we can submit projects exceeding the $1 million range for submission under Experience or do all submissions under this Factor have to be within the range of $25,000-$1 million?

2. Government Answer:

The contractor shall submit at least two (2) projects, but not more than five (5) projects in the last five

(5) years. The government anticipates projects from $25,000.00 to not more than $1,000,000.00. You may submit projects with a higher dollar value if you not have projects in the anticipated dollar range.

3. Contractor question:

Page Limit: We understand page limit for Volume 1 – Technical is limited to twenty-five (25) pages per Factor including Subfactors.

Please confirm page limit for submission under Volume 3 - Task Order - Seed Project - Zone 6, PCB Buildout Phase that would include project execution Plan, schedule of major milestones, detail order lead time for materials, cover long lead items, badging plan, subcontractors proposed with letter of commitment, complete organization staff, personnel, Quality control & Safety plans.

3. Government Answer:

There is no page limit for the Seed Project. However, all pages submitted for the Seed Project shall directly address the project.

4. Contractor question:

The deadline for any queries regarding this MATOC is set for 7th August 2017. In the event are representatives, have any queries after attending the Site Visit, when will those be clarified?

4. Government Answer:

ALL QUESTIONS that are a result of the Site Visit WILL BE SUBMITTED IN ENGLISH AND IN WRITING. All contractor questions and subsequent government answers will be published as Amendment 0002 to the Solicitation and posted on FedBizOpps.

5. Contractor question:

ATTACHMENT 0003 PRICE SHEETS

5. Government Answer:

REVISED

6. Contractor question:

Section 00 70 00, Page 12, Para 12. Will SPOT be required for Seed Task – Zone 6 Buildout?

6. Government Answer:

SECTION 00 70 00, GENERAL SCOPE OF WORK, Page 55, Paragraph 12. SYNCHRONIZED PRE- DEPLOYMENT AND OPERATIONAL TRACKER (SPOT) Delete paragraph, no requirement for SPOT.

7. Contractor question:

Section 01 00 00, Page 102, Attachment 2 Submittal Register. Please advise if this is just an example of Submittal Register that needs to be submitted after Award and does not have to be submitted as part of proposal or does the contents relate to this specific Task Order.

7. Government Answer:

Delete current ATTACHMENT 0004 AND replace with ATTACHEMENT 0004 included with this

AMENDMENT 0001.

8. Contractor question:

Where is the existing Light/Power/HVAC DB located in building? Is it possible to get As-built of existing electrical installation?

8. Government Answer:

See ATTACHMENT 0002, Pages 86 – 97 included Drawings from the solicitation, no As-Builts are available.

9. Contractor question:

Section 10 00 00, Page 82, Para 5.3.5. Does painting of interior walls include the interior of the precast exterior walls of the building?

9. Government Answer:

Yes, however it will be limited to only the pre-cast interior walls which will still be exposed after the installation on the build out gypsum board walls.

10. Contractor question:

Lighting diagram on page 88 of Solicitation shows an exterior Outdoor LED wall light. Section 01 00 00 Para 5.6 read “Exterior Improvements. 5.6.1. Not Applicable. Is a new LED Wall light to be supplied and installed as per sketch on page 88?

10. Government Answer:

The exterior light is not required to be supplied and installed as a part of this contract.

11. Contractor question:

Section 01 00 00 Para 5.3.5 please clarify paint specification for floor. Does it need to be an epoxy based paint?

11. Government Answer:

The paint for the floor needs to be an epoxy based paint.

12. Contractor question:

The SEED Project/first task per attachment 003 (BOM-Pricing sheet schedule). Would the US Government will consider to exclude this CLIN (Profit) in the schedule?

12. Government Answer:

There is no CLIN for profit. ATTACHMENT 0003 Pricing Sheet combines OVERHEAD & PROFIT, this will be used as part of the price reasonableness in the evaluation process. Overhead expenses include accounting fees, advertising, insurance (exclusive of DBA, which has a separate CLIN), interest on loans, legal fees, labor burden (employee benefits), office & equipment rent, repairs, supplies, taxes, telephone bills, travel expenditures, company cars and utilities. Overhead expenses are all costs on the income statement except for direct labor, direct materials, and direct expenses. All business have a cost of doing business and are entitled to reasonable profit.

