PWS_Lift Services (Lift Tickets)_2027-2032.pdf

PDF 149 KB Posted

Attached to
ABNSOD Airlift Support Services (SATOC)
Solicitation number
W91247-27-D-A002
Issued by

About this file

This is a Performance Work Statement (PWS) for lift ticket services issued by the United States Army Operational Test Command, Airborne and Special Operations Directorate (ABNSOD). The contractor shall provide aircraft support, including fuel, personnel, and equipment for air operations within a 50-mile radius of Fort Bragg, North Carolina. The primary objective is to provide safe and consistent aircraft support for parachute operations, specifically rides on CASA 212 or similar ramped aircraft with tailgate exits for Military Free Fall (MFF), Double Bag Static Line (DBSL), and static line parachuting techniques, as well as Caravan or similar side-door aircraft for MFF jumpers and mission support personnel. Aircraft must reach altitudes up to 17,999 feet to enable parachute jumps. Operations are conducted one to two times monthly with an average of 20 qualified MFF jumpers conducting up to four jumps per mission day, during daylight or night hours according to the unit's training schedule. Each ticket/ride is approximately 20 minutes and permits one qualified jumper to conduct one jump only as designated by ABNSOD and in direct support of the ABNSOTD Test Parachutist Certification Program or Operational Test Mission.

The contract is an IDIQ Agreement with third-party payment option using Government Purchase Cards (25K expanded authority) with a five-year period of performance consisting of one base year plus four option years. All aircraft must be on the DoD-approved list of air carriers per DODI 4500.53 or approved by USSOCOM J-31 inspection. The contractor must provide DoD-approved commercial operators with proper certifications, employ FAA-licensed pilots and mechanics with current certifications, and maintain a contract manager available during normal duty hours (7:30 AM–4:30 PM, Monday–Friday) with after-hours contact information. Personnel must be able to read, write, speak, and understand English, present a neat appearance with company identification, and comply with all Fort Bragg access and security requirements. The contractor is responsible for establishing a Quality Control Plan addressing defect prevention, inspection/safety systems, and corrective actions, with all certifications and training maintained at no cost to the Government. The Government will coordinate directly with the contractor for lift times and dates, and payment shall be rendered by invoice following each training iteration. The contractor must also report all labor hours via the Enterprise Contractor Manpower Reporting system by October 31 of each calendar year.

View the file

Other files

File Type Posted
Justification and Approval limiting Competition.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

PERFORMANCE WORK STATEMENT (PWS)

Lift Tickets

United States Army Operational Test Command

Airborne and Special Operations Directorate (ABNSOD)

Part 1

General Information

1. General. This is a non-personal services contract to provide lift ride services. The contractor shall provide Airborne and Special Operations Directorate (ABNSOD) with aircraft support, including fuel, personnel and equipment necessary to perform air operations within a 50 mile radius of Fort Bragg, North Carolina.

1.1 Description of Services/Introduction: The contractor shall provide all personnel, equipment, supplies, facilities, tools, materials, supervision, and other items and non-personal services necessary to perform aviation support by transporting ABNSOD personnel and ABNSOD authorized supporting personnel to jump altitude. Authorized personnel include assigned or attached personnel on airborne or MFF duty status and mission dependent others in direct support to test missions: test player unit personnel, phystechs, video, photography. No Space A, non-mission personnel, may accept government funded services. Space A personnel with a MFF mission with coordinated “strap hanger” orders may accept government funded services.

1.2 Background: ABNSOD has a multi-year relationship with local vendors who can provide the required aircraft support in the achievement of our mission and training goals. The USAF is the first choice for all military training requirements for aircraft, often referred to as “high performance” aircraft. Training lines are limited, which creates a bona fide need for other commercial sources of airlift to enable the mission. US Army or other DoD aircraft are also preferred for support, however, like USAF training lines, other DoD aircraft availability is limited.

1.3 OBJECTIVE: The main objective of the lift ticket support service contract is to provide

ABNSOD consistent and safe aircraft support. This support consists of rides (seats) on a CASA

212 or other similar ramped aircraft with tailgate exit for MFF, Double Bag Static Line (DBSL) parachuting techniques and Static line parachuting techniques. Support also consists of a

Caravan or similar side-door aircraft for Military Free Fall (MFF) parachute jumpers and mission support personnel.

1.4. Scope: The contractor shall provide aircraft to reach an altitude of up to 17,999 ft. to enable jumpers to parachute from the aircraft. The requirement is performed one to two times a month with an average of 20 qualified MFF jumpers conducting up to 4 jumps during a mission-day, during daylight or night, according to unit’s training schedule. One ticket/ride is approximately

20 minutes and is good for one jumper to conduct one jump. Jumps will only be conducted by qualified individuals/groups designated as such by ABNSOD and in direct support of

ABNSOTD Test Parachutist Certification Program or Operational Test Mission. “Strap-hang” /

Space-Available use of ABNSOD funded lift is strictly governed by ABNSOD Director’s Policy.

Contractor must be able to provide parachute jumper with a seat, a seat belt, pilot, and plane. All aircraft used by vendors must be on the DoD approved list of air carriers provided by the U. S.

Army Transportation Command (USTRANSCOM) per DODI 4500.53 or an inspected list certified by provision of DODI 4500.53, paragraphs 5.2 and 5.3. In this requirement the alternate listing of approved air carriers is maintained by US Special Operations Command (USSOCOM).

1.5. Period of Performance: The PoP shall be for a five-year period, one Base Year plus four

Option Years.

1.6. General information.

1.6.1 Hours of Operation: The Government will coordinate directly with the Contractor for Lift times and dates. Jumps may be during daylight hours or night/limited visibility hours.

1.6.2 Place of Performance: The work to be performed under this contract will be performed at the Contractor’s facilities, using the contractor’s aircraft.

1.6.3 Type of Contract: The Government will award a IDIQ Agreement with Third-Party

Payment option (25K expanded authority Government Purchase Card) type of Contract.

1.7 Personnel.

1.7.1 General Training Requirements: The Contractor is responsible for hiring qualified personnel with required certifications in performance of this contract.

1.7.2 Contract Manager. The Contractor shall provide a Contract Manager who shall be responsible for the performance of the work. Within ten (10) days after contract award, the

Contractor shall provide in writing to the Contracting Officer (KO) and Contracting Officer's

Representative (COR), the name and telephone number of the Contract Manager and an alternate who can act as representative and who will be responsible for overall coordination and/or implementation of services.

1.7.3 The contract manager or alternate shall be available to coordinate aircraft scheduling during normal duty hours (7:30 AM through 4:30 PM, Monday through Friday). After normal duty hours, the Contract Manager or alternate shall provide a telephone number for notification of schedule changes. The Contractor shall provide a telephone number for the Contract Manager and alternate during duty and non-duty hours within ten (10) days after contract award.

1.7.4 Contractor personnel shall meet the following requirements:

1.7.5 Contractor personnel must be able to read, write, speak and understand English.

1.7.6 The Government has the right to restrict access to Fort Bragg, NC, of any Contractor employee, or prospective Contractor employee, who is identified as a potential threat to the health, safety, security, general well-being or operational mission of the installation and its population. Vehicle inspections are conducted and obtaining information such as vehicle registration, licenses check, vehicle insurance, picture ID and then a post pass will be issued for non-sensitive areas.

1.7.7 Aviation Compliance. The contractor shall provide DoD approved commercial operators, to include aircraft certifications and licenses in accordance with DoD Instruction 4500.53 -DoD

Commercial Air Transportation Quality and Safety Review Program. The DoD-approved commercial operator must appear on the current AMC Commercial Airlift Review Board

(CARB) “Paratroop Commercial Operator Listing” or on the companion inspected and approved alternate listing per DODI 4500.53 Section 5 for the duration of the contract period. Any non-

CARB carrier must be inspected and approved by USSOCOM J-31. Contractor shall perform services in accordance with DoD Instruction 4500.53 under either FAA Part-135 or Part-91

Certification.

