W912BV-17-Q-0007_NAV_Janitorial.pdf

SEE ADDENDUM

(No Collect Calls)

W912BV-17-Q-0007 22-Nov-2016

b. TELEPHONE NUMBER 8. OFFER DUE DATE/LOCAL TIME

08:00 AM 22 Dec 2016

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912BV9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

DOUGLAS D BUFFINGTON

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

WOMEN-OWNED SMALL

BUSINESS (WOSB)

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

CONTRACTING DIV

USACE, TULSA 1645 S 101 E AVE

TULSA OK 74128-4609

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

ECONOMICALLY DISADVANTAGED

WOMEN-OWNED SMALL BUSINESS

(EDWOSB)

SIZE STANDARD:

$18,000,000.00

NAICS:

561720

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF91

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912BV-17-Q-0007

Section A - Solicitation/Contract Form

INSTRUCTIONS TO OFFERORS

Instructions to Offerors

Read the solicitation in its entirety and all amendments and complete the checklist before submitting documents.

Payments will be made after receipt of a proper invoice and receipt of acceptable supplies or services. Regular office hours: Monday to Friday, 8:00 a.m. to 4:30 p.m. CST

MAIL, FAX, EMAIL or HAND DELIVER YOUR DOCUMENTS

Do not include excess information, to include audio‐visual materials, electronic media, CD’s, thumbdrives, etc. or pages of the solicitation that do not contain information provided by the perspective offeror. NO cross outs or strike through marks. Submit a legible quote with no correction marks.

EMAIL

Emailed quotes in a file format readible by Adobe or MicroSoft Office readable file formats are the only acceptable methods of submitting a quote electronically. All documents must be attached in one file. Reference the solicitation in the subject line. Send quotes to E‐mail address Douglas.D.Buffington@usace.army.mil. Ensure your quote is received before the due date and time. In order for your quote to be considered responsive, all required materials must be received before the due date and time. If all required materials are not received your quote will not be considered.

FAX or MAIL

Include a cover sheet that references the Contract Specialist – Douglas Buffington and the solicitation number.

When submitting through mail ensure you clearly mark the envelope to:

TULSA DISTRICT CORPS OF ENGINEERS

DOUGLAS BUFFINGTON, CECT‐SWT‐E

1645 S. 101ST EAST AVE

TULSA, OK 74128‐4609

FAX: (918) 669‐7495

Clearly mark the envelope in the lower left hand corner with the solicitation number. All pages should be numbered. Use only 8 ½ by 11 inch paper for fax or mail submissions. Do not use fold‐outs (e.g., 11” x 14” or 11” x

17” sheets). Do not use a font size smaller than 10, or condensed print for any submission. Time New Roman or

Arial Font are the only acceptable fonts. All page margins must be at least 1 inch wide, but may include headers and footers. Illegible handwritten quotes will not be considered. Typed quotes are highly encouraged and the preferred method. Do not use spring clamps, staples, or exceed the recommended capacity of the fastener or binder.

Do not use plastic multi‐hole/spiral binding systems, heat binding systems, or other systems which do not facilitate the ready insertion of additional pages or removal of pages. DO NOT use tabbed dividers, flagged tabs, or any divider that extends beyond the paper size to separate sections. The pages must be able to be removed from their binding without ripping or tearing. Ensure to allow enough time to submit your quote before the due date and time.

HAND DELIVER

If your submission will be hand‐carried, please provide notification to the Contract Specialist at least one working day in advance (918‐669‐7078) or Douglas.D.Buffington@usace.army.mil, as unescorted visitors are not allowed in the Contracting Division offices. Please consider in your arrival that visitors must go through security check points.

Offerors can only submit their documents to the Contract Specialist or a Contracting Officer of the Tulsa District

Office. The address of the Tulsa District Office is below:

TULSA DISTRICT CORPS OF ENGINEERS

1645 S. 101ST EAST AVE

TULSA, OK 74128‐4609

This procurement is being conducted in accordance with Simplified Acquisition Procedures (SAP) of FAR Parts 12 and 13. Any reference to offers or bids or offerors or bidders should be substituted with quotations or quoters. All reference to discussions shall not be interpreted under FAR Part 15, but rather indicate that the Government may communicate with offerors/quoters as allowed under simplified acquisition procedures.

Submit the following documents:

1) A signed copy of the 1st page of the solicitation and all amendments

2) Complete the past performance references page, if included in solicitation.

3) Complete the Excel pricing schedule provided in the solicitation (all cells except for the unit prices are locked).

4) Complete all FAR Clauses with applicable blanks filled in from SECTIONS I, K, L, and M

INQUIRIES – OFFEROR’S QUESTIONS AND COMMENTS

USE OF BIDDER’S INQUIRY

Prospective offerors shall submit questions and inquiries related to this solicitation in accordance with the following (no other means of questions or inquiries will be answered except through Bidder Inquiry):

a. For information related to amendments, and the dates set for receipt of proposals, please check http://www.fedbizopps.gov

b. Contractual and Technical inquiries and questions relating to proposal procedures are to be submitted via Bidder Inquiry in ProjNet at https://www.projnet.org/projnet.

1. To submit and review bid inquiry items, offerors will need to be a current registered user or self‐register into the system. To self‐register go to the aforementioned web page and click on the BID tab. Select Bidder Inquiry, select agency USACE, and enter the Bidder Inquiry Key for this solicitation listed below, your e‐mail address, and then click login. Fill in all required information and click create user. Verify that information on next screen is correct and click continues.

2. From this page you may view all bidder inquiries or add an inquiry.

3. Bidders will receive an acknowledgement of their question via e‐mail, followed by an answer to their question after it has been processed.

