Salient Characteristics_Roads and Ground Equipment.pdf

Salient Characteristics: Equipment (Roads and Ground)

1. MOWER

JOHN DEERE 1600 Turbo TerrainCut Commercial Wide-Area Mower with 4- Post ROPS Canopy Contract: GSA GS-30F-0007T (PG 3Y CG 21) Mfr Part No: 0736TC

KEY SPECS:

Engine Manufacturer/model 4TNV86CT-DJWM (T4)

Engine Power Gross power SAE J1995 at 3,000 rpm, PS 60 hp44 kW

Fuel tank capacity 22 U.S. gal./hr83.3 L

Mower deck Size 62, 94, 128 in.157, 239, 325 cm

Blade tip speed 13,000 fpm3,962 m/min

Transmission Hydrostatic

Speed range 0-15 mph0-24 km/h

Drive tires 26x12-12

Caster wheels Four, 11x4-5, flat-free Two, 11x4-5, flat-free

Warranty 24 months

ENGINE:

Manufacturer/model

Model 4TNV86CT-DJWM (T4)

Displacement 127.6 cu in.2.091 L2,091 cc

Bore and stroke 3.4x3.5 in.86x90 mm

Injection Direct

Starting aid Engine glow plug

Cylinders Four

Cycle Four

Power Gross power SAE J1995 at 3,000 rpm, PS 60 hp44 kW

Rated engine speed 3,000 rpm

Operating range With isochronous governor 1,400-3,030 rpm

Lubrication Pressurized by lobe-style pump

Oil filter Spin-on

Cooling Liquid-cooled water centrifugal

Cooling system capacity 2.5 U.S. gal.7.5 L

Crankcase capacity 6.1 U.S. qt5.8 L

Compression ratio 19:01

Operating torque 103 lb-ft140 Nm (net continuous @ 3000 rpm) Max Torque per SAE J1349 117.3 lb-ft159 Nm (net continuous) Air cleaner Dual element, dry type

Air restriction indicator Standard, progressive type

Engine shutoff Key

Radiator location Rear mounted

Radiator fins per inch 10 fins per inch

Horsepower (net intermittent)

FUEL SYSTEM:

Fuel type Diesel

Fuel transfer pump Electric

Fuel filter Replaceable, spin-on type

Water separator Replaceable, 100-mesh element

Cold start device Increased timing for better cold starting

Fuel tank capacity 22 U.S. gal.83.3 L

Fuel pump type Mechanical

Fuel neck opening 3 in.7.6 cm

Fuel tank location Left side of the machine

Self bleeding System is self-bleeding because of the electric fuel transfer pump

FUEL CONSUMPTION:

Full load 3.33 U.S. gal./hr12.7 L/hr

One-half load 1.93 U.S. gal./hr7.31 L/hr

IMPLEMENT LIFT:

Type Hydraulic, open center

Lift cylinders Bore 2 in.50.8 mm

Pump Gear

ELECTRICAL:

Charging system Automotive type

Alternator 75 amp

Battery voltage 12 V

Battery cold crank amps 675 CCA

Starter size 1.9 hp1.4 kW

HYDRAULIC SYSTEM:

Traction drive pump Displacement, axial piston pump, 3 cu in.49 cc

Motor Displacement, axial piston pump, 2 cu in.33 cc

Type Closed loop, hydrostatic

Steering relief 1,087 psi

Implement relief 1,600 psi

Hydraulic reservoir capacity 14 U.S. gal.53 L

DRIVETRAIN:

Transmission Hydrostatic

Transaxle type Dual range

Transaxle Tuff Torque (Kanzaki)

4 wheel drive On demand or full time

4 wheel drive type Mechanical rear-wheel drive

Differential lock Mechanical, foot activated

Final drive Planetary

BRAKES:

Type Internal, wet disc

Steering brakes Standard

Parking brakes Hand brake

TRAVEL SPEED:

Speed range 0-15 mph0-24 km/h

Low forward speed 0-9 mph0-14.5 km/h

High forward speed 0-15 mph0-24 km/h

Low reverse speed 0-4.5 mph0-7.2 km/h

High reverse speed 0-7.5 mph0-12 km/h

SOUND LEVEL (WITHOUT CAB):

With deck 94 dBA

Without deck 89 dBA

FRAME:

Frame type Welded, tubular steel

Thickness 11 gauge0.120 in.3 mm

STEERING:

Type Power, hydrostatic

Tilt steering wheel Standard

Turns lock-to-lock 2.5

Turning radius 39 in.99 cm

OPERATOR STATION:

Seat Adjustment positionsMultiArmrestsYes, adjustableAir-ride suspension seat, adjustable, deluxe, high-backed, back angle adjustment, lumbar adjustment, standard armrests Safety Safety interlock and operator presence system

TIRES:

Drive tires Pressure30 psi , 206.8 kPa (front)28 psi, 193.1 kPa (rear)26x12-12

Steering tires (rear) 18x9.5-8

Tread Multi-trac

Ply rating 6 PR (both)

DIMENSIONS:

Length (with deck) 132 in.335 cm

Wheel base 60 in.152 cm

Tread width 52 in.131 cm

Width with decks down 134 in.340 cm

Height with ROPS ROPS up, 98 in.249 cmROPS down, 74 in.188 cmWith four-post canopy ROPS, 82 in.208 cm Transport width 84 in.213 cm