13. Contractor question:

If we can get Clearer Drawings for SEED project.

13. Government Answer:

ATTACHMENT 0002 – DRAWINGS has been posted separately on FedBizOpps, or you may get a hard copy during the Site Visit.

14. Contractor question:

For Skirting, It is mentioned in the SOW to be Thermoplastic while in the BOQ it mentions Stock Pine (Wood) of 14mm x18mm.

14. Government Answer:

Thermoplastic as specified in the Statement of Work is required.

PER BUILDING

THIS LIST IS FOR ESTIMATING PURPOSES - CONTRACTORS MAY USE ADDITIONAL DESCRIPTIONS AS

NESSARY

CONSTRUCTION

SPECIFICATION

INSTITUTE (CSI) MATERIAL QTY

UNIT OF

MEASURE PRICE

TOTAL

PRICE

09 29 00 00‐10010 ‐

Drywall, 16 mm: Gypsum plasterboard, no finish (fire resistant)

09 29 00 00‐0046

Corner bead: Accessories, drywall, 25 mm x 25 mm, corner bead, galvanized steel

09 91 23 00‐0077 Paint: Interior painting, plaster of drywall, 1 coat filler, 2 coat finish

09 91 23 00‐0078

Paint: Interior painting, wood surfaces, door & frame, natural finish

05 41 00 00‐0006

Structural Metal Stud Framing: 2400 mm high walls, 18 gage x 91 mm wide, studs 400 mm O.C.

06 22 13 00‐0002 Baseboard: Moldings, base, stock pine, 14 mm x 88 mm

26 05 33 13‐0028

Electric metallic tubing (EMT):

Conduit, to 4.6 m high, 20 mm diameter, includes 2 terminations, 2 elbows & 11 beam clip, 30.5 m

26 05 33 13‐0254

Flexible metallic conduit and fittings:

Flexible metallic conduit, steel, 16 mm diameter

26 05 33 13‐0256 Flexible metallic conduit, 16 mm diameter, steel, connectors, plain

26 05 33 23‐0024

Switch box, two gang: Wiremold raceway, fittings, switch box, two gang, #500

26 05 33 16‐0015 Outlet boxes, square, 102 mm, with cover, concealed, 54 mm deep

26 24 16 00‐0149

Circuit Breakers with Earth Leakage Protection 30 ma outlet 240/415 V 22K A1C 20-60 A 1 Pole

07 21 16 00‐0012

Wall/ceiling insulation, 88 mm thick,

1.9 m2.K/W, 375 mm wide, fiberglass, unfaced, batt/blankets

26 05 19 16‐0807

Copper with ground wire (Romex):

Non‐metallic sheathed cable, 2 conductor, 600 V, cu with ground, 4

26 24 16 00‐0066

Panelboard, assembled, 20‐20 A breaker, main lugs, 100 A, 3 phase, 3 wire, 480 V

26 05 19 16‐0023 Conductor Three Core Sheathed 4 mm2

23 31 13 13‐0008‐

Duct, fabricated rectangular, over 2268 kg, includes fittings, aluminum, alloy 3003-h14

08 14 16 00‐0008

Wood frames, 700 x 2100 mm 17 mm x 114 mm deep, interior, pine, custom

08 14 76 01‐0024

Wood door residential, 45 mm x 2100 mm x 700 mm wide, exterior, solid core, flush, hardboard

01 74 13 00‐0003 Cleanup, floor area, final

Miscellaneous Electrical Parts

TOTAL MATERIALS

LABOR

OVERHEAD & PROFIT

CLIN 0001 JOB PRICE (Less DBA)

CLIN 0002 DBA (Calculated on Labor only)

GRAND TOTAL

TI

TL

E:

JO

B

N A

M E:

PC

B

Ba rra ck s

Bu ild o ut

LO

C A

TI

O

N

Zo ne

C

O N

TR

A

C T

N O

C

O N

TR

A

C

TO

R

SD

D es cr ip tio n

Ite m

S ub m itt ed Su bm it

Ap pr ov al

N ee de d By

M at er ia l N ee de d By

Ac tio n C od e

D at e

.0

3.