4. The Solicitation Numbers are: W912BV‐17‐Q-0007

The Bidder Inquiry Key is: Y76Z7J-XNHKC7

5. Address/enter only one question/issue per entry.

c. The Bidder Inquiry System will be unavailable for new inquiries 2:00pm (Central) Thursday, 15 December 2016 in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary.

d. Offerors are requested to review the specification in its entirety, and review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry.

e. The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800‐428‐HELP.

f. Offers will NOT be publicly opened. Information concerning the status of the evaluation and/or award will NOT be available after receipt of proposals.

g. The point of contact for this solicitation is:

Contract Specialist: Douglas Buffington Telephone: 918‐669‐7078 E‐MAIL: Douglas.D.Buffington@usace.army.mil

PREPROPOSAL/SITE VISIT CONFERENCE

A Preproposal Conference/Site Visit is scheduled for 10:00 AM local time on 13 December 2016 at the US Army

Corps of Engineers Navigation Office. From Sallisaw, Oklahoma and I‐40 go South on Hwy 59 approximately 8 miles. Look for Navigation sign on the right, turn right off of Hwy 59, the Project office will be on the right in approximately 300 yards. The address is 114302 S. 4629 Road, Sallisaw, Ok 74955

ANTITERRORISM AND OPERATIONS SECURITY REQUIREMENTS

The Government will provide the successful offeror with the required Army iWatch Antiterrorism Briefing documentation within two (2) business days of Contract Award.

Section B - Supplies or Services and Prices

PRICE SCHEDULE

JANITORIAL SERVICES FOR NAVIGATION

PROJECT OFFICE AND MARINE TERMINAL

BASE PERIOD: 1 FEBRUARY 2017 THROUGH 31 JANUARY 2018 $ ‐

CLIN Item QTY Unit Unit Price Amount

0001 JANITORIAL SERVICES FOR NAV PRO OFC 12 Month $ ‐ $ ‐

0002 CARPET CLEANING 2 Each $ ‐ $ ‐

0003 WINDOW WASHING 2 Each $ ‐ $ ‐

0004 MARINE TERMINAL OFFICE 12 Month $ ‐ $ ‐

TOTAL $ ‐

OPTION 1: 1 FEBRUARY 2018 THROUGH 31 JANUARY 2019

1001 JANITORIAL SERVICES FOR NAV PRO OFC 12 Month $ ‐ $ ‐

1002 CARPET CLEANING 2 Each $ ‐ $ ‐

1003 WINDOW WASHING 2 Each $ ‐ $ ‐

1004 MARINE TERMINAL OFFICE 12 Month $ ‐ $ ‐

OPTION 2: 1 FEBRUARY 2019 THROUGH 31 JANUARY 2020

2001 JANITORIAL SERVICES FOR NAV PRO OFC 12 Month $ ‐ $ ‐

2002 CARPET CLEANING 2 Each $ ‐ $ ‐

2003 WINDOW WASHING 2 Each $ ‐ $ ‐

2004 MARINE TERMINAL OFFICE 12 Month $ ‐ $ ‐

OPTION 3: 1 FEBRUARY 2020 THROUGH 31 JANUARY 2021

3001 JANITORIAL SERVICES FOR NAV PRO OFC 12 Month $ ‐ $ ‐

3002 CARPET CLEANING 2 Each $ ‐ $ ‐

3003 WINDOW WASHING 2 Each $ ‐ $ ‐

3004 MARINE TERMINAL OFFICE 12 Month $ ‐ $ ‐

OPTION 4: 1 FEBRUARY 2021 THROUGH 31 JANUARY 2022

4001 JANITORIAL SERVICES FOR NAV PRO OFC 12 Month $ ‐ $ ‐

4002 CARPET CLEANING 2 Each $ ‐ $ ‐

4003 WINDOW WASHING 2 Each $ ‐ $ ‐

4004 MARINE TERMINAL OFFICE 12 Month $ ‐ $ ‐

Section C - Descriptions and Specifications

STATEMENT OF WORK

SPECIFICATIONS

NAVIGATION PROJECT OFFICE

MARINE TERMINAL

OKLAHOMA

MAINTENANCE CONTRACT

FOR

JANITORIAL WORK

ORGANIZATION OF SPECIFICATIONS

This specification consists of a general section supplemented by exhibits and appendices. A Table of

Contents is provided on the following pages.

The general section contains requirements that apply to all work to be performed under the provisions of this specification. The exhibits contain detailed listings or examples referred to in the general section and the Performance Requirements. The appendices contain a description of the facilities to be serviced and the work to be performed.

Any reference to paragraphs or subparagraphs in this specification will refer to those in the general section unless otherwise noted.

TABLE OF CONTENTS

Para. No. Paragraph Title

1 Scope of Work

2 Definitions

3 References

4 Initiation, Execution, & Acceptance of Work

5 Personnel

6 Equipment

7 Materials and Supplies

8 Performance Requirements

9 Contractor Quality Control

10 Deductions for Deficient Work

11 Safety and Security

12 Contractor's Facilities

13 Work Schedules

14 Reporting Defective Facilities

15 Building Security

16 Prework Conference

17 Contractor Submittals

18 Billing

19 Required Insurance and Insurance Certificate

20 Antiterrorism and Operations Security Requirements

EXHIBITS

No. TITLE

1 Quality Assurance Report

2 Specifications for Contractor‐Furnished Materials and Supplies

3 Performance Requirements Table

4 Invoice Format

5 Quality Control Inspection Log

APPENDICES

Appendix Title

A Janitorial Work ‐ Navigation Project Office

B Janitorial Work ‐ Marine Terminal

1. SCOPE OF WORK. The work required under this specification provides for the janitorial work at the project office complex.

2. DEFINITIONS.

2.1. Contractor Quality Control (CQC). The contractor's system of controlling the quality of services provided under the provisions of the contract.

2.2. Deficient Service. Any service provided by the contractor that does not meet the Performance

Standards specified in the Performance Requirements given in Exhibit 3.

2.3. Government. The term "Government" as used herein means the United States of America.

2.4. Performance Requirement (PR). The Government's requirement for each service provided under the contract. Performance Standard (PStd) specifies the minimum standard (quality) for each service provided under the contract.

