Attachment_1_-_Salient_Characteristics.pdf

PDF 52 KB Posted

Attached to
Fire Station Alerting System
Solicitation number
W9124N-19-Q-0029
Issued by

About this file

Attachment 1

View the file

Other files

File Type Posted
Combo_-_W9124N-19-Q-0029.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Item Number Manufacturer Part Number Quantity Details

Alerting System Hub

Midian Up to 5 Paging Decoders

Up to 2 fixed zones

ICT ICT Dual12/24v Rackmount Power Supply

Bogen GS‐250 250 Watt Rackmount Amplifier

APC UPS Uninterruptable Power Supply (10 min run time)

NKK VAR Analog Overhead Paging Controller

NKK S332T Radio Monitor Switch

DR1

DinRail wiring panel, w/ system configuration and testing

Dimensions: 19"W x 5.25"H (3U) x 3" D Weight: 3.0 lbs Typical Mounting: Rack

2 Chatsworth 55053‐703 1 Standard Two‐Post Relay Rack, 45 RMU, 19" W x 7’ H x 3" D, Black, Top Angle, UL Listed 3 Bogen SPKL 23 Recessed 6" 20 watt amplifier back box enclosure 2 snap

4 Bogen AT‐10PA 23

Power Rating: 10 Watts Attenuation Per Stem: 3dB Total Attenuation: 33dB Insertion Loss: .4dB Plate Size: 1 gang Resistance: None

5 Bogen S‐86 7

Amplification Type: Passive Connectivity Technology : Wired Controls : Volume Frequency Response: 50 ‐ 12000 Hz Integrated Transformer: 25V/70V operation or 8 Ohm operation Magnet Type: Ceramic Magnet Weight: 6 oz Nominal Output Power: 4 Watt Recommended Placing: Ceiling mountable Sensitivity: 95 dB

Station Alert 1

General (Hub & LEM size and power requirements are the same):

Power requirements: 11.5 ‐ 15.0 volts DC @ 1.5 amps typical Dimnsions: 19"W x 5.25"H (3U) x 9.75" D Weight: 10.0 lbs. Typical Mounting: Rack or conuter top

Batteries:

Lithium (internal to logic controller): CR2032‐WR Shelf life: Up to 5 years typical at 30C, Up to 3 years typical at 55C Installed: 4 months battery backup time (powered down) minimum at 55C

Audio:

Inputs: Three (3) low level Outputs: Line Level 600 ohm balanced Level: ‐5 DB typical, +5 DB Max Noise: 74DB below rated output typical Distortion: Less than .1% at rated output

Radio Interface:

Connectors: Three DB9 male connectors (one per alert source) Audio: Receive audio used discriminator audio balanced or unbalanced @ ‐10DB typical Alert Iputs: 16 total, active low, debvices must be capable of sinking 57 ma.

Interfaces most modern radios and wire line circurits.

Control Relay Outputs:

Operating Voltage: 5 to 30VDC Contact Arrangement: 2 Form C (DPDT) Max resistive load rating: 5 amps at 30VDC

Configurable Items:

System Timers, monitoring, pre‐alerts adjusted from front mounted HMI touch screen

All included in FS‐

10RB

(ComTech 10 Radio Based Fire Station Alerting System

Package)

Description

Chatsworth, 7ft Black Open Frame Red Speaker Light LED Combination w/ backbox mounting hardware

10w Wall Mount Volume Control with Alert Override

STD Indoor Ceiling Mount Speakers w/back box and mounting hardware

6 Bogen AT‐100PA 4

Power Rating: 100 Watts Attenuation Per Stem: 3dB Total Attenuation: 27dB Insertion Loss: .6dB Plate Size: 1 gang Resistance: None

7 Soundsphere Audio 110B 6 Soundsphere 110B Compact Loudspeaker, 70W Max. Continuous Peak Power, 35W Max. Continuous Power RMS, 6‐1/2" (165 mm) Full Range System, Hemispherical Coverage Pattern, Hanging or sur face Mount

