Solicitation - W912CH27BA030.pdf

PDF 5 MB Posted

Attached to
Solicitation: Holder, Ammunition (NSN: 1398-01-330-9529)
Solicitation number
W912CH-27-B-A030
Issued by

About this file

This is an Invitation for Bids (IFB) for a firm-fixed-price contract with a 100% option to procure Holder, Ammunition components (NSN 1398-01-330-9529, Part Number 12916856) from the Army Contracting Command - Detroit Arsenal. This is a total small business set-aside in accordance with RFO 19.104-1. The solicitation includes three contract line items: production quantity of 3 units (CLIN 0001), unexercised option quantity of 3 units (CLIN 0002), and a First Article Test Report (CLIN 0003). Bids must be submitted electronically via email to the designated contract specialists by the closing date specified on the cover page, with bid opening scheduled virtually on December 23, 2026 at 1:00 p.m. local time (Warren, MI). All bids must remain valid for a minimum of 90 calendar days. The procurement utilizes NAICS code 332993 (Ammunition Manufacturing), and bidders must register in SAM prior to submitting a bid. A Technical Data Package (TDP) with distribution code "D" (limited to Department of War and U.S. DoW contractors) is available on SAM.gov and requires bidders to have current DD Form 2345 certification to access. Bidders must access the TDP prior to bid submission or face rejection. Inspection and acceptance occur at origin, with First Article Test Report acceptance at destination. The contract includes requirements for military preservation and packing per MIL-STD-2073-1, compliance with Special Packaging Instruction 12916856, CARC paint systems with light phosphate coating, OPSEC training and coordination, CUI handling procedures, and various certifications including arms control treaty compliance and specialty metals compliance. Bidders may request First Article Approval waiver using the provided worksheet if they can demonstrate prior successful production of the same or similar items, though the Government will only review the apparent low bidder's waiver request post-opening. All offers must be for the total quantities specified; partial offers will be deemed nonresponsive. Only one award will be made.

View the file

Other files

File Type Posted
FIRST ARTICLE WAIVER WORKSHEET.pdf PDF
CONTRACT DATA REQUIREMENTS LIST.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SECTION

15A. NAME AND

ADDRESS

OF OFFEROR

SOLICITATION, OFFER, AND AWARD 1. This Contract is a Rated Order under the Defense Priorities and Allocations System (DPAS) - Code of Federal Regulations - at 15 CFR 700.

RATING PAGE OF PAGES

2. CONTRACT NUMBER 3. SOLICITATION NUMBER 4. TYPE OF SOLICITATION 5. DATE ISSUED 6. REQUISITION/PURCHASE NUMBER

CODE7. ISSUED BY 8. ADDRESS OFFER TO (If other than item 7)

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

9. Sealed offers in original and copies for furnishings the supplies or services in the Schedule will be received at the place specified in item 8, or if hand carried, in the depository located in until local time

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision Number 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. FOR

INFORMATION

CALL:

A. NAME B. TELEPHONE (NO COLLECT CALLS)

AREA CODE NUMBER EXTENSION

C. EMAIL ADDRESS

11. TABLE OF CONTENTS

(X) DESCRIPTION PAGE(S) (X) SECTION PAGE(S)DESCRIPTION

A B C D E F G H

I

J

K

L

M EVALUATION FACTORS FOR AWARD

INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

REPRESENTATIONS, CERTIFICATIONS AND OTHER

STATEMENTS OF OFFERORS

PART IV - REPRESENTATIONS AND INSTRUCTIONS

LIST OF ATTACHMENTS

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

CONTRACT CLAUSESSOLICITATION/CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/COSTS

DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

PACKAGING AND MARKING

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

CONTRACT ADMINISTRATION DATA

SPECIAL CONTRACT REQUIREMENTS

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

OFFER (Must be fully completed by offeror)

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause Number 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

10 CALENDAR DAYS (%) 20 CALENDAR DAYS (%) 30 CALENDAR DAYS (%) CALENDAR DAYS (%)

DATEAMENDMENT NUMBERAMENDMENT NUMBER DATE

CODE FACILITY 16. NAME AND THE TITLE OF PERSON AUTHORIZED TO SIGN OFFER

(Type or print)

15B. TELEPHONE NUMBER

AREA CODE NUMBER EXTENSION

15C. CHECK IF REMITTANCE ADDRESS IS

DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

17. SIGNATURE 18. OFFER DATE

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL OPEN COMPETITION UNDER THE

UNITED STATES CODE AT:

10 U.S.C. 3204(a) ( )41 U.S.C. 3304(a)

24. ADMINISTERED BY (If other than Item 7)

26. NAME OF CONTRACTING OFFICER (Type or print)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition is unusable

23. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

25. PAYMENT WILL BE MADE BY

27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

CODE

ITEM

STANDARD FORM 33 (REV. 12/2022)

Prescribed by GSA - FAR (48 CFR) 53.214 (c)

SEALED BID (IFB) INVITATION FOR BID

NEGOTIATED (RFP) REQUEST FOR

PROPOSAL

(Hour) (Date)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

Section A - Solicitation/Contract Form

Holder, AmmunitionInstrument Name:

Product Service Code : 1398

A.1. DESCRIPTION OF ACTION

(a) This Invitation for Bids (IFB) is intended to result in the award of a firm-fixed-price (FFP) contract with 100% option for the Holder, Ammunition, National Stock Number (NSN): 1398-01- 330-9529, Part Number: 12916856.

(b) This IFB is a total small business set-aside in accordance with Revolutionary FAR Overhaul

(RFO) 19.104-1.

(c) There is a Technical Data Package (TDP) associated with this procurement. The TDP is distribution code "D", which limits access to Department of War (DoW) and U.S. DoW contractors only. Please see Section C.1 Technical Data Package Information for instructions on how to access this data. BIDDERS MUST ACCESS THE TDP PRIOR TO SUBMITTING A BID OR THE

BID SUBMISSION WILL BE REJECTED.

