TDP.pdf
PDF 30 KB Posted
- Attached to
- Sources Sought: NOZZLE, FUEL AND OIL
- Solicitation number
- W912CH26R0067
- Issued by
-
Department of the Army
About this file
This is an engineering drawing specification for military aircraft pressure refueling nozzles. The document provides detailed configuration options for three nozzle variants identified by National Stock Numbers (NSNs), all of which must conform to SAE AS 5877 standards.
The three nozzle configurations are: NSN 4930-01-440-1085 (Dash -1), NSN 4930-01-489-5927 (Dash -2), and NSN 4930-01-369-9821 (Dash -3). All three are classified as Type 1, Class D nozzles with 2-inch inlet couplings, 100-mesh strainers, and stick-type handles. The primary differences include coupling type (unisex versus female cam-lock), pressure regulator specifications (45 PSI or none), and bonding cable length and configuration (15-foot cable with both jack-type plug and alligator clip for Dash -1; 3-foot cable with only jack-type plug for Dashes -2 and -3). Coupling specifications require non-valved unisex couplings per A-A-59377 and cam-lock couplings per A-A-59326. Metal components shall be military tan or sand color unless the manufacturer's standard color applies to both commercial and military models, while non-metal components shall be black or the manufacturer's standard color. The drawing was approved for procurement on 09 JAN 2006 and is approved for public release with unlimited distribution.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sources Sought Notice W912CH-26-R-0167.docx | DOCX document | |
| TDP.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
D
C
B
A
D
C
B
A
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
DRAWN BY
CHECKED BY
CONTRACT NO.
DATE
DATE
DESIGN APPROVAL
DATE
APPROVED FOR PROCUREMENT
DO NOT SCALE THIS DRAWING
FOR INTERPRETATION OF DRAWING DOD-STD-100 APPLIES
REMOVE BURRS AND
BREAK SHARP EDGES
SHARP EDGES TO
FILLET RADII TO
MATERIAL
UNLESS OTHERWISE SPECIFIED DIM / TOLERANCES ARE IN.
ONE PLACE (.X) __
TWO PLACE (.XX) __
THREE PLACE (.XXX) __
ANGLES __
THIRD ANGLE
PROJECTION
U.S. ARMY TANK AUTOMOTIVE COMMAND
WARREN, MICHIGAN 48397-5000
SIZE CODE DWG. NO.
SCALE NONE SHEET OF
ZONE LTR DESCRIPTION
REVISIONS
DATE APPROVED
DATE 1
DISTRIBUTION STATEMENT
APPROVED FOR PUBLIC RELEASE
DISTRIBUTION IS UNLIMITED
MILITARY AIRCRAFT PRESSURE REFUELING NOZZLES WITH NSN’s SHOWN SHALL CONFORM TO SAE AS 5877 AND THE OPTIONS OUTLINED BELOW.
NOZZLE NSN DASH TYPE CLASS INLET TYPE STRAINER PRESSURE 45 DEGREE HANDLE BONDING COLOR
NUMBER (COUPLING) REGULATOR ELBOW TYPE CABLE
4930-01-440-1085 -1 1 D-1R 2” UNISEX * 100 MESH 45 PSI YES STICK 15 FT. ** ***
4930-01-489-5927 -2 1 D-1R 2” UNISEX * 100 MESH 45 PSI YES STICK 3 FT. ** ***
4930-01-369-9821 -3 1 D-1 2” FEMALE * 100 MESH NONE YES STICK 3 FT. ** ***
* UNISEX COUPLINGS SHALL BE NON-VALVED IN ACCORDANCE WITH A-A-59377 AND CAM LOCK COUPLINGS SHALL BE IN ACCORDANCE WITH A-A-59326.
** 15 FT. BONDING CABLE SHALL HAVE BOTH JACK TYPE PLUG AND AN ALLIGATOR CLIP. 3 FT. CABLES SHALL HAVE ONLY A JACK TYPE PLUG.
*** COLOR OF NOZZLE METAL COMPONENTS SHALL APPROXIMATE THE MILITARY TAN OR SAND COLOR EXCEPT WHERE THE COLOR IS THE MANUFACTURER’S STANDARD COLOR FOR BOTH COMMERCIAL AND MILITARY NOZZLES. NON-METAL COMPONENTS SHALL BE BLACK OR THE MANUFACTURER’S STANDARD COLOR.
19207
CAM -LOCK
MILITARY AIRCRAFT PRESSURE
REFUELING NOZZLE CONFIGURATION
OPTIONS
12377200
J.A.M.
T.F.L.
T. LEE
09 JAN 2006
09 JAN 2006
L. TURNIPSEED
09 JAN 2006
09 JAN 2006
BREAK SH
MATERIA
SE
File details come from the government source that posted it. Updated .