AHA_Mowing_Operation_(fill_in).pdf
PDF 155 KB Posted
- Attached to
- CANTON MOWING Federal contract opportunity
- Solicitation number
- W912BV17Q0088
About this file
AHA Mowing Operation
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| W912BV17Q0088_Amendment_0001_RFQ_Canton_Mowing.pdf | ||
| BLANK_Price_Schedule-_5_years.xlsx | XLSX spreadsheet | |
| W912BV17Q0088_RFQ_Canton_Mowing.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/go/reader_download.
For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.
ACTIVITY HAZARDS ANALYSIS
SWT Form 385-1 (Revised) April 2008 S e v e r i t y Risk Assessment Code Matrix Assess the impact of each hazard in terms of potential loss and cost, based on the probability and severity should an incident occur.
E = Extremely High Risk H = High Risk Probability M = Moderate Risk L = Low Risk E E H H M E H H M L H M M L L M L L L L
JOB STEPS
Break down the job into individual steps, e.g., mobilization, erect forms, erect scaffolding, install reinforcement bar, remove forms, demobilization.
HAZARDS
Identify the hazards, what are the man, machine, and environmental hazard factors of an operation. Note: include hazards that could potentially change the risk, such as weather, changing site conditions, abnormal operating procedures, etc. Do a change analysis when site conditions change.
ACTIONS TO ELIMINATE OR MINIMIZE HAZARDS
List the controls needed to eliminate or reduce the risks. Controls can be in the form of educational controls (training), physical controls (barriers, guards, signs, etc.), Administrative Controls, Personal Protective Equipment, or Engineering Controls. Risk avoidance is another alternative, are there ways to do the job differently so that risks aren't encountered.
RAC
EQUIPMENT
List equipment needed for the job.
TRAINING
List any specialized training or certifications needed for the job.
INSPECTION
List any inspection requirements, before, during, or after the job is completed.
8.0.1291.1.339988.308172 Canton L
| ResetButton1: |
| PrintButton1: |
| Date AHA form was prepared or last revised.: |
| List project name: |
| For multiple job steps, use the highest obtained Risk Code. Note: the risk code is the residual risk after controls have been implemented. The following codes require the appropriate personnel approvals: |
E = Division Commander (E = Extremely High Risk). Equates to loss of ability to accomplish mission if hazards occur during mission.
H = District Commander (H = High Risk). Results in significant degradation of mission capabilities if hazards occur during mission.
M = Program Manager, Project Manager, Project Engineer (M = Moderate). Minor injury, lost workday accident, compensable injury or illness, minor system damage, or minor property damage.
L = First Line Supervisor, Quality Assurance Representative (L = Low). Little or no impact on mission accomplishment.:
| Continuously experiences or occurs very often. Likely to occur often in the life of an item with a probability of occurrence greater than 10-1 in that life.: |
| Occurs frequently. Several times in the life of an item with a probability of occurrence less than 10-1 but greater than 10-2 in that life.: |
| Occurs several times. Likely to occur some time in the life of an item with a probability of occurrence less than 10-2 but greater than 10-3 in that life.: |
| Unlikely but can reasonably be expected to occur. Unlikely but possible to occur in the life of an item with a probability of occurrence less than 10-3 but greater than 10-6 in that life.: |
| Unlikely to occur but possible. So unlikely, it can be assumed occurrence may not be experienced with a probability of occurrence less than 10-6 in that life.: |
| Click to add row: |
| Click to delete row: |
| Could result in injury or occupational illness resulting in one or more lost work days, loss exceeding $10K but less than $200K, or mitigable (minor) environmental damage without violation of law or regulation where restoration activities can be accomplished for the environment. Lost day due to injury or illness not exceeding 3 months (accident risk).: |
| Could result in injury or illness not resulting in a lost work day, loss exceeding $2K but less than $10K, or minimal environmental damage not violating law or regulation. A first aid or minor medical treatment (accident risk). Slight equipment or system damage but fully functional and serviceable. Little or no property or environmental damage.: |
| Describe specific activity in which this AHA form is being prepared for, i.e., Unit 2 Annual Maintenance.: Mowing Operation |
| Give location, i.e., McNary Dam Fish Facility.: Canton Lake |
| Who prepared this analysis?: |
| JobSteps: Transporting equipment to and from the worksite |
| JobSteps: Inspect all equipment |
| JobSteps: Fueling Equipment |
| JobSteps: Mowing |
| JobSteps: Getting on/off equipment |
| JobSteps: Equipment Maintenance |
| JobSteps: Trimming/Edging Equipment |
| JobSteps: Terrain |
| JobSteps: Traffic |
| JobSteps: Rocks and Debris |
| JobSteps: Weather |
| JobSteps: Lifting |
| Hazards: Vehicle accident; Trailer accident; equipment loading/unloading accident |
| Hazards: Missing guards or other safety devices; faulty or defective equipment |
| Hazards: Contact with petroleum products; fire |
| Hazards: Cuts and major trauma; discharge of objects from mower; vehicle rollover; accidents with motor vehicles |
| Hazards: Slips, trips, falls |
| Hazards: Damage/Injury to personnel, property, equipment |
| Hazards: Personnel Injuries |
| Hazards: Equipment Rollover |
| Hazards: Vehicle Coalitions |
| Hazards: Damage/Injury to people, property, equipment |
| Hazards: Personnel Injury |
| Hazards: Personnel Injury |