(d) Bidders are advised to carefully read and understand this entire IFB, including Sections L and M, prior to submitting a bid for evaluation. The Government will evaluate bids without discussions /negotiations and does not assume the duty to search for data to cure problems it finds in any bid.

Therefore, all information necessary for the review and evaluation of a bid is to be contained within the bid submission.

(e) Bidders must complete all necessary fill-ins and representations throughout this IFB, including but not limited to:

(1) STANDARD FORM 33 (IFB COVER PAGE): Blocks 14 through 18;

(2) SECTION B: The unit prices and dollar amounts requested for CLIN 0001: Production Quantity, CLIN 0002: Unexercised Option Quantity, and CLIN 0003: First Article Test Report;

(3) SECTION E: E.1. Inspection and Acceptance Points - Origin;

(4) SECTION F: F.2 Time of Delivery;

(5) SECTION I: 52.219-28 - Postaward Small Business Program Rerepresentation (Deviation 2026-O0038);

(6) SECTION K: RFO 52.209-13 - Violation of Arms Control Treaties or Agreements - Certification;

(7) SECTION K: RFO 52.225-18 - Place of Manufacture;

W912CH27BA030

(8) SECTION K: RFO 52.229-11 - Tax on Certain Foreign Procurements - Notice and Representation;

(9) SECTION K: RFO 52.203-2 - Certificate of Independent Price Determination;

(10) SECTION K: RFO 52.214-14 - Place of Performance - Sealed Bidding;

(11) SECTION K: 252.204-7017 - Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation; and

(12) SECTION K: 252.225-7010 Commercial Derivative Military Article-Specialty Metals Compliance Certificate.

Failure to complete all required fill-ins and representations may result in the rejection of a bid.

(f) Bidders shall acknowledge receipt of all IFB amendments by the date and time indicated for receipt of bids. If this IFB is amended, all terms and conditions not modified remain unchanged.

Please see Section A.7 Acknowledgement of Amendments and RFO 52.214-3: Amendments to IFBs for additional information.

(g) Bid opening will be held with all Bidders and shall commence on 23 December 2026 at 1:00 p.

m. local time (Warren, MI). Due to security protocols at the Detroit Arsenal, bid opening will be held virtually. Bidder attendance at this event is not required. The Government will provide a Microsoft Teams link, teleconference number, and passcode prior to bid opening. Please contact the following personnel via email, after IFB close and at least 24 hours prior to bid opening, to receive this information:

HALEY R. BRUNS

CONTRACT SPECIALIST, ARMY CONTRACTING COMMAND - DETROIT ARSENAL

EMAIL: haley.r.bruns.civ@army.mil

-and-

COLIN T. CREAGH

CONTRACT SPECIALIST, ARMY CONTRACTING COMMAND - DETROIT ARSENAL

EMAIL: colin.t.creagh.civ@army.mil

A.2. IFB STRUCTURE

(a) NAICS. The Government will utilize North American Industry Classification System (NAICS) code 332993 - Ammunition (except Small Arms) Manufacturing for this procurement. Failure to register via the System for Award Management (SAM) website for this NAICS, prior to submitting a bid in response to this IFB, may preclude your firm from receiving an award. Bidders should be aware of how U.S. small business concerns are defined in RFO Part 19, RFO DFARS Part 219, and 13 CFR 121 Small Business Size Regulations. Bidders are advised to review 13 CFR 121.103, "How does SBA determine affiliation?", if applicable to this IFB.

(b) All bids received in response to this IFB shall be valid for a minimum of 90 calendar days.

Please see RFO 52.214-16: Minimum Bid Acceptance Period for additional information.

A.3. ELECTRONIC CONTRACTING

(a) All Army Contracting Command - Detroit Arsenal IFBs will be publicized on the SAM website:

https://www.SAM.gov

Any additional attachments, including the TDP(s) when available electronically, will be separate attachments or links embedded in the IFB.

(b) Interested Bidders shall submit a completed IFB, including the Standard Form 33, via email with the subject line "IFB Submission - W912CH-27-B-A030 (Contractor Name)" to the following personnel:

HALEY R. BRUNS

CONTRACT SPECIALIST, ARMY CONTRACTING COMMAND - DETROIT ARSENAL

EMAIL: haley.r.bruns.civ@army.mil

-and-

COLIN T. CREAGH

CONTRACT SPECIALIST, ARMY CONTRACTING COMMAND - DETROIT ARSENAL

EMAIL: colin.t.creagh.civ@army.mil

Once a bid is received, the Contract Specialist will reply to the respective Bidder indicating receipt of the submission. NOTE: FAX, HARDCOPY (PAPER), AND DVD/CD-ROM BIDS WILL NOT BE

ACCEPTED. HAND-CARRIED BIDS, WHETHER HARDCOPY OR ELECTRONIC, WILL ALSO

NOT BE ACCEPTED.

(c) Please pay close attention to the Issued By block on the cover page of this IFB for a closing date and time. The closing date and time is based on the local time of the listed location of the Issued By office. In accordance with RFO 52.214-7: Late Submissions, Modifications, and Withdrawals of Bids, Bidders are responsible for submitting bids, and any revisions/modifications, so as to be received by the Government office designated in the IFB by the date and time specified.

(d) It is the Bidder's responsibility to ensure the bid is received by the date and time specified on the cover page of this IFB. In accordance with RFO 52.214-7: Late Submissions, Modifications, and Withdrawals of Bids, if the bid was not received at the initial point of entry to the Government infrastructure (in this case, received via email) by the exact date and time specified on the cover page of this IFB, it will be determined late. Bid is defined to mean ALL volumes or parts required by the IFB are included in the electronic submission.

NOTE: There is no "expected" or "target" length of time for bid submission; size and content may be factors, therefore Bidders are strongly cautioned when submitting bids to allow adequate time for submission.

