W912BV21Q0046 Amendment 0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Solicitation is hereby amended to remove references to Made in USA:

- Extend the Solicitation

- Extend Bidder's Inquiry

- Correct the Price Schedule

- Correct the SOW

- Include SECTION I DFARS 252.225-7036 ALT I in full text

1. CONTRACT ID CODE PAGE OF PAGES

1 12

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 09-Apr-2021

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W912BV21Q0046

X 9B. DATED (SEE ITEM 11)

16-Mar-2021

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

09-Apr-2021

CODE

CONTRACTING DIV

US ARMY CORPS OF ENGINEERS, TULSA DISTRICT

2488 E. 81ST STREET

TULSA OK 74137-4290

W912BV 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912BV21Q0046

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 09-Apr-2021 02:00 PM to 23-Apr-2021 02:00 PM.

The following have been modified:

INSTRUCTIONS TO OFFERORS

Instructions to Offerors

MAIL, FAX, EMAIL or HAND DELIVER YOUR DOCUMENTS

Do not include excess information, such as audio-visual materials, electronic media, CD’s, thumb drives, etc. or pages of the solicitation that do not contain information provided by the perspective offeror. NO cross-outs or strike-through marks. Submit a legible quote with no correction marks.

EMAIL – Preferred Method

Emailed quotes must be received in a supported Adobe or Microsoft Office file format. These formats are the only acceptable methods of submitting a quote electronically. Cloud storage providers, google docs, web-based drop boxes, OneNote/OneDrive, URLs, web-based format, or any other virtual/web-based memory service are NOT acceptable methods of submitting a quote electronically. All documents must be attached in one file. Reference the solicitation number in the subject line. Send quotes to E-mail address CESWT‐CT‐SS‐Quotes@usace.army.mil and copy Christopher.T.Wright@usace.army.mil. Ensure your quote is received before the due date and time. For your quote to be considered responsive, all required materials must be received before the due date and time. If all required materials are not received, your quote will not be considered.

FAX or MAIL

Include a cover sheet that references the Contract Specialist – Chris Wright – and the solicitation number. Fax number is (918)669-7436. When submitting through mail, ensure you clearly mark the envelope to:

U.S. Army Corps of Engineers, Tulsa District Chris Wright, CESWT-CT-E 2488 E. 81st Street Tulsa, OK 74137-4290

Clearly mark the envelope in the lower left-hand corner with the solicitation number, W912BV21Q0046. All pages should be numbered. Use only 8 ½” x 11” paper for fax or mail submissions. Do not use foldouts (e.g., 11” x 14” or 11” x 17” sheets). Do not use a font size smaller than 10, or condensed print for any submission. Times New Roman or Arial Font are the only acceptable fonts. All page margins must be at least 1 inch wide but may include headers and footers. Illegible handwritten quotes will not be considered. Typed quotes are highly encouraged and the preferred method. Do not use spring clamps, staples, or exceed the recommended capacity of the fastener or binder.

Do not use plastic multi-hole/spiral binding systems, heat binding systems, or other systems which do not facilitate the ready insertion of additional pages or removal of pages. DO NOT use tabbed dividers, flagged tabs, or any divider that extends beyond the paper size to separate sections. The pages must be able to be removed from their binding without ripping or tearing. Allow enough time to submit your quote before the due date and time.

HAND DELIVER

If your submission will be hand-carried, please provide notification to the Contract Specialist, at least one working day in advance, by calling (918) 669-7277 or e-mailing Christopher.T.Wright@usace.army.mil, as unescorted visitors are not allowed in the Contracting Division offices. Please consider that upon arrival, visitors must go through security check points on the 16th floor of the 20-story Building. Offerors can only submit their documents to the Contract Specialist or a Contracting Officer of the Tulsa District Office. The Tulsa District Office is in the 20-story building of the CityPlex towers, address below:

U.S. Army Corps of Engineers, Tulsa District 2488 E. 81st Street Tulsa, OK 74137-4290

Please submit the following documents:

1) Complete a signed copy of the first page of the solicitation and all amendments, including CAGE code.

2) Complete the pricing schedule provided in the solicitation.