| Actions: Operators must be experienced, qualified, and trained to operate the equipment. A signal person on the ground will be used during loading/unloading. Equipment will be equipped with rollover protection structures. Operators will wear their seat belts at all times during operation of equipment. Trailer safety chains will be properly placed on towing vehicle when transporting equipment. Assure equipment trailer is level and truck and trailer brakes are set. Check for overhead clearances(powerlines, tree limbs, etc.). Check for objects or obstacles behind equipment before backing. Trailer bed and ramps shall be clean of oil, gravel, dirt, or materials that could become slippery or cause the equipment being unloaded to lose traction. Equipment will be lined up with trailer so it can be loaded with a minimum amount of adjustment when on the ramp or trailer. |
| Actions: No vehicle will be placed into service until an inspection is perfomred and any deficiencies are corrected. Vehicles will be inspected prior to start of work each workday. Make sure all guards and safely devices are attached and are operating properly. Make sure all operating systems are operating properly |
| Actions: Equipment shall not be allowed to run during refueling. An operable fire extinguisher shall be available during refueling. Avoid contact with petroleum products. Clean up all spill immediately. Allow hot equipment to cool before refueling. |
| Actions: Proper clothing shall be worn at all times (long trousers, minimum of short sleeves shirt, hard hats, safety toe shoes, eye protection, ear protection, etc.). Seat belts shall be secured at all times. No passengers will be allowed on equipment while in operation. Brakes shall be applied when equipment is stopped. Safety guards will remain installed and properly used. Equipment will not be left unattended while engine is operating. Personnel will not approach any equipment until power take off (PTO) shaft has come to a complete stop. Exit or entrance to vehicles is prohibited while equipment is in motion. Mowers and tractors will be operated to keep a safe distance from electrical outlet boxes, conduit, water faucets, sign or gateposts, and other obstacles. Equipment will be operated in a safe manner and under control at all times. As much as possible, mow with discharge pointing away from people, vehicles RVs etc. Hazard warning light will be operated if available. |
| Actions: Prevent injuries from slipping by maintaining 3-point contact with grab handles and steps. Never jump from equipment. Keep stpes and decks free of mud, oil, and grease. |
| Actions: Required maintenance will be performed at a location, which will provide protection from traffic for maintenance personnel. Preventive maintenance procedures recommended by the manufacturer will be followed. |
| Actions: Operators will wear protective equipment at all times while using power trimming/edging equipment. Operators will follow manufacturer's instructions while performing maintenance such as blade sharpening, carburetor adjustments, and spark plug maintenance. |
| Actions: Prior to mowing, all slopes will be throughly inspected for washes, potholes or other surface irregularities that could cause a mower to overturn. Operators will be particularly watchful of soft areas that may be undercut. |
| Actions: Hazard warning lights on all mechanized equipment will be in operation while mowing, transporting, or when equipment is parked along the roadside. Slow moving vehicle (SMV) emblems will be installed on every tractor used alongside or transported on any roadway. Extrme caution will be observed to prevent accidents when driving equipment onto access roads from connecting roads or mowing areas. |
| Actions: Rocks that can be thrown by mowers and debris such as bottles, cans, tree limbs, and other foreign matter shall be picked up before mowing operations begin. |
| Actions: If lightning is present, all mowing operations will cease. Personnel will move to a clear area away from trees and equipment and will remain there until the danger passes or if the Foreman directs them to another location. |
| Actions: Always use proper lifting techniques. Use adequate manpower or mechanical assistance. |
| Select risk assessment code from drop down list based on matrix above: 3 |
| Select risk assessment code from drop down list based on matrix above: 3 |
| Select risk assessment code from drop down list based on matrix above: 3 |
| Select risk assessment code from drop down list based on matrix above: 3 |
| Select risk assessment code from drop down list based on matrix above: 3 |
| Select risk assessment code from drop down list based on matrix above: 3 |
| Select risk assessment code from drop down list based on matrix above: 3 |
| Select risk assessment code from drop down list based on matrix above: 3 |
| Select risk assessment code from drop down list based on matrix above: 3 |
| Select risk assessment code from drop down list based on matrix above: 3 |
| Select risk assessment code from drop down list based on matrix above: 3 |
| Select risk assessment code from drop down list based on matrix above: 3 |
| Equipment: Truck, Trailer |
| Equipment: Mower |
| Equipment: Trimmer/Edgers |
| Training: Defensive driving training, experience with trailer hookup |
| Training: Read manufactures manual |
| Training: Read Manufactures manual |
| Inspections: Make sure all hookups, cables, lights etc are working properly. |
| Inspections: Inspection all guards, lights, safety devices, etc. prior to operations. |
| Inspections: Inspection all guards, blades, etc. prior to operations. |
| TextField9: |
| SignatureField1: |
File details come from the government source that posted it. Updated .