(e) IFBs may remain posted on SAM.gov after the IFB closing date. If the response deadline has passed for the IFB, vendors will no longer be able to submit electronic responses.

(f) Any award issued as a result of this IFB will be distributed electronically. In the event of a Freedom of Information Act (FOIA) request for a copy of any award issued as a result of this IFB, or any subsequent modifications to the contract, the contract and modifications will be released, including the awarded unit price(s). This is the notice required by Executive Order 12600 (June 23, 1987) of the Government's intention to release unit prices in response to any request under FOIA, 5 USC 552. Unit price is defined as the contract price per unit or item purchased as it appears in Section B of the contract and is NOT referring to nor does it include cost or pricing data /information. If a Bidder objects to such release in the base contract or contract modifications, the Bidder must notify the Contracting Officer in writing prior to the closing date identified in this IFB and include the rationale for the objection consistent with the provisions of FOIA. A release determination will be made based on the rationale given.

(g) All questions pertaining to this IFB shall be submitted via email to the following personnel by 07 December 2026 at 3:00 PM EST local time (Warren, MI):

HALEY R. BRUNS

CONTRACT SPECIALIST, ARMY CONTRACTING COMMAND - DETROIT ARSENAL

EMAIL: haley.r.bruns.civ@army.mil

-and-

COLIN T. CREAGH

CONTRACT SPECIALIST, ARMY CONTRACTING COMMAND - DETROIT ARSENAL

EMAIL: colin.t.creagh.civ@army.mil

Responses will be furnished via a Q&A log posting to SAM.gov or as an IFB amendment, if the information is necessary in submitting bids or if the lack thereof would be prejudicial to other prospective Bidders. Please see RFO 52.214-6: Explanation to Prospective Bidders for additional information. The Government will review all questions received but is not obligated to answer questions submitted after the date/time noted above, prior to IFB close.

(h) For technical assistance in doing business with the Government, and doing business electronically, please visit the Procurement Technical Assistance Center (PTAC) website to locate a regional center at:

http://www.aptac-us.org

A.4 ALL OR NONE

Offers in response to this solicitation must be submitted for the total quantity of the items identified in the solicitation.

(1) ONLY ONE AWARD WILL BE MADE AS A RESULT OF THIS SOLICITATION.

(2) OFFERS SUBMITTED FOR LESS THAN THE TOTAL QUANTITIES OF ALL THE ITEMS IN

THIS SOLICITATION WILL BE DEEMED NONRESPONSIVE.

A.5 ARMY CONTRACTING COMMAND - DETROIT ARSENAL (DTA)

OMBUDSPERSON

Information regarding the Ombudsperson for this contract is located at the following website:

(Best viewed using Google Chrome or Microsoft Edge).https://tacom.army.mil/ombudsman

A.6 DISTRIBUTION AND DESTRUCTION OF EXPORT CONTROL TECHNICAL DATA

PACKAGE

(a) This solicitation and resulting contract contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provision of DoD Directive 5230.25 and DoD Instruction 2040.02. This also applies to distribution of the TDP to all SUBCONTRACTORS at every level.

(b) To be eligible to gain access to this export controlled TDP (via SAM.gov) an offeror must have a current DD 2345, "Militarily Critical Technical Data Agreement" certification on file with the Defense Logistics Information Service (DLIS). To obtain certification, contractors must submit a DD Form 2345 to the United States (U.S.)/Canada Joint Certification Office (JCO), along with a copy of supporting documentation. DD Form 2345 and instructions can be found on the Joint Certification Program website at: http://www.dla.mil/HQ/InformationOperations/Offers/Products /LogisticsApplications/JCP.aspx Processing time is estimated at six (6) to ten (10) weeks after receipt. Upon receipt of certification, an offeror may request the TDP in accordance with the solicitation's Section C "Technical Data Package" instructions.

(c) Upon completion of the purposes for which Government Technical Data has been provided, the offeror, and all subcontractors, vendors, and sub-vendors of the offeror, are required to destroy all documents, including all reproductions, duplications, or copies thereof as may have been further distributed.

(d) Destruction of this technical data shall be accomplished by: shredding, pulping, burning, or melting any physical copies of the TDP and/or deletion or removal of downloaded TDP files from computer drives and electronic devices, and any copies of those files.

W912CH27BA030

https://tacom.army.mil/ombudsman https://tacom.army.mil/ombudsman

A.7 ACKNOWLEDGEMENT OF AMENDMENTS

Acknowledge all the amendments received from the Government by identifying the amendment number and its issue date below:

Amendment Number: Date:

*** END OF NARRATIVE 1 ***

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quanti ty

Unit Unit Price Amount

0001 HOLDER, AMMUNITION -

PRODUCTION QUANTITY

Manufacturer's Part Number:

12916856

Manufacturer's CAGE: 19200

National Stock Number:

1398013309529

CLIN only - Requisition Document Number (MILSTRIP, DLMS, FEDSTRIP): W562RP6176001N

Product Service Code: 1398

North American Industry Classification System (NAICS):

332993

Bill to Party: W562RP

Pricing Arrangement: Firm Fixed Price

3 Each

Additional Descriptive Data:

FAT units from the approved First Article Test Report are authorized to be delivered as part of the production quantity.

