I.A.02_Specifications_MHPO_Patrol_Boat.pdf

SPECIFICATIONS

ACQUISITION OF PATROL BOAT

MOUNTAIN HOME PROJECT OFFICE, ARKANSAS

PART 1 – GENERAL

1.1 SCOPE OF WORK

Final destination for delivery of product will be the Mountain Home Project Office – Mountain Home, Arkansas. The project office is located at 324 W. 7th St., Mountain Home, Arkansas 72653. Contractor is to provide one (1) SeaArk CUB 2072 boat, one (1) Yamaha 150 HP outboard motor, one (1) Humminbird Helix 10 Chirp MEGA SI+ GPS G3N Fishfinder/Chartplotter, and one (1) tandem axle trailer or equal to the specifications listed in this document. Price shall include complete setup and delivery of the complete unit to Mountain Home Project Office – Mountain Home, Arkansas.

1.2 REFERENCES

None

1.3 BASIS FOR PAYMENT

Lump sum

1.4 COMPLETION TIME

All products shall be delivered to the Mountain Home Project Office within 90 calendar days after award of the purchase order.

1.5 SUBMITTALS

Contractor will be required to provide a submittal of specifications for the product they intend to provide if that boat, motor, GPS unit, or trailer is other than the one specified in this document.

Specifications for alternative items shall be submitted with the quote.

1.6 POINTS OF CONTACT

Contact information will be provided upon award.

PART 2 – PRODUCTS

2.1 MATERIALS

All materials shall be new and undamaged.

PART 3 - EXECUTION

3.1 ACCOMPLISHMENT OF WORK

The contractor shall furnish all materials, equipment, and labor necessary to execute this contract. Contractor is to provide one (1) SeaArk Model CUB 2072 boat, motor, and trailer or equal to the specifications listed in this document. Contractor shall fully assemble and install all parts and accessories as specified in this scope of work.

3.1.1 BOAT STANDARD FEATURES

-Center console boat (FX Fiberglass Center Console with forward dry box, without optional seat cushion) with windshield and stainless steel grab bar and T-top.

-Stainless steel steering wheel with tilt -Minimum 2-12 Volt Accessory Outlets, 2-USB ports -Add an Extra 4 Switch Panel for Accessories -Courtesy Light -Electric Horn -Minimum 30 gallon permanently installed enclosed fuel tank -.125 Gauge Aluminum minimum -.125 Gauge Treadplate floor with non-skid (slip resistant) covering -One (1) minimum 5’ Rod Box – on port side of boat -Built-in bow Step Storage Box -Master power switch that turns off everything EXCEPT motor tilt/trim -Hour meter, tachometer, speedometer, water/oil pressure gauge, fuel gauge, trim gauge, and engine coolant temp gauge -Navigation Lights -Minimum 750 GPH automatic bilge pump -Manual bilge pump -Bow Tilt Trim Switch -Enforcement Package -Min 6 - 8” welded mooring cleats (see diagram) -Float Pods -Stainless steel boarding ladder on port side pod

3.1.2 OUTBOARD MOTOR

Yamaha 150, 4-Stroke Outboard Motor Yamaha Controls, Yamaha Tachometer w/Warning Systems & Trim Gauge Hydraulic steering upgrade Yamaha 10 Micron Fuel Filter System Yamaha Stainless Steel Prop Transom Saver Yamaha NMEA Output (NMEA 2000 Backbone from engine output to helm/graph)

3.1.3 TRAILER

Galvanized Tandem Axle Trailer w/14” Galvanized Wheels & Tires Must be made to fit the boat 14” matching Spare tire & Mount Axles shall be water tight Submersible Lights LED lighting Heavy Duty Composite Guide-On Boards Bow Assist Rollers Post Guide-Ons Trailer/Boat Transom Tie Downs (Ratchet Straps) Keel Roller 4 Bunks Brakes on One Axle Break Away Tongue Upgrade winch and jack to F2 Fulton

3.1.4 BOAT SPECIFICATIONS

Length: 21’1” Beam: 95” Bottom Width: 72” Gauge: .125

3.1.5 BOAT ACCESSORIES

Fire Extinguisher(s) – Quantity – 2 Extra stern light Humminbird Helix 10 Chirp MEGA SI+ GPS G3N Fishfinder/Chartplotter, Lettering on side of Boat Black in Color 10” Tall (RANGER)

3.1.6 INTERIOR FINISHES

Line-X or equivalent vinyl coating – Color –grey: applied on floor, decks, storage boxes, and inside walls to include wrapping over top of gunwales (Cap Rails)

3.1.7 PAINT OPTION

Color – Silver Sparkle

3.1.8 SEATING

Standard rear mounted leaning post seat All upholstery shall be a grey/green combo color pattern.

3.1.9 BATTERY

1 Starting Battery and 1 Accessory Battery Installed on-board battery charger for both batteries Rear Hinged Battery & Bilge Compartment Lid

3.2 TESTING

Lake Test

3.3 WARRANTY

Contractor warrants that all products are new and undamaged and warrants its manufactured products to be free of defects in material and workmanship for a period of five (5) years from the date of purchase. Component parts not manufactured by Contractor will be warranted the length of the respective manufacturers' warranty or a minimum of one-year, inclusive.

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

1 Lump Sum

FFP

(1) SeaArk Model CUB 2072 boat,

(1) Yamaha 150 outboard motor

(1) Galvanized trailer or approved equal in accordance with the specifications and bid schedule.

FOB: Destination

NET AMT

4.0 DIAGRAM

Please see SECTION J, Attachment 1

X – WELDED CLEATS