BLAST_MEDIA_SPECS.docx

1108th TASMG BLAST MEDIA

SPECIFICATIONS AND TECHNICAL DATA

Recyclable Type VIII Nanostructure composite 30/60 Blast Media in 250 lb drums that meets Mil Spec P85891A is used for aircraft paint removal. Therefore, the vendor MUST be ISO9001 Certified for supplying blasting media & recycled blasting media for industrial use.

· Product Description & Specs:

· Nanostructure composite abrasive media made of blended amino thermoset resins and reinforcing fiber

· Size must be 30/60 Mesh- U.S. Standard sive*

· Hardness will be 60 Barcol

· Density is 1.40 to 1.46

· Strip Rate:

· @ 30 PSI 4sq. ft/min

· @ 25 PSI 3sq. ft/min

· ½” Double venture nozzle Mil Spec epoxy primer, urethane topcoat

· Consumption:

· @ 30 PSI 6%

· @ 25 PSI 5%

· Conductivity is 100.00u max

· Heavy Particles are 0.02 max

· Light Particles are 1.00 max

· Antistatic Level is 7/8 of an inch

· Specific Gravity is 1.46 max

· ASH is 2.00% max

· Extract is 1.00% max

· pH is 4 to 8 max

· Requirements:

· Media must be delivered in 250lb Steel Drums

· Spent media is required to be picked up by vendor (in the same steel drums as delivered) from the 1108th TASMG facility and recycled

· Vendor will provide on-site training and assistance at no additional charge if applicable

· The 30/60 Type VIII material, steel drums, delivery and disposal of said plastic media blasting material must be provided for a single per pound price.

· The vendor must be able to deliver the media and pick up the spent media at no additional charge.

· Must be in accordance with:

· Quality Specifications and Testing Requirements listed in the vendor’s ISO 9002 Documentation.

· Mil Spec P85891A

· Safety Data & Packaging:

· A material safety data sheet conforming to AMS 2825 will be supplied prior to, or concurrent with, the initial shipment of material.

· If material formulation is subsequently changed from initial data sheet, a revised data sheet must be supplied to, or concurrent with, the first shipment of material with the revised formulation.

· Packaging: Material will be prepared for shipment in accordance with commercial practice to ensure carrier acceptance and safe transportation to the point of delivery. Packaging will conform to carrier rules and regulations applicable to the mode of transportation.

· The product shall be uniform in quality and condition, clean and free from materials detrimental to the usage of this product.