TOP DRAWING NR: TDPL 12916856

DATE: 21-FEB-2024

PACKAGING/PACKING/SPECIFICATIONS: SEE PACKAGING REQUIREMENTS

CLAUSE D.1

LEVEL PRESERVATION: Military

LEVEL PACKING: B

INSPECTION: Origin ACCEPTANCE: Origin

FOB POINT: Destination

SHIP TO:

(W562RP) SR WOLX ARMY GENERAL SUPPLY

DLA DISTRIBUTION ANNISTON

7 FRANKFORD AVE 362

ANNISTON, AL, 36201-4199

Option Line Item

HOLDER, AMMUNITION -

UNEXERCISED OPTION

QUANTITY

Manufacturer's Part Number:

12916856

Manufacturer's CAGE: 19200

National Stock Number:

1398013309529

CLIN only - Requisition Document Number (MILSTRIP, DLMS, FEDSTRIP): W562RP6176001N

Product Service Code: 1398

North American Industry Classification System (NAICS):

332993

Bill to Party: W562RP

Pricing Arrangement: Firm Fixed Price

3 Each

Additional Descriptive Data:

TOP DRAWING NR: TDPL 12916856

DATE: 21-FEB-2024

PACKAGING/PACKING/SPECIFICATIONS: SEE PACKAGING REQUIREMENTS

CLAUSE D.1

LEVEL PRESERVATION: Military

LEVEL PACKING: B

INSPECTION: Origin ACCEPTANCE: Origin

FOB POINT: Destination

SHIP TO:

(W562RP) SR WOLX ARMY GENERAL SUPPLY

DLA DISTRIBUTION ANNISTON

7 FRANKFORD AVE 362

ANNISTON, AL, 36201-4199

OPTION QUANTITY, PURSUANT TO FAR CLAUSE 52.217-7: OPTION FOR

INCREASED QUANTITY -- SEPARATELY PRICED LINE ITEM. The quantity stated for option CLIN 0002 DOES NOT FORM A PART OF THE BASIC CONTRACTUAL QUANTITY. Part or all of it may, however, be added to the contract at the discretion of the Government, by exercise of the Option clause. Failure of the offeror to insert a unit price applicable to the option quantity shall mean the offeror will supply all or any part of the option, if exercised by the Government, AT THE BASIC CONTRACT UNIT PRICE, and the offer will be evaluated for award accordingly.

0003 FIRST ARTICLE TEST (FAT)

REPORT

Manufacturer's Part Number:

12916856

Manufacturer's CAGE: 19200

National Stock Number:

1398013309529

1 Lot

Product Service Code: R410

North American Industry Classification System (NAICS):

332993

Pricing Arrangement: Firm Fixed Price

Additional Descriptive Data:

FAT units from the approved First Article Test Report are authorized to be delivered as part of the production quantity.

DATE: 21-FEB-2024

TOP DRAWING NR: TDPL 12916856

INSPECTION: Origin ACCEPTANCE: Destination

First Article Test (FAT), pursuant to the requirements listed in:

SECTION E:

- E.4 SUPPLEMENTAL REQUIREMENTS TO FIRST ARTICLE APPROVAL

(CONTRACTOR TESTING)

- E.5 INSPECTION AND ACCEPTANCE (FIRST ARTICLE APPROVAL)

- E.6 PROVISION FOR WAIVER OF REQUIRED FIRST ARTICLE APPROVAL -

SEALED BIDDING

SECTION I:

- 52.209-3 First Article Approval-Contractor Testing

All bidders shall identify a dollar amount for CLIN 0003 , even when requesting a first article waiver in accordance with E.6 Provision for Waiver of Required First Article Approval - Sealed Bidding. Failure to separately identify a FATR dollar amount shall mean that the bidder will provide FATR at no additional cost to the Government, and the bid will be evaluated accordingly.

9000 CONTRACT DATA

REQUIREMENTS LIST (A001-

A005)

Product Service Code: H259

Pricing Arrangement: Firm Fixed Price

1 Lot

Additional Descriptive Data:

The below Exhibit Line Item Numbers (ELINs) are associated with the Data Item Numbers on the Contract Data Requirements List (CDRL, DD Form 1423), in Section J.

Section C - Description/Specifications/Statement of Work

C.1 TECHNICAL DATA PACKAGE INFORMATION

The following "X"d item applies to this solicitation:

[ ] 1. There is no Technical Data Package (TDP) included with this solicitation.

[ X ] 2. The TDP for this solicitation resides within the System for Award Management (SAM) (https://SAM.gov) associated with this solicitation number:

W912CH-27-B-A030

To access the data through SAM:

a. Log on to the SAM web site: https://SAM.gov.

b. Search for the solicitation number.

c. Click on the attachment you would like to view.

d. If the attachment is restricted, request access to the document.

(1) TDPs that have an Export Control Warning Notice are subject to the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code).

(2) Further dissemination of the TDP must be in accordance with provisions of DoD Directive 5230.25, DoDI 5230.24, its Distribution Statement markings, and U.S. export control laws. This also applies to distribution of the TDP to all SUBCONTRACTORS at every level.

(3) To obtain these TDPs, contractors must have a current DD 2345, Militarily Critical Technical Data Agreement on file with Defense Logistics Information Service (DLIS). To obtain certification, go to DD FORM 2345 Instructions and DD 2345.

(4) Upon completion of the purposes for which Government Technical Data has been provided, the Contractor is required to destroy all documents, including all reproductions, duplications, or copies thereof as may have been further distributed by the Contractor. Destruction of this technical data shall be accomplished by: shredding, pulping, burning, or melting any physical copies of the TDP and/or deletion or removal of downloaded TDP files from computer drives and electronic devices, and any copies of those files.

e. If technical data is otherwise restricted, select "Request Explicit Access." This will generate an email to the Contract Specialist and Contracting Officer at Army Contract Command - Warren (DTA) with all the information needed to grant contractor access to restricted documents. SAM will

W912CH27BA030

https://www.dla.mil/Portals/104/Documents/J3LogisticOperations/FIC/JCP/J3_DDForm2345Instructions(Oct2022)_221005.pdf?ver=dLEK75KpKWRfj3e5wMI8BQ%3d%3d https://www.esd.whs.mil/Portals/54/Documents/DD/forms/dd/dd2345.pdf automatically generate an email stating when the requesting contractor has permission to view or download TDP items.

f. If multiple individuals in the contractor's organization need access to the Technical Data Package (TDP) for a solicitation and an explicit access request is required, each individual MUST submit an explicit access request to be granted approval to view the TDP. Those same individuals MUST be registered in SAM. Any individuals no longer with the company should be deleted. Questions related to registration in SAM should be directed to https://www.sam.gov/ The SAM helpdesk phone number is (866) 606-8220. Vendors are responsible for placing correct information in SAM.

g. It is strongly suggested that contractors submit the explicit access request and provide the buyer with the completed "Use and Non-Disclosure Agreement" at the same time if the solicitation requires both to gain access to view the TDP.

