(DRAFT)_Statement_of_Work_M1097_ETM_Kit.docx

STATEMENT OF WORK (SOW)

15 August 2018

INTRODUCTION / BACKGROUND:

The U.S. Government seeks to temporarily modify a portion of its assigned fleet of M1097/A1/A2, Truck, Utility: Heavy Variant, 4x4, NSN: 2320-01-346-9317/2320-01-371-9583/2320-01-380-8604 HMMWVs with a bolt-on capability to transport an infantry squad of nine passengers.

SCOPE OF WORK / WORK REQUIREMENTS:

Contractor shall provide one hundred and seventy-three (173), nine-passenger modification kits that meet the following specifications:

· Rear cargo area shall incorporate seating for four passengers with lap restraints, seat back rails and individual padding for each rear occupant.

· Lightweight weapons station shall have the capability to rotate 360 degrees but incorporates fixed turret stops to limit traverse to 270 degrees.

· Lightweight weapons station shall be capable of firing the M249, M240, M2 and MK19 series crew serve weapons.

· Lightweight weapons station shall come with a gunner’s platform and sling seat.

· Kit shall be constructed of lightweight tubular structure with rollover protection for crew that meets 10,000 lb Roof Crush Test and can be quickly removed or folded down to facilitate configuring the vehicle in its lowest profile for airborne operations

· Kit installation shall require only minor alterations to the vehicle and facilitate ease of reverting back to original configuration when removed.

· Kit shall be constructed in a manner to allow for air-drop ability when installed on an M1097.

· Installed kit shall comply with current handling and safety characteristics of the basic M1097 configuration.

· All installation hardware required to affix the kit to an M1097 and of sufficient grade to prevent premature failure shall be provided.

· Contractor shall provide on-site technical support at Fort Bragg at the time of install for a maximum of two days as scheduled by the United States Government.

· Kits shall be provided with the Army standard green color Chemical Agent Resistance Coating (CARC).

· Detailed mounting instructions shall be provided with individual kits.

· Detailed operator and field level maintenance instructions shall be provided with individual kits.

· Detailed bill of materials shall be provided which outlines repair part numbers and source of resupply.

PERIOD OF PERFORMANCE / SCHEDULE:

Delivery of four kits is expected within 30 days after award.

PLACE OF PERFORMANCE / WORK LOCATION:

One hundred and seventy-three kits shall be delivered to Fort Campbell, Kentucky.

United States Government (USG) shall be responsible for installation of bolt-on kits to assigned M1097s at Fort Campbell, Kentucky.

Contractor shall provide on-site technical support at Fort Campbell, Kentucky, during install of the first kit. Initial kit installation not to exceed ten working days.

SPECIFIC TASKS: Contractor performance shall be monitored by the COR. Work shall be accomplished IAW requirements as set forth in this instrument.

5.1. Basic Services: Perform necessary material movement, acquisition, installation and inspection of Enhanced Technical Mobility (ETM) Kits, and assist in the training of Logistics Readiness Center (LRC) representatives and Infantry Brigade Combat Team (IBCT) Soldiers on proper installation, inspection, and removal of ETM Kits.

5.2. Installation Services: Provide complete installation.

5.2.1 Installation of ETM Kits.

5.2.2. Contractor will include training on installation of ETM kits and inspection of ETM kits once they are installed.

5.2.3. Each of the kits will be installed to pre-selected M1097s by each of the IBCTs.

5.2.4. Each kit will come with all components and mounting hardware that was installed and/or included as part of Aberdeen Test and Evaluation Command’s (ATEC) Safety Confirmation to Tank-automotive and Armaments Command (TACOM).

ACCEPTANCE CRITERIA / INSPECTION:

Kits shall contain all components and mounting hardware as specified in the installation instructions as provided by the contractor in accordance with the requirements stated above.

Kits shall be free of defects that would prevent mounting on the M1097 platform or otherwise affect proper operation of the kit components.

All kits must meet the following criteria in order to be considered acceptable:

· Lightweight weapons station shall rotate freely without any binding.

· All passenger restraint hardware shall fasten or latch securely.

· All welds shall be free of porosity, cracks, or inclusions.

· All painted metal surfaces shall be free of bare spots, rust, or corrosion.

· All seat cushions shall be free of rips or tears.