2.5. Project. The term "project" as used herein means all Government property and easements at Robert

S. Kerr Lake.

2.6. Quality. Conformance with the contract specification.

2.7. Quality Assurance (QA). The procedure by which the Government determines CQC is functioning effectively.

2.8. Regulations. The term "regulations" refers to any local, state, or Federal law or regulation applicable to operation or maintenance of the project.

2.9. Workday. Any day, Monday through Friday, exclusive of Federal holidays. This definition should not be interpreted to mean work is not required by this specification on other days.

3. REFERENCES. Corps of Engineers Safety and Health Requirements Manual (EM 385‐1‐1, current issue) is hereby incorporated into this specification. EM385‐1‐1 is available on‐line at:

http://www.usace.army.mil/SafetyandOccupationalHealth/SafetyandHealthRequirementsManual.aspx

4. INITIATION, EXECUTION, AND ACCEPTANCE OF WORK.

4.1. Initiation and Execution of work shall be in accordance with this specification.

4.2. Acceptance of Work. The Government shall accept work unless the Contracting Officer or

Contracting Officer’s Representative (COR) notifies the contractor of deficient services.

4.2.1. Initial notification of deficiencies may be written or oral; however, all oral notification shall be confirmed by the Contracting Officer or the COR in writing within two (2) workdays. Written notification shall be provided by completing Parts I, II, and III of a Quality Assurance Report (SWT Form

982, Exhibit 1).

4.2.2. If the Contracting Officer or the COR notifies the contractor of deficient work, the contractor shall initiate action to accomplish corrective work. Work performed on a daily schedule shall be reperformed the same day. Work performed on less than a daily schedule shall be reperformed not later than the following day. Refer to paragraph 10 for deficient work not reperformed.

4.2.3. The contractor shall notify the Contracting Officer and the COR when deficiencies have been corrected by completing Part IV of the QA Report, provided it has been furnished the contractor. If not, notification shall be made orally. When work has been corrected, the Contracting Officer or the COR shall complete Part V of the QA Report and furnish the contractor a copy. A copy will also be provided the Contracting Officer at the Tulsa District Office.

5. PERSONNEL. The contractor shall provide personnel necessary to accomplish all work required by this specification within specified time limits.

5.1. Experience and Skills. The contractor shall provide personnel that are experienced and demonstrate proficiency in the skills required to perform the various types of work specified.

5.2. Supervision.

5.2.1. The contractor shall provide one supervisor on the project who shall‐have full authority to direct any work required. This supervisor, and alternates who shall have full authority to execute work during their absence, shall be designated in writing to the Contracting Officer and the COR.

5.2.2. The contractor shall provide the Contracting Officer and the COR a local or toll‐free telephone number at or through which the supervisor can be reached between 8:00 a.m. and 4:30 p.m.

on all days work is being performed. Use of a cellular‐type phone is acceptable.

specified time limits.' Upon request, the contractor shall present equipment to the Contracting Officer for inspection.

6. EQUIPMENT. The contractor shall furnish equipment necessary to accomplish all work required by this specification within specified time limits.

6.1. Upon request from the Contracting Officer or the COR, the contractor shall present equipment to the Contracting Officer or the COR for inspection. Equipment brought to the project shall not be used until it has passed inspection. The Contracting Officer or the COR shall establish the time and location for these inspections.

6.2. All motorized equipment shall be powered by 115 Volts AC.

6.3. All equipment must be in good operating and mechanical condition and shall comply with EM 385‐1‐

1.

6.4 While performing work under this contract, vehicles shall be operated only by legally licensed drivers and parked only on roads, parking areas, or pullouts unless the Contracting Officer and the Site/Lake

Manager approves use of other areas.

7. MATERIALS AND SUPPLIES. 7.1. Contractor Furnished.

7.1.1. Except for the items listed in subparagraph 7.2., the contractor shall furnish all materials and supplies necessary to accomplish all work required by this specification within specified time limits.

7.1.2. All materials and supplies shall be new/in good repair and adequate quantities shall be maintained to perform the required services without interruptions. All materials and supplies are subject to review by the Contracting Officer or the COR to determine compliance with this specification.

7.1.3. Specifications for selected contractor‐furnished materials and supplies are given in Exhibit

2.

7.1.4. In addition to materials and supplies listed in Exhibit 2, the contractor shall furnish the following utilizing biobased products for cleaning supplies and recycled content paper products, trash bags, and plastics for all Contractor furnished material:

Cleaning compounds

Carpet Shampoo

Disinfectants

Glass Cleaner

Mops, brooms, etc

Spot Remover for carpets and upholstered chairs

Wax and stripping agents for tile floors

Insecticide

7.2. Government Furnished. The Government will furnish potable water.

8. PERFORMANCE REQUIREMENTS. Performance Requirements (PRs) for work performed under this specification are given in Exhibit 3. The contractor's performance will be evaluated using these PRs as follows:

8.1. Services provided by the contractor will be inspected for compliance with PStds. Those not meeting

PStds shall be considered deficient. Major or recurring minor deficiencies will result in a letter of correction being issued by the COR.

8.2. Deficient services are determined during initial QA inspections since the purpose of QA is to determine how well CQC is functioning. The results of inspections are not changed as a result of satisfactory reperformance. Deficient services determined in this manner will be used to compute defect rates. These defect rates will be compared to PSTDs to determine whether the contractor’s performance is acceptable.

9. CONTRACTOR QUALITY CONTROL. The contractor shall establish and execute a CQC Program in accordance with clause 52.246‐1 "Inspection of Services" to assure that all work required by this specification is completed on schedule and in accordance with the PRs in Exhibit 3.

9.1. Results of quality control inspections conducted by the contractor shall be entered on the Quality

Control Inspection Log (SWT Form 990, Exhibit 5). Furnish a copy of completed inspection logs to the

Contract Officer’s Representative weekly.

9.2. Requirements in 9.1. may be waived by the COR if it is determined proper CQC can be achieved without the required submissions. This determination will normally be made on the basis of actual performance by the contractor and shall be made in writing by the COR. If submissions are again required after being waived this reinstatement shall not be considered as grounds for a price increase.

