FireAlarmQuestion__Answers_(002).docx

W912CJ-16-R-0009

Question & Answer

1. Do you have a current device list of what is currently on the system?

A: No.

2. Are we bringing the entire system up to current NFPA/IBC standards, or just doing a device for device replacement? The scope mentions installing smoke detectors “throughout” the facility.

A: Install to code.

3. Are we to install Full Smoke Detector coverage, or just the minimum required by NFPA/IBC?

A: Install what is required by code.

4. Is there a Fire Sprinkler system present at the facility?

A: There is no sprinkler system in the building.

5. Scope of work states complies with state and local codes. Do the military or Govt Standards apply?

A: Yes.

6. Is plenum rated cable above 7'-00" AFF acceptable?

A: Yes.

7. Is 100% Conduit raceway required? 100% Conduit is not required per local Codes.

A: Go with the code.

8. The scope indicates to secure local permits and fees? Will Seagoville FD require plans submittals and Permit fees?

A: That is a question for the Seagoville FD.

9. Will the project require and offsite dialer?

A: If not in the scope it is not required.

10. The scope of works indicated 14 days for completion, the badging of employees, fire alarm submittal and COR. Review and approvals will take longer than the 14 days to complete.

A. It is 14 days from NTP. NTP will be given once all requirement have been met.

11. Will CADD Floor plans be provide for drawing submittal preparation?

A: No.

12. Will the Owner provide the required 120vac dedicated power?

A: Yes.