1.7.8 Contractor personnel shall present a neat appearance and be easily recognized. This may be accomplished by wearing distinctive clothing bearing the name of the company or by wearing appropriate badges, which contain the company name and employee name. Daily gate passes shall be issued after verification of proper ID.

1.7.9 The Contractor shall ensure that pilot and co-pilot are qualified and have the following current and valid professional certifications/licenses before starting work. The pilot and co-pilot shall provide a copy of all relevant certifications/licenses to the COR to be reviewed prior to participating in any airborne operations (10) days after contract is awarded as listed below:

Federal Aviation Administration (FAA) Licensed Pilots

FAA Licensed Aircraft Mechanics

FAA Approval Data for Aircraft

DoD Inspection Results conforming to requirements of DODI 4500.53

1.7.10 The Contractor shall ensure that all certifications required for Contractor personnel within this PWS remain current during the term of the contract. Certification/recertification shall be at no cost to the Government.

1.7.11 The Contractor shall ensure that there are sufficient, qualified personnel to properly perform this contract and shall ensure that pilots are FAA current and qualified to perform these types of operations.

1.7.12 The Contractor’s employees shall be fully trained and licensed as FAA pilots to perform under this contract. The Contractor must maintain records of all training received. No

Government training shall be provided.

1.7.13 The Contractor shall not employ any person who is an employee of the United States

Government if the employment of that person would create a conflict of interest nor shall the

Contractor employ any person who is an employee of the Department of the Army, either military or civilian, unless such person seeks and receives approval in accordance with

Department of Defense Directive (DODD) 5500.7-R.

1.4. PHYSICAL SECURITY. The Contractor shall be responsible for safeguarding all

Government property provided for Contractor use. At the close of each work period, Government facilities, equipment and materials shall be secured.

1.8 PROTECTION.

1.8.1 iWATCH Training. The contractor and all associated sub-contractors shall brief all employees on the local iWATCH program (training standards provided by the requiring activity

ATO). I WATCH training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the appropriate personnel. The government will provide I WATCH training package to contractor and associated sub-contractor for execution. iWATCH training shall be completed within 30 calendar days of contract award and prior to commencing work performance. Training results are to be reported to the COR prior to work performance. Access and General Protection/Security Policy and Procedures. The contractor shall be responsible for meeting each of the access and general protection security policy and procedures. COR and Security Manager (910) 432-0601 will assist when requested.

1.8.2 Disclosure of Information. The contractor shall direct to the COR all inquiries, comments, or complaints arising from matters observed, experienced, or learned as a result of, or in connection with the performance of the contract, the resolution of which may require the dissemination of official information.

1.8.3 Contractor Manpower Reporting (CMR). The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract via a secure data collection site. The contractor is required to completely fill in all required data fields using the following web address: http://www.ecmra.mil/. Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year.

Contractors may direct questions to the help desk at help desk at: http://www.ecmra.mil/.

1.8.4 Safety. Contractor and associated sub-contractors shall provide a safe and healthful work environment for their employees as prescribed in FAR 52.236-13, 29 CFR Part 1910, pertinent provisions of AR 385-10, and local regulations, policies, and SOPS. They shall safeguard public and government personnel, property, and equipment, and avoid interruption of Government

Operations. The Contractor will report accidents or losses to the Contracting Officer as specified in relevant regulations and standards. Whenever the Contractor becomes aware of serious or imminent danger to Government, civilian or Contractor personnel, the Contractor shall take immediate corrective action.

1.8.5 Contracting Officer Representative (COR): The (COR) will be identified by separate letter.

The COR monitors all technical aspects of the contract and assists in contract administration The

COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract: perform inspections necessary in connection with contract performance: maintain written and oral communications with the Contractor concerning technical aspects of the contract: issue written interpretations of technical requirements, http://www.ecmra.mil