10. DEDUCTIONS FOR DEFICIENT WORK. Deductions from the contractor's scheduled earnings shall be made for services that do not meet the PStds in Exhibit 3. Deductions for documented defects will be made in accordance with the following procedures:

10.1. Each service found deficient and reperformed by the contractor: No deduction.

10.2. Each service found deficient and performed by the Government: Deduction for loss in value shall be based on the Government's cost for performing the work.

10.3. Each service found deficient and performed by another contractor: Deduction is the contract price paid the other contractor to perform the work.

10.4. Each service found deficient and not reperformed by anyone, or work not performed at all:

Deduction for loss in value shall be based on estimates of the contractor's cost for performing the work, i.e., labor, materials, equipment costs, work schedules, etc. Loss in value shall be based on the contract bid price or applicable portion thereof.

11. SAFETY.

11.1. Safety Plan. The contractor shall furnish the Contracting Officer and the COR a safety plan to implement the general policies and procedures for safe operation and maintenance of the project in accordance with EM 385‐1‐1. The safety plan shall include, but not be limited to the following:

11.1.1. Procedures for training employees in responsibilities for safety of others, including the general public.

11.1.2. Requirements for wearing or utilizing personal safety equipment and apparel.

11.1.3. Procedures for handling, reporting, and correcting unsafe conditions, practices, and safety violations.

11.1.4. Procedures for treating and transporting injured persons to medical facilities.

11.2. Safety Violations. If a contractor's employee persists in not following the safety requirements of this specification or the contractor's safety plan, the employee shall be permanently discharged upon the request of the Contracting Officer.

11.3. Personal Clothing and Safety Apparel. Contractor personnel shall wear clothing suitable for the weather and working conditions. The minimum shall be short‐sleeve shirt and long trousers (no sleeveless shirts or tank tops, or shorts). Clothing shall be in good repair. Personnel, when required by

Section 5, EM 385‐1‐1, will wear additional protective apparel.

11.4. Accident Reports.

11.4.1. The contractor shall immediately notify the Contracting Officer and the COR of all known accidents that occur at the project and result in death or serious injury.

11.4.2. The contractor shall investigate all accidents involving contractor or subcontractor employees that result in death, traumatic injury, occupational disease, or damage to property, materials, supplies and equipment incidental to work performed under this specification. The results of investigations shall be reported to the Contracting Officer immediately, and in writing on ENG Form

3394, Accident Investigation Report, within one (1) workday following the accident.

11.5. Exposure Reports. The contractor shall maintain an accurate record of exposure data (man‐hours worked) and submit the figure in writing monthly by the 2nd workday of the following month.

12. CONTRACTOR'S FACILITIES. A storage closet is available at the project office for storage of janitorial supplies and equipment.

13. WORK SCHEDULES. Prior to starting work, the contractor shall furnish the Contracting Officer and the

COR a schedule for performing all janitorial work that is required at a weekly frequency or less. A revised schedule shall be furnished the Contracting Officer prior to the contractor changing his mode of operation.

14. REPORTING DEFECTIVE FACILITIES. While performing work, contractor personnel shall observe the condition of Government facilities. Damaged, defective, and/or inoperative facilities shall be reported to the COR or Site Manager each workday.

15. BUILDING SECURITY. The names of contractor personnel authorized to perform work under this contract shall be furnished the Contracting Officer. Only those persons whose name appears on this list shall be allowed access to buildings. When Government personnel are not present while work is being performed, contractor personnel shall keep buildings locked and refuse entrance to anyone who does not have a key to the buildings. Contractor personnel will be instructed in the operation of intruder alarm systems and will be responsible for correct operation of these devices when work is performed and Government personnel are not present.

16. PREWORK CONFERENCE. The Contracting Officer or their designated representative shall conduct a

Prework Conference with the contractor to discuss the provisions of this specification and the contractor's submittals listed in paragraph 17 below. As a minimum, the officer of the company that signed the contract and the on‐site supervisor shall represent the contractor. The Contracting Officer or their designated representative shall establish the location, date, and time of the Prework Conference after consultation with the contractor.

17. CONTRACTOR SUBMITTALS. Unless otherwise noted, the contractor shall submit the documents listed below to the Contracting Officer and the COR prior to starting work. All submittals, other than copies of contracts and security forms with personal information, shall be typed and the original and one copy shall be furnished the Contracting Officer. If the Contracting Officer determines any of the submittals do not comply with this specification, the contractor shall resubmit these documents within one (1) week.

17.1. Names of supervisor and the alternate (submit prior to initiation of work and prior to changing designated employees) (subparagraph 5.2.1.).

17.2. Safety Plan (subparagraph 11.1.).

17.3. Exposure reports (submit by 2nd workday of each month) (subparagraph 11.5.).

17.4. Work schedules (submit prior to initiation of work and prior to changing schedules) (paragraph

13.).

17.5. Insurance Certification submitted prior to initiating work (paragraph 19)

17.6. AT/OPSEC Training form provided prior to initiation of work and prior to any employee entering the facility (paragraph 20)

17.7. Background check initiated with the Tulsa District Security Officer (subparagraph 20.2.)

18. BILLING.

18.1. The contractor shall submit the original and two copies of invoices at the end of each month for all completed work.

18.2. Invoices shall be prepared in the format shown at Exhibit 4.

18.3. All exposure reports shall be submitted before an invoice will be accepted.

18.4. Invoices and supporting documents shall be delivered or mailed to the Project Manager, Navigation Project Office, HC‐61 Box 238, Sallisaw, Oklahoma 74955.

19 REQUIRED INSURANCE AND INSURANCE CERTIFICATE. Pursuant to FAR 28.301(b) for the protection of the Government, and FAR 28.306(b) and 52.228‐ 5, Work on a Government Installation, the Contractor shall procure and maintain during the entire period of his performance under this contract the following minimum insurance:

19.1. Worker’s Compensation and Employer’s Liability: Workers' compensation and employers' liability insurance in compliance with applicable state statutes, with a minimum liability coverage of $100,000.