C.2 DRAWING LIMITATIONS

(a) The drawings supplied with this contract are not shop or process drawings. The drawings are engineering design drawings, are adequate to permit manufacture, and:

(1) depict the completed (item(s), and

(2) serve as the basis for inspection of the completed item(s).

(b) These drawings DO NOT cover intermediate drawings/specifications or steps in the manufacturing process. As a result, even if all the dimensions and tolerances specified in the engineering design drawing for each individual part are met, a cumulative unacceptable fit for the contract item could result.

(c) The Contractor is responsible for producing the shop or process drawings needed to cover intermediate steps in the manufacturing process.

(d) The Contractor agrees that he has obtained all specifications and drawings necessary to manufacture the items being solicited in accordance with the TDP including all incorporated specifications and drawings. The contractor is responsible for having all drawings and specifications. Delivery delays are not excusable where the contractor asserts that it did not have a specification or drawing and has failed to request, in writing, the specification from either the Contracting Officer or Contract Specialist prior to the solicitation closing date.

(e) Failure to produce an end item with a cumulative fit that conforms to Government drawings, specifications or other supplemental manufacturing documentation, will result in the Contractor being responsible for correcting this condition at no additional cost to the Government and no delivery schedule extension.

C.3 REQUIREMENT FOR AN OPSEC STANDING OPERATION PROCEDURE

/PLAN

(a) The contractor is subject to, at a minimum, the provisions of the current TACOM OPSEC Plan, or other approved U.S. Government OPSEC plan, per AR 530-1, Operations Security. This Plan specifies the government's critical information, why it needs to be protected, where it is located, who is responsible for it, and how to protect it.

(b) The contractor will receive a copy of the Plan at time of award. Local form STA Form 7114 (or similar) will be used to document and record security OPSEC reviews which are conducted by TACOM G3/G2 or individual organizations supporting AT/OPSEC Officers.

(c) The contractor shall identify an individual who will be an OPSEC Coordinator. The contractor will ensure that this individual is OPSEC Level I.

(d) The contractor is not required to produce an OPSEC Plan. U.S. contractors with access to CUI (e.g. technical information, information marked with a distribution statement or CUI or classified information) shall be required to follow an OPSEC Plan. The contractor may choose to follow the TACOM OPSEC plan in lieu of developing a new OPSEC plan. Personnel who have taken the approved OPSEC training within the last 12 months shall be considered compliant.

C.4 OPSEC TRAINING REQUIREMENT

Per AR 530-1, Operations Security, new contractor employees must complete Level I OPSEC training within 30 calendar days of reporting for duty. All contractor employees must complete annual OPSEC awareness training. OPSEC awareness training is available at:

https://securityawareness.dcsa.mil/opsec/index.htm. Within 10 days of completing the training, the Contractor shall provide certificates/proof of completion to the Contracting Officer's Representative (COR), if assigned to the contract, or the Procuring Contracting Officer (PCO).

C.5 CONFIGURATION MANAGEMENT DOCUMENTATION

The Contractor may submit Engineering Change Proposals (ECPs), Requests for Variance (RFVs), and Notices of Revision (NORs) for the requirements in the Government-provided Technical Data Package (TDP).

a. The Configuration Change Management section of SAE EIA-649-1(current revision) Configuration Management Requirement for Defense Contracts, Paragraph 3.3, shall be used for configuration control of material with the following exclusions: paragraph 3.3(3); the second sentence of paragraph 3.3.1.8.1(1).

b. Furnished item(s) shall conform to the approved configuration requirements/revision, unless a Request for Variance (RFV) is processed and approved as provided by Paragraph E. below. The term "Request for Variance" includes Requests for Deviations and Waivers.

c. Value Engineering Change Proposals (VECPs) for cost saving improvements to the TDP should not be processed per SAE EIA-649-1 and should be referred to Section I FAR Clause 52.248-1 - Value Engineering.

W912CH27BA030

https://securityawareness.dcsa.mil/opsec/index.htm

d. All ECPs submitted will be deemed routine. If an ECP is considered as an emergency or urgent;

that justification for the rationale shall be included in the ECP submittal with all applicable supporting documentation.

e. For ECPs, RFVs, or NORs, the Contractor must submit the documentation listed in sub-paragraphs e (i) through e (iii). Failure to submit a complete legible package may result in return of the ECP/RFV/SCN/NOR without processing.

(i) for ECPs, the Contractor shall prepare and deliver the ECP in accordance with (IAW) CDRL A001.

(ii) for RFVs, the Contractor shall prepare and deliver the RFV IAW CDRL A002.

(iii) for NORs, the Contractor shall prepare and deliver the NOR IAW CDRL A003.

f. The Government's acceptance of the data deliverable required by CDRL/DD Form 1423 in e(i)-

(iii) above signifies only that the data satisfies the requirements of the DID and is considered acceptable for Government processing. Acceptance of the data deliverable does not signify "technical approval" of the change proposed by the deliverable and should not be interpreted as authorizing the Contractor to proceed with the work proposed by the change. Disposition of the change (approval/disapproval) will follow acceptance of the CDRL at the Government's sole discretion. Incorporation of an approved RFV or ECP will require execution of a contract modification.

g. The Contractor should direct questions regarding the status of an ECP or RFV to the Procuring Contracting Officer (PCO) and copy the Administrative Contracting Officer (ACO).

h. The submission of an ECP/RFV/SCN/NOR does not affect the required delivery date of the contract.

