W912BV-17-Q-0021_RS_Kerr_Jan.pdf

SEE ADDENDUM

(No Collect Calls)

W912BV-17-Q-0021 06-Feb-2017

b. TELEPHONE NUMBER 8. OFFER DUE DATE/LOCAL TIME

02:00 PM 08 Mar 2017

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912BV9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

DOUGLAS D BUFFINGTON

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

WOMEN-OWNED SMALL

BUSINESS (WOSB)

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

CONTRACTING DIV

USACE, TULSA 1645 S 101 E AVE

TULSA OK 74128-4609

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

ECONOMICALLY DISADVANTAGED

WOMEN-OWNED SMALL BUSINESS

(EDWOSB)

SIZE STANDARD:

$18,000,000.00

NAICS:

561720

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF87

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912BV-17-Q-0021

Section A - Solicitation/Contract Form

INSTRUCTIONS TO OFFERORS

Instructions to Offerors

Read the solicitation in its entirety and all amendments and complete the price schedule before submitting documents. Payments will be made after receipt of a proper invoice and receipt of acceptable supplies or services.

Regular office hours: Monday to Friday, 8:00 a.m. to 4:30 p.m. CST

MAIL, FAX, EMAIL or HAND DELIVER YOUR DOCUMENTS

Do not include excess information, to include audio‐visual materials, electronic media, CD’s, thumbdrives, etc. or pages of the solicitation that do not contain information provided by the perspective offeror. NO cross outs or strike through marks. Submit a legible quote with no correction marks.

EMAIL

Emailed quotes in a file format readable by Adobe or MicroSoft Office readable file formats are the only acceptable methods of submitting a quote electronically. All documents must be attached in one file. Reference the solicitation in the subject line. Send quotes to E‐mail address CESWT‐CT‐SS‐Quotes@usace.army.mil and copy

Douglas.D.Buffington@usace.army.mil. Ensure your quote is received before the due date and time. In order for your quote to be considered responsive, all required materials must be received before the due date and time. If all required materials are not received your quote will not be considered.

FAX or MAIL

Include a cover sheet that references the Contract Specialist – Douglas Buffington and the solicitation number.

When submitting through mail ensure you clearly mark the envelope to:

TULSA DISTRICT CORPS OF ENGINEERS

DOUGLAS BUFFINGTON, CECT‐SWT‐E

1645 S. 101ST EAST AVE

TULSA, OK 74128‐4609

FAX: (918) 669‐7495

Clearly mark the envelope in the lower left hand corner with the solicitation number. All pages should be numbered. Use only 8 ½ by 11 inch paper for fax or mail submissions. Do not use fold‐outs (e.g., 11” x 14” or 11” x

17” sheets). Do not use a font size smaller than 10, or condensed print for any submission. Time New Roman or

Arial Font are the only acceptable fonts. All page margins must be at least 1 inch wide, but may include headers and footers. Illegible handwritten quotes will not be considered. Typed quotes are highly encouraged and the preferred method. Do not use spring clamps, staples, or exceed the recommended capacity of the fastener or binder.

Do not use plastic multi‐hole/spiral binding systems, heat binding systems, or other systems which do not facilitate the ready insertion of additional pages or removal of pages. DO NOT use tabbed dividers, flagged tabs, or any divider that extends beyond the paper size to separate sections. The pages must be able to be removed from their binding without ripping or tearing. Ensure to allow enough time to submit your quote before the due date and time.

HAND DELIVER

If your submission will be hand‐carried, please provide notification to the Contract Specialist at least one working day in advance (918‐669‐7078) or Douglas.D.Buffington@usace.army.mil, as unescorted visitors are not allowed in the Contracting Division offices. Please consider in your arrival that visitors must go through security check points.

Offerors can only submit their documents to the Contract Specialist or a Contracting Officer of the Tulsa District

Office. The address of the Tulsa District Office is below:

TULSA DISTRICT CORPS OF ENGINEERS

1645 S. 101ST EAST AVE

TULSA, OK 74128‐4609

This procurement is being conducted in accordance with Simplified Acquisition Procedures (SAP) of FAR Parts 12 and 13. Any reference to offers or bids or offerors or bidders should be substituted with quotations or quoters. All reference to discussions shall not be interpreted under FAR Part 15, but rather indicate that the Government may communicate with offerors/quoters as allowed under simplified acquisition procedures.

Submit the following documents:

1) A signed copy of the 1st page of the solicitation and all amendments

2) Complete the past performance references page, if included in solicitation.

3) Complete the Excel pricing schedule provided in the solicitation (all cells except for the unit prices are locked).

4) Complete all FAR Clauses with applicable blanks filled in from SECTIONS I, K, L, and M

INQUIRIES – OFFEROR’S QUESTIONS AND COMMENTS

USE OF BIDDER’S INQUIRY

Prospective offerors shall submit questions and inquiries related to this solicitation in accordance with the following (no other means of questions or inquiries will be answered except through Bidder Inquiry):

a. For information related to amendments, and the dates set for receipt of proposals, please check http://www.fedbizopps.gov

b. Contractual and Technical inquiries and questions relating to proposal procedures are to be submitted via

Bidder Inquiry in ProjNet at https://www.projnet.org/projnet.

1. To submit and review bid inquiry items, offerors will need to be a current registered user or self‐register into the system. To self‐register go to the aforementioned web page and click on the BID tab. Select Bidder Inquiry, select agency USACE, and enter the Bidder Inquiry Key for this solicitation listed below, your e‐mail address, and then click login. Fill in all required information and click create user. Verify that information on next screen is correct and click continues.

2. From this page you may view all bidder inquiries or add an inquiry.

3. Bidders will receive an acknowledgement of their question via e‐mail, followed by an answer to their question after it has been processed.