8 Bogen SPT‐15A 6

High intelligibility and efficiency; ideal for both one‐way and talk back applications Weatherproof, all‐metal construction 15 watts; 25/70 volt (SPT15A) or 8‐ohm (SP158A) operation Tap settings for 70V: 15, 7.5, 3.8, 1.8, 0.9 watts; for 25V: 15, 7.5, 1.8, 0.94, 0.46 watts Rotary tap impedance selector on SPT15A Tilt and swivel base for easy positioning Screw terminals make installation fast and easy All‐purpose mounting bracket Self‐aligning, field replaceable diaphragm Mocha enamel finish Limited lifetime warranty

9 Federal Informer L2000IRTH 4 Round design, Polycarbonate 4000 hrs. 5x5.5" (HxD) 10 Federal Informer 125STRNR1248DB 9 Round design, Polycarbonate 4000 hrs. 2x3" (HxD)

11 Eaton HT8AER 1 Eaton pushbutton, 30mm, momentary, metal base, metal bezel, operator only, Operator: red, mushroom, round, plastic.

12 Eaton HT8AEH 1 40mm Mushroom Head Operator

13 Bogen GS‐250 1

4 Dedicated MIC inputs 1 Selectable MIC/TEL input, 1 Selectable MIC/AUX input 1 Dedicated AUX input 4‐Ohm direct coupled output 8‐Ohm, 25V, 25VCT, and 70V transformer‐coupled outputs Rack mountable ‐ 2RU package Dual‐function 10‐band graphic equalizer (Acoustic EQ or Feedback Control modes) True loudness contour function Audio Enhancement for improved intelligibility Switchable phantom power (per MIC input) Variable AUX input muting Remote master volume control capability Automatic level control Input muting via contact closure on all inputs Voice‐activated AUX muting on TEL input AUX fade‐back after TEL page Pre‐amp OUT/Power amp IN (insert) connections Booster amp output connection Tape output connection Balanced line driver output (using WMT1A accessory) Low‐cut filter for MIC channels 3‐Speed fan cooling Thermal and overload protection UL and C‐UL listed Tamper‐resistant front cover (GSTRC) available Rack mounting kit (GSRPK) available Remote volume control (GSRVC) available

14 ComTech LEM‐10 1 Hub & LEM size and power requirements are the same 15 Misc. 1

Local Expansion Module Installation Materials

15w, External Horn Speaker w/Weatherseal Kit

Large Red Strobe Light Small Red Strobe Light

Red Mushroom Emergency Doorbell Button

Black Mushroom Doorbell Button

250 Watt Rackmount Amplifier

30W SoundSphere, 360◦ Speaker ‐ Appratus Bay

100w, Rack Mounted Volume Controls w/Override Capability

Item Number Manufacturer Part Number Quantity Detalis

Alerting System Hub

Midian Up to 5 Paging Decoders

Up to 2 fixed zones

ICT ICT Dual12/24v Rackmount Power Supply

Bogen GS‐250 250 Watt Rackmount Amplifier

APC UPS Uninterruptable Power Supply (10 min run time)

NKK VAR Analog Overhead Paging Controller

NKK S332T Radio Monitor Switch

DR1

DinRail wiring panel, w/ system configuration and testing

Dimensions: 19"W x 5.25"H (3U) x 3" D Weight: 3.0 lbs Typical Mounting: Rack

2 Chatsworth 55053‐703 1 Standard Two‐Post Relay Rack, 45 RMU, 19" W x 7’ H x 3" D, Black, Top Angle, UL Listed

3 Bogen S‐86 2

Amplification Type: Passive Connectivity Technology : Wired Controls : Volume Frequency Response: 50 ‐ 12000 Hz Integrated Transformer: 25V/70V operation or 8 Ohm operation Magnet Type: Ceramic Magnet Weight: 6 oz Nominal Output Power: 4 Watt Recommended Placing: Ceiling mountable Sensitivity: 95 dB

