Amendment_12.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04 EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The Solicitation for Repair B551 and B561 at Red River Army Depot (RRAD), Texas is amended as follows.

See SF30 Continuation Sheet(s)

NOTE: Bid Receipt is 17 September 2020; at 10:00 AM, CT

1. CONTRACT ID CODE PAGE OF PAGES

J 1 2

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA 15C. DATE SIGNED 15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer) (Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X 9A. AMENDMENT OF SOLICITATION NO.

W9126G20B0031

X 9B. DATED (SEE ITEM 11)

05-Aug-2020

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

11 SEP 2020

CODE

US ARMY ENGINEER DISTRICT, FORT WORTH

ATTN: CESWF-CT

819 TAYLOR ST, ROOM 2A19

P.O. BOX 17300

FORT WORTH TX 76102-0300

W9126G 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODE CODE

EMAIL: TEL:

W9126G20B0031

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

CHANGES TO SOLICITATION W9126G20B0031

1. Replacement Sections: Replace the following section with the accompanying new section of the same number and title bearing the notation W9126G20B0031 0012:

00 73 46 – WAGE DETERMNATION SCHEDULE

2. Replacement Drawings.- Replace the drawings listed below with the attached new drawings(s) of the same number, bearing the notation W9126G20B0031 0012

Building 551 I-601

Building 561

I-601

End of Summary of Changes

"General Decision Number: TX20200232 09/11/2020

Superseded General Decision Number: TX20190232

State: Texas

Construction Type: Building

County: Bowie County in Texas.

BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2020. If this contract is covered by the EO and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must pay workers in that classification at least the wage rate determined through the conformance process set forth in 29 CFR 5.5(a)(1)(ii) (or the EO minimum wage rate, if it is higher than the conformed wage rate). The EO minimum wage rate will be adjusted annually. Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60).

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/03/2020 1 08/28/2020 2 09/11/2020

BOIL0074-003 01/01/2017

Rates Fringes

BOILERMAKER......................$ 28.00 22.35

ELEC1151-002 09/01/2015

Rates Fringes

ELECTRICIAN......................$ 23.40 13%+5.20

ENGI0178-005 06/01/2020

W9126G20B0031 0012

Rates Fringes

POWER EQUIPMENT OPERATOR

(1) Tower Crane.............$ 32.85 13.10

(2) Cranes with Pile Driving or Caisson Attachment and Hydraulic Crane 60 tons and above.....$ 28.75 10.60

(3) Hydraulic cranes 59 Tons and under..............$ 32.35 13.10

* IRON0084-011 06/01/2020

Rates Fringes

IRONWORKER, ORNAMENTAL...........$ 25.26 7.13

PLUM0100-001 11/01/2017

Rates Fringes

PIPEFITTER.......................$ 27.46 10.77

SUTX2014-007 07/21/2014

Rates Fringes

BRICKLAYER.......................$ 18.33 2.50

CARPENTER........................$ 16.85 0.38

CEMENT MASON/CONCRETE FINISHER...$ 14.70 0.00

INSULATOR - MECHANICAL

(Duct, Pipe & Mechanical System Insulation)...............$ 19.77 7.13

IRONWORKER, REINFORCING..........$ 12.27 0.00

IRONWORKER, STRUCTURAL...........$ 20.00 0.00

LABORER: Common or General......$ 10.66 0.84

LABORER: Mason Tender - Brick...$ 11.36 0.00

LABORER: Mason Tender - Cement/Concrete..................$ 10.66 0.00

LABORER: Pipelayer..............$ 12.49 2.13

LABORER: Roof Tearoff...........$ 11.28 0.00

OPERATOR:

Backhoe/Excavator/Trackhoe.......$ 15.60 0.00

OPERATOR: Bobcat/Skid Steer/Skid Loader................$ 13.93 0.00

OPERATOR: Bulldozer.............$ 14.00 0.27

OPERATOR: Drill.................$ 16.22 0.34

OPERATOR: Forklift..............$ 14.83 0.00

OPERATOR: Grader/Blade..........$ 15.10 1.94

OPERATOR: Loader................$ 12.62 2.42

OPERATOR: Mechanic..............$ 17.52 3.33

OPERATOR: Paver (Asphalt, Aggregate, and Concrete).........$ 16.03 0.00

OPERATOR: Roller................$ 12.70 0.00

PAINTER (Brush, Roller, and Spray)...........................$ 14.45 0.00

PLUMBER..........................$ 21.35 4.55

ROOFER...........................$ 13.75 0.00

SHEET METAL WORKER (HVAC Duct Installation Only)...............$ 22.73 7.52

SHEET METAL WORKER, Excludes HVAC Duct Installation...........$ 15.44 1.46

TILE FINISHER....................$ 11.22 0.00

TILE SETTER......................$ 14.74 0.00

TRUCK DRIVER: Dump Truck........$ 12.39 1.18

TRUCK DRIVER: Flatbed Truck.....$ 19.65 8.57

TRUCK DRIVER: Semi-Trailer Truck............................$ 12.50 0.00

TRUCK DRIVER: Water Truck.......$ 12.00 4.11

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of ""identifiers"" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than ""SU"" or ""UAVG"" denotes that the union classification and rate were prevailing for that classification in the survey. Example: PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers.

0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the ""SU"" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE:

UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.) and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations.

Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7).

Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board).

Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION"

ACP ACOUSTICAL CEILING PANEL

AFF ABOVE FINISHED FLOOR

CG CORNER GUARD

EXP EXPOSED

FRP FIBER REINFORCED PANEL

GT GROUT

HPL HIGH PRESSURE LAMINATE

MB MARKER BOARD

MW MICROWAVE

PWT PORCELAIN WALL TILE

PT PAINT

RB RUBBER BASE

REF REFRIGERATOR

SC SEALED CONCRETE

SG SIGNAGE

SSM SOLID SURFACE MATERIAL

TP TOILET PARTITION

TS TRANSITION STRIP

V VENDING MACHINE

ABBREVATIONS LEGEND

1. THE MANUFACTURER'S COLOR, PATTERN AND TEXTURE LISTED IS NOT

INTENDED TO LIMIT THE SELECTION OF EQUAL COLORS FROM OTHER

MANUFACTURERS.

2. ALL PRODUCTS REFERENCED ARE FOR BASIS OF DESIGN ONLY.

3. BASIS-OF-DESIGN PRODUCT DEFINITION: A PRODUCT IN WHICH A SPECIFIC

MANUFACTURER'S PRODUCT IS NAMED AND ACCOMPANIED BY THE WORDS

"BASIS-OF-DESIGN," INCLUDING MAKE OR MODEL NUMBER OR OTHER

DESIGNATION, TO ESTABLISH THE SIGNIFICANT QUALITIES RELATED TO

TYPE, FUNCTION, DIMENSION, IN-SERVICE PERFORMANCE, PHYSICAL

PROPERTIES, APPEARANCE, AND OTHER CHARACTERISTICS FOR

PURPOSES OF EVALUATING COMPARABLE PRODUCTS OF ADDITIONAL

MANUFACTURERS WHICH MEET SPECIFICATION REQUIREMENTS.

GENERAL NOTES

US Army Corps of

Engineers ®

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D a te

M ar k D e s c ri p ti o n

BLDG 551

R E

D R

IV

E

R A

R M

Y D

E P

O T

R R

A D

B A

N D

B R

E P

A

IR

S F

O R

T W

O R

T H

D

IS

T R

IC

T

T

A Y

L O

R S

T R

E E

T F

O R

T W

O R

T H

T

X

B E

N H

A M

D E

S

IG

N , L

LC

E

M E

R S

O N

R D

S

U

IT

E

S

T . L

O U

IS

, M

O

SEAL:

SHEET

NUMBER

D E

S

IG

N E

D B

Y

S H

E E

T S

IZ

E

A N

S I D

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

W G

B

G G

E B

E R

T

D R

A W

N B

Y

C H

E C

K E

D B

Y

S U

B M

IT

T

E D

B Y

R E

V

Fort Worth District

A c ti o n

Tr ac ki ng

N o.