19.2. General Liability: Comprehensive general liability insurance for bodily injury in the minimum limits of $500,000 per occurrence. Property damage liability insurance shall be required in an amount of at least $100,000.

19.3. Automobile liability: Liability insurance shall be written on the comprehensive form of policy. The policy shall provide for bodily injury and property damage liability covering the operation of all automobiles used in connection with performing the contract. Policies covering automobiles operated in the United States shall provide coverage of at least $200,000 per person and $500,000 per occurrence for bodily injury and $20,000 per occurrence for property damage. The amount of liability coverage on other policies shall be commensurate with any legal requirements of the locality and sufficient to meet normal and customary claims.

20. Antiterrorism And Operations Security Requirements: The Contractor shall be responsible for ensuring all personnel, to include sub‐contractor personnel, comply with the training requirements and procedures identified on the document titled “Antiterrorism/Operations Security Requirements” in

Section H, Special Contract Requirements. When items for which training is identified, the Contractor shall ensure that all personnel complete acknowledgement for the specified training; the Contractor is responsible for ensuring all training acknowledgments, when applicable, are submitted to the COR or

Contracting Officer within 10 calendar days of contract award (or NTP for construction contracts). In no event shall any contractor or sub‐contractor personnel be onsite prior to completion of any applicable training, submission of training verification, and initiation of background check.

20.1. Training materials and verification forms will be provided within two business days of Contract

Award.

20.2. Per the ANTITERRORISM/OPERATIONS SECURITY REQUIREMENTS, Jun 2015, incorporated in

SECTION H, Item 2b:

20.2.1. For contractors who do not require CAC, but require access to a DoD facility or installation. Proposed language: Contractor and all associated sub‐contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate

Identification Index (NCIC‐III) and Terrorist Screening Database (TSDB) (Army Directive 2014‐05 / AR

190‐13), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative, as NCIC and TSDB are available), or, at

OCONUS locations, in accordance with status of forces agreements and other theater regulations.

20.2.2. Contractor personnel who are intended to access Government Facilities unescorted

MUST provide the following to the Tulsa District Security Officer prior to attempting to access

Government Facilities:

1. PSIP Form completed (Form will be provided upon request)

2. OF 0306 completed

3. Two copies of FD 258 (finger print cards) completed

4. Copy of birth certificate, passport, or Certificate of Naturalization

5. Copy of State issued drivers license or state ID

6. Resume' covering seven years

7. Employees will need to complete the SF 86 and retain this copy. Employees should retain copies of all the above forms.

20.2.3. Once the above forms are turned over the background check will be initiated. The

Employees will receive notification/email from the Office of Personnel Management providing them information to fill out an SF 85 on‐line.

EXHIBIT 1

QUALITY ASSURANCE REPORT

The Quality Assurance Report (SWT Form 982) is provided at SECTION J as Attachment 1.

EXHIBIT 2

SPECIFICATIONS FOR CONTRACTOR‐FURNISHED

MATERIALS AND SUPPLIES

ITEM APPENDIX SPECIFICATION

HAND SOAP A LIQUID, HIGH LATHERING &

SUDSING CHARACTERISTICS,

MILDLY PERFUMED (WOMEN).

HAND SOAP A BAR, LAVA OR EQUIVALENT

(MENS).

REFUSE CONTAINER A PLASTIC, 8 TO 32 GALLON.

TISSUE PAPER A 2-PLY BATH TISSUE, NON-

BLEACHED, NATURAL, SEPTIC

TANK

SAFE, MINIMUM OF 500 SHEETS

PER ROLL, 100% POST CONSUMER

WASTE RECYCLED MATERIALS,

#100, FORT HOWARD CO. OR

EQUALTOWELS A SINGLE PLY, SINGLE-FOLD,

NATURAL, 40% POST CONSUMER

WASTER RECYCLED MATERIALS TO

MEET EPA GUIDELINES AS

SPECIFIED IN THE FEDERAL

REGISTER #150, FORT HOWARD OR

EQUAL.

URINAL DEODORANT CAKE A PERFUMED, COMMERCIAL QUALITY,

SEPTIC TANK SAFE.

EXHIBIT 3

PERFORMANCE REQUIREMENTS

Service Requirement PR No. Performance Standard

APPENDIX A & B

Dust furniture, etc.

1 All surfaces free of dust.

Clean floors 2 Clean. No litter, mop strands, streaks, swirl marks, or detergent residue left on floors. No splash marks on furniture, walls, baseboards, etc.

Buff floors 3 Entire floor has a uniform, glossy appearance. No scuffmarks or visible wax buildup. Baseboards, furniture, etc., shall be free of cleaning and waxing solutionsVacuum carpets 4 Clean.

Clean mirrors & glass (other than windows)

5 Clean, no streaks.

Clean restrooms 6 Odor-free. All fixtures, walls, & floors clean. Lavatories, urinals, commodes, & floors sanitary. Soap, towels, & toilet tissue adequate until next cleaning day.

Clean drinking fountains

7 Clean, sanitary.

Grounds keeping 8 Grounds, parking areas, & sidewalks, iRefuse collection 9 Containers empty. Liners clean and not torn.

Refuse disposal 10 Refuse deposited in dumpsters. No refuse left outside dumpsters.

EXHIBIT 4

INVOICE FORMAT

BILLING FOR

MAINTENANCE CONTRACT

PROJECT: ________________________________ SHEET ___ OF ___

CONTRACTOR: _____________________________ DATE: ___________

ADDRESS: ________________________________ CONTRACT NO: W912BV‐17‐P‐____

BILLING PERIOD: ________ THRU __________ INVOICE NO: __________

PAYMENT TERMS: ____________________________

(Payment Discount or N/A)

CDM OR

BID ITEM NO. DEDUCTION AMOUNT TOTAL

PAYMENT REQUESTED: ______________

CONTRACTOR (Signature/Date)

EXHIBIT 5

QUALITY CONTROL INSPECTION LOG

Quality Control Inspection Log (SWT Form 990) is provided at SECTION J as Attachment 2.