4 Bogen SPKL 11 Recessed 6" 20 watt amplifier

5 Bogen AT‐10PA 10

Power Rating: 10 Watts Attenuation Per Stem: 3dB Total Attenuation: 33dB Insertion Loss: .4dB Plate Size: 1 gang Resistance: None

Station Alert 2

General (Hub & LEM size and power requirements are the same):

Power requirements: 11.5 ‐ 15.0 volts DC @ 1.5 amps typical Dimnsions: 19"W x 5.25"H (3U) x 9.75" D Weight: 10.0 lbs. Typical Mounting: Rack or conuter top

Batteries:

Lithium (internal to logic controller): CR2032‐WR Shelf life: Up to 5 years typical at 30C, Up to 3 years typical at 55C Installed: 4 months battery backup time (powered down) minimum at 55C

Audio:

Inputs: Three (3) low level Outputs: Line Level 600 ohm balanced Level: ‐5 DB typical, +5 DB Max Noise: 74DB below rated output typical Distortion: Less than .1% at rated output

Radio Interface:

Connectors: Three DB9 male connectors (one per alert source) Audio: Receive audio used discriminator audio balanced or unbalanced @ ‐10DB typical Alert Iputs: 16 total, active low, debvices must be capable of sinking 57 ma.

Interfaces most modern radios and wire line circurits.

Control Relay Outputs:

Operating Voltage: 5 to 30VDC Contact Arrangement: 2 Form C (DPDT) Max resistive load rating: 5 amps at 30VDC

Configurable Items:

System Timers, monitoring, pre‐alerts adjusted from front mounted HMI touch screen

Description

1 1

All included in FS‐

10RB

(ComTech 10 Radio Based Fire Station Alerting System

Package)

Chatsworth, 7ft Black Open Frame

Standard Ceiling Speakers

Red Light LED Speaker Combo

10w Wall Mount Volume Control with Alert Override

6 Bogen AT‐100PA 1

Power Rating: 100 Watts Attenuation Per Stem: 3dB Total Attenuation: 27dB Insertion Loss: .6dB Plate Size: 1 gang Resistance: None

7 Soundsphere Audio 110B 2 Soundsphere 110B Compact Loudspeaker, 70W Max. Continuous Peak Power, 35W Max. Continuous Power RMS, 6‐1/2" (165 mm) Full Range System, Hemispherical Coverage Pattern, Hanging or sur face Mount

8 Bogen SPT‐15A 2

High intelligibility and efficiency; ideal for both one‐way and talk back applications Weatherproof, all‐metal construction 15 watts; 25/70 volt (SPT15A) or 8‐ohm (SP158A) operation Tap settings for 70V: 15, 7.5, 3.8, 1.8, 0.9 watts; for 25V: 15, 7.5, 1.8, 0.94, 0.46 watts Rotary tap impedance selector on SPT15A Tilt and swivel base for easy positioning Screw terminals make installation fast and easy All‐purpose mounting bracket Self‐aligning, field replaceable diaphragm Mocha enamel finish Limited lifetime warranty

9 Federal Informer L2000IRTH 1 Round design, Polycarbonate 4000 hrs. 5x5.5" (HxD) 10 Federal Informer 125STRNR1248DB 2 Round design, Polycarbonate 4000 hrs. 2x3" (HxD)

11 Eaton HT8AER 1 Eaton pushbutton, 30mm, momentary, metal base, metal bezel, operator only, Operator: red, mushroom, round, plastic.

12 Eaton HT8AEH 1 Eaton pushbutton, 30mm, momentary, metal base, metal bezel, operator only, Operator: black, mushroom, round, plastic.

13 Misc. 1

Small Red Strobe Light

Red Mushroom Emergency Doorbell Button

Black Mushroom Doorbell Button

Installation Materials

100w, Rack Mounted Volume Controles w/Override Capability

30W SoundSphere, 360◦ Speaker ‐ Appratus Bay

15w, External Horn Speaker w/Weatherseal Kit

Large Red Strobe Light

File details come from the government source that posted it.