4. The Solicitation Numbers are: W912BV‐17‐Q‐0021

The Bidder Inquiry Key is: K4EDDZ-GN39P5

5. Address/enter only one question/issue per entry.

c. The Bidder Inquiry System will be unavailable for new inquiries 2:00pm (Central) Monday, 27 February 2017 in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary.

d. Offerors are requested to review the specification in its entirety, and review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry.

e. The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800‐428‐HELP.

f. Offers will NOT be publicly opened. Information concerning the status of the evaluation and/or award will NOT be available after receipt of proposals.

g. The point of contact for this solicitation is:

Contract Specialist: Douglas Buffington

Telephone: 918‐669‐7078

E‐MAIL: Douglas.D.Buffington@usace.army.mil

PREPROPOSAL/SITE VISIT CONFERENCE

A Preproposal Conference/Site Visit is scheduled for 9:00 AM local time on Wednesday, 15 February 2017 at the

Robert S. Kerr Powerhouse, US Army Corps of Engineers, 29759 Powerhouse Rd, Sallisaw, OK 74955.

ANTITERRORISM AND OPERATIONS SECURITY REQUIREMENTS

The Government will provide the successful offeror with the required Army iWatch Antiterrorism Briefing documentation within two (2) business days of Contract Award.

Section B - Supplies or Services and Prices

PRICE SCHEDULE

JANITORIAL SERVICES FOR Kerr Power House

Contractor Name:

BASE PERIOD: 1 March 2017 THROUGH 28 FEBRUARY 2018 $ ‐

CLIN Item QTY Unit Unit Price Amount

0001 JANITORIAL SERVICES FOR Kerr Power House 12 Month $ ‐ $ ‐

0002 Refuse removal 52 Weekly $ ‐ $ ‐

TOTAL $ ‐

OPTION 1: 1 March 2017 THROUGH 28 FEBRUARY 2019

1001 JANITORIAL SERVICES FOR Kerr Power House 12 Month $ ‐ $ ‐

1002 Refuse removal 52 Weekly $ ‐ $ ‐

OPTION 2: 1 March 2017 THROUGH 29 FEBRUARY 2020

2001 JANITORIAL SERVICES FOR Kerr Power House 12 Month $ ‐ $ ‐

2002 Refuse removal 52 Weekly $ ‐ $ ‐

OPTION 3: 1 March 2017 THROUGH 28 FEBRUARY 2021

3001 JANITORIAL SERVICES FOR Kerr Power House 12 Month $ ‐ $ ‐

3002 Refuse removal 52 Weekly $ ‐ $ ‐

OPTION 4: 1 March 2017 THROUGH 28 FEBRUARY 2022

4001 JANITORIAL SERVICES FOR Kerr Power House 12 Month $ ‐ $ ‐

4002 Refuse removal 52 Weekly $ ‐ $ ‐

Section C - Descriptions and Specifications

STATEMENT OF WORK

S P E C I F I C A T I O N S

JANITORIAL WORK

ROBERT S. KERR POWERHOUSE

OKLAHOMA

ORGANIZATION OF SPECIFICATIONS

This specification consists of a general section supplemented by exhibits and appendices. A Table of Contents is provided on the following pages.

The general section contains requirements that apply to all work to be performed under the provisions of this specification. The exhibits contain detailed listings or examples referred to in the general section and the Performance Requirements. The appendices contain a description of the facilities to be serviced and the work to be performed.

Any reference to paragraphs or subparagraphs in this specification will refer to those in the general section unless otherwise noted.

TABLE OF CONTENTS

Para.

No. Paragraph Title 1 Scope of Work 2 Definitions 3 References 4 Initiation, Execution, & Acceptance of Work 5 Personnel 6 Equipment 7 Materials and Supplies 8 Performance Requirements 9 Deductions for Deficient Work 10 Safety 11 Contractor's Facilities 12 Work Schedules 13 Reporting Defective Facilities 14 Building Security 15 Prework Conference 16 Contractor Submittals 17 Billing 18 Contractor Quality Control 19 Antiterrorism and Operations Security Requirements

EXHIBITS

No. TITLE 1 Quality Assurance Report 2 Specifications for Contractor‐FurnishedMaterials and Supplies 3 Performance Requirements Table 4 Invoice Format 5 Quality Control Inspection Log

APPENDICES

Appendix Title A Janitorial Work ‐ Powerhouse

1. SCOPE OF WORK. The work required under this specification provides for the janitorial work at the powerhouse and contiguous exterior areas.

2. DEFINITIONS.

2.1. Bimonthly. Work required to be performed every other month.

2.2. Biweekly. Work required to be performed every other week.

2.3. Contractor Quality Control (CQC). The contractor's system of controlling the quality of services provided under the provisions of the contract.

2.4. Deficient Service. Any service provided by the contractor that does not meet the Performance Standards specified in the Performance Requirements given in Exhibit 3.

2.5. Government. The term "Government" as used herein means the United States of America.

2.6. Performance Requirement (PR). The Government's requirement for each service provided under the contract. Performance Standard (PStd) specifies the minimum standard (quality) for each service provided under the contract.

2.7. Project. The term "project" as used herein means all Government property and easements at Robert S. Kerr Lake.

2.8. Public Use Area (PUA). Parks as well as overlooks, nature and hiking trails, access points, and other areas used by the public for recreation.

2.9. Quality. Conformance with the contract specification.

2.10. Quality Assurance (QA). The procedure by which the Government determines CQC is functioning effectively.

2.11. Regulations. The term "regulations" refers to any local, state, or Federal law or regulation applicable to operation or maintenance of the project.

2.12. Semimonthly. Work required to be performed two times per month.

2.13. Semiweekly. Work required to be performed two times per week.

2.14. Workday. Any day, Monday through Thursday, exclusive of Federal holidays. This definition should not be interpreted to mean work is not required by this specification on other days.

3. REFERENCES. Corps of Engineers Safety and Health Requirements Manual (EM 385‐1‐1, current issue) is hereby incorporated into this specification. EM385‐1‐1 is available on‐line at:

http://www.usace.army.mil/SafetyandOccupationalHealth/SafetyandHealthRequirementsManual.aspx .