APPENDIX A

JANITORIAL WORK ‐ NAVIGATION PROJECT OFFICE

1. FACILITIES TO BE SERVICED. The facilities to be serviced under the provisions of this appendix consist of the project office and contiguous exterior areas. An inventory of these areas is given in Table A.

2. FREQUENCIES AND TIMES OF SERVICES. Services required shall be performed Monday thru Friday, excluding Federal holidays. All work shall be accomplished between 4:30 p.m. and 10:00 p.m.

3. DESCRIPTION OF WORK. The contractor shall perform the following work:

3.1. Interior Heated Areas (Excluding Restrooms).

3.1.1. Each cleaning day. Empty trash receptacles; check and fill paper towel dispenser in kitchen area; clean sinks and counter tops; clean drinking fountains; vacuum carpeted floors; and clean tile floors. Spot remover shall be used to remove new spills from carpeted floors. Electronic equipment, computers, printers, faxes, typewriters, radio, videocassette recorder, and copy machine shall not be cleaned.

3.1.2. Weekly. Dust venetian blinds, windowsills, office furniture, and pictures. The glass entry door and adjacent glass enclosures shall be cleaned.

3.1.3. Monthly. Clean vent covers. Dust ceiling fans. Waxed floors shall be buffed.

3.1.4. Quarterly. Tile floors shall be waxed. Tile floors shall be stripped prior to every second time they are waxed. Waxed floors shall be buffed.

3.2. Restrooms.

3.2.1. Each cleaning day. Clean mirrors and plumbing fixtures. A disinfectant shall be used to eliminate odor and minimize health hazards. Deodorant cakes shall be maintained in urinals. Empty the trash receptacles. Soap, paper towels, and toilet tissue dispensers shall be checked and filled if necessary. Wet mop floors. Excess water shall be removed from floors. Biological formations and resultant stains shall be removed from partitions.

3.2.2. Weekly. Clean partitions. Dust venetian blinds and windowsills.

3.2.3. Monthly. Clean vent covers. Buff tile floors.

3.2.4. Quarterly. Tile floors shall be waxed. Tile floors shall be stripped prior to every second time they are waxed.

3.3. Exterior Areas. Each cleaning day. Trash, debris, and accumulations of small litter shall be picked up.

Sidewalks shall be swept clean.

3.4. Flower Beds. Each cleaning day. Trash, debris, and small litter shall be picked up. The contractor shall weed, prune, water and spray for insects and diseases, as needed for the period 1 April through 31

October. The locations of the flowerbeds are: one inside the office compound and one at each of the two buffalo signs outside the office compound.

3.5. Lawn Area inside Project Office Compound. The contractor shall mow the area inside the project office compound for the period 1 April through 31 October. The area shall be maintained between a minimum height of 2 inches and a maximum height of 4 inches. Trimming and edging shall be performed with each mowing. Grass clippings shall be swept from sidewalks after each mowing.

3.6. Refuse Disposal. The contractor shall dispose of all refuse collected at the project office in the dumpster provided by others.

4. DESCRIPTION OF ADDITIONAL WORK REQUIREMENTS. The contractor may be required to perform the following work up to two times per year:

4.1. Carpet cleaning. The contractor shall shampoo carpeted floors. Spot remover shall be used to remove soiled spots.

4.2. Window washing. The contractor shall clean windows, including storm windows.

5. PERFORMANCE REQUIREMENTS. The work performed under this appendix shall comply with the PRs in Exhibit 3. The terms clean, sanitary, and odor‐free facilities are used in Exhibit 3 and are defined as follows.

5.1. Clean. The contractor shall vacuum, sweep, wash, wipe, or brush facilities to ensure that dirt, dust, rocks, debris, trash, garbage, fecal matter, urine, soap scum, biological formations and resultant stains, insects, insect nests and webs, and residue from cleaning agents are removed.

5.2. Sanitary. The contractor shall disinfect facilities each time they are cleaned.

5.3. Odor‐free. The contractor shall use a chemical agent in a manner that will eliminate odor from facilities.

TABLE A

INVENTORY OF FACILITIES

AREA SIZE

Interior Heated Areas with Carpeted Floors 1316 Square Feet

Interior Heated Areas with Vinyl Tile Floors 1092 Square Feet

Interior Heated Areas with tile Floors 2181 Square Feet

Restrooms 180 Square Feet

Sidewalks 144 Linear Feet

Exterior Areas (surfaced) 1 Acre

Lawn Area inside Project Office Compound 0.1 Acre

APPENDIX B

JANITORIAL WORK ‐ MARINE TERMINAL

1. FACILITIES TO BE SERVICED. The facilities to be serviced consist of the Marine Terminal office and exterior areas listed.

2. FREQUENCIES AND TIMES OF SERVICE. Services required shall be performed on Friday of each workweek excluding Federal Holidays. All work shall be accomplished between 8:00 a.m. and 4:30 p.m.

3. DESCRIPTION OF JANITORIAL WORK. The contractor shall perform the following work:

3.1. Interior Heated Areas (excluding restrooms). Empty trash receptacles, sweep and mop floors, clean sinks and countertops, dust venetian blinds, windowsills, office furniture and pictures.

3.2. Restroom. Clean mirror and plumbing fixtures. Deodorant cakes shall be maintained in urinals.

Empty trash receptacles. Wet mop floors. Excess water shall be removed from floors.

3.3. Exterior Office Area. Sweep exterior cement area outside front door under shelter.

3.4. Refuse Disposal. The contractor shall dispose of all refuse collected at the Marine Terminal in the dumpster provided by others.

4. PERFORMANCE REQUIREMENTS. The work performed under this appendix shall comply with the PRs in Exhibit 3. The terms clean, sanitary, and odor‐free facilities are used in Exhibit 3 and are defined as follows.