3) Complete the sub-contractor data provided in the solicitation - your quote must identify the business size and percentage of work to be completed by the prime contractor; and the business name, address, the percentage of work to be completed by the sub-contractor and business size of any sub-contractors, if applicable, based on the NAICS code identified. Offerors must clearly identify whether a sub-contractor(s) will be performing work, the percentage of work to be performed by each sub-contractor, and the socio-economic category into which each identified sub-contractor falls. (FAR 52.219-14 LIMITATIONS ON

SUBCONTRACTING (DEVIATION 2020-O0008) (MAR 2020).

4) Complete all FAR Clauses, with applicable blanks filled-in from SECTIONS I, K, and L.

5) Complete and return the Representations and Certifications in Section K, unless already completed in the

System for Awards Management at https://www.sam.gov/.

6) Contractor must respond to the representation in Section K: FAR 52.204-24 and 52.204-26. Failure to respond to these provisions will deem your offer non-responsive and unawardable.

7) Provide place of manufacture for all items on pricing/bid schedule.

Funds are not presently available for this acquisition. No contract award will be made until appropriated funds are made available.

Quotes should be valid through 15-May-2021.

INQUIRIES – OFFEROR’S QUESTIONS AND COMMENTS

USE OF BIDDER’S INQUIRY

Prospective offerors shall submit questions and inquiries related to this solicitation in accordance with the following (no other means of questions or inquiries will be answered except through Bidder Inquiry):

For information related to amendments, and the dates set for receipt of proposals, please check https://beta.sam.gov.

Contractual and Technical inquiries and questions relating to proposal procedures are to be submitted via Bidder Inquiry in ProjNet at https://www.projnet.org/projnet.

1. To submit and review bid inquiry items, offerors will need to be a current registered user or self‐ register into the system. To self‐register go to the aforementioned web page and click on the BID tab.

Select Bidder Inquiry, select agency USACE, and enter the Bidder Inquiry Key for this solicitation listed below, your e‐mail address, and then click login. Fill in all required information and click create user. Verify that information on next screen is correct and click continue.

2. From this page, you may view all bidder inquiries or add an inquiry.

3. Bidders will receive an acknowledgement of their question via e‐mail, followed by an answer to their question after it has been processed.

The Solicitation Number is: W912BV21Q0046

The Bidder Inquiry Key is: A6C34V-YUJ2CF

The Bidder Inquiry System will be unavailable for new inquiries 10:00 AM CST 2:00 PM CST on Monday, 05 19 April 2021 in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary.

4. Offerors are requested to review the specification in its entirety and review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry.

5. The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800‐428‐HELP.

6. Offers will NOT be publicly opened. Information concerning the status of the evaluation and/or award will NOT be available after receipt of proposals. Do not attempt to contact USACE personnel regarding the status of the solicitation and/or contract. When the award is made, all offerors (successful and unsuccessful) will be notified. The anticipated award date is an estimate only and is subject to change without notice.

7. The point of contact for this solicitation is:

Contract Specialist: Chris Wright Telephone: 918‐669‐7277 E‐mail: Christopher.T.Wright@usace.army.mil

PRE-PROPOSAL/SITE VISIT CONFERENCE

A pre-proposal/site visit is not scheduled at this time.

ANTITERRORISM AND OPERATIONS SECURITY REQUIREMENTS

The Government will provide the successful offeror with the required Army iWatch Antiterrorism Briefing documentation within two (2) business days of Contract Award.

In accordance with AFARS 5132.702(a)(ii)(B): Funds are not presently available for this acquisition. No contract award will be made until appropriated funds are made available.

SECTION B - SUPPLIES OR SERVICES AND PRICES

BID SCHEDULE

BID SCHEDULE

Outboard Motor Procurement and Installation

Ft Gibson Lake, Oklahoma

Item No Description Quantity Price

BASE

0001 Remove two existing 115 hp Evinrude E-Tech 1 $__________ outboard motors from work barge and provide and install two new USA-made 115hp 4-stroke outboards with controls.

Place of Manufacture________________

Country of Origin ________________

Brand Name ________________

0002 Provide and install three new marine 800 CCA 1 $__________ minimum deep cycle batteries.

Place of Manufacture________________

0003 Provide and install one new 3-bank minimum 1 $__________ automatic on-board battery charger.

Place of Manufacture________________

TOTAL OFFER $__________

NOTE: Offer shall include all labor, fuel, tools, equipment, materials, supplies, transportation (FOB DestinationOrigin), incidentals, and all other necessary items to complete the tasks stated in the scope of work.