A U

G U

S T

I-601

R O

O M

F

IN

IS

H

S C

H E

D U

L E

I

N T

E R

IO

R

F

IN

IS

H

L E

G E

N D

A

E R

D

E .U

D O

R .M

U E

L L E

R

CEILING TYPES

TYPE DESCRIPTION MANUFACTURER STYLE/MODEL COLOR COMMENTS

ACP-1 ACOUSTICAL CEILING PANEL ARMSTRONG OPTIMA 3355, 24" X 24" X 1", SQUARE TEGULAR WHITE 9/16" SUPRAFINE SUSPENISION

SYSTEM

ACP-2 ACOUSTICAL CEILING PANEL ARMSTRONG ULTIMA SQUARE LAY-IN, HEALTHZONE 1935, 24" X 24" X 3/4"

WHITE 9/16" SUPRAFINE SUSPENISION

SYSTEM

PT-3 PAINT SHERWIN WILLIAMS ARCYLIC ENAMEL SW 7005 PURE WHITE

WALL FINISHES

TYPE DESCRIPTION MANUFACTURER PATTERN / FINISH COLOR COMMENTS

PT-1 PAINT SHERWIN WILLIAMS EGGSHELL SW 6071 POPULAR GRAY FIELD

PT-2 PAINT SHERWIN WILLIAMS EPOXY EGGSHELL SW 6071 POPULAR GRAY RESTROOMS

PT-4 PAINT SHERWIN WILLIAMS EGGSHELL SW 6072 VERSATILE GRAY ACCENT

PT-5 PAINT SHERWIN WILLIAMS ACRYLIC ENAMEL, SATIN SW 7019 GUANTLET GRAY DOORS AND DOOR FRAMES

PWT-1 PORCELAIN WALL TILE CROSSVILLE SHADES, 1" X 3" MIXED

MOSAICS, HONED

SBC1 WARM GRAYS BREAK ROOM BACK SPLASH

FLOOR TYPES

TYPE DESCRIPTION MANUFACTURER PATTERN / FINISH COLOR NOTES

SC-1 SEALED CONCRETE - - - REFER TO STRUCTURAL PLANS

FOR MORE INFORMATION

WALL BASE TYPES

TYPE DESCRIPTION MANUFACTURER PATTERN / FINISH COLOR COMMENTS

RB-1 RUBBER WALL BASE TARKETT / JOHNSONITE 4" 29 MOONROCK FIELD

MISC. FINISH TYPES

TYPE DESCRIPTION MANUFACTURER PATTERN / FINISH COLOR COMMENTS

CG-1 STAINLESS STEEL CORNER GUARD CONSTRUCTION SPECIALTIES ACROVY CORNER GUARD, CO-8 STAINLESS STEEL, #4 SATIN

FINISH

3 1/2" LEGS

FRP-1 FIBERGLASS REINFORCED PANEL CRANE COMPOSITES VARITEX, SATIN LINEN

TEXTURE, LNMC, 10' X 4' PANELS

PEPPERDUST 8044 RESTROOMS

GT-1 GROUT MAPEI KERAPOXY 11 SAHARA BEIGE PWT-1

HPL-1 HIGH PRESSURE LAMINATE WILSONART SOFTGRAIN FINISH 5TH AVE. ELM BREAK ROOM MILLWORK

MB-1 MARKER BOARD BEST-RITE PORCELAIN DRY-ERASE

WHITEBOARD, 8' X 4', 2028H-25

WHITE, ANODIZED ALUMINUM

FRAME

SG-1 SIGNAGE 2/90 SIGN SYSTEMS - SATIN NATURAL ALUMINUM 101 SLIMLINE, SQUARE END CAPS

SG-2 SIGNAGE 2/90 SIGN SYSTEMS - TAUPE GRAY 712 PAINTED ABS INSERT

SG-3 SIGNAGE 2/90 SIGN SYSTEMS - SOFT WHITE 708 SIGN LETTERING / COPY

SSM-1 SOLID SURFACE MATERIAL WILSONART .50 THICK, MATTE PEARL MIRAGE 9199MG BREAK ROOM COUNTERTOP