Ground clearance 6.5 in.16.5 cm

Uncut circle of grass w/o brakes

Vehicle weight 4,173 lb1,892.8 kg

Machine weight without the deck 3,264 lb1,474.2 kg

ROPS:

Type Standard two-post folding ROPS or four-post canopy ROPS meets ISO21299 standard

CONTROLS:

Throttle Hand

Forward/reverse Two-pedal

Mower lift Three two-function switches

Park brake Foot pedal/disk

Indicator lights Engine air heater, oil pressure light, engine temperature light, fuel gauge, hydraulic oil temperature light

PTO engagement TypeHydraulic, independentElectric solenoid switch

PTO engagement/disengagement Electric solenoid

Deck drive pump Displacement, axial piston pump, 2.48 cu in.40.6 cc

Deck motor TypeHydraulic, open center, closed loopDisplacement, gear motor, 2.5 cu in.41 cc

Circuit Series

MOWER DECKS:

Deck drive type Hydraulic, closed loop

Spindles Heat treated, diameter, 1 in.2.54 cm

Spindle bearings greaseable Yes

Energy-absorbing wing decks Yes

Deck circuit Series

Blade drive C-section, V-belt

Size 62, 94, 128 in.157, 239, 325 cm

Center deck cutting width 62 in.157 cm

Wing deck cutting width 42 in.107 cm

Transport lock Standard

Discharge Rear

Deck construction Fabricated steel

Deck thickness 7 gauge0.180 in.4.6 mm

Height-of-cut rang 1-5.5 in.2.5-13.9 cm

Wing deck float Up (while maintaining PTO engagement)45 degrees Down (while maintaining PTO engagement)20 degrees

MOWING RATE:

80% field efficiency 85% field efficiency at 10 mph16 km/h11 acres/hr

ANTI-SCALP ROLLERS:

Type Flat-free

Wing deck caster wheels Four, 11x4-5, flat-free

Front deck caster wheels Two, 11x4-5, flat-free

BLADES:

Total mower blades Seven, three center and two each side

Blade length 22 in.55.88 cm

Blade width 2.5 in.6.35 cm

Blade thickness 0.312 in.0.79 cm

Blade tip speed 13,000 fpm3,962 m/min

Interchangeable mower Yes blades between all decks

BUYER'S NOTES:

Warranty 24 months

Certification ANSI B71.4

2. Flex Wing Cutter

JOHN DEERE FC20R Flex Wing Rotary Cutter Contract: Federal Open Market - Ag Turf & Comm 30F_0007T (PG 1B CG 21) Qty Mfr Part No: 22G1P FC20R Flex Wing Rotary Cutter 1 0202 United States 1 1220 Airbag Suspension 1 2501 Blade Pan - 125 HP 1 3315 8 Laminated Tires – (Double tires on center and wings) - Puncture proof 1 3541 1000 RPM Driveline - 1 3/8" coupler - Cat 6 1 3641 1000 RPM-125 HP Gearbox - Commercial duty 1 5110 Clevis Hitch 1 5280 Rigid Casting Tongue 1 9400 Front Safety Shield – Second row chain 1 9410 Rear Safety Shield – Second row chain 1

Standard Options

6.1 m20 ft

101.6 mm4 in.

56 kW75 hp At wing wheels: 3.4 m 11.1 ft 7 gauge - 4.55 mm0.18 in.

3 gauge - 6 mm0.24 in.

3466 kg7643 lb CV ASAE Category 6, splined telescoping profiles 540 rpm: 81.7 m/s268.1 fps1000 rpm: 83 m/s272.4 fps 5-year warranty

6.1 m20 ft 25.4-406.4 mm1-16 in.May vary with suspended tongue

101.6 mm4 in.

254 mm10 in.

56 kW75 hp 540 or 1,000 rpm Standard self-level hitch clevis with 57.2-cm (22.5-in.) narrow-profile widthBall-type self-level hitch with 57.2-cm (22.5- Mechanical jack stand in base for all machines with hydraulically operated height, stays vertical while raising/lowering At wing wheels: 3.4 m 11.1 ft

6.2 m20.3 ft

3. Snow Pusher

Qty Model/Serial # Description 1 SN: SF120-23216 KAGE Snowstorm Pusher 12’ (Attachment)

4. Ventrac Sidewalk Cleaner

Qty Model# Description 1 4520Y (39.51217) Ventrac Tractor: KN, 4520Y Kubota D902 Included Standard: Weight Transfer, SDLA Hand Controls, 4 Rear Weights, Front Fenders, Foot Pegs 1 KW452 (70.2014) Accessory: CAB Cab, KW452 for 4500/4520 1 70.2006-4 Accessory: Kit, Mirror 1 70.8162 Accessory: Kit, Cab Hazard Lights 1 70.8161 Accessory: Kit, Cab Strobe Light 1 70.8148 Accessory: Kit, Cab Windshield Washer 1 70.2006-6 Accessory: Kit, Defrost Fan 1 70.2014-51 Accessory: CAB HEATER KIT 4500/4520 Y&Z Kit, KW452 Heatr Install 4500/4520 N,Y&Z 1 KJ520 (39.55401) Attachment: BROOM KJ, KJ520 Broom 1 70.8211 Accessory: Kit, 12V Actuator KJ 1 70.4161 Accessory: 12V SWITCH & PLUG Kit, 12V Front 4520/4500 1 KV552 (39.55271) Attachment: V-BLADE KV, KV552 V-blade