Self-Performing:

Name of Prime Contractor Business Size Percentage of Work To Be of Prime contractor Completed by Prime Contractor

Sub-Contractor (if applicable):

Name of Sub-Contractor Address of Subcontractor Business Size Percentage of and Socioeconomic Work to be Category Completed by Sub-Contractor

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

SCOPE OF WORK

Bid Proposal for Purchase and Installation of Motors on Government-owned Work Barge.

1.1 SCOPE OF WORK

Bidders are encouraged to perform a site visit to the Corps of Engineers Fort Gibson Lake Office to inspect the work barge before submitting bid; however, due to current COVD conditions, a formal site visit may not be held for this project (see Instructions to Offerors for further details). All questions/inquiries shall be made through the ProjNet Bidder’s Inquiry (see Instructions to Offerors for details). The successful offeror shall supply and install two (2) new USA-made 115 horsepower four-stroke motors and all new necessary wiring, steering systems, controls, gauges, three marine deep-cycle minimum 800 CCA batteries, and one new 3-bank minimum on-board automatic battery charger. All removed items and equipment from the barge (motors, batteries, etc., must be returned to the Fort Gibson Lake Office.) The contractor must be located within a 120150-mile radius in order to perform warranty work. The contractor will be required to perform the following:

Remove two (2) existing 115 Evinrude E-Tech outboard motors including all supporting wiring harnesses, controls, and gauges.

Provide and install two (2) new USA-made 115 hp four-stroke outboard motors with stainless steel propellers, all supporting wiring harnesses, steering systems, controls, and gauges. (Please note there is no brand name requirement)

Provide and install three (3) new marine deep-cycle 800 CCA minimum batteries. One battery will be wired to each outboard engine; and one battery will be wired to the existing on-board winch. All three batteries will be installed in the stern battery box, and all battery connections will be made above deck.

Provide and install a new 3-bank minimum automatic on-board battery charger to charge all three batteries independently.

Contractor is responsible for retrieving the work barge for installation of motors and equipment. Contractor is responsible for delivery of completed work barge to the Fort Gibson Lake office and provide on-water testing to insure proper operation of motors, steering systems, controls, and all gauges.

Contractor shall provide a written minimum one-year warranty for the work performed.

Contractor shall be responsible for any and all damage while in possession of government-owned property.

1.2 BASIS FOR PAYMENT

The contractor may invoice for payment after all work has been completed, inspected, and accepted by the Government. Contractor’s invoice shall include, as a minimum, contractor name, contract number, invoice number, and date. Mail, email, fax, or hand deliver invoice and other required forms to: Corps of Engineers, Ft Gibson Office, 8568 State Hwy 251A, Ft Gibson, Ok. 74434

1.3 WORK HOURS

Work hours will be based on regular work week of 40 hours.

1.4 COMPLETION TIME

Work shall be completed within 30 calendar days after award of contract. Barge will be available for pickup on its own trailer from the Fort Gibson Lake Office.

1.5 SAFETY REQUIREMENTS

The contractor shall comply with Corps of Engineers Safety and Health Requirements Manual, EM3851-1 Current Edition, http://www.usace.army.mil/SafetyandOccupationalHealth/SafetyandHealthRequirementsManual.aspx, and all applicable Federal, State, and local safety codes and practices. It is the contractor’s responsibility to ensure public safety during the duration of the contract.

1.6 COORDINATION OF WORK

All work shall be coordinated with Government Personnel provided at time of award.

PART 2 – PRODUCT

2.1 PRODUCT SPECIFICATIONS

a. Two (2): new USA-made 115 horsepower four-stroke outboard motors with stainless steel propellers, all new supporting wiring harnesses, steering systems, controls, and gauges.

b. Three (3): new marine 800 CCA minimum deep-cycle batteries.

c. One (1): three-bank (3-bank) minimum automatic marine on-board battery charger.