C.6 Counterintelligence Awareness and Reporting (CIAR); formerly known as Threat Awareness Reporting Program (TARP):

Per AR 381-12, all Department of the Army (DA) personnel (Military/Civilian/Contractor) must complete CIAR training within 30 days of assignment or employment to an organization/contract, and then once every 12 months thereafter pursuant to DoDD 5240.06. DA personnel will complete "Counterintelligence Awareness and Reporting for DoD Employees" - CI116.16, located at https://www.cdse.edu/, to satisfy most Army annual training requirements.

In addition, per AR 381-12 Chapter 5, the following individual(s) must receive an in-person CIAR briefing directly from an ACI Special Agent or a CI-experienced person in addition to the annual training requirement:

a. DA personnel scheduled to travel (official, unofficial, permanent change of station) to or through countries with a high foreign intelligence or terrorist threat level as identified by Defense Intelligence Agency or the Department of State, will receive a special CIAR briefing prior to the travel and will be debriefed upon return. AR 381-12 13 June 2025 11.

b. DA personnel who have security clearances travelling to foreign locations in any duty status must fulfill pre-and-post travel security briefing and debriefing requirements in accordance with the DoD Foreign Clearance Guide and DoDD 4500.54E.

c. DA personnel deploying in support of military exercises or contingency operations will receive a special CIAR briefing prior to departure.

d. DA personnel taking part in bilateral or multilateral engagements with foreign governments or international organizations will receive a CIAR briefing prior to the event.

e. Foreign visitors, personnel, and personal connections. Commanders will coordinate with unit security managers to identify personnel potentially vulnerable to FIE exploitation and ensure they are referred to ACI to receive specialized CIAR briefing.

f. Such personnel will receive foreign intelligence threat briefings prior to foreign travel or event.

g. Personnel with access to Sensitive Compartmented Information and Special Access Programs.

h. Personnel assigned to or supporting defense critical infrastructure or associated assets, pursuant to DoDD 3020.40 and DoDI 5240.19, will receive an in-person special CIAR briefing on an annual basis. Such personnel will notify their local ACI office of all projected foreign travel or foreign visits.

i. Foreign government employment. Current and retired DA personnel seeking employment with foreign government entities will have CIAR training and support made available.

j. Information technology professionals System administrators, privileged users, and those with privileged access that provides an individual capability to alter the properties, behavior, or control of a DoD information system will receive in-person special CIAR briefings on an annual basis.

k. Professional and educational exchange programs with foreign governments.

These briefings will be tailored to the particular risk or threat involved, including methods the person may use to minimize the risk, and will place special emphasis on reporting responsibilities.

Debriefings will be conducted as soon as feasible following completion of travel, duty, or visit to a foreign country, or attendance at a conference with foreign personnel by an ACI Special Agent.

Failure to receive training does not relieve individuals from their reporting responsibilities in chapter 4 of this regulation.

C.7 ADDITIONAL GUIDELINES FOR CONTROLLED UNCLASSIFIED INFORMATION

C.7.1 General: There are types of information that are not classified but that require application of access and distribution controls and protective measures for a variety of reasons. This information is known as controlled unclassified information (CUI). The types of information considered CUI are U.S. Government technical information and information listed at the CUI registry (https://www.

archives.gov/cui/registry/category-list ) . When handling CUI material, all personnel are to comply with these requirements and follow their company policy and/or applicable Non-Disclosure Agreement (NDA) concerning the protection of proprietary information in situations not clearly stated herein.

C.7.2 Technical Information Description: Any recorded information related to experimental, developmental, or engineering works that can be used to define an engineering or manufacturing process, or can be used to design, procure, produce, support, maintain, operate, repair, or overhaul program material. The data may be graphic or pictorial delineations in media (e.g., computer software, drawings, or photographs), text in specifications, related performance or design documents, or computer printouts. Examples of technical information include research and engineering data, engineering drawings, and associated lists, specifications, standards, process sheets, manuals, technical reports, catalog-item identifications, and related information, and computer software documentation.

C.7.3 CUI Information Description: Unclassified Information that requires safeguarding or dissemination controls pursuant to and consistent with applicable law, regulations, and government-wide or LRGWP policies but is not classified under EO 13526, (Classified National Security Information).

C.7.4 CUI Markings All documents containing CUI will carry the CUI markings in accordance with DoDI 5200.48. Discontinue all use of legacy or other markings not permitted or included in either the CUI Registry or DoDI 5200.48. Marking of Technical Information will include the statement provided in the Security Classification Guide. If the contents of the technical document require more than one Distribution Statement, apply the most restrictive statement. This does not preclude additional mandated markings as may be required by the contract.

C.7.5 Protection of CUI Information

C.7.5.1 Access: CUI may be released only to an individual who has a valid need for such access in connection with the accomplishment of a lawful and authorized Government purpose. Further dissemination of such information will be at the discretion of the Government Security Manager. All personnel supporting this contract shall sign a CUI Nondisclosure Agreement prior to gaining access to the information. Personnel no longer requiring access to CUI must dispose (see Disposal below) or surrender any in their possession and terminate future access to it.

C.7.5.2 Storing/Handling: During working hours, take reasonable steps to minimize risk of access to CUI by unauthorized personnel. After working hours, when not in physical possession of the owner, all CUI (whether hardcopy or optical media (e.g., DVDs, CDs) that contain CUI) must be afforded a reasonable degree of physical protection to prevent theft of program information (e.g., store CUI information in locked desks or file cabinets, locked rooms, cable lock laptops, storing in a trunk, storing out of site or similar means). Do not display CUI in public places e.g., airports, airplanes, restaurants). Electronic storing and processing of CUI shall be in accordance with DFARS 252.204-7012 Safeguarding Controlled Defense Information and Cyber Incident Reporting. Do not process CUI on public computers (e.g., those available for use by the general public in kiosks, hotel business centers), public wireless networks or computers that do not have access control. Personally owned computers and personally owned devices are not authorized to process CUI. Portable electronic devices (e.g., smartphones, laptop computers, tablets), nonportable computers, and removable media (e.g., external hard drives, flash drives, USB drives;

not including optical media) must be physically and electronically protected as described in this instruction, DFARS 252.204-7012 and DoDI 8582.01.

