A.02 Purchase Description -Drag Arm Flex Joint spec 16Sept2024.pdf
PDF 362 KB Posted
- Attached to
- Dredge Essayons Drag Arm Flex Joint Hose Pieces
- Solicitation number
- W9127N25Q0002
About this file
This document is a Purchase Description for 8 each flex joint hoses for the Dredge Essayons operated by the U.S. Army Corps of Engineers Portland District. The flex joint hoses must conform to specific dimensional, pressure, and material requirements outlined in the document. The flex joint hoses are required to be delivered within 16 weeks of contract award.
The related federal contract opportunity, Solicitation W9127N25Q0002, is a Request for Quote (RFQ) for the procurement of the 8 flex joint hoses. The solicitation is a total small business set-aside under NAICS Code 423840 - Industrial Supplies Merchant Wholesalers. Quotes are due by October 28, 2024 at 2:00 PM PST. Prospective offerors must be registered in the System for Award Management (SAM) to be eligible for award.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Drawing 70010-4411-912 Rev A (1 of 1).pdf | ||
| Drawing 101115_ID28in_GIMBAL HOSE_Q15886.pdf | ||
| B.01 CombinedSynopsisSolicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1. GENERAL REQUIREMENTS
Furnish and deliver 8 each flex joint hoses.
2. REFERENCE– DWG#70010-4411-912 RUBBER HOSE FOR GIMBAL JOINT
3. SUBMITTALS- Provide detailed specification and drawing of proposed flex joint hoses with bid for technical evaluation.
4. STATEMENT OF WORK- Provide and deliver 8 each flex joints per reference drawing. Flex joint hoses shall be delivered within 16 weeks of award of contract.
Reference drawing of original flex joint hose attached.
The flex joint hoses shall conform to the following:
28 inches Inside Diameter +/- 0.20
72 inches long face to face +1.00/-0.50
36.25 inch bolt circle
24 bolt holes per flange
40.5 inches =/- 0.25 Flange Outside Diameter
3.00 inches =/- 0.25 flange thickness including 1.00 inch thick steel backing ring
1.125 inch diameter drilled bolt holes
100 psi minimum working internal pressure with 4 to factor of safety
40 psi minimum working vacuum pressure with 4 to factor of safety
7 each 1 inch diameter stiffening bars
+/- 45 degree minimum bending
Salt, sun and rot resistant cover
1.00 ich thick Shore 60A durometer wear liner
4. INSPECTION- The hoses shall be inspected upon delivery.
5. DELIVERY- Deliver to: Logistics Warehouse, 8010 NW ST Helens Road, Portland
Oregon, 97210. Deliver between 0700 and 1500 Weekends and Holidays are excluded.
File details come from the government source that posted it. Updated .