4. INITIATION, EXECUTION, AND ACCEPTANCE OF WORK.

4.1. Initiation and execution of janitorial work shall be in accordance with this specification.

4.2. Acceptance of janitorial work. The Government shall accept work unless the Contracting Officer or the Contracting Officer’s Representative (COR) notifies the contractor of deficient services.

4.2.1. Initial notification of deficiencies may be written or oral; however, all oral notification shall be confirmed by the Contracting Officer or the COR in writing within two (2) workdays. Written notification shall be provided by completing Parts I, II, and III of a Quality Assurance Report (SWT Form 982, Exhibit 1).

4.2.2. If the Contracting Officer or the COR notifies the contractor of deficient work, the contractor shall initiate action to accomplish corrective work. Work performed on a daily schedule shall be reperformed the same day. Work performed on less than a daily schedule shall be reperformed not later than the following day. Refer to paragraph 9 for deficient work not reperformed.

4.2.3. The contractor shall notify the Contracting Officer and the COR when deficiencies have been corrected by completing Part IV of the QA Report, provided it has been furnished the contractor. If not, notification shall be made orally. When work has been corrected, the Contracting Officer or the COR shall complete Part V of the QA Report and furnish the contractor a copy. A copy will also be provided the Contracting Officer at the Tulsa District Office for inclusion in the electronic files.

5. PERSONNEL. The contractor shall provide personnel necessary to accomplish all work required by this specification within specified time limits.

5.1. Experience and Skills. The contractor shall provide personnel that are experienced and demonstrate proficiency in the skills required performing the various types of work specified.

5.2. Supervision.

5.2.1. The contractor shall provide one supervisor on the project who shall have full authority to direct any work required. This supervisor and alternates, who shall have full authority to execute work during his absence, shall be designated in writing to the Contracting Officer and the COR.

5.2.2. The contractor shall provide the Contracting Officer and the COR a local or toll‐free telephone number at or through which the supervisor can be reached between 8:00 a.m. and 4:30 p.m. on all days work is being performed. Use of a cellular‐type phone is acceptable.

6. EQUIPMENT. The contractor shall furnish equipment necessary to accomplish all work required by this specification within specified time limits. Upon request, the contractor shall present equipment to the Contracting Officer for inspection.

6.1. All motorized equipment shall be powered by 115 Volts AC.

6.2. All equipment must be in good operating and mechanical condition and shall comply with EM 385‐ 1‐1.

6.3. Upon request from the Contracting Officer or the COR, the contractor shall present equipment to the Contracting Officer or the COR for inspection. Equipment brought to the project shall not be used until it has passed inspection. The Contracting Officer or the COR shall establish the time and location for these inspections.

6.4 While performing work under this contract, vehicles shall be operated only by legally licensed drivers and parked only on roads, parking areas, or pullouts unless the Contracting Officer or the Site/Lake Manager approves use of other areas.

7. MATERIALS AND SUPPLIES.

7.1. Contractor Furnished. Except for the items listed in subparagraph 7.2., the contractor shall furnish all materials and supplies necessary to accomplish all work required by this specification within specified time limits.

7.1.1. All materials and supplies shall be new and adequate quantities shall be maintained to perform the required services without interruptions. All materials and supplies are subject to review by the Contracting Officer to determine compliance with this specification.

7.1.2. Specifications for selected contractor‐furnished materials and supplies are given in Exhibit

2. In addition to materials and supplies listed in Exhibit 2, the contractor shall furnish the following:

Carpet Shampoo Cleaning compounds Deodorant Cakes Disinfectants Glass Cleaner Mops, brooms, etc.

Paper Towels Soap Toilet Tissue Ultra High Speed Finish Plastic liners for trash receptacles Spot Remover for carpets & upholstered chairs Wax and stripping agents for tile floors

7.2. Government Furnished. The Government will furnish potable water.

8. PERFORMANCE REQUIREMENTS. PRs for work performed under this specification are given in Exhibit

3. The contractor's performance will be evaluated using these PRs as follows:

8.1. Services provided by the contractor will be inspected for compliance with PStds. Those not meeting PStds shall be considered deficient. Major or recurring minor deficiencies will result in a letter of correction being issued by the Contracting Officer's Representative.

8.2. Deficient services are determined during initial QA inspections since the purpose of QA is to determine how well CQC is functioning. The results of inspections are not changed as a result of satisfactory reperformance.

9. DEDUCTIONS FOR DEFICIENT WORK. Deductions from the contractor's scheduled earnings shall be made for services that do not meet the PStds in Exhibit 3. Deductions for documented defects will be made in accordance with the following procedures:

9.1. Each service found deficient and reperformed by the contractor: No deduction.

9.2. Each service found deficient and performed by the Government: Deduction for loss in value shall be based on the Government's cost for performing the work.

9.3. Each service found deficient and performed by another contractor: Deduction is the contract price paid the other contractor to perform the work.

9.4. Each service found deficient and not reperformed by anyone, or work not performed at all:

Deduction for loss in value shall be based on estimates of the contractor's cost for performing the work, i.e., labor, materials, equipment costs, work schedules, etc. Loss in value shall be based on the contract bid price or applicable portion thereof.

10. SAFETY.

10.1. Safety Plan. The contractor shall furnish the Contracting Officer and the COR with a safety plan to implement the general policies and procedures for safe operation and maintenance of the project in accordance with EM 385‐1‐1. The safety plan shall include, but not be limited to the following:

10.1.1. Procedures for training employees in responsibilities for safety of others, including the general public.

10.1.2. Requirements for wearing or utilizing personal safety equipment and apparel.

10.1.3. Procedures for handling, reporting, and correcting unsafe conditions, practices, and safety violations.

10.1.4. Procedures for treating and transporting injured persons to medical facilities.

10.2. Safety Violations. If a contractor's employee persists in not following the safety requirements of this specification or the contractor's safety plan, the employee shall be permanently discharged upon the request of the Contracting Officer.

10.3. Personal Clothing and Safety Apparel. Contractor personnel shall wear clothing suitable for the weather and working conditions. The minimum shall be short‐sleeve shirt and long trousers (no sleeveless shirts or tank tops, or shorts). Clothing shall be in good repair. Personnel will wear additional protective apparel when required by Section 5, EM 385‐1‐1.