4.1. Clean. The contractor shall vacuum, sweep, wash, wipe, or brush facilities to ensure that dirt, dust, rocks, debris, trash, garbage, fecal matter, urine, soap scum, biological formations and resultant stains, insects, insect nests and webs, and residue from cleaning agents are removed.

4.2. Sanitary. The contractor shall disinfect facilities each time they are cleaned.

4.3. Odor‐free. The contractor shall use a chemical agent in a manner that will eliminate odor from facilities.

TABLE B

INVENTORY OF FACILITIES

AREA SIZE

Interior Heated Area 1,128 Square Feet

Restroom 55 Square Feet

Exterior Area 648 Square Feet

Section E - Inspection and Acceptance

CLAUSES INCORPORATED BY REFERENCE

52.246-1 Contractor Inspection Requirements APR 1984

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

52.242-15 Stop-Work Order AUG 1989

Section G - Contract Administration Data

252.201-7000 Contracting Officer's Representative DEC 1991 252.204-7006 Billing Instructions OCT 2005 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

Section H - Special Contract Requirements

WAGE RATES

WD 05‐2433 (Rev.‐17) was first posted on www.wdol.gov on 01/05/2016

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005‐2433 Daniel W. Simms Division of | Revision No.: 17 Director Wage Determinations| Date Of Revision: 12/29/2015 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 for calendar year 2016 applies to all contracts subject to the Service Contract Act for which the solicitation was issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.15 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2016. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Oklahoma

Area: Oklahoma Counties of Adair, Cherokee, Choctaw, Craig, Creek, Delaware, Haskell, Kay, Latimer, Le Flore, Mayes, McCurtain, McIntosh, Muskogee, Nowata, Okfuskee, Okmulgee, Osage, Ottawa, Pawnee, Pittsburg, Pushmataha, Rogers, Sequoyah, Tulsa, Wagoner, Washington **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE ‐ TITLE FOOTNOTE RATE

01000 ‐ Administrative Support And Clerical Occupations 01011 ‐ Accounting Clerk I 12.60 01012 ‐ Accounting Clerk II 15.33 01013 ‐ Accounting Clerk III 17.78 01020 ‐ Administrative Assistant 19.04 01040 ‐ Court Reporter 19.66 01051 ‐ Data Entry Operator I 10.88 01052 ‐ Data Entry Operator II 11.86 01060 ‐ Dispatcher, Motor Vehicle 17.99 01070 ‐ Document Preparation Clerk 12.66 01090 ‐ Duplicating Machine Operator 12.66 01111 ‐ General Clerk I 11.08 01112 ‐ General Clerk II 12.83 01113 ‐ General Clerk III 16.83 01120 ‐ Housing Referral Assistant 15.78 01141 ‐ Messenger Courier 11.72 01191 ‐ Order Clerk I 11.83 01192 ‐ Order Clerk II 13.79 01261 ‐ Personnel Assistant (Employment) I 13.16 01262 ‐ Personnel Assistant (Employment) II 14.43 01263 ‐ Personnel Assistant (Employment) III 17.57 01270 ‐ Production Control Clerk 18.65 01280 ‐ Receptionist 11.23 01290 ‐ Rental Clerk 13.33 01300 ‐ Scheduler, Maintenance 12.39 01311 ‐ Secretary I 12.39 01312 ‐ Secretary II 13.86 01313 ‐ Secretary III 15.78 01320 ‐ Service Order Dispatcher 14.95 01410 ‐ Supply Technician 19.04

01420 ‐ Survey Worker 13.71 01531 ‐ Travel Clerk I 12.32 01532 ‐ Travel Clerk II 13.14 01533 ‐ Travel Clerk III 13.77 01611 ‐ Word Processor I 11.77 01612 ‐ Word Processor II 13.35 01613 ‐ Word Processor III 14.97 05000 ‐ Automotive Service Occupations 05005 ‐ Automobile Body Repairer, Fiberglass 19.15 05010 ‐ Automotive Electrician 18.19 05040 ‐ Automotive Glass Installer 17.24 05070 ‐ Automotive Worker 17.24 05110 ‐ Mobile Equipment Servicer 15.14 05130 ‐ Motor Equipment Metal Mechanic 19.15 05160 ‐ Motor Equipment Metal Worker 17.24 05190 ‐ Motor Vehicle Mechanic 17.91 05220 ‐ Motor Vehicle Mechanic Helper 13.98 05250 ‐ Motor Vehicle Upholstery Worker 16.08 05280 ‐ Motor Vehicle Wrecker 17.19 05310 ‐ Painter, Automotive 18.22 05340 ‐ Radiator Repair Specialist 17.24 05370 ‐ Tire Repairer 13.29 05400 ‐ Transmission Repair Specialist 19.15 07000 ‐ Food Preparation And Service Occupations 07010 ‐ Baker 11.11 07041 ‐ Cook I 9.79 07042 ‐ Cook II 11.11 07070 ‐ Dishwasher 8.05 07130 ‐ Food Service Worker 7.83 07210 ‐ Meat Cutter 12.17 07260 ‐ Waiter/Waitress 8.38 09000 ‐ Furniture Maintenance And Repair Occupations 09010 ‐ Electrostatic Spray Painter 16.54 09040 ‐ Furniture Handler 11.67 09080 ‐ Furniture Refinisher 16.54 09090 ‐ Furniture Refinisher Helper 13.06 09110 ‐ Furniture Repairer, Minor 14.73 09130 ‐ Upholsterer 16.54 11000 ‐ General Services And Support Occupations 11030 ‐ Cleaner, Vehicles 11.50 11060 ‐ Elevator Operator 9.38 11090 ‐ Gardener 12.57 11122 ‐ Housekeeping Aide 9.38 11150 ‐ Janitor 9.38 11210 ‐ Laborer, Grounds Maintenance 10.68 11240 ‐ Maid or Houseman 8.48 11260 ‐ Pruner 10.07 11270 ‐ Tractor Operator 12.41 11330 ‐ Trail Maintenance Worker 10.68 11360 ‐ Window Cleaner 10.05 12000 ‐ Health Occupations 12010 ‐ Ambulance Driver 13.51 12011 ‐ Breath Alcohol Technician 15.83 12012 ‐ Certified Occupational Therapist Assistant 19.42 12015 ‐ Certified Physical Therapist Assistant 21.72 12020 ‐ Dental Assistant 13.38 12025 ‐ Dental Hygienist 31.40 12030 ‐ EKG Technician 18.82 12035 ‐ Electroneurodiagnostic Technologist 18.82 12040 ‐ Emergency Medical Technician 13.51 12071 ‐ Licensed Practical Nurse I 14.15 12072 ‐ Licensed Practical Nurse II 15.83 12073 ‐ Licensed Practical Nurse III 17.66 12100 ‐ Medical Assistant 13.05 12130 ‐ Medical Laboratory Technician 14.15 12160 ‐ Medical Record Clerk 12.54 12190 ‐ Medical Record Technician 14.03 12195 ‐ Medical Transcriptionist 14.83