Two (2) new USA made 115 hp four stroke outboard engines with the following minimum specifications to replace existing outboard engines:

HP @ Prop 115 kW @ Prop 84 Max RPM (WOT) 5000-6000 Cylinder/Configuration In-line 4, 8-valve, Single overhead cam (SOHC) Displacement (cc) 2065 (2.1L) Bore & Stroke (mm) 90 x 81 Cooling System Water-cooled w/thermostat Ignition System Electronic Starting Electric (Turn-Key) Gear Shift F-N-R Alternator Amp 35-amp (441 Watt) Stator w/water-cooled voltage regulators Trim System Power trim and tilt Fuel System Computer controlled sequential multi-port Electronic Fuel Injection (EFI) Corrosion Warranty 3 Years

2.2 MATERIALS / PARTS

The contractor shall furnish all materials and supplies required to complete this task. All parts shall be new and undamaged.

2.3 DELIVERY AND STORAGE

Contractor is responsible for proper movement and storage of all Government material. All material will be retrieved and properly stored to avoid damage at contractor facilities and returned to the site undamaged upon completion.

Materials that are damaged during contractor transportation or improper storage shall be replaced at no cost to the government. The barge is an aluminum Monarch work barge, approximately 24 feet long and 8 feet wide, and is loaded on a bumper pull trailer with a 2 5/16-inch ball hitch. The trailer is roadworthy with two axles, one spare tire, and a 7-pin trailer electrical connection.

3.2 TESTING

Once motors have been installed, engines shall be tested to ensure all linkage, gages, fluids, and engine parameters operate as required by motor specifications. Contractor shall fully test engines and set running parameters, run engines to operational temperature to insure proper operation and function. Check for leaks and make any additional repairs to ensure engines are performing as required by engine parameters. Contractor shall provide all test results to the Government on the Contractor’s internal forms or letterhead.

3.3 WARRANTY

A one-year warranty shall be provided from the date of acceptance to include parts, labor, equipment, and installation. The motors shall be provided with full manufacturer’s warranty effective from the date of delivery and acceptance.

Photos of the Government work barge will be provided as an attachment in the solicitation.

SECTION I - CONTRACT CLAUSES

The following were previously included by reference and are now included by full text:

252.225-7036 BUY AMERICAN-- FREE TRADE AGREEMENTS--BALANCE OF PAYMENTS PROGRAM-

- ALTERNATE I (DEC 2017)

(a) Definitions. As used in this clause--

Bahrainian end product means an article that--

(i) Is wholly the growth, product, or manufacture of Bahrain; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Canadian end product means an article that--

(i) Is wholly the growth, product, or manufacture of Canada; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Canada into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Commercially available off-the-shelf (COTS) item--

(i) Means any item of supply (including construction material) that is--

(A) A commercial item (as defined in paragraph (1) of the definition of commercial item in section 2.101 of the Federal Acquisition Regulation);

(B) Sold in substantial quantities in the commercial marketplace; and

(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Domestic end product means--

(i) An unmanufactured end product that has been mined or produced in the United States; or

(ii) An end product manufactured in the United States if--

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that--

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Free Trade Agreement country means Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore;

Free Trade Agreement country end product means an article that--

(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Moroccan end product means an article that--

(i) Is wholly the growth, product, or manufacture of Morocco; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Panamanian end product means an article that--

(i) Is wholly the growth, product, or manufacture of Panama; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Peruvian end product means an article that--

(i) Is wholly the growth, product, or manufacture of Peru; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Australia Austria Belgium Canada Czech Republic Denmark Egypt Estonia Finland France Germany Greece Israel Italy Japan Latvia Luxembourg Netherlands Norway Poland Portugal Slovenia Spain Sweden Switzerland Turkey

United Kingdom of Great Britain and Northern Ireland.

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means--

(i) An unmanufactured end product mined or produced in a qualifying country; or

(ii) An end product manufactured in a qualifying country if--

(A) The cost of the following types of components exceeds 50 percent of the cost of all its components:

(1) Components mined, produced, or manufactured in a qualifying country.

(2) Components mined, produced, or manufactured in the United States.

(3) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(B) The end product is a COTS item.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country, Canadian, or other foreign end products in the Buy American--Free Trade Agreements--Balance of Payments Program Certificate--Alternate I provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or a Canadian end product, the Contractor shall deliver a qualifying country end product, a Canadian end product, or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(End of clause)

(End of Summary of Changes)