Pr ec on st ru ct io n

Su bm itt al s Pr oj ec t S ch ed ul e X

1.

Pr ec on st ru ct io n Su bm itt al s

Su bm itt al re gi st er

1.

Pr ec on st ru ct io n Su bm itt al s

Sa fe ty P la n

/A cc id en t P re ve nt at io n Pl an (A

PP

1.

Pr ec on st ru ct io n Su bm itt al s

Ac tiv ity H az ar d An al ys is (A

H A)

.0

3.

Pr ec on st ru ct io n

Su bm itt al s Q ua lit y C on tro l P la n

1.

Pr ec on st ru ct io n Su bm itt al s

C on st ru ct io n si te p la n

3.

4.

Pr ec on st ru ct io n

Su bm itt al s Tr af fic c on tro l p la n

1.

2.

Sh op

D ra w in gs C on st ru ct io n

Pr oj ec t S ig n

Sh op D ra w in gs

El ec tri ca l D ra w in gs op D ra w in gs

Pa ne l W iri ng D ia gr am s op D ra w in gs

Br ea ke r D ia gr am s op D ra w in gs

D uc t D ra w in gs

1.

3.

Pr od uc t D at a

As -B ui lt

R ec or d of E qu ip m en t a nd

M at er ia ls

1.

6.

Pr od uc t D at a

W ar ra nt y M an ag em en t P la n

1.

6.

Pr od uc t D at a

W ar ra nt y Ta gs

1.

Pr od uc t D at a O pe ra tio n an d

M ai nt en an ce

M an ua ls

1.

Pr od uc t D at a Fo rm D

D

Pr od uc t D at a El ec tri ca l P an el

U L/

C E

C er tif ic at es od uc t D at a El ec tri ca l P an el

U L/

C E

C er tif ic at es od uc t D at a Br ea ke r U L/

C E

C er tif ic at es

/P ro du ct

D at a od uc t D at a Li gh t F ix tu re s od uc t D at a

O ut le ts od uc t D at a

El ec tri ca l C on st ru ct io n M at er ia l od uc t D at a

D uc t M at er ia l od uc t D at a

Vo lu m e

C on tro l D am pe rs S up pl y

R et ur n od uc t D at a

In te rio r D oo rs od uc t D at a

Pa in t M at er ia l & C ol or

X

Pr oj ec t N um be r:

A

J1 7-

SU

B

M

IT

TA

L

R

EG

IS

TE

R

A

PP

R O

VI

G

A U

TH

O

R

IT

Y

Submittal Identification

Transmittal Number

Specification Section Number

Government Approval

For Information Only

R em ar ks

C O

N

TR

A C

TO

R

S C

H

ED

LE

D

TE

S

Section Paragraph Number

Ty pe o f S ub m itt

W912D1-17-R-0010 Page 9 of 10

TI

TL

E:

JO

B

N A

M E:

PC

B

Ba rra ck s

Bu ild o ut

LO

A

TI

O

N

Zo ne

C

O N

TR

A

C T

N O

C

O N

TR

A

C

TO

R

D es cr ip tio n

Ite m

S ub m itt ed Su bm it

Ap pr ov ee de d By

M at er ia l N ee de d By

Ac tio n C od e

D at e

Pr oj ec t N um be r:

A

J1 7-

SU

B

M

IT

TA

L

R

EG

IS

TE

R

A

PP

R O

VI

G

TH

O

R

IT

Y

Submittal Identification

Transmittal Number

Specification Section Number

Government Approval

For Information Only

R em ar ks

C O

N

TR

A C

TO

R

S C

H

ED

LE

D

TE

S

Section Paragraph Number

Ty pe o f S ub m itt od uc t D at a

C on cr et e An ch or s od uc t D at a

In su la tio n od uc t D at a

Fi re

E xt in gu is he r & M ou nt od uc t D at a

Fi rs t A id

K it er tif ic at es

Te st

C er tif ic at es

X