Am-0002_W9128F-20-R-0082.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

Amendment No. 0002 W9128F

WASTE WATER TREATMENT PLANT ALTERATION, PN 97448 (FY20), FORT MCCOY, WISCONSIN

See attached documentation for content of the amendment revisions to solicitation

Date for receipt of proposals is 30 JUL 2020 at 1400 hours

Government Point of Contact: Phil Wickham, Contract Specialist, Phillip.L.Wickham@usace.army.mil

U.S.ARMY CORPS OF ENGINEERS, OMAHA

Rocky Mountain Area Office Attn: CONTRACTING DIVISION (CENWO-CT-M) 5475 Tech Center Drive, Suite 205 Colorado Springs, CO 80919

See Item 6

W9128F-20-R-0052

07/24/2020

04/16/2020

07/24/2020

Am #0002 - 1

Am #0002 - 2 (Continuation SF 30)

24 July 2020 Solicitation No. W9128F 20 R 0082

Date of Issue: 23 JUN 2020 New Date of Receiving Proposals: 30 JUL 2020

SUBJECT: Amendment No. 0002 to Request for Proposal Solicitation Package for Construction of WASTE WATER TREATMENT PLANT ALTERATION.

TO: Prospective Offerors and Others Concerned

1. The specifications and drawings for subject project are hereby modified as follows (revise all specification indices, attachment lists, and drawing indices accordingly).

a. Specifications. (Descriptive Changes.)

(1) Standard Form 1442 (SF1442), Page 00 10 00-1, item 13.A., delete the time and date for proposal receipt and substitute “1400” and “30 JUL 2020”.

(2) Section 00 21 00, Page 19, delete para. 1.20.1 “ESTIMATED CONSTRUCTION COST”, in its entirety and substitute the following:

“1.20.1 ESTIMATED CONSTRUCTION COST

The estimated construction cost of this project is between $5,000,000 and $10,000,000.”

(3) Section 01 30 00.24 Attachments, delete General Wage Rate Decision Number WI20200008 in its entirety and substitute General Wage Rate Decision Number WI20200008 dated 07/24/2020. General Wage Rate Decision Number WI20200008 dated 07/24/2020 is included as an attachment to this Amendment.

(4) Section 01 30 00.24 Attachments, delete General Wage Rate Decision Number WI20200011 in its entirety and substitute General Wage Rate Decision Number WI20200011 dated 07/24/2020. General Wage Rate Decision Number WI20200011 dated 07/24/2020 is included as an attachment to this Amendment.

b. Specifications (New and/or Revised and Reissued). Delete and substitute or add specification pages or sections as noted below. The substituted pages or sections are revised and reissued with this amendment. For convenience, on the revised specification pages, changes have been identified with highlighting, all portions of the revised specification pages apply regardless of whether changes are shown with highlighting.

Pages or Sections Deleted Pages or Sections Substituted or Added 00 22 00 00 22 00 01 33 39.00 10 01 33 39.00 10 01 45 00.00 10 01 45 00.00 10 01 78 39.00 24 01 78 39.00 24 05 40 00 05 40 00 05 51 00 05 51 00 40 95 00 40 95 00

Am #0002 - 3

Pages or Sections Deleted Pages or Sections Substituted or Added

** 40 95 00AT3 - EXISTING BLOWER AND JET MOTIVE

CONTROL PANEL - FOR INFORMATION ONLY.

(attachment added)

46 43 21 46 43 21 46 53 62 46 53 62

c. Drawings (Not Reissued). The following drawings are revised as indicated below with latest revision date of 24 JUL 2020. These drawings are not reissued with this amendment.

(1) Sheet CD101, SITE DEMOLITION AREA 1

(i)Revise note 13* from Sheet KeyNotes Base as indicated below:

“Abandon in place structures and associated equipment, including trickling filter media after construction is complete.

** This keynote is applicable to the Primary Clarifier North (Structure 15), the Trickling Filters North (Structure 30) and South (Structure 32), and Solids Contact Tank North (Structure 42)” and South (Structure 40)”

(ii) Revise note 2 from General Notes as indicated below:

“Remove waste material (biological solids) prior to abandonment of concrete structures, piping and associated equipment.”

(iii) Revise note 3 from General Notes as indicated below:

“All removed waste material (ferrous material and process equipment), shall be disposed off-site by the Contractor.”

(iv) Add new notes to General Notes as indicated below:

“4. Excess excavated material (suitable excess soil) shall be trucked to a borrow site, located less than 2 miles from the WWTP site.

5. The existing trickling filter media shall be used as backfill.

6. The removed concrete shall be taken to the concrete collection site on Fort McCoy for recycling.”

(2) Sheet CD102, SITE DEMOLITION AREA 2

(i)Revise note 13* from Sheet KeyNotes Base as indicated below:

“Abandon in place structures and associated equipment, including trickling filter media after construction is complete.

** This keynote is applicable to the Primary Clarifier North (Structure 15), the Trickling Filters North (Structure 30) and South (Structure 32), and Solids Contact Tank North (Structure 42)” and South (Structure 40)”

(ii) Revise note 2 from General Notes as indicated below:

“Remove waste material (biological solids) prior to abandonment of concrete structures, piping and associated equipment.”

(iii) Revise note 3 from General Notes as indicated below:

“All removed waste material (ferrous material and process equipment), shall be disposed off-site by the Contractor.”

Am #0002 - 4

(iv) Add new notes to General Notes as indicated below:

“4. Excess excavated material (suitable excess soil) shall be trucked to a borrow site, located less than 2 miles from the WWTP site.

5. The existing trickling filter media shall be used as backfill.

6. The removed concrete shall be taken to the concrete collection site on Fort McCoy for recycling.”

(3) Sheet CS103, SITE PLAN AREA 3

Add the word “of manufacturer” in the reference trench drain note.

Revised note: “Install 36’ of manufacturer segmented trench drain at bottom of drive. 4” drain lines lead into septage receiving. See sheet CU103.”

(4) Sheet CU200, HYDRAULIC PROFILE

Change the Top of Wall (T/Wall) Elevation of the Oxidation Ditch from “842.75” to “845.5”

(5) Sheet CU902, PIPING AND INSTRUMENTATION DIAGRAM

Delete the ”Oxidation Ditch Controls” Block. Reference specs Section 46 53 62 and sheet EI603SB (SERVICE BUILDING - CONTROL SYTEM I/O).

(6) Sheet ES101, ELECTRICAL SITE PLAN - AREA 1

(i) Add keyed note #3: "The circuit from EHH2 to the Septage Receiving

Station shall be 2" conduit with 3 - #10 AWG, with #12 GND"

(ii) Add keyed note symbol #3 next to electrical secondary line that continues off the page onto sheet ES103.

(7) Sheet ES102, ELECTRICAL SITE PLAN - AREA 2

Revise keyed note #4: "...WITH 6 AWG CU GND, IN 2" CONDUIT."

(8) Sheet ES601, ELECTRICAL SITE CONDUIT AND CABLE SCHEDULES

(i) In the CONDUIT AND CABLE SCHEDULE (CONTROL), in the FROM: CHH3 – TO:

MECH. BUILDING row, change the QTY of 2/C 14AWG from 7 to 3.

(ii) In the CONDUIT AND CABLE SCHEDULE (CONTROL), in the FROM: CHH2 – TO:

CHH3 row, change the QTY of 2/C 14AWG from 7 to 3.

(iii) In the CONDUIT AND CABLE SCHEDULE (CONTROL), in the FROM: CH13 – TO:

CHH2 row, change the QTY of 2/C 14AWG from 8 to 4.

(iv) Replace Note 1 with the following text:

“1. CONTRACTOR SHALL INSTALL A TOTAL OF 138-TYPE TW 14AWG & 27-TYPE TC 2/C

14AWG CONDUCTORS EVENLY DISTRIBUTED BETWEEN THE CONDUIT. ONE CONDUIT SHALL

BE LEFT EMPTY AS SPARE.”

(v) Add new Note 11 having the following text:

“11. IN ADDITION TO THE CABLES INDICATED ABOVE, THE CONTRACTOR SHALL INSTALL

ALL NECESSARY CABLING BETWEEN THE CENTRAL CONTROL PLC LOCATED WITHIN THE

Am #0002 - 5

SERVICE BUILDING AND THE BLOWER AND JET MOTIVE CONTROL PANEL W/ HMI LOCATED

WITHIN THE MECHANICAL BUILDING TO ALLOW THE TWO PLC'S TO COMMUNICATE.

CABLING SHALL BE PER MANUFACTURER'S RECOMMENDATION.”

(9) Sheet CU101OD, OXIDATION DITCH PROCESS LAYOUT

Add to note 3: See sheet S-100OD for additional requirements.

(10) Sheet CU502OD, OXIDATION DITCH

Detail 1 – OVERFLOW & EFFLUENT WEIRS SECTION VIEW – change elevation of Center of the shaft from 842’-6” to 842’-9”

(11) Sheet S-500OD, OXIDATION DITCH – STRUCTURAL SECTIONS

Detail 1 – SECTION AT DISC AERATORS – change elevation of Center of the shaft from 842’-6” to 842’-9”

(12) Sheet S-501OD, OXIDATION DITCH – STRUCTURAL SECTIONS

Detail 3 – SECTION AT OVER-FLOW WEIRS – change elevation of Center of the shaft from 842’-6” to 842’-9”

(13) Sheet S-502OD, OXIDATION DITCH STRUCTURAL DETAILS

Replace the “2 in” reference with “1 - 1/2 in” in Guardrail Notes no. 3.

(14) Sheet CD101FC, FINAL CLARIFIER EQUIPMENT REMOVAL

Add the following note 4 to NOTES:

“4. The Contractor shall be responsible for the temporary removal of the existing cover of one of the existing Final clarifier while installing the new equipment. The intent is to install the same cover back. The integrity of the cover shall be protected.”

(15) Sheet CD102FC, FINAL CLARIFIER REMOVAL SECTIONS

Add the following note 4 to NOTES:

“4. The Contractor shall be responsible for the temporary removal of the

(16) Sheet CU101FC, FINAL CLARIFIER PROCESS PLANS

Add the following notes 4 & 5 to NOTES:

“4. This drawing may not be representative of the manufacturer design to comply with the requirements contained in the specs. Not all the details and features required for the new clarifier rapid sludge collector removal equipment are indicated on this drawing. Note that the intent is to provide half bridge as shown in sheet CU102FC and as indicated on the specs. Refer to specs 46 43 21 for additional equipment requirements.”

“5. The Contractor shall be responsible for the temporary removal of the

Am #0002 - 6

(17) Sheet CU102FC, FINAL CLARIFIER SECTIONS

Add the following notes 5 and 6 to NOTES:

“5. This drawing may not be representative of the manufacturer design to comply with the requirements contained in the specs. Not all the details and features required for the new clarifier rapid sludge collector removal equipment are indicated on this drawing. Refer to specs 46 43 21 for additional equipment requirements.”

“6. The Contractor shall be responsible for the temporary removal of the existing cover of one of the existing Final clarifier while installing the

(18) Sheet T-101PB, PUMP/BLOWER BUILDING TELECOMMINICATIONS PLAN – 1ST FLOOR

(i) Add new General Note 10 with the following text:

“10. THE POSITION OF THE BLOWER HOA SWITCHES ON THE EXISTING BLOWER

AND JET MOTIVE CONTROL PANEL LOCATED WITHIN THE MECHANICAL BUILDING

SHALL BE DISPLAYED ON THE NEW BLOWER PLC. REFER TO SHEET EP101MB FOR

ADDITIONAL INFORMATION”

(ii) Add new General Note 11 with the following text:

“11. THE POSITION OF THE BLOWER HOA SWITCHES ON THE NEW BLOWER PLC

SHALL BE DISPLAYED ON THE CENTRAL CONTROL PLC HMI LOCATED WITHIN THE

SERVICE BUILDING.”

(19) Sheet CU700SC, SOLIDS CONTACT TANK

(i) Add before NOTES - “This drawing and all NOTES refer to SOLIDS

CONTACT TANK SOUTH (STRUCTURE 40) ONLY”

(ii) Add to the title of Detail 1 – SOLIDS CONTACT TANK “SOUTH (STRUCTURE

40” PLAN

(20) Sheet EP101MB, MECHANICAL BUILDING POWER PLAN

(i) Replace Keyed Note 2 text with the following:

“THE EXISTING BLOWER AND JET MOTIVE CONTROL PANEL SHALL TIE INTO THE

NEW CENTRAL CONTROL PLC LOCATED WITHIN ROOM 103 OF THE SERVICE

BUILDING. ACCESS TO ALL FUNCTIONS OF THE EXISTING BLOWER AND JET

MOTIVE CONTROL PANEL, INCLUDING ALL METER/SENSOR READINGS AND

CONTROL SET POINTS, SHALL BE AVAILABLE FROM THE CENTRAL CONTROL PLC.

THE CONTRACTOR SHALL PROVIDE AND INSTALL ANY NEW DEVICES REQUIRED

TO TIE THE EXISTING CONTROL PANEL TO THE NEW CENTRAL CONTROL PLC.”

(ii) Replace Keyed Note 3 text with the following:

“ANY CONTROL POINTS MANUALLY ENTERED INTO THE EXISTING BLOWER AND

JET MOTIVE CONTROL PANEL SHALL AUTOMATICALLY UPDATE THE

CORRESPONDING VALUES STORED IN THE CENTRAL CONTROL PLC. LIKEWISE,

Am #0002 - 7

ANY CONTROL POINTS MANUALLY ENTERED IN THE CENTRAL CONTROL PLC SHALL

AUTOMATICALLY UPDATE THE CORRESPONDING VALUES STORED IN THE EXISTING

BLOWER AND JET MOTIVE CONTROL PANEL.”

(iii) Add new General Note 3 text with the following:

“3. ALL EXISTING FUNCTIONS OF THE EXISTING BLOWER AND JET MOTIVE

CONTROL PANEL SHALL REMAIN IN PLACE AND FUNCTIONAL.”

(iv) Add new General Note 4 text with the following:

“4. THE CONTRACTOR SHALL REPROGRAM THE EXISTING BLOWER AND JET MOTIVE

CONTROL PANEL AS NECESSARY TO FACILITATE THE INTERFACE TO THE NEW

CENTRAL CONTROL PLC. THE BLOWER AND JET MOTIVE CONTROL PANEL HMI

AND BLOWER CONTROL POINTS SHALL BE REPROGRAMMED AS INDICATED ON

SHEET T-101PB, GENERAL NOTES 4, 6, AND 7.”

(v) Add new General Note 5 text with the following:

“5. AS AN ALTERNATIVE TO REUSING THE EXISTING CONTROL PANEL, AT THE

CONTRACTOR’S DISCRESSION THE EXISTING BLOWER AND JET MOTIVE CONTROL

PANEL MAY BE REPLACED WITH A NEW PLC. THE NEW BLOWER AND JET MOTIVE

CONTROL PANEL SHALL DUPLICATE ALL FUNCTIONS OF THE EXISTING CONTROL

PANEL AND BE FULLY COMPATIBLE WITH THE CENTRAL CONTROL PLC LOCATED

WITHIN THE SERVICE BUILDING. THE NEW BLOWER AND JET MOTIVE CONTROL

PANEL MUST ALSO MEET THE REQUIREMENTS OF GENERAL NOTE 4.”

(vi) Add new General Note 6 with the following text:

“6. THE POSITION OF THE BLOWER HOA SWITCHES ON THE NEW BLOWER PLC

LOCATED WITHIN THE PUMP/BLOWER BUILDING SHALL BE DISPLAYED ON THE

NEW BLOWER PLC. REFER TO SHEET T-101PB FOR ADDITIONAL INFORMATION.”

(vii) Add new General Note 7 with the following text:

“7. THE POSITION OF THE BLOWER HOA SWITCHES ON THE EXISTING BLOWER

AND JET MOTIVE CONTROL PANEL SHALL BE DISPLAYED ON THE CENTRAL

CONTROL PLC HMI LOCATED WITHIN THE SERVICE BUILDING.”

(21) Sheet EI501SB, SERVICE BUILDING TERMINAL BLOCK CONNECTIONS

In the CENTRAL CONTTROL PLC TERMINAL BLOCK CONNECTIONS, delete the DO-1, DO-2, LS-1 and LS-2 inputs from TB-1-IN.

(22) Sheet EI601SB, SERVICE BUILDING CONTROL DIAGRAMS

(i) In the CONTROL SYSTEM BLOCK DIAGRAM, add a fourth set of PLC CPU and

I/O RACK identical to what is currently shown for the BLOWER PLC and AERATOR CONTROL PLC. The new PLC CPU and I/O RACK shall be half-toned to indicate that it is existing equipment. The new PLC CPU and I/O RACK shall be titled “EXISTING BLOWER AND JET MOTIVE CONTROL

PANEL W/ HMI (LOCATED IN MECHANICAL BUILDING)”

(ii) In the CONTROL SYSTEM BLOCK DIAGRAM, add new line work from the

EXISTING BLOWER AND JET MOTIVE CONTROL PANEL W/ HMI PLC CPU-CPU

MODULE to the CENTRAL CONTROL PLC PLC CPU-COMMUNICATION MODULE. Add new line work from the EXISTING BLOWER AND JET MOTIVE CONTROL PANEL W/ HMI I/O RACK-COMMUNICATION MODULE to the CENTRAL CONTROL PLC I/O

Am #0002 - 8

RACK-COMMUNICATION MODULE. The new line shall be full-tone to indicate new cabling.

(iii) In the CONTROL SYSTEM BLOCK DIAGRAM, add two additional leaders to the “AS REQUIRED BY PLC MANUFACTURER” leader note.

(23) Sheet EI602SB, SERVICE BUILDING CONTROL SYSTEM I/O

(i) Replace General Note 1 text with the following:

“1. THE EXISTING PLC CONTROLLER (BLOWER AND JET MOTIVE CONTROL PANEL

W/ HMI) LOCATED WITHIN THE MECHANICAL BUILDING SHALL BE REPROGRAMMED

TO RETRANSMIT ALL INPUT AND OUTPUT SIGNALS FROM THE DIGESTERS

(EXISTING DISOLVED OXYGEN SENSORS, ULTRASONIC LEVEL SENSORS, AND JET

MOTIVE PUMPS) TO THE NEW CENTRAL CONTROL PLC. REFER TO SHEET EP101MB

FOR ADDITIONAL INFORMATION”

(ii) Delete General Notes 3 and 4.

(iii) Renumber General Notes 5 and 6 as 3 and 4 respectively.

(iv) In the Mechanical Building portion of the Control System I/O Riser, delete the leader note “SPLICE NEW CABLES TO EXISTING” which is pointing to the Existing DO-1 and DO-2 lines.

(v) In the Mechanical Building portion of the Control System I/O Riser, delete the leader note “INSTALL NEW 4-20mA SIGNAL SPLITTER IN LINE WITH EXISTING SIGNAL WIRING.” which is pointing to the Existing LS- 1 and LS-2 lines.

(vi) In the Mechanical Building portion of the Control System I/O Riser, delete ‘New’ line work showing the split LS-1 and LS-2 signals being individually retransmitted to the PLC in the Service Building.

(vii) In the Mechanical Building portion of the Control System I/O Riser, change the Dissolved Oxygen Level ‘AI’ line work to existing and move to show them as Local Control

(24) Sheet T-101SB, SERVICE BUILDING TELECOMMUNICATIONS

(i) Replace the “Existing Control PLC” reference with "Dialer and Remote

Monitoring/Alarm Cabinet".

(ii) Add new General Note 6 with the following text:

“6. NEW CENTRAL CONTROL PLC SHALL BE FULLY COMPATIBLE WITH ALL OTHER PLC’S

TO BE INTERFACED WITH, REFER TO SHEET EI601SB AND SPECIFICATION SECTION 40

95 00 FOR ADDITIONAL INFORMATION.”

(25) Sheet S-100SR, SEPTAGE RECEIVING STATION PLAN VIEWS

Add new subparagraph “E” under Notes 4 “For Floor Access Doors Notes”.

New note: “E. See specification Section 05 50 13 for additional requirements.

(26) Sheet S-500SR, SEPTAGE RECEIVING STATION SECTION & DETAILS

Am #0002 - 9

Replace the specification section “09 90 00” reference with "07 13 53” to Note 2.

(27) Sheet S-001, STRUCTURAL NOTES

Add the word “Outriggers” to note 4 from “H. Steel Truss and Framing Notes”.

Revised note: “4. Contractor design shall provide bracing, bridging, outriggers, splices as required.”

2. This amendment is a part of the proposing papers and its receipt shall be acknowledged. All other conditions and requirements of the request for proposal remain unchanged.

3. Electronic Proposals. Provide proposals via the instructions provided in Section 00 22 00 of the Request for Proposal.

4. Offers will be received until 2:00 p.m., local time at place of receiving proposals, 30 JUL 2020.

Attachments:

Section 00 10 00 – SF1442 and CLIN Pricing Schedule General Wage Rate Decisions WI20200008 dated 07/24/2020 WI20200011 dated 07/24/2020 Specifications listed in 1.b., above

U.S. Army Corps of Engineers, Omaha District 1616 Capitol Avenue Omaha, Nebraska 68102-4901

24 JUL 2020

nep/2160

This page was intentionally left blank for duplex printing.

Am #0002 00 10 00SF-1442 -Page 1

SOLICITATION, OFFER

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

W9128F-20-R-0082

2. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

3. DATE ISSUED

23 JUN 2020

PAGES OF PAGES

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NO. 5. REQUISITION/PURCHASE REQUEST NO.

6. PROJECT NO.

7. ISSUED BY CODE CT 8. ADDRESS OFFER TO

U.S.ARMY CORPS OF ENGINEERS, OMAHA

Rocky Mountain Area Office Attn: CONTRACTING DIVISION (CENWO-CT-M) 5475 Tech Center Drive, Suite 205 Colorado Springs, CO 80919

See Block 7

9. FOR INFORMATION

CALL:

A. NAME

Phil Wickham

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS) Use Email: Phillip.L.Wickham@usace.army.mil

SOLICITATION

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying no., date):

The offeror hereby agrees to do all work described in the documents entitled:

WASTE WATER TREATMENT PLANT ALTERATION

PN 97448, (FY20)

FORT MCCOY, WISCONSIN

RETURN WITH OFFER: INFORMATION REQUIRED BY SECTION 00 10 00 (SF1442), SECTION 00 22 00, AND SECTION 00 45 00.

*BLOCK 13A. – REFER TO SECTION 00 22 00 FOR THE NUMBER OF COPIES TO BE SUBMITTED WITH THE ORIGINAL OFFER.

THIS SOLICITATION IS UNRESTRICTED.

11. The Contractor shall begin performance within 10 calendar days and complete it within ** calendar days after receiving award, notice to proceed. This performance period is mandatory, negotiable. **See Section 00 73 00

12A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

YES NO

12B. CALENDAR DAYS

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and * copies to perform the work required are due at the place specified in Item 8 by 1400 (hour) local time 30 JUL 2020. If this is a sealed bid solicitation, offers must be publicly opened at that time. Sealed envelopes containing offers shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

B. An offer guarantee is is not required.

C. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than ___60___ calendar days for Government acceptance after the date offers are due will not be considered and will be rejected.

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442(REV. 4-85)

Prescribed by GSA FAR(48 CFR) 53.236-1(e)

Am #0002 00 10 00SF-1442 -Page 2

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code) 15. TELEPHONE NO. (Include area code)

DUNS Number:

16. REMITTANCE ADDRESS (Include only if different than Item 14)

CODE FACILITY CODE

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Government in writing within 60 calendar days after the date offers are due.

AMOUNTS

SEE ATTACHED CLIN PRICING SCHEDULE

Contractor’s Fax No. CAGE CODE Contractor’s E-Mail address

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation - give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER

(Type or print)

20B. SIGNATURE 20C. OFFER DATE

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) ( ) 41 U.S.C. 253(c) ( )

26. ADMINISTERED BY CODE 27. PAYMENT WILL BE MADE BY

U.S. Army Engineer District, Omaha 1616 Capitol Ave.

Omaha, Nebraska 68102-4901

USAED Omaha c/o USACE Finance Center 5722 Integrity Drive Millington, TN 38054-5005

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

28. NEGOTIATED AGREEMENT (contractor is required to sign this document and return _______ copies to issuing office.) Contractor agrees to furnish and deliver all items or perform all work, requisitions identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award,

(b) the solicitation, and (c) the clauses, representations, certifications, and specifications incorporated by reference in or attached to this contract.

29. AWARD (Contractor is not required to sign this document.) Your offer on this solicitation, is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Government solicitation and your offer, and (b) this contract award. No further contractual document is necessary.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED

TO SIGN (Type or print)

31A. NAME OF CONTRACTING OFFICER (Type or print)

30B. SIGNATURE 30C. DATE 31B. UNITED STATES OF AMERICA

BY

31C. AWARD DATE

STANDARD FORM 1442 BACK (REV. 4-85)

CLIN SCHEDULE 00 10 00 - 3 W9128F-20-R-0082

Am #0002

CONTRACT LINE ITEM (CLIN) PRICING SCHEDULE

ITEM

NO.

DESCRIPTION QTY UNIT UNIT

PRICE

AMOUNT

BASIC ITEMS

All ‘minor construction’ related work complete to construct Waste Water Treatment Plant at Fort McCoy, Wisconsin to include abandoning in place one (1) existing Primary Clarifier Tank & connected inlet box structure, two (2) Trickling Filters, Inlet structure to Solid Contact Tanks, and both (2) Solid Contact Tanks and all the piping/equipment within the structures.

Job

XXX

TOTAL BASIC AMOUNT $_____________________________

OPTION ITEMS

[Option]

All ‘minor construction’ related work complete for structure demolition as identified in project demolition drawing to include one

(1) existing Primary Clarifier Tank & connected inlet box structure, two

(2) Trickling Filters, Inlet structure to Solid Contact Tanks, and one (1) Solid Contact Tank.

Job

XXX

TOTAL AMOUNT ( BASIC PLUS OPTIONS) $___________________________

NOTES:

1. See 00 21 00, INSTRUCTIONS, CONDITIONS, & NOTICES TO OFFERORS for evaluation of options.

The Government reserves the right to exercise the options within 90 calendar days after issuance of Notice to Proceed.

2. Prices must be entered for all items of the schedule. Total amounts submitted without prices being entered on individual items will be rejected. In case of variation between the lump-sum prices and the total amount, the lump-sum prices will be considered the price submitted.

3. A modification to a proposal which provides for a single adjustment to the total amounts, should state the application of the adjustment to each respective lump-sum price and unit price affected. If the modification is not so apportioned, the single adjustment will be applied to Item No. 0001.

Am #0002 WI20200008 - 1 07/24/2020

General Decision Number: WI20200008 07/24/2020

Superseded General Decision Number: WI20190008

State: Wisconsin

Construction Types: Heavy (Sewer and Water Line and Tunnel)

Counties: Wisconsin Statewide.

TUNNEL, SEWER & WATER LINE CONSTRUCTION PROJECTS

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2020. If this contract is covered by the EO and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must pay workers in that classification at least the wage rate determined through the conformance process set forth in 29 CFR 5.5(a)(1)(ii) (or the EO minimum wage rate,if it is higher than the conformed wage rate). The EO minimum wage rate will be adjusted annually. Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/03/2020 1 01/24/2020 2 02/28/2020 3 03/06/2020 4 06/05/2020 5 06/12/2020 6 06/19/2020 7 07/17/2020 8 07/24/2020

Am #0002 WI20200008 - 2 07/24/2020

BRWI0001-002 06/03/2019

CRAWFORD, JACKSON, JUNEAU, LA CROSSE, MONROE, TREMPEALEAU, AND

VERNON COUNTIES

Rates Fringes

BRICKLAYER.......................$ 33.80 24.28

BRWI0002-002 06/01/2019

ASHLAND, BAYFIELD, DOUGLAS, AND IRON COUNTIES

Rates Fringes

BRICKLAYER.......................$ 39.94 23.30

BRWI0002-005 06/01/2019

ADAMS, ASHLAND, BARRON, BROWN, BURNETT, CALUMET, CHIPPEWA,

CLARK, COLUMBIA, DODGE, DOOR, DUNN, FLORENCE, FOND DU LAC,

FOREST, GREEN LAKE, IRON, JEFFERSON, KEWAUNEE, LANGLADE,

LINCOLN, MANITOWOC, MARATHON, MARINETTE, MARQUETTE, MENOMINEE,

OCONTO, ONEIDA, OUTAGAMIE, POLK, PORTAGE, RUSK, ST CROIX, SAUK,

SHAWANO, SHEBOYGAN, TAYLOR, VILAS, WALWORTH, WAUPACA, WAUSHARA,

WINNEBAGO, AND WOOD COUNTIES

CEMENT MASON/CONCRETE FINISHER...$ 35.51 23.37

BRWI0003-002 06/03/2019

BROWN, DOOR, FLORENCE, KEWAUNEE, MARINETTE, AND OCONTO COUNTIES

Rates Fringes

BRICKLAYER.......................$ 34.18 23.90

BRWI0004-002 06/01/2019

KENOSHA, RACINE, AND WALWORTH COUNTIES

Rates Fringes

BRICKLAYER.......................$ 38.43 25.10

BRWI0006-002 06/01/2019

ADAMS, CLARK, FOREST, LANGLADE, LINCOLN, MARATHON, MENOMINEE,

ONEIDA, PORTAGE, PRICE, TAYLOR, VILAS AND WOOD COUNTIES

Am #0002 WI20200008 - 3 07/24/2020

BRICKLAYER.......................$ 35.06 23.02

BRWI0007-002 06/03/2019

GREEN, LAFAYETTE, AND ROCK COUNTIES

Rates Fringes

BRICKLAYER.......................$ 35.57 24.22

BRWI0008-002 06/01/2019

MILWAUKEE, OZAUKEE, WASHINGTON, AND WAUKESHA COUNTIES

Rates Fringes

BRICKLAYER.......................$ 38.93 24.22

BRWI0009-001 06/03/2019

GREEN LAKE, MARQUETTE, OUTAGAMIE, SHAWANO, WAUPACA, WASHARA,

AND WINNEBAGO COUNTIES

BRICKLAYER.......................$ 34.18 23.90

BRWI0011-002 06/03/2019

CALUMET, FOND DU LAC, MANITOWOC, AND SHEBOYGAN COUNTIES

Rates Fringes

BRICKLAYER.......................$ 34.18 23.90

BRWI0013-002 06/03/2019

DANE, GRANT, IOWA, AND RICHLAND COUNTIES

Rates Fringes

BRICKLAYER.......................$ 35.56 24.23

BRWI0019-002 06/03/2019

BARRON, BUFFALO, BURNETT, CHIPPEWA, DUNN, EAU CLAIRE, PEPIN,

PIERCE, POLK, RUSK, ST. CROIX, SAWYER AND WASHBURN COUNTIES

Am #0002 WI20200008 - 4 07/24/2020

BRICKLAYER.......................$ 33.40 24.68

BRWI0021-002 06/03/2019

DODGE AND JEFFERSON COUNTIES

Rates Fringes

BRICKLAYER.......................$ 35.75 24.02

BRWI0034-002 06/03/2019

COLUMBIA AND SAUK COUNTIES

Rates Fringes

BRICKLAYER.......................$ 35.56 24.23

CARP0087-001 05/01/2016

BURNETT (W. of Hwy 48), PIERCE (W. of Hwy 29), POLK (W. of Hwys 35, 48 & 65), AND ST. CROIX (W. of Hwy 65) COUNTIES

Carpenter & Piledrivermen........$ 36.85 18.39

CARP0252-002 06/01/2016

ADAMS, BARRON, BAYFIELD (Eastern 2/3), BROWN, BUFFALO, BURNETT (E. of Hwy 48), CALUMET, CHIPPEWA, CLARK, COLUMBIA, CRAWFORD, DANE, DODGE, DOOR, DUNN, EAU CLAIRE, FLORENCE (except area bordering Michigan State Line), FOND DU LAC, FOREST, GRANT, GREEN, GREEN LAKE, IOWA, IRON, JACKSON, JEFFERSON, JUNEAU, KEWAUNEE, LA CROSSE, LAFAYETTE, LANGLADE, LINCOLN, MANITOWOC, MARATHON, MARINETTE (except N.E. corner), MARQUETTE, MENOMINEE, MONROE, OCONTO, ONEIDA, OUTAGAMIE, PEPIN, PIERCE (E.

of Hwys 29 & 65), POLK (E. of Hwys 35, 48 & 65), PORTAGE, PRICE, RICHLAND, ROCK, RUSK, SAUK, SAWYER, SHAWANO, SHEBOYGAN, ST CROIX (E. of Hwy 65), TAYLOR, TREMPEALEAU, VERNON, VILAS, WALWORTH, WASHBURN, WAUPACA, WAUSHARA, WINNEBAGO, AND WOOD

COUNTIES

CARPENTER

CARPENTER...................$ 33.56 18.00

MILLWRIGHT..................$ 35.08 18.35

PILEDRIVER..................$ 34.12 18.00

CARP0252-010 06/01/2016

Am #0002 WI20200008 - 5 07/24/2020

ASHLAND COUNTY

Carpenters Carpenter...................$ 33.56 18.00 Millwright..................$ 35.08 18.35 Pile Driver.................$ 34.12 18.00

CARP0264-003 06/01/2016

KENOSHA, MILWAUKEE, OZAUKEE, RACINE, WAUKESHA, AND WASHINGTON

CARPENTER........................$ 35.78 22.11

CARP0361-004 05/01/2018

BAYFIELD (West of Hwy 63) AND DOUGLAS COUNTIES

Rates Fringes

CARPENTER........................$ 36.15 20.43

CARP2337-001 06/01/2016

ZONE A: MILWAUKEE, OZAUKEE, WAUKESHA AND WASHINGTON

ZONE B: KENOSHA & RACINE

PILEDRIVERMAN

Zone A......................$ 31.03 22.69 Zone B......................$ 31.03 22.69

CARP2337-003 06/01/2019

Rates Fringes

MILLWRIGHT

Zone A......................$ 33.58 21.53 Zone B......................$ 33.58 21.53

ZONE DEFINITIONS

ZONE A: MILWAUKEE, OZAUKEE, WAUKESHA AND WASHINGTON COUNTIES

ZONE B: KENOSHA & RACINE COUNTIES

Am #0002 WI20200008 - 6 07/24/2020

ELEC0014-002 06/03/2019

ASHLAND, BARRON, BAYFIELD, BUFFALO, BURNETT, CHIPPEWA, CLARK

(except Maryville, Colby, Unity, Sherman, Fremont, Lynn & Sherwood), CRAWFORD, DUNN, EAU CLAIRE, GRANT, IRON, JACKSON, LA

CROSSE, MONROE, PEPIN, PIERCE, POLK, PRICE, RICHLAND, RUSK, ST

CROIX, SAWYER, TAYLOR, TREMPEALEAU, VERNON, AND WASHBURN

Electricians:....................$ 35.59 20.87

ELEC0127-002 06/01/2020

KENOSHA COUNTY

Rates Fringes

Electricians:....................$ 41.62 30%+12.70

ELEC0158-002 06/03/2019

BROWN, DOOR, KEWAUNEE, MANITOWOC (except Schleswig), MARINETTE(Wausuakee and area South thereof), OCONTO, MENOMINEE (East of a ine 6 miles West of the West boundary of Oconto County), SHAWANO (Except Area North of Townships of Aniwa and Hutchins) COUNTIES

Electricians:....................$ 33.52 29.75%+10.26

ELEC0159-003 06/01/2019

COLUMBIA, DANE, DODGE (Area West of Hwy 26, except Chester and Emmet Townships), GREEN, LAKE (except Townships of Berlin, Seneca, and St. Marie), IOWA, MARQUETTE (except Townships of Neshkoka, Crystal Lake, Newton, and Springfield), and SAUK

Electricians:....................$ 40.30 22.24

ELEC0219-004 06/01/2016

FLORENCE COUNTY (Townships of Aurora, Commonwealth, Fern, Florence and Homestead) AND MARINETTE COUNTY (Township of

Am #0002 WI20200008 - 7 07/24/2020

Niagara)

Electricians:

Electrical contracts over $180,000....................$ 32.38 18.63 Electrical contracts under $180,000....................$ 30.18 18.42

ELEC0242-005 05/16/2018

DOUGLAS COUNTY

Rates Fringes

Electricians:....................$ 36.85 26.17

ELEC0388-002 06/03/2019

ADAMS, CLARK (Colby, Freemont, Lynn, Mayville, Sherman, Sherwood, Unity), FOREST, JUNEAU, LANGLADE, LINCOLN, MARATHON, MARINETTE (Beecher, Dunbar, Goodman & Pembine), MENOMINEE (Area West of a line 6 miles West of the West boundary of Oconto County), ONEIDA, PORTAGE, SHAWANO (Aniwa and Hutchins), VILAS

AND WOOD COUNTIES

Electricians:....................$ 33.56 26%+11.01

ELEC0430-002 06/01/2020

RACINE COUNTY (Except Burlington Township)

Rates Fringes

Electricians:....................$ 41.86 22.66

ELEC0494-005 06/01/2020

MILWAUKEE, OZAUKEE, WASHINGTON, AND WAUKESHA COUNTIES

Rates Fringes

Electricians:....................$ 42.84 25.54

ELEC0494-006 06/01/2020

CALUMET (Township of New Holstein), DODGE (East of Hwy 26 including Chester Township), FOND DU LAC, MANITOWOC (Schleswig), and SHEBOYGAN COUNTIES

Am #0002 WI20200008 - 8 07/24/2020

Electricians:....................$ 36.32 22.51

ELEC0577-003 06/01/2019

CALUMET (except Township of New Holstein), GREEN LAKE (N. part including Townships of Berlin, St Marie, and Seneca), MARQUETTE (N. part including Townships of Crystal Lake, Neshkoro, Newton, and Springfield), OUTAGAMIE, WAUPACA, WAUSHARA, AND WINNEBAGO

Electricians:....................$ 33.15 28.50%+10.00

ELEC0890-003 06/01/2020

DODGE (Emmet Township only), GREEN, JEFFERSON, LAFAYETTE, RACINE (Burlington Township), ROCK AND WALWORTH COUNTIES

Electricians:....................$ 37.41 25.95%+11.11

* ENGI0139-003 06/01/2020

REMAINING COUNTIES

Rates Fringes

Power Equipment Operator Group 1.....................$ 42.92 23.15 Group 2.....................$ 41.67 23.15 Group 3.....................$ 39.97 23.15 Group 4.....................$ 39.44 23.15 Group 5.....................$ 37.37 23.15 Group 6.....................$ 35.84 23.15

HAZARDOUS WASTE PREMIUMS:

EPA Level ""A"" Protection: $3.00 per hour EPA Level ""B"" Protection: $2.00 per hour EPA Level ""C"" Protection: $1.00 per hour

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Cranes, Tower Cranes and Derricks with or without attachments with a lifting capacity of over 100 tons;

Cranes, Tower Cranes, and Derricks with boom, leads and/or jib lengths 176 ft or longer.

Am #0002 WI20200008 - 9 07/24/2020

GROUP 2: Backhoes (Excavators) weighing 130,00 lbs and over;

Cranes, Tower Cranes and Derricks with or without attachments with a lifting capacity of 100 tons or less;

Cranes, Tower Cranes, and Derricks with boom, leads, and/or jib lengths 175 ft or less; Caisson Rigs; Pile Driver

GROUP 3: Backhoes (Excavators) weighing under 130,000 lbs;

Travelling Crane (bridge type); Milling Machine; Concrete Paver over 27 E; Concrete Spreader and Distributor;

Concrete Laser Screed; Concrete Grinder and Planing Machine; Slipform Curb and Gutter Machine; Boring Machine (Directional); Dredge Operator; Skid Rigs; over 46 meter Concrete Pump.

GROUP 4: Hydraulic Backhoe (tractor or truck mounted);

Hydraulic Crane, 10 tons or less; Tractor, Bulldozer, or End Loader (over 40 hp); Motor Patrol; Scraper Operator;

Bituminous Plant and Paver Operator; Screed-Milling Machine; Roller over 5 tons; Concrete pumps 46 meter and under; Grout Pumps; Rotec type machine; Hydro Blaster, 10,000 psi and over; Rotary Drill Operator; Percussion Drilling Machine; Air Track Drill with or without integral hammer; Blaster; Boring Machine (vertical or horizontal);

Side Boom; Trencher, wheel type or chain type having 8 inch or larger bucket; Rail Leveling Machine (Railroad); Tie Placer; Tie Extractor; Tie Tamper; Stone Leveler; Straddle Carrier; Material Hoists; Stack Hoist; Man Hoists; Mechanic and Welder; Off Road Material Haulers.

GROUP 5: Tractor, Bulldozer, or Endloader (under 40 hp);

Tampers -Compactors, riding type; Stump Chipper, large;

Roller, Rubber Tire; Backfiller; Trencher, chain type (bucket under 8 inch); Concrete Auto Breaker, large;

Concrete Finishing Machine (road type); Concrete Batch Hopper; Concrete Conveyor Systems; Concrete Mixers, 14S or over; Pumps, Screw Type and Gypsum); Hydrohammers, small;

Brooms and Sweeeprs; Lift Slab Machine; Roller under 5 tons; Industrial Locomotives; Fireman (Pile Drivers and Derricks); Pumps (well points); Hoists, automatic; A-Frames and Winch Trucks; Hoists (tuggers); Boats (Tug, Safety, Work Barges and Launches); Assistant Engineer

GROUP 6: Shouldering Machine Operator; Farm or Industrial Tractor mounted equipment; Post Hole Digger; Auger (vertical and horizontal); Skid Steer Loader with or without attachments; Robotic Tool Carrier with or without attachments; Power Pack Vibratory/Ultra Sound Driver and Extractor; Fireman (Asphalt Plants); Screed Operator; Stone Crushers and Screening Plants; Air, Electric, Hydraulic Jacks (Slip Form); Prestress Machines; Air Compressor, 400 CFM or over; Refrigeration Plant/Freese Machine; Boiler Operators (temporary heat); Forklifts; Welding Machines;

Generators; Pumps over 3""; Heaters, Mechanical; Combination

Am #0002 WI20200008 - 10 07/24/2020 small equipment operator; Winches, small electric; Oiler;

Greaser; Rotary Drill Tender; Conveyor; Elevator Operator

ENGI0139-007 06/01/2020

DODGE, FOND DU LAC, JEFFERSON, KENOSHA, MILWAUKEE, OZAUKEE,

RACINE, SHEBOYGAN, WALWORTH, WASHINGTON, AND WAUKESHA COUNTIES

Power Equipment Operator Group 1.....................$ 41.64 23.25 Group 2.....................$ 40.86 23.25 Group 3.....................$ 39.91 23.25 Group 4.....................$ 38.86 23.25 Group 5.....................$ 37.46 23.25

HAZARDOUS WASTE PREMIUMS:

EPA Level ""A"" Protection: $3.00 per hour EPA Level ""B"" Protection: $2.00 per hour EPA Level ""C"" Protection: $1.00 per hour

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Cranes, Tower Cranes, and Derricks with or without attachments, with a lifting capacity of over 100 tons; or Cranes, Tower Cranes, and Derricks with boom, leads, and/or jib lengths measuring 176 feet or longer; Backhoes (Excavators) 130,000 lbs and over; Caisson Rigs and Pile Drivers

GROUP 2: Cranes, Tower Cranes and Derricks with or without attachments with a lifting capacity of 100 tons or under;

or Cranes, Tower Cranes, and Derricks with boom, lead, and\or jib lengths measuring 175 feet or under; Backhoes (Excavators) under 130,000 lbs; Skid Rigs; Dredge Operator:

Traveling Crane (Bridge type); Concrete Paver over 27 E;

Concrete Spreader and Distributor; Concrete Pumps and Boring Machines (directional)

GROUP 3: Material Hoists; Stack Hoists; Tractor or Truck mounted Hydraulic Backhoe; Tractor or Truck Mounted Hydraulic Crane, 5 tons or under; Manhoist; Tractor over 40 hp; Bulldozer over 40 hp; Endloader over 40 hp; Forklift, 25 ft and over; Motor Patrol; Scraper Operator; Sideboom;

Straddle Carrier; Mechanic and Welder; Bituminous Plant and Paver Operator; Roller over 5 tons; Percussion Drill Operator; Rotary Drill Operator; Blaster; Air Track Drill;

Trencher (wheel type or chain type having over 8 inch bucket); Elevator; Milling Machine and Boring Machine (horizontal or vertical); Backhoe Mounted Compactor

Am #0002 WI20200008 - 11 07/24/2020

GROUP 4: Backfiller; Concrete Auto Breaker (large); Concrete Finishing Machine (road type); Roller, Rubber Tire;

Concrete Batch Hopper; Concrete Conveyor System; Concrete Mixers (14S or over); Screw type Pumps and Gypsum Pumps;

Grout Pumps; Tractor, Bulldozer, End Loader, under 40 hp;

Pumps (well points); Trencher (chain type 8 inch or smaller bucket; Industrial Locomotives; Roller under 5 tons;

Fireman (Piledrivers and Derricks); Robotic Tool Carrier with or without attachments.

GROUP 5: Hoists (Automatic); Forklift, 12 ft to 25 ft;

Tamper-Compactors, riding type; A-Frame andWinch Trucks;

Concrete Auto Breaker; Hydrohammer, small; Brooms and Sweepers; Hoist (Tuggers); Stump Chipper, large; Boats (Tug, Safety, Work Barges and Launch); Shouldering Machine Operator; Screed Operator; Farm or Industrial Tractor; Post Hole Digger; Stone Crushers and Screening Plants; Firemen (Asphalt Plants); Air Compressor (400 CFM or over); Augers (vertical and horizontal); Generators, 150 KW and over;

Air, Electric Hydraulic Jacks (Slipform); Prestress Machines; Skid Steer Loader with or without attachments;

Boiler operators (temporary heat); Forklift, 12 ft and under; Screed Operator Milling Machine; Refrigeration Plant/Freeze Machine; Power Pack Vibratory/Ultra Sound Driver and Extractor; Generators under 150 KW; Combination small equipment operator; Compressors under 400 CFM;

Welding Machines; Heaters, Mechanical; Pumps; Winches, Small Electric; Oiler and Greaser; Conveyor; High pressure utility locating machine (daylighting machine).

IRON0008-002 06/01/2020

BROWN, CALUMET, DOOR, FOND DU LAC, KEWAUNEE, MANITOWOC,

MARINETTE, OCONTO, OUTAGAMI, SHAWANO, SHEBOYGAN, AND WINNEBAGO

COUNTIES:

IRONWORKER.......................$ 37.31 27.62

Paid Holidays: New Year's Day, Memorial Day, July 4th, Labor Day, Thanksgiving Day & Christmas Day.

IRON0008-003 06/01/2020

KENOSHA, MILWAUKEE, OZAUKEE, RACINE, WALWORTH (N.E. 2/3),

WASHINGTON, AND WAUKESHA COUNTIES

Am #0002 WI20200008 - 12 07/24/2020

IRONWORKER.......................$ 39.11 27.87

Paid Holidays: New Year's Day, Memorial Day, July 4th, Labor Day, Thanksgiving Day & Christmas Day.

IRON0383-001 06/01/2020

ADAMS, COLUMBIA, CRAWFORD, DANE, DODGE, FLORENCE, FOREST,

GRANT, GREENE, (Excluding S.E. tip), GREEN LAKE, IOWA, JEFFERSON, JUNEAU, LA CROSSE, LAFAYETTE, LANGLADE, MARATHON, MARQUETTE, MENOMINEE, MONROE, PORTAGE, RICHLAND, ROCK (Northern area, vicinity of Edgerton and Milton), SAUK, VERNON, WAUPACA, WAUSHARA, AND WOOD COUNTIES

IRONWORKER.......................$ 37.10 27.06

IRON0498-005 06/01/2019

GREEN (S.E. 1/3), ROCK (South of Edgerton and Milton), and

WALWORTH (S.W. 1/3) COUNTIES:

IRONWORKER.......................$ 40.25 40.53

IRON0512-008 06/03/2019

BARRON, BUFFALO, CHIPPEWA, CLARK, DUNN, EAU CLAIRE, JACKSON,

PEPIN, PIERCE, POLK, RUSK, ST CROIX, TAYLOR, AND TREMPEALEAU

IRONWORKER.......................$ 37.60 29.40

IRON0512-021 06/03/2019

ASHLAND, BAYFIELD, BURNETT, DOUGLAS, IRON, LINCOLN, ONEIDA,

PRICE, SAWYER, VILAS AND WASHBURN COUNTIES

IRONWORKER.......................$ 33.19 29.40

LABO0113-004 06/01/2020

MILWAUKEE, OZAUKEE, WASHINGTON, AND WAUKESHA COUNTIES

Am #0002 WI20200008 - 13 07/24/2020

Laborers: (Open Cut) Group 1.....................$ 16.38 21.08 Group 2.....................$ 18.65 21.08 Group 3.....................$ 22.19 21.08 Group 4.....................$ 31.56 21.08 Group 5.....................$ 31.70 21.08 Group 6.....................$ 31.76 21.08 Group 7.....................$ 34.77 21.08 Group 8.....................$ 37.59 21.08 Group 9.....................$ 38.23 21.08

LABORERS CLASSIFICATIONS [OPEN CUT]

GROUP 1: Yard Laborer

GROUP 2: Landscaper

GROUP 3: Flag Person

GROUP 4: Paving Laborer

GROUP 5: General Laborer on Surface; Top Man

GROUP 6: Mud Mixer

GROUP 7: Mucker; Form Stripper; Bottom Digger and Misc;

Bottom Man and Welder on Surface

GROUP 8: Concrete Manhole Builder; Caisson Worker; Miner;

Pipe Layer; Rock Driller and Joint Man; Timber Man and Concrete Brusher; Bracer in Trench Behind Machine & Tight Sheeting; Concrete Formsetter and Shoveler; Jackhammer Operator

GROUP 9: Blaster

LABO0113-005 06/01/2020

SEWER, TUNNEL & UNDERGROUND

KENOSHA AND RACINE COUNTIES

Rates Fringes

Laborers:

Group 1.....................$ 23.05 21.08 Group 2.....................$ 28.98 21.08 Group 3.....................$ 32.34 21.08 Group 4.....................$ 34.11 21.08

Am #0002 WI20200008 - 14 07/24/2020

TUNNEL WORK UNDER COMPRESSED AIR: 0-15 lbs add $1.00, 15-30 lbs add $2.00, over 30 lbs add $3.00

LABORERS CLASSIFICATIONS

GROUP 1: Flagperson

GROUP 2: Top Man, General Laborer, Wellpoint Installation, Wire Mesh and Reinforcement, Concrete Worker, Form Stripper, Strike-off Work

GROUP 3: Machine and Equipment Operator, Sheeting, Form Setting, Patch Finisher, Bottom Man, Joint Sawer, Gunnite Man, Manhole Builder, Welder-Torchman, Blaster, Caulker, Bracer, Bull Float, Conduit Worker, Mucker and Car Pusher, Raker and Luteman, Hydraulic Jacking of Shields, Shield Drivers, Mining Machine, Lock Tenders, Mucking Machine Operator, Motor Men & Gauge Tenders and operation of incidental Mechanical Equipment and all Power Driven Tools

GROUP 4: Pipelayer, Miner and Laser Operator

LABO0113-008 06/01/2020

MILWAUKEE, OZAUKEE, WASHINGTON & WAUKESHA COUNTIES

Rates Fringes

Laborers: (Tunnel-Free Air) Group 1.....................$ 22.19 21.08 Group 2.....................$ 31.70 21.08 Group 3.....................$ 31.76 21.08 Group 4.....................$ 34.77 21.08 Group 5.....................$ 34.91 21.08 Group 6.....................$ 37.59 21.08 Group 7.....................$ 38.23 21.08

LABORERS CLASSIFICATIONS [TUNNEL - FREE AIR]:

GROUP 1: Flagperson

GROUP 2: General Laborer on surface; Tower Man

GROUP 3: Saw Man; Top Man

GROUP 4: Form Stripper; Car Pusher

GROUP 5: Mucker; Dinkey; Welder (rate on surface)

GROUP 6: Concrete Manhole Builder; Mucking Machine; Miner;

Mining Machine; Welder; Rock Driller; Concrete Buster; Jack Hammer Operator; Caisson Worker; Pipelayer and Joint Man;

Am #0002 WI20200008 - 15 07/24/2020

Bracerman

GROUP 7: Blaster

* LABO0113-009 06/01/2020

MILWAUKEE, OZAUKEE, WASHINGTON & WAUKESHA COUNTIES

Rates Fringes

Laborers: (Tunnel - *COMPRESSED AIR 0 - 15 lbs.)

Group 1.....................$ 22.19 21.08 Group 2.....................$ 31.70 21.08 Group 3.....................$ 35.31 21.08 Group 4.....................$ 36.11 21.08 Group 5.....................$ 36.23 21.08 Group 6.....................$ 38.93 21.08 Group 7.....................$ 39.55 21.08

LABORERS CLASSIFICATIONS [TUNNEL - COMPRESSED AIR]:

*Compressed Air 15 - 30 lbs add $2.00 to all classifications *Compressed Air over 30 lbs add $3.00 to all classifcations

GROUP 2: General Laborer on surface

GROUP 3: Lock Tender on surface

GROUP 4: Form Stripper; Car Pusher

GROUP 5: Mucker; Dinkey

GROUP 6: Mucking Machine; Miner; Mining Machine; Welder & Rock Driller; Lock Tender in tunnel; Concrete Buster; Jack Hammer Operator; Caisson Worker; Pielayer and Joint Man;

Bracerman; Nozzle Man on Gunite; Timber Man; Concrete Brusher

GROUP 7: Blaster

NOTE: Hazardous & Toxic Waste Removal: add $0.15 per hour.

LABO0140-005 06/01/2020

ADAMS, ASHLAND, BARRON, BROWN, BUFFALO, CALUMET, CHIPPEWA,

CLARK, COLUMBIA, CRAWFORD, DODGE, DOOR, DUNN, EAU CLAIRE,

FLORENCE,FOND DU LAC, FOREST, GRANT, GREEN, GREEN LAKE, IOWA,

JACKSON, JEFFERSON, JUNEAU, LACROSSE, LAFAYETTE, LANGLADE,

Am #0002 WI20200008 - 16 07/24/2020

LINCOLN, MANITOWOC, MARATHON, MARINETTE, MARQUETTE, MENOMINEE,

MONROE, OCONTO, ONEIDA, OUTAGAMIE, PEPIN, PIERCE, POLK,

PORTAGE, PRICE, RICHLAND, ROCK, RUSK, ST CROIX, SAUK, SAWYER,

SHAWANO, SHEBOYGAN, TAYLOR, TREMMPEALEAU, VERNON, VILAS,

WALWWORTH, WASHBURN, WAUPACA, WAUSHARA, WINNEBAGO, AND WOOD

LABORER (SEWER & WATER)

Group 1.....................$ 29.33 17.88 Group 2.....................$ 31.18 17.88 Group 3.....................$ 31.48 17.88 Group 4.....................$ 32.13 17.88

FOR ALL TUNNEL WORK UNDER COMPRESSED AIR: 0-15 lbs add $1.00, 15-30 lbs add $2.00, over 30 lbs add $3.00

LABORER CLASSIFICATIONS:

GROUP 1: Flagperson

GROUP 2: General Laborer, Wellpoint Installation; Form Stripper; Strike Off worker

GROUP 3: Sheeting Formsetting; Patch…