C.7.5.3 Dissemination: CUI printed documents and material may be transmitted through mail channels, commercial carrier or hand-carried without formal courier orders. CUI information may be disseminated to DoD personnel and DoD contractors to conduct official business for the program. If dissemination is required outside of DoD personnel or DoD contractors, contact the Government Security Manager for approval. Technical information will follow the release instructions identified in the Distribution Statement. Use secure communications whenever possible; however, land-line telephones are more secure than cellular telephones and should be used whenever available for discussions involving CUI. Transmit voice and facsimile transmissions only when you have a reasonable assurance that only authorized recipients will have access to the transmission. Digital transmission shall comply with the below: All transmission and/or dissemination of CUI (i.e., email and file transfers) must use NIST/NIAP-approved cryptographic products/algorithms, e.g., DoD-approved Public Key Infrastructure Certification or DoD Safe Exchange at https://safe.apps.mil/ . These are available at http://iase.disa.mil/pki/eca or http://csrc.

nist.gov/groups/STM/cmvp/documents/140-1/140val-all.htm . This encryption requirement includes communications that contain passcodes to teleconferences or web conferences where there is a reasonable expectation that CUI may be discussed. When encryption is not available, a government collaborative suite (aka Integrated Digital Environment [IDE]) must be used to transmit

CUI.

C.7.5.3.1 Contractor-hosted collaborative suites may be used for digital transmission and/or dissemination of CUI by personnel not located on a government backbone (e.g., NIPRNET), provided the following conditions apply: 1) Use only NIST/NIAP-approved cryptographic products /algorithms. The latest validation lists may be obtained at http://iase.disa.mil/pki/eca or http://csrc.

nist.gov/groups/STM/cmvp/documents/140-1/140val-all.htm ; and, 2) Use an internally hosted service that does not use a thirdparty collaborative suite service provider.

C.7.5.3.2 Do not post CUI to web pages that are publicly available or have access limited only by domain/IP restrictions. As permitted by other contract provisions, CUI may be posted to web pages that control access through the use of a DoD approved Public Key Infrastructure Certification and that provide protection via use of secure sockets, or other equivalent technologies. These are available at http://iase.disa.mil/pki/eca .

C.7.5.3.3 As new technologies become available in the electronics arena, care should be given to providing a reasonable degree of protection from known vulnerabilities.

C.7.5.3.4 The Internet is Public Access. CUI must be reviewed and officially approved by the TACOM Public Affairs Officer for public release before placing on the Internet. This is not applicable when the Internet is used for e-mail transmissions and encryption is used as noted above.

C.7.5.4 Disposal: The contractor shall ensure any covered defense information provided by the Government under this contract is destroyed or sanitized from contractor-owned media and reported in accordance with NIST Special Publication (SP) 800-88, Rev 1, Guidelines for Media Sanitization , December 2014, and in accordance with Section 2002.14 of Title 32, CFR. Destroy CUI documents may be destroyed by means approved for classified information or by any other means making it unreadable, indecipherable, and unrecoverable.

C.7.5.5 Report of Loss of CUI: Report any loss of CUI to the Government Security Manager. Initial reports shall be made as expeditiously as possible in all cases within 72 hours of discovery. If additional information is required after submission and review of the initial report, guidance will be provided at that time. Initial report content shall include the following information as available.

C.7.5.5.1 Applicable dates, including dates of compromise and dates of discovery.

C.7.5.5.2 Threat methodology, including all known resources used (e.g. IP addresses, domain names, software tools.

C.7.5.5.3 Account of what actions the threat(s) may have taken on victim system/network.

C.7.5.5.4 What information may have been compromised or lost, and its potential impact on government programs

C.8 NOTICE OF LIGHT PHOSPHATE COATING REQUIREMENT

The following requirements regarding light phosphate pretreatments and associated coating systems are applicable to this solicitation and any resultant contract in addition to those requirements set forth in Federal Specification TTC490, Type I, Cleaning Methods for Ferrous Surfaces and Pretreatments for Organic Coatings. All baseline testing, validation, and quality requirements mandated by TTC490 remain fully applicable and mandatory. Except where modified herein, all testing criteria, execution methods, and process verification frequencies shall conform to TTC490 and all other referenced or applicable specifications.

a. Written procedures developed in accordance with the TT-C-490 "Procedure Approval (Types I, II, and V)" shall be submitted in accordance with Contract Data Requirements List (CDRL A004).

The active contract number shall be cited on all procedures submitted for review and approval.

The written procedures shall describe, in sufficient detail all cleaning, pretreatment, and painting processes, including equipment, process control ranges, inspection and test methods, and test frequencies. In addition to the baseline specification requirements of TTC490, the Contractor shall document, define, and incorporate the following elements within the submitted procedure:

1.

2.

3.

4.

5.

6.

1.

Product name and manufacturer of each CARC paint (primer/topcoat), with clear traceability to the applicable Qualified Products Database (QPD) or Qualified Products List (QPL) at

. https://qpd.dla.mil/ Dry film thickness range for CARC primer and topcoat in accordance with MIL-DTL-53072 and any applicable drawing requirements, including the methods and equipment used for thickness measurement and how verification of dry film thickness is documented.

Paint adhesion testing methodology for the CARC system, referencing ASTM D3359, Method B, including sampling strategy (e.g., minimum number of specimens/coupons per shift), test locations (primer to substrate and primer/topcoat interface), and the acceptance rating to be applied.

Salt spray testing of parts or representative specimens/coupons with light phosphate pretreatment and primer, performed in accordance with ASTM B117 and TTC490, identifying within the procedure the required exposure duration, test frequency, and performance criteria.