TP-1 TOILET PARTITION ASI GLOBAL COLOR THRU PHENOLIC HAZEL 4450C ANODIZED ALUMINUM

BRACKETS

ROOM FINISH SCHEDULE

ROOM

NUMBER ROOM NAME FLOOR FINISHES

WALL

BASE

WALL FINISHES CEILING

FINISH REMARKSNORTH EAST SOUTH WEST

101 MAINTENANCE BAY REFER TO

STRUCTURAL

SHEETS FOR

FLOOR FINISHES

RB-1 PT-1 / FRP-1 PT-1 PT-1 PT-1 EXP / PT-3 FRP LOCATED BEHIND

EYEWASH UNIT AND WASH

FOUNTAIN. REFER TO

ELEVATION ON SHEET

4/IN403

102 COMM RM C SC-1 RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3

103 OFF SC-1 RB-1 PT-1 PT-1 PT-4 PT-1 ACP-1

104 OFF SC-1 RB-1 PT-1 PT-1 PT-4 PT-1 ACP-1

105 OFF SC-1 RB-1 PT-1 PT-1 PT-4 PT-1 ACP-1

106 OFF SC-1 RB-1 PT-1 PT-1 PT-4 PT-1 ACP-1

107 OFF SC-1 RB-1 PT-1 PT-1 PT-4 PT-1 ACP-1

108 OFF SC-1 RB-1 PT-1 PT-1 PT-4 PT-1 ACP-1

109 MEETING SC-1 RB-1 PT-1 PT-1 PT-1 PT-1 ACP-1

110 COMM RM D EXIST RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3 PRESSURE WASH, CLEAN,

AND DEGREASE EXISTING

CONCRETE TO REMAIN

111 OFF EXIST RB-1 PT-1 PT-1 PT-4 PT-1 ACP-1 PRESSURE WASH, CLEAN,

AND DEGREASE EXISTING

CONCRETE TO REMAIN

112 ENTRANCE FACILITY SC-1 RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3

113 RISER RM A SC-1 RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3

114 COMM RM B SC-1 RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3

115 OFF SC-1 RB-1 PT-4 PT-1 PT-1 PT-1 ACP-1

116 OFF SC-1 RB-1 PT-4 PT-1 PT-1 PT-1 ACP-1

117 WOMEN'S TOILET RM. SC-1 RB-1 FRP-1 FRP-1 PT-2 / FRP-1 FRP-1 ACP-2 SOUTH WALL FRP UP TO 5'-0" A.F.F.

118 RISER RM B SC-1 RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3

119 MEN'S TOILET RM. SC-1 RB-1 FRP-1 FRP-1 PT-2 / FRP-1 FRP-1 ACP-2 SOUTH WALL FRP UP TO 5'-0" A.F.F.

120 JC SC-1 RB-1 PT-1 / FRP-1 PT-1 PT-1 PT-1 / FRP-1 ACP-2

121 BREAK ROOM SC-1 RB-1 PT-1 / FRP-1 PT-1 / FRP-1 PT-1 / FRP-1 PT-1 / FRP-1 ACP-1 FRP UP TO 5'-0" A.F.F.

122 COMM RM E EXIST RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3 PRESSURE WASH, CLEAN,

AND DEGREASE EXISTING

CONCRETE TO REMAIN

123 RISER RM C EXIST RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3 PRESSURE WASH, CLEAN,

AND DEGREASE EXISTING

CONCRETE TO REMAIN

124 FIRE ALARM RM. EXIST RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3 PRESSURE WASH, CLEAN, AND DEGREASE EXISTING