12210 ‐ Nuclear Medicine Technologist 29.46 12221 ‐ Nursing Assistant I 10.26 12222 ‐ Nursing Assistant II 11.53 12223 ‐ Nursing Assistant III 12.59 12224 ‐ Nursing Assistant IV 14.12 12235 ‐ Optical Dispenser 14.54 12236 ‐ Optical Technician 13.51 12250 ‐ Pharmacy Technician 13.40 12280 ‐ Phlebotomist 13.60 12305 ‐ Radiologic Technologist 21.91 12311 ‐ Registered Nurse I 20.03 12312 ‐ Registered Nurse II 24.51 12313 ‐ Registered Nurse II, Specialist 24.51 12314 ‐ Registered Nurse III 29.66 12315 ‐ Registered Nurse III, Anesthetist 29.66 12316 ‐ Registered Nurse IV 35.55 12317 ‐ Scheduler (Drug and Alcohol Testing) 19.62 13000 ‐ Information And Arts Occupations 13011 ‐ Exhibits Specialist I 18.95 13012 ‐ Exhibits Specialist II 22.25 13013 ‐ Exhibits Specialist III 27.23 13041 ‐ Illustrator I 18.95 13042 ‐ Illustrator II 22.25 13043 ‐ Illustrator III 27.23 13047 ‐ Librarian 20.68 13050 ‐ Library Aide/Clerk 8.51 13054 ‐ Library Information Technology Systems 19.12 Administrator 13058 ‐ Library Technician 13.71 13061 ‐ Media Specialist I 13.50 13062 ‐ Media Specialist II 15.11 13063 ‐ Media Specialist III 16.84 13071 ‐ Photographer I 15.06 13072 ‐ Photographer II 17.50 13073 ‐ Photographer III 20.54 13074 ‐ Photographer IV 25.14 13075 ‐ Photographer V 30.42 13110 ‐ Video Teleconference Technician 15.24 14000 ‐ Information Technology Occupations 14041 ‐ Computer Operator I 14.71 14042 ‐ Computer Operator II 16.45 14043 ‐ Computer Operator III 21.59 14044 ‐ Computer Operator IV 25.11 14045 ‐ Computer Operator V 27.62 14071 ‐ Computer Programmer I 22.27 14072 ‐ Computer Programmer II (see 1) 14073 ‐ Computer Programmer III (see 1) 14074 ‐ Computer Programmer IV (see 1) 14101 ‐ Computer Systems Analyst I (see 1) 14102 ‐ Computer Systems Analyst II (see 1) 14103 ‐ Computer Systems Analyst III (see 1) 14150 ‐ Peripheral Equipment Operator 14.71 14160 ‐ Personal Computer Support Technician 28.80 15000 ‐ Instructional Occupations 15010 ‐ Aircrew Training Devices Instructor (Non‐Rated) 28.14 15020 ‐ Aircrew Training Devices Instructor (Rated) 34.04 15030 ‐ Air Crew Training Devices Instructor (Pilot) 40.79 15050 ‐ Computer Based Training Specialist / Instructor 28.14 15060 ‐ Educational Technologist 23.62 15070 ‐ Flight Instructor (Pilot) 40.79 15080 ‐ Graphic Artist 19.06 15090 ‐ Technical Instructor 18.16 15095 ‐ Technical Instructor/Course Developer 22.74 15110 ‐ Test Proctor 14.65 15120 ‐ Tutor 14.65 16000 ‐ Laundry, Dry‐Cleaning, Pressing And Related Occupations 16010 ‐ Assembler 8.47 16030 ‐ Counter Attendant 8.47

16040 ‐ Dry Cleaner 10.79 16070 ‐ Finisher, Flatwork, Machine 8.47 16090 ‐ Presser, Hand 8.47 16110 ‐ Presser, Machine, Drycleaning 8.47 16130 ‐ Presser, Machine, Shirts 8.47 16160 ‐ Presser, Machine, Wearing Apparel, Laundry 8.47 16190 ‐ Sewing Machine Operator 11.56 16220 ‐ Tailor 12.34 16250 ‐ Washer, Machine 9.27 19000 ‐ Machine Tool Operation And Repair Occupations 19010 ‐ Machine‐Tool Operator (Tool Room) 18.19 19040 ‐ Tool And Die Maker 22.21 21000 ‐ Materials Handling And Packing Occupations 21020 ‐ Forklift Operator 13.47 21030 ‐ Material Coordinator 18.65 21040 ‐ Material Expediter 18.65 21050 ‐ Material Handling Laborer 10.84 21071 ‐ Order Filler 11.20 21080 ‐ Production Line Worker (Food Processing) 13.47 21110 ‐ Shipping Packer 13.44 21130 ‐ Shipping/Receiving Clerk 13.44 21140 ‐ Store Worker I 12.19 21150 ‐ Stock Clerk 16.90 21210 ‐ Tools And Parts Attendant 13.47 21410 ‐ Warehouse…