Color verification parameters for CARC paint, citing the specified color number or chip number in accordance with SAE AMS-STD-595. 6.

Cure verification parameters for CARC paint utilizing the solvent wipe method, including the manufacturer of the acetone or methyl ethyl ketone (MEK) solvent utilized.

b. Preproduction validation panels shall be prepared and tested in accordance with TTC490.

c. Test and verification frequencies shall be clearly identified in the written procedures and supporting work instructions. Test frequencies shall be in accordance with TTC490, MILDTL53072, and any other applicable specifications unless specifically modified or supplemented below. Where a test frequency is stated both in TTC490 and this narrative, the frequency requiring the greater number of tests within the defined unit of production or time shall apply. Failure of any test shall result in rejection of the entire lot back to the last passing test.

Topcoat cure verification shall be performed at least once per production day by solvent wipe in accordance with MILDTL53072.

C.9 ACQUISITION OF MANUFACTURER'S PART NUMBER: COMPONENTS

One or more of the drawings for part of the contract item set forth in the Schedule and in the Technical Data Package specify manufacturer's part numbers. Since complete Government technical data for such part or parts are not available, it is understood that the Contractor, by accepting this contract, agrees to furnish only the listed manufacturer's part number(s) for those components of the contract item. It is further understood and agreed that references to manufacturer's part numbers herein shall be deemed to include all changes or revisions thereto which the approved manufacturer has made effective as of the first date of delivery of any of the items under this contract; provided, that no change or revision that affects the interchangeability (ability to be interchanged with previous parts and to match with all mating parts when assembled)

W912CH27BA030

https://qpd.dla.mil/ of the listed manufacturer's part shall be incorporated into the contract item without the prior written approval of the Procuring Contracting Officer.

*** END OF NARRATIVE 1 ***

Requirements This solicitation is intended to result in the award of a single Firm Fixed Price Contract for supplies specified.

Section D - Packaging and Marking

D.1 PACKAGING REQUIREMENTS (SPECIAL PACKAGING INSTRUCTIONS)

(a) Military preservation, packing, and marking for this contract/order shall be accomplished in accordance with the specific requirements identified below, all the applicable requirements of, MIL- STD-2073-1, and the Special Packaging Instruction, see below.

(1) LEVEL OF PRESERVATION: Military

(2) LEVEL OF PACKING: B

(3) QUANTITY PER UNIT PACKAGE: 001

(4) SPECIAL PACKAGING INSTRUCTION NUMBER: 12916856

(a) REVISION: A

(b) DATE OF REVISION: 03 APRIL 2019

(c) THE REQUIRED SPECIAL PACKAGING INSTRUCTION (SPI) IS AVAILABLE ON THE WEB AT THE FOLLOWING URL: See Section J, Attachment 0002 SPECIAL PACKAGING

INSTRUCTIONS (SPI) 12916856

(Note: You must have the Adobe Acrobat reader installed on your PC to view the SPI. See Adobe's website (http://get.adobe.com/reader/) for information on obtaining the latest version of the reader. If you're experiencing problems opening the Special Packaging Instructions in Adobe .

PDF images using Internet Explorer, try the following: Go to "Tools," then "Internet Options." Click on the "Advanced" tab. Scroll down to the "Security" section. Uncheck "Do not save encrypted pages to disk." Click "Apply." Click "OK.")

(b) Unitization: Shipments of identical items going to the same destination shall be palletized if they have a total cubic displacement of 50 cubic feet or more unless skids or other forklift handling features are included on the containers. Pallet loads must be stable, and to the greatest extent possible, provide a level top for ease of stacking. A palletized load shall be of a size to allow for placement of two loads high and wide in a conveyance. The weight capacity of the pallet must be adequate for the load. The preferred pallet is a 40 x 48 inch, 4-way entry pallet although variations may be permitted as dictated by the characteristics of the items being unitized. The load shall be contained in a manner that will permit safe handling during shipment and storage.

(c) Marking:

(1) In addition to any special markings called out on the SPI, all unit packages, intermediate packs, exterior shipping containers, and as applicable, unitized loads shall be marked in accordance with MIL-STD-129). The contractor is responsible for application of special markings as discussed in the Military Standard regardless of whether specified in the contract/order or not. Special markings include, but are not limited to, Shelf-life markings, structural markings, and transportation special handling markings. The marking of pilferable and sensitive materiel will not identify the nature of the materiel.

(2) When an item is assigned a Unique Item Identifier (UII) as indicated by the inclusion of contract clause DFARS 252.211-7003, refer to the DoD Guide to Uniquely Identifying Items (available at: https://www.acq.osd.mil/dpap/pdi/uid/guides.html) for development of the UII and MIL- STD-129 for UII package marking requirements. Contractors must verify the RFID and UII clauses cited above are included in this solicitation/contract.

(d) Heat Treatment and Marking of Wood Packaging Materials (WPM):

(1) In accordance with DOD 4140.65-M and the requirements of the International Standards for Phytosanitary Measures 15 (ISPM), "Regulation of Wood Packaging Material in International Trade," current edition, (hereinafter "ISPM 15"), the following commercial heat treatment and marking process has been approved by the American Lumber Standards Committee (ALSC) and is required for all Wood Packaging Material (WPM). Foreign manufacturers shall comply with ISPM 15, and have the WPM heat treatment and marking verified in accordance with their National Plant Protection Organization's compliance program.

(2) Boxes/pallets and any wood used as inner packaging made of non-manufactured wood shall be heat-treated. All WPM using a conventional steam or dry kiln heat chamber (treatment code for the mark: HT) shall be heat treated to a minimum core temperature of 56 degrees Celsius for a minimum of 30 minutes, and certified by an agency accredited by the ALSC in accordance with Wood Packaging Material Policy and Wood Packaging Material Enforcement Regulations (see URL: http://www.alsc.org).

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .