Amendment 1 W9127N22Q0145.pdf

W66QKZ21591723

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to remove the brand name references from the specifications and add additional specification requirements. Deletions are not show n, additions are highlighted in yellow .

All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W9127N22Q0145

X 9B. DATED (SEE ITEM 11)

29-Aug-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

U0001

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

02-Sep-2022

CODE

USACE, PORTLAND DISTRICT

333 SW 1ST AVE

PORTLAND OR 97204

W9127N 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W9127N22Q0145

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

The following have been modified:

SPECIFICATIONS

Specifications New boat, motors, and boat trailer

Fern Ridge Office

The U.S. Army Corps of Engineers (USACE), Fern Ridge office near Eugene, Oregon has a requirement for the supply/installation and delivery of a new boat, new motors, new associated equipment/accessories and a new trailer. All equipment shall be new and shall be supplied, installed, and commissioned at no additional cost to the Government. All items/accessories shall meet Coast Guard standards and be marine grade as applicable or required.

New boat:

Minimum 20 ft (maximum 24 ft including motors) aluminum sled boat with blunt-tipped bow

Minimum 72” wide 6-degree full V bottom Minimum hull thickness of 0.188” with minimum of 5086 aluminum alloy Minimum 4 – 2”x2” channel rolled to match bottom of the boat Minimum 29” 0.125” sides with round formed rib, with minimum 5052 aluminum alloy Aluminum extrusion joining sides and bottom (for strength and durability) Minimum 25” transom height

New engines:

90 HP 4 stroke mounted outboard motor with the following minimum requirements:

Inline 4 stroke motor 4 cylinder Starter: electric Full throttle range: 5000-6000 Displacement: minimum 2.1 Trim system: power trim and tilt Ccontrols meeting the following minimum characteristics:

Fully integrated computerized boat information system which includes but is not limited to providing real time information on engine diagnostics, including RPM, fuel flow and management (if applicable), engine temperature readings, speed, engine trim.

9.9 HP mounted outboard, 4 stroke kicker motor compatible with the above motor with electric start and trim.

Motors include propellors (this is not a jet pump boat) New/equipment/accessories:

Fish finder with high auto-tuning wide-angle sonar with down scan imaging, side imaging and GPS. Pre-loaded with U.S. inland maps. SD card capability. Minimum 7” screen with reduced glare and with removable protective cover. Fish finder installed/commissioned.

Extruded handrails Inner gunnel handrail and gunnel guard Access hole in bow Hydraulic steering, control box, and tach Bow storage compartments with shelf one storage compartment for fuel and a separate storage compartment for gear Two, 6-gallon removeable fuel tanks inside front compartment (shall feed main motor and kicker motor) 3 fully enclosed, lockable, removeable seat storage boxes (leave loose on deck) 3 seats meeting or exceeding the following: 360-degree rotation, long term back and upper body support, UV resistant materials, marine grade shield for stains and mildew, ABYC H-31 compliant, mounted, 250-pound minimum capacity. Color options to be provided to the Government for their selection.

Driver’s console with shelf, door (lockable), and slide-up windshield with 1 marine battery located inside console door

Minimum 2 outlets and 1 USB connection Must be equipped with a tethered engine kill switch Diamond checker plate floors, sandblasted to reduce glare Extruded 7” (minimum) tackle trays on both sides Marine grade interior gray paint Cleats for anchoring (no anchor system needed) 1 fluke style anchor (customer will supply rope for anchor) Bilge pump Running lights 2 transom towing eyes Two straight blade adjustable aluminum oars Installed oar lock blocks with brass oar locks Installed retractable stainless transom straps Zinc block Transducer bracket on both sides Adjustable and removeable (collapsible) marine grade sun canopy Swim step and 3-step ladder (stainless steel ladder) Include operating and maintenance manual for engines and all accessories and trailer Include 2 sets of keys Include Manufacturer’s Statement of Origin document Include all applicable taxes, and state, local, dealer fees as applicable in total price quote

Cost includes installation/commissioning of all the above motors/components/accessories

Trailer:

New USDOT approved single-axle, galvanized trailer with minimum 5,200 lb. axle and side guides (bunks). No trailer brakes are required.

Mounted matching spare tire with spare tire lock and key

Safety equipment:

One, B-1 type hand portable, marine approved fire extinguisher and fire extinguisher holder plus installation

20” throw ring mounted to driver console

Installation and Delivery:

Price shall include all equipment, assembly, installation, commissioning, and FOB destination delivery

Deliver FBO destination to Fern Ridge Lake, West of Eugene, Oregon at no additional cost

Warranties:

All dealer and manufacturer warranties shall be outlined in quote and provided to

Fern Ridge staff upon delivery of completed vessel

The following have been deleted:

52.211-6 Brand Name or Equal AUG 1999

(End of Summary of Changes)