CONCRETE TO REMAIN

125 FIRE ALARM RM. SC-1 RB-1 PT-1 PT-1 PT-1 FRP-1 EXP / PT-3

126 LACTATION SC-1 RB-1 PT-1 PT-1 PT-1 PT-1 ACP-1

ABO #4

ABO #4

ABO #4

ABO #4

ABO #4

A

M E

N D

M E

N T

9/

9/

ACP ACOUSTICAL CEILING PANEL

AFF ABOVE FINISHED FLOOR

CG CORNER GUARD

EXP EXPOSED

FRP FIBER REINFORCED PANEL

GT GROUT

HPL HIGH PRESSURE LAMINATE

MB MARKER BOARD

MW MICROWAVE

PWT PORCELAIN WALL TILE

PT PAINT

RB RUBBER BASE

REF REFRIGERATOR

SC SEALED CONCRETE

SG SIGNAGE

SSM SOLID SURFACE MATERIAL

TP TOILET PARTITION

TS TRANSITION STRIP

V VENDING MACHINE

ABBREVATIONS LEGEND

1. THE MANUFACTURER'S COLOR, PATTERN AND TEXTURE LISTED IS NOT

INTENDED TO LIMIT THE SELECTION OF EQUAL COLORS FROM OTHER

MANUFACTURERS.

2. ALL PRODUCTS REFERENCED ARE FOR BASIS OF DESIGN ONLY.

3. BASIS-OF-DESIGN PRODUCT DEFINITION: A PRODUCT IN WHICH A

SPECIFIC MANUFACTURER'S PRODUCT IS NAMED AND ACCOMPANIED BY

THE WORDS "BASIS-OF-DESIGN," INCLUDING MAKE OR MODEL NUMBER

OR OTHER DESIGNATION, TO ESTABLISH THE SIGNIFICANT QUALITIES

RELATED TO TYPE, FUNCTION, DIMENSION, IN-SERVICE PERFORMANCE,

PHYSICAL PROPERTIES, APPEARANCE, AND OTHER CHARACTERISTICS

FOR PURPOSES OF EVALUATING COMPARABLE PRODUCTS OF

ADDITIONAL MANUFACTURERS WHICH MEET SPECIFICATION

REQUIREMENTS.

GENERAL NOTES

US Army Corps of

Engineers ®

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D a te

M ar k D e s c ri p ti o n

BLDG 561

R E

D R

IV

E

R A

R M

Y D

E P

O T

R R

A D

B A

N D

B R

E P

A

IR

S F

O R

T W

O R

T H

D

IS

T R

IC

T

T

A Y

L O

R S

T R

E E

T F

O R

T W

O R

T H

T

X

B E

N H

A M

D E

S

IG

N , L

LC

E

M E

R S

O N

R D

S

U

IT

E

S

T . L

O U

IS

, M

O

SEAL:

SHEET

NUMBER

D E

S

IG

N E

D B

Y

S H

E E

T S

IZ

E

A N

S I D

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

W G

B

G G

E B

E R

T

D R

A W

N B

Y

C H

E C

K E

D B

Y

S U

B M

IT

T

E D

B Y

R E

V

Fort Worth District

A c ti o n

Tr ac ki ng

N o.

A U

G U

S T

I-601

R O

O M

F

IN

IS

H

S C

H U

D U

L E

I

N T

E R

IO

R

F

IN

IS

H

L E

G E

N D

A

E R

D

E U

D O

R M

U E

L L E

R

CEILING TYPES

TYPE DESCRIPTION MANUFACTURER STYLE/MODEL COLOR COMMENTS

ACP-1 ACOUSTICAL CEILING PANEL ARMSTRONG OPTIMA 3355, 24" X 24" X 1",

SQUARE TEGULAR

WHITE 9/16" SUPRAFINE SUSPENSION

SYSTEM

ACP-2 ACOUSTICAL CEILING PANEL ARMSTRONG ULTIMA SQUARE LAY-IN,

HEALTHZONE 1935, 24" X 24" X

3/4"

WHITE 9/16" SUPRAFINE SUSPENSION

SYSTEM

PT-3 PAINT SHERWIN WILLIAMS ACRYLIC ENAMEL SW 7005 PURE WHITE

WALL FINISHES

TYPE DESCRIPTION MANUFACTURER PATTERN / FINISH COLOR COMMENTS

PT-1 PAINT SHERWIN WILLIAMS EGGSHELL SW 6071 POPULAR GRAY FIELD

PT-2 PAINT SHERWIN WILLIAMS EPOXY EGGSHELL SW 6071 POPULAR GRAY RESTROOMS

PT-4 PAINT SHERWIN WILLIAMS EGGSHELL SW 6072 VERSATILE GRAY ACCENT

PT-5 PAINT SHERWIN WILLIAMS ACRYLIC ENAMEL, SATIN SW 7019 GUANTLET GRAY DOOR AND DOOR FRAMES

PWT-1 PORCELAIN WALL TILE CROSSVILLE SHADES, 1" X 3" MIXED

MOSAICS, HONED

SBC1 WARM GRAYS BREAK ROOM BACKSPLASH

FLOOR TYPES

TYPE DESCRIPTION MANUFACTURER PATTERN / FINISH COLOR NOTES

SC-1 SEALED CONCRETE - - - REFER TO STRUCTURAL PLANS FOR

MORE INFORMATION

WALL BASE TYPES

TYPE DESCRIPTION MANUFACTURER PATTERN / FINISH COLOR COMMENTS

RB-1 RUBBER WALL BASE TARKETT / JOHNSONITE 4" 29 MOONROCK FIELD

MISC. FINISH TYPES

TYPE DESCRIPTION MANUFACTURER PATTERN / FINISH COLOR COMMENTS

CG-1 STAINLESS STEEL CORNER GUARD CONSTRUCTION SPECIALTIES ACROVYN CORNER GUARD, CO-8 STAINLESS STEEL, #4 SATIN

FINISH

3 1/2" LEGS

FRP-1 FIBERGLASS REINFORCED PANEL CRANE COMPOSITES VARITEX, SATIN LINEN TEXTURE,

LNMC

PEPPERDUST 8044 RESTROOMS

GT-1 GROUT MAPEI KERAPOXY 11 SAHARA BEIGE PWT-1

HPL-1 HIGH PRESSURE LAMINATE WILSONART SOFTGRAIN FINISH 5TH AVE. ELM BREAK ROOM MILLWORK

MB-1 MARKER BOARD BEST-RITE PORCELAIN DRY-ERASE

WHITEBOARD, 8' X 4', 2028H-25

WHITE, ANODIZED ALUMINUM

FRAME

SG-1 SIGNAGE 2/90 SIGN SYSTEMS - SATIN NATURAL ALUMINUM 101 ALIMLINE, SQUARE END

CAPS

SG-2 SIGNAGE 2/90 SIGN SYSTEMS - TAUPE GRAY 712 PAINTED ABS INSERT

SG-3 SIGNAGE 2/90 SIGN SYSTEMS - SOFT WHITE 708 SIGN LETTERING / COPY

SSM-1 SOLID SURFACE MATERIAL WILSONART .50" THICK, MATTE PEARL MIRAGE 9199MG BREAK ROOM COUNTERTOP

TP-1 TOILET PARTITION ASI GLOBAL COLOR THRU PHENOLIC HAZEL 4450C ANODIZED ALUMINUM

BRACKETS

ROOM FINISH SCHEDULE

ROOM

NUMBER ROOM NAME FLOOR FINISHES

WALL

BASE

WALL FINISHES CEILING

FINISH REMARKSNORTH EAST SOUTH WEST

101 MAINTENANCE BAY REFER TO

STRUCTURAL

SHEETS FOR

FLOOR FINISHES

AND LOCATIONS

RB-1 PT-1 PT-1 PT-1 / FRP-1 PT-1 EXP / PT-3 FRP LOCATED BEHIND EYEWASH

UNIT AND WASH FOUNTAIN.

REFER TO ELEVATION ON SHEET

4/IN403

102 RISER RM A EXIST RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3 PRESSURE WASH, CLEAN, AND

DEGREASE EXISTING CONCRETE

TO REMAIN

103 COMM RM C EXIST RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3 PRESSURE WASH, CLEAN, AND

DEGREASE EXISTING CONCRETE

TO REMAIN

104 OFF EXIST RB-1 PT-1 PT-1 PT-4 PT-1 ACP-1 PRESSURE WASH, CLEAN, AND

DEGREASE EXISTING CONCRETE

TO REMAIN

105 MEN'S TOILET RM. EXIST RB-1 PT-2 / FRP-1 FRP-1 FRP-1 FRP-1 ACP-2 NORTH WALL FRP UP TO 4'-0"

A.F.F., PRESSURE WASH, CLEAN,

AND DEGREASE EXISTING

CONCRETE TO REMAIN

106 JC EXIST RB-1 PT-1 PT-1 PT-1 / FRP-1 PT-1 / FRP-1 ACP-2 PRESSURE WASH, CLEAN, AND

DEGREASE EXISTING CONCRETE

TO REMAIN

107 RISER RM B SC-1 RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3

108 WOMEN'S TOILET RM. SC-1 RB-1 PT-2 / FRP-1 FRP-1 FRP-1 FRP-1 ACP-2 NORTH WALL FRP UP TO 4'-0" A.F.F.

109 OFF SC-1 RB-1 PT-1 PT-1 PT-4 PT-1 ACP-1

110 COMM RM D SC-1 RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3

111 RISER RM C SC-1 RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3

112 ENTRANCE FACILITY SC-1 RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3

113 COMM RM B EXIST RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3 PRESSURE WASH, CLEAN, AND

DEGREASE EXISTING CONCRETE

TO REMAIN

114 OFF EXIST RB-1 PT-4 PT-1 PT-1 PT-1 ACP-1 PRESSURE WASH, CLEAN, AND

DEGREASE EXISTING CONCRETE

TO REMAIN

115 OFF EXIST RB-1 PT-4 PT-1 PT-1 PT-1 ACP-1 PRESSURE WASH, CLEAN, AND

DEGREASE EXISTING CONCRETE

TO REMAIN

116 OFF EXIST RB-1 PT-4 PT-1 PT-1 PT-1 ACP-1 PRESSURE WASH, CLEAN, AND

DEGREASE EXISTING CONCRETE

TO REMAIN

117 OFF EXIST RB-1 PT-4 PT-1 PT-1 PT-1 ACP-1 PRESSURE WASH, CLEAN, AND

DEGREASE EXISTING CONCRETE

TO REMAIN

118 OFF SC-1 RB-1 PT-4 PT-1 PT-1 PT-1 ACP-1

119 OFF SC-1 RB-1 PT-4 PT-1 PT-1 PT-1 ACP-1

120 OFF SC-1 RB-1 PT-4 PT-1 PT-1 PT-1 ACP-1

121 MEETING ROOM SC-1 RB-1 PT-4 PT-1 PT-1 PT-1 ACP-1

122 BREAK ROOM SC-1 RB-1 PT-1 / FRP-1 PT-1 / FRP-1 PT-1 / FRP-1 PT-1 / FRP-1 ACP-1 FRP 4'-0" A.F.F.

123 COMM RM E SC-1 RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3

124 FIRE ALARM RM. EXIST RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3 PRESSURE WASH, CLEAN, AND

DEGREASE EXISTING CONCRETE

TO REMAIN

125 FIRE ALARM RM. SC-1 RB-1 PT-1 PT-1 PT-1 PT-1 EXP / PT-3

126 LACTATION ROOM. SC-1 RB-1 PT-1 PT-1 PT-1 PT-1 ACP-1

ABO #14

ABO #14

ABO #14

ABO #14

ABO #14

A

M E

N D

M E

N T

9/

9/