10.4. Accident Reports.

10.4.1. The contractor shall immediately notify the Contracting Officer and the COR of all known accidents that occur at the project and result in death or serious injury.

10.4.2. The contractor shall investigate all accidents involving contractor or subcontractor employees that result in death, traumatic injury, occupational disease, or damage to property, materials, supplies and equipment incidental to work performed under this specification. The results of investigations shall be reported to the Contracting Officer and the COR immediately, and in writing on ENG Form 3394, Accident Investigation Report, within one (1) workday following the accident.

10.5. Exposure Reports. The contractor shall maintain an accurate record of exposure data (man‐hours worked) and submit the figure in writing monthly by the 2nd workday of the following month.

11. CONTRACTOR'S FACILITIES. The contractor shall be responsible for storage of materials, supplies and equipment to maintain the services required by this contract.

12. WORK SCHEDULES. At the beginning of each quarter, the contractor shall furnish the COR a schedule for performing all janitorial work that is required at a weekly frequency or less. A revised schedule shall be furnished the COR prior to the contractor changing his mode of operation.

13. REPORTING DEFECTIVE FACILITIES. While performing work, contractor personnel shall observe the condition of Government facilities. Damaged, defective, and/or inoperative facilities shall be reported to the COR or Site Manager each workday.

14. BUILDING SECURITY. The names of contractor personnel authorized to perform work under this contract shall be furnished the Contracting Officer and the COR. Only those persons whose name appears on this list shall be allowed access to buildings. When Government personnel are not present while work is being performed, contractor personnel shall keep buildings locked and refuse entrance to anyone who does not have a key to the buildings. Contractor personnel will be instructed by the COR in the operation of intruder alarm systems and will be responsible for correct operation of these devices when work is performed and Government personnel are not present.

15. PREWORK CONFERENCE. The Contracting Officer or their designated representative shall conduct a Prework Conference with the contractor to discuss the provisions of this specification and the contractor's submittals listed in paragraph 16 below. As a minimum, the officer of the company that signed the contract and the on‐site supervisor shall represent the contractor. The Contracting Officer or their designated representative shall establish the location, date, and time of the Prework Conference after consultation with the contractor.

16. CONTRACTOR SUBMITTALS. Unless otherwise noted, the contractor shall submit the documents listed below to the Contracting Officer and/or the COR prior to starting work. All submittals, other than copies of contracts, shall be typed and the original and one copy shall be furnished the Contracting Officer. If the Contracting Officer determines any of the submittals do not comply with this specification, the contractor shall resubmit these documents within one (1) week.

16.1. Names of supervisor and alternate (submit prior to initiation of work and prior to changing designated employees) (subparagraph 5.2.1.).

16.2. Safety Plan (submit prior to initiation of work) (subparagraph 10.1.).

16.3. Exposure reports (submit by 2nd workday of each month) (subparagraph 10.5.).

16.4. Work schedules (submit prior to initiation of work and prior to changing schedules) (paragraph 12).

16.5. Personnel authorized to perform work under this contract (paragraph 14).

16.6. Insurance Certification submitted prior to initiating work (paragraph 19)

16.7. AT/OPSEC Training form provided prior to initiation of work and prior to any employee entering the facility (paragraph 20)

16.8. Background check initiated with the Tulsa District Security Officer prior to initiation of work and prior to any employee entering the facility (subparagraph 20.2.)

17. BILLING.

17.1. The contractor shall submit the original and two copies of invoices at the end of each month for all completed work.

17.2. Invoices shall be prepared in the format shown at

Exhibit 4.

17.3. All exposure reports shall be submitted before an invoice will be accepted.

17.4. Invoices and supporting documents shall be delivered or mailed to Robert S. Kerr Powerhouse, Rt.

2, Box 686, Keota, OK 74941‐8815.

18. CONTRACTOR QUALITY CONTROL. The contractor shall establish and execute a CQC Program in accordance with clause 52.246‐1 "Inspection of Services" to assure that all work required by this specification is completed on schedule and in accordance with the PRs in Exhibit 3.

18.1. Results of quality control inspections conducted by the contractor shall be entered on the Quality Control Inspection Log (SWT Form 990, Exhibit 5). Furnish a copy of completed inspection logs to the Contract Officer’s Representative weekly.

18.2. Requirements in 18.1. may be waived by the COR if it is determined proper CQC can be achieved without the required submissions. This determination will normally be made on the basis of actual performance by the contractor and shall be made in writing by the COR. If submissions are again required after being waived this reinstatement shall not be considered as grounds for a price increase.

19. Antiterrorism And Operations Security Requirements: The Contractor shall be responsible for ensuring all personnel, to include sub‐contractor personnel, comply with the training requirements and procedures identified on the document titled “Antiterrorism/Operations Security Requirements” in Section H, Special Contract Requirements. When items for which training is identified, the Contractor shall ensure that all personnel complete acknowledgement for the specified training; the Contractor is responsible for ensuring all training acknowledgments, when applicable, are submitted to the COR or Contracting Officer within 10 calendar days of contract award (or NTP for construction contracts). In no event shall any contractor or sub‐contractor personnel be onsite prior to completion of any applicable training, submission of training verification, and initiation of background check.

19.1. Training materials and verification forms will be provided within two business days of Contract Award.

19.2. Per the ANTITERRORISM/OPERATIONS SECURITY REQUIREMENTS, Jun 2015, incorporated in SECTION H, Item 2b:

19.2.1. For contractors who do not require CAC, but require access to a DoD facility or installation. Proposed language: Contractor and all associated sub‐contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC‐III) and Terrorist Screening Database (TSDB) (Army Directive 2014‐05 / AR 190‐13), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative, as NCIC and TSDB are available), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

19.2.2. Contractor personnel who are intended to access Government Facilities unescorted MUST provide the following to the Tulsa District Security Officer prior to attempting to access Government Facilities:

1. PSIP Form completed (Form will be provided upon request)

2. OF 0306 completed

3. Two copies of FD 258 (finger print cards) completed

4. Copy of birth certificate, passport, or Certificate of Naturalization

5. Copy of State issued drivers license or state ID

6. Resume' covering seven years

7. Employees will need to complete the SF 86 and retain this copy. Employees should retain copies of all the above forms.

19.2.3. Once the above forms are turned over the background check will be initiated. The Employees will receive notification/email from the Office of Personnel Management providing them information to fill out an SF 85 on‐line.

EXHIBIT 1

QUALITY ASSURANCE REPORT

The Quality Assurance Report SWT Form 982 is provided at SECTION J as Attachment 1.

EXHIBIT 2

SPECIFICATIONS FOR CONTRACTOR‐FURNISHED

MATERIALS AND SUPPLIES

ITEM APPENDIX SPECIFICATION

HAND SOAP A LIQUID, HIGH LATHERING & SUDSING

CHARACTERISTICS, MILDLY PERFUMED

(WOMEN).

HAND SOAP A BAR, LAVA OR EQUIVALENT (MENS).

REFUSE CONTAINER

LINER

A PLASTIC, 8 TO 32 GALLON.

TISSUE PAPER A 2-PLY BATH TISSUE, NON-BLEACHED,

NATURAL, SEPTIC TANK SAFE,

MINIMUM OF 500 SHEETS PER ROLL,

100% POST CONSUMER WASTE

RECYCLED MATERIALS, #100, FORT

HOWARD CO. OR EQUAL.

TOWELS A SINGLE PLY, SINGLE-FOLD, white, 40% POST CONSUMER WASTE RECYCLED

MATERIALS TO MEET EPA GUIDELINES

AS SPECIFIED IN THE FEDERAL

REGISTER #150, FORT HOWARD OR

EQUAL.

HOUSEHOLD ROLLED

PAPER TOWELS

A SINGLE PLY, RECYCLED CONTENT AS

PER REQUIREMENTS IN SECTION I

URINAL DEODORANT

CAKE

A PERFUMED, COMMERCIAL QUALITY,

SEPTIC TANK SAFE.

EXHIBIT 3

PERFORMANCE REQUIREMENTS

SERVICE REQUIREMENTS PR NO. PERFORMANCE STANDARD

APPENDIX A

Dust furniture, etc. 1 All surfaces free of dust, litter, lint, and soil.

Clean floors 2 Clean. No litter, mop strands, streaks, swirl marks, or detergent residue left on floors. No standing water on floors. No splash marks on furniture, walls, baseboards, etc.

Finishing floors 3 Entire floor has a uniform, glossy appearance. No scuffmarks or visible wax buildup. Baseboards, furniture, etc., shall be free of cleaning and waxing solutions.

Vacuum carpets 4 Clean. Free of soil, litter, & debris visible a distance of 10 ft.

Clean carpets 5 Clean. Free of soil spots unless special cleaning agents prove unsuccessful. No evidence of fuzzing caused by harsh rubbing or brushing. Cleaned soil spot areas blend with adjacent areas of carpeting.

Clean light fixtures 6 Clean. Free of insects, insect nests, dirt, grease, and other foreign matter, Clean mirrors & glass (other than windows)

7 Clean. Free of dirt, smudges, streaks, and other foreign matter.

Clean restrooms 8 Clean and odor-free. All fixtures, walls, & floors clean. Lavatories, urinals, commodes, & floors sanitary. Soap, towels, & toilet tissue adequate until next cleaning day.

Clean drinking fountains

9 Clean, sanitary.

Grounds keeping 10 Grounds, parking areas, & sidewalks free of refuse & debris.

SERVICE REQUIREMENTS PR NO. PERFORMANCE STANDARD

Refuse collection 11 Containers empty. Liners clean and not torn.

Refuse disposal 12 Refuse deposited in barrels. No refuse left outside barrels or in parking areas.

EXHIBIT 4

INVOICE FORMAT

BILLING FOR

MAINTENANCE CONTRACT

PROJECT: ____________________________________ SHEET ____ OF ____

CONTRACTOR: _________________________________ DATE: __________

ADDRESS: ____________________________________ CONTRACT NO: W912BV-____-__-_____

BILLING PERIOD: ____________ THRU ___________ INVOICE NO: ____________

PAYMENT TERMS: ______________________________

(Payment Discount or N/A)

BID ITEM NO. AMOUNT

PAYMENT REQUESTED: __________________

CONTRACTOR (Signature/Date)

EXHIBIT 5

QUALITY Control Inspection Log

The Quality Control Inspection Log SWT Form 990 is provided at SECTION J as Attachment 2.

APPENDIX A

JANITORIAL WORK ‐ POWERHOUSE

1. FACILITIES TO BE SERVICED. The facilities to be serviced under the provisions of this appendix consist of the powerhouse and contiguous exterior areas. An inventory of these areas is given in Table A.

2. FREQUENCIES AND TIMES OF SERVICES. Services required on each workday shall be performed on Monday through Thursday, excluding Federal holidays. All work shall be accomplished between 7:00 a.m. and 3:30 p.m. Services required on a weekly, monthly, quarterly, or semiannual basis shall be performed on any of the workdays specified above.

3. DESCRIPTION OF WORK.

3.1. Offices, Lobby, Elevator, Control Room, Electronic Equipment Room, Break/Conference room, Kitchens, First Aid Room, Hallways, and Stairways (Excluding Restrooms).

3.1.1. Each cleaning day. Empty trash receptacles (clean cans if necessary). Clean sinks and counter tops; clean all microwaves ; clean and disinfect drinking fountain; and clean tile floors including elevator. Damp mop wood laminate floors. Dust desktops. Control switchboards, electronic equipment, computers, typewriters, radio, videocassette recorder and copy machine shall not be cleaned.

3.1.2. Weekly. Vacuum carpeted floors. Spot remover shall be used to remove new spills from carpeted floors. Clean exterior surfaces of refrigerators, stoves, and cabinets. The glass on entry doors and other glass enclosures shall be cleaned. Clean windowsills, cabinets, pictures, handrails, and office furnishings. Vinyl tile floors shall be high speed buffed.

3.1.3. Monthly. Clean chairs, including removal of spots from upholstered chairs. Clean walls, doors, ceilings, and HVAC vent covers. Stains or marks that cannot be removed without damaging wall surfaces or paint are exempt from this cleaning.

3.1.4. Semiannually. Finish vinyl tile floors to include the elevator. Tile floors shall be stripped prior to every time they are finished. Steam clean carpeted floors, spot remover shall be used to remove stains. This work shall be accomplished in May and November and shall be completed from start to finish in a two‐week time frame.

3.2. Restrooms/Showers, Locker Rooms, and Janitorial Closets.

3.2.1. Each cleaning day. Wet mop floors. Clean mirrors and plumbing fixtures. A disinfectant shall be used to eliminate odor and minimize health hazards. Deodorant shall be maintained in restrooms. Deodorant cakes shall be maintained in urinals. Trash receptacles shall be emptied. Soap, paper towels, and toilet tissue dispensers shall be checked and filled if necessary.

3.2.2. Weekly. Clean walls, partitions, and shower stalls. A disinfectant shall be used to eliminate odor and minimize health hazards.

3.2.3. Quarterly. Clean ceilings, vent covers, and light fixtures.

3.3. Erection Bay, Generator Bay, Generator Tops, Shop Areas, Switchgear Rooms, Cable Spread Room, Water Treatment Room, Gate Repair Room, Air Compressor Room, Oil Storage Rooms, Bottom Gallery, adjacent Hallways, and Stairways.

3.3.1. Each cleaning day. Empty trash receptacles. Sweep or dust mop shop areas.

3.3.2. Weekly. Wet mop shop areas. Grease and oil stains will be removed from the floors.

Dust mop all quarry‐tile floors (wet mopping shall be accomplished if necessary to remove dirt). Clean all handrails. Dust mop the tops of all generators; no water allowed. Dust mop Water Treatment Room.

Dust mop Gate Repair Room and dust off equipment.

3.3.3. Monthly. Wet mop all floors; Wet mop the tops of all generators; no mop buckets allowed on generator top; grease and oil stains will be removed as required.

3.3.4. Semiannually. Clean light fixtures and vent covers. Remove insect nests/webs. Wax all quarry‐tile floors including stairways, Buff all quarry‐tile floors opposite times of waxing.

3.4. Exterior Surfaced Areas, Intake Deck, Draft Tube Deck, Entrance Area, and Lawn Area.

3.4.1. Each cleaning day. Pick up litter, trash, and debris. Concrete entrance pad shall be swept clean.

3.4.2. Weekly. Concrete entrance pad and bench shall be scrubbed and hosed off, Cobwebs and wasp nest shall be removed from windows.

3.4.3. Monthly. Power wash front entrance windows and clean

3.4.4. Semiannually. Sweep intake and draft tube decks.

3.5. Refuse Disposal. Refuse collected form the powerhouse shall be deposited in Government furnished barrels each cleaning day. The barrels shall be emptied weekly, liners shall be replace if dirty or torn. Refuse shall be disposed off Government land in accordance with applicable local, state, and Federal laws and regulations.

4. PERFORMANCE REQUIREMENTS. The work performed under this appendix shall comply with the PRs in Exhibit 3. The terms clean, sanitary, and odor‐free facilities are used in Exhibit 3 and are defined as follows.

4.1. Clean. The contractor shall vacuum, sweep, wash, wipe, or brush facilities to ensure that dirt, dust, rocks, debris, trash, garbage, fecal matter, urine, soap scum, biological formations and resultant stains, insects, insect nests and webs, and residue from cleaning agents are removed.

4.2. Sanitary. The contractor shall disinfect facilities each time they are cleaned.

4.3. Odor‐free. The contractor shall use a chemical agent in a manner that will eliminate odor from facilities.

TABLE A

INVENTORY OF FACILITIES

AREA SIZE

Interior Heated Areas w/Carpeted Floors 750 SF Interior Heated Areas w/Vinyl Tile Floors 6,135 SF Interior Heated Areas w/Wood Laminate Floors 1,440 SF Interior Areas w/Quarry‐Tile Floors 24,504 SF Interior Work & Storage Areas w/Concrete Floors 34,949 SF Area of Concrete Entrance Pad 200 SF

Section E - Inspection and Acceptance

CLAUSES INCORPORATED BY REFERENCE

52.246-1 Contractor Inspection Requirements APR 1984

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

52.242-15 Stop-Work Order AUG 1989

Section G - Contract Administration Data

252.201-7000 Contracting Officer's Representative DEC 1991 252.204-7006 Billing Instructions OCT 2005 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

Section H - Special Contract Requirements

WAGE RATES

WD 15‐5143 (Rev.‐2) was first posted on www.wdol.gov on 01/03/2017

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015‐5143 Daniel W. Simms Division of | Revision No.: 2 Director Wage Determinations| Date Of Revision: 12/30/2016 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.20 for calendar year 2017 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.20 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2017. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Oklahoma

Area: Oklahoma Counties of Le Flore, Sequoyah **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE ‐ TITLE FOOTNOTE RATE

01000 ‐ Administrative Support And Clerical Occupations 01011 ‐ Accounting Clerk I 12.60 01012 ‐ Accounting Clerk II 15.33 01013 ‐ Accounting Clerk III 17.78 01020 ‐ Administrative Assistant 20.20 01035 ‐ Court Reporter 21.63 01041 ‐ Customer Service Representative I 10.67 01042 ‐ Customer Service Representative II 12.00 01043 ‐ Customer Service Representative III 13.09 01051 ‐ Data Entry Operator I 11.97 01052 ‐ Data Entry Operator II 13.05 01060 ‐ Dispatcher, Motor Vehicle 17.99 01070 ‐ Document Preparation Clerk 12.66 01090 ‐ Duplicating Machine Operator 12.66 01111 ‐ General Clerk I 11.08 01112 ‐ General Clerk II 12.83 01113 ‐ General Clerk III 16.83 01120 ‐ Housing Referral Assistant 16.39 01141 ‐ Messenger Courier 11.72 01191 ‐ Order Clerk I 13.01 01192 ‐ Order Clerk II 14.65 01261 ‐ Personnel Assistant (Employment) I 13.46 01262 ‐ Personnel Assistant (Employment) II 15.06 01263 ‐ Personnel Assistant (Employment) III 17.57 01270 ‐ Production Control Clerk 20.31 01290 ‐ Rental Clerk 13.33 01300 ‐ Scheduler, Maintenance 13.14 01311 ‐ Secretary I 13.14 01312 ‐ Secretary II 14.71 01313 ‐ Secretary III 16.39 01320 ‐ Service Order Dispatcher 14.95 01410 ‐ Supply Technician 20.20 01420 ‐ Survey Worker 13.71

01460 ‐ Switchboard Operator/Receptionist 11.48 01531 ‐ Travel Clerk I 12.32 01532 ‐ Travel Clerk II 13.14 01533 ‐ Travel Clerk III 13.77 01611 ‐ Word Processor I 11.77 01612 ‐ Word Processor II 13.35 01613 ‐ Word Processor III 14.97 05000 ‐ Automotive Service Occupations 05005 ‐ Automobile Body Repairer, Fiberglass 19.15 05010 ‐ Automotive Electrician 18.19 05040 ‐ Automotive Glass Installer 17.24 05070 ‐ Automotive Worker 17.24 05110 ‐ Mobile Equipment Servicer 15.14 05130 ‐ Motor Equipment Metal Mechanic 19.15 05160 ‐ Motor Equipment Metal Worker 17.24 05190 ‐ Motor Vehicle Mechanic 17.91 05220 ‐ Motor Vehicle Mechanic Helper 13.98 05250 ‐ Motor Vehicle Upholstery Worker 16.08 05280 ‐ Motor Vehicle Wrecker 17.19 05310 ‐ Painter, Automotive 18.22 05340 ‐ Radiator Repair Specialist 17.24 05370 ‐ Tire Repairer 13.29 05400 ‐ Transmission Repair Specialist 19.15 07000 ‐ Food Preparation And Service Occupations 07010 ‐ Baker 11.11 07041 ‐ Cook I 9.79 07042 ‐ Cook II 11.11 07070 ‐ Dishwasher 8.86 07130 ‐ Food Service Worker 8.60 07210 ‐ Meat Cutter 12.17 07260 ‐ Waiter/Waitress 8.61 09000 ‐ Furniture Maintenance And Repair Occupations 09010 ‐ Electrostatic Spray Painter 17.42 09040 ‐ Furniture Handler 11.67 09080 ‐ Furniture Refinisher 17.42 09090 ‐ Furniture Refinisher Helper 13.06 09110 ‐ Furniture Repairer, Minor 15.18 09130 ‐ Upholsterer 16.54 11000 ‐ General Services And Support Occupations 11030 ‐ Cleaner, Vehicles 11.50 11060 ‐ Elevator Operator 9.85 11090 ‐ Gardener 13.83 11122 ‐ Housekeeping Aide 9.85 11150 ‐ Janitor 9.85 11210 ‐ Laborer, Grounds Maintenance 11.13 11240 ‐ Maid or Houseman 8.73 11260 ‐ Pruner 10.07 11270 ‐ Tractor Operator 13.47 11330 ‐ Trail Maintenance Worker 11.13 11360 ‐ Window Cleaner 11.01 12000 ‐ Health Occupations 12010 ‐ Ambulance Driver 13.51 12011 ‐ Breath Alcohol Technician 15.83 12012 ‐ Certified Occupational Therapist Assistant 21.36 12015 ‐ Certified Physical Therapist Assistant 23.89 12020 ‐ Dental Assistant 14.72 12025 ‐ Dental Hygienist 31.40 12030 ‐ EKG Technician 18.82 12035 ‐ Electroneurodiagnostic Technologist 18.82 12040 ‐ Emergency Medical Technician 13.51 12071 ‐ Licensed Practical Nurse I 15.10 12072 ‐ Licensed Practical Nurse II 16.90 12073 ‐ Licensed Practical Nurse III 18.83 12100 ‐ Medical Assistant 13.05 12130 ‐ Medical Laboratory Technician 15.57 12160 ‐ Medical Record Clerk 12.54 12190 ‐ Medical Record Technician 14.03 12195 ‐ Medical Transcriptionist 14.83

12210 ‐ Nuclear Medicine Technologist 32.41 12221 ‐ Nursing Assistant I 10.26 12222 ‐ Nursing Assistant II 11.53 12223 ‐ Nursing Assistant III 12.59 12224 ‐ Nursing Assistant IV 14.12 12235 ‐ Optical Dispenser 14.54 12236 ‐ Optical Technician 14.86 12250 ‐ Pharmacy Technician 13.40 12280 ‐ Phlebotomist 13.60 12305 ‐ Radiologic Technologist 21.91 12311 ‐ Registered Nurse I 20.50 12312 ‐ Registered Nurse II 25.07 12313 ‐ Registered Nurse II, Specialist 25.07 12314 ‐ Registered Nurse III 30.34 12315 ‐ Registered Nurse III, Anesthetist 30.34 12316 ‐ Registered Nurse IV 36.37 12317 ‐ Scheduler (Drug and Alcohol Testing) 19.62 12320 ‐ Substance Abuse Treatment Counselor 14.16 13000 ‐ Information And Arts Occupations 13011 ‐ Exhibits Specialist I 18.95 13012 ‐ Exhibits Specialist II 22.25 13013 ‐ Exhibits Specialist III 27.23 13041 ‐ Illustrator I 18.95 13042 ‐ Illustrator II 22.25 13043 ‐ Illustrator III 27.23 13047 ‐ Librarian 22.75 13050 ‐ Library Aide/Clerk 9.02 13054 ‐ Library Information Technology Systems 21.03 Administrator 13058 ‐ Library Technician 15.08 13061 ‐ Media Specialist I 14.85 13062 ‐ Media Specialist II 16.62 13063 ‐ Media Specialist III 18.52 13071 ‐ Photographer I 15.06 13072 ‐ Photographer II 17.50 13073 ‐ Photographer III 20.54 13074 ‐ Photographer IV 25.14 13075 ‐ Photographer V 30.42 13090 ‐ Technical Order Library Clerk 17.76 13110 ‐ Video Teleconference Technician 15.87 14000 ‐ Information Technology Occupations 14041 ‐ Computer Operator I 14.71 14042 ‐ Computer Operator II 16.45 14043 ‐ Computer Operator III 21.59 14044 ‐ Computer Operator IV 25.11 14045 ‐ Computer Operator V 27.62 14071 ‐ Computer Programmer I (see 1) 22.27 14072 ‐ Computer Programmer II (see 1) 14073 ‐ Computer Programmer III (see 1) 14074 ‐ Computer Programmer IV (see 1) 14101 ‐ Computer Systems Analyst I (see 1) 14102 ‐ Computer Systems Analyst II (see 1) 14103 ‐ Computer Systems Analyst III (see 1) 14150 ‐ Peripheral Equipment Operator 14.71 14160 ‐ Personal Computer Support Technician 28.80 14170 ‐ System Support Specialist 24.07 15000 ‐ Instructional Occupations 15010 ‐ Aircrew Training Devices Instructor (Non‐Rated) 28.14 15020 ‐ Aircrew Training Devices Instructor (Rated) 34.04 15030 ‐ Air Crew Training Devices Instructor (Pilot) 40.79 15050 ‐ Computer Based Training Specialist / Instructor 28.14 15060 ‐ Educational Technologist 25.98 15070 ‐ Flight Instructor (Pilot) 40.79 15080 ‐ Graphic Artist 19.06 15085 ‐ Maintenance Test Pilot, Fixed, Jet/Prop 33.19 15086 ‐ Maintenance Test Pilot, Rotary Wing 33.19 15088 ‐ Non‐Maintenance Test/Co‐Pilot 33.19 15090 ‐ Technical Instructor 18.16

15095 ‐ Technical Instructor/Course Developer 22.74 15110 ‐ Test Proctor 14.65 15120 ‐ Tutor 14.65 16000 ‐ Laundry, Dry‐Cleaning, Pressing And Related Occupations 16010 ‐ Assembler 8.89 16030 ‐ Counter Attendant 8.89 16040 ‐ Dry Cleaner 11.25 16070 ‐ Finisher, Flatwork, Machine 8.89 16090 ‐ Presser, Hand 8.89 16110 ‐ Presser, Machine, Drycleaning 8.89 16130 ‐ Presser, Machine, Shirts 8.89 16160 ‐ Presser, Machine, Wearing Apparel, Laundry 8.89 16190 ‐ Sewing Machine Operator 12.06 16220 ‐ Tailor 12.87 16250 ‐ Washer, Machine 9.70 19000 ‐ Machine Tool Operation And Repair Occupations 19010 ‐ Machine‐Tool Operator (Tool Room) 18.19 19040 ‐ Tool And Die Maker 22.21 21000 ‐ Materials Handling And Packing Occupations 21020 ‐ Forklift Operator 13.47 21030 ‐ Material Coordinator 20.31 21040 ‐ Material Expediter 20.31 21050 ‐ Material Handling Laborer 10.84 21071 ‐ Order Filler 11.20 21080 ‐ Production Line Worker (Food Processing) 13.47 21110 ‐ Shipping Packer 13.87 21130 ‐ Shipping/Receiving Clerk 13.87 21140 ‐ Store Worker I 12.19 21150 ‐ Stock Clerk 16.90 21210 ‐ Tools And Parts Attendant 13.47 21410 ‐ Warehouse Specialist 13.47 23000 ‐ Mechanics And Maintenance And Repair Occupations 23010 ‐ Aerospace Structural Welder 21.10 23019 ‐ Aircraft Logs and Records Technician 16.75 23021 ‐ Aircraft Mechanic I 19.95 23022 ‐ Aircraft Mechanic II 21.10 23023 ‐ Aircraft Mechanic III 22.33 23040 ‐ Aircraft Mechanic Helper 14.56 23050 ‐ Aircraft, Painter 18.74 23060 ‐ Aircraft Servicer 16.75 23070 ‐ Aircraft Survival Flight Equipment Technician 18.74 23080 ‐ Aircraft Worker 17.96 23091 ‐ Aircrew Life Support Equipment (ALSE) Mechanic 17.96 I 23092 ‐ Aircrew Life Support Equipment (ALSE) Mechanic 19.95

II

23110 ‐ Appliance Mechanic 18.68 23120 ‐ Bicycle Repairer 14.62 23125 ‐ Cable Splicer 21.18 23130 ‐ Carpenter, Maintenance 16.54 23140 ‐ Carpet Layer 17.45 23160 ‐ Electrician, Maintenance 21.97 23181 ‐ Electronics Technician Maintenance I 20.84 23182 ‐ Electronics Technician Maintenance II 23.49 23183 ‐ Electronics Technician Maintenance III 27.74 23260 ‐ Fabric Worker 16.31 23290 ‐ Fire Alarm System Mechanic 17.96 23310 ‐ Fire Extinguisher Repairer 15.13 23311 ‐ Fuel Distribution System Mechanic 19.30 23312 ‐ Fuel Distribution System Operator 15.69 23370 ‐ General Maintenance Worker 16.08 23380 ‐ Ground Support Equipment Mechanic 19.95 23381 ‐ Ground Support Equipment Servicer 16.75 23382 ‐ Ground Support Equipment Worker 17.96 23391 ‐ Gunsmith I 15.36 23392 ‐ Gunsmith II 17.45 23393 ‐ Gunsmith III 19.92 23410 ‐ Heating, Ventilation And Air‐Conditioning 18.91

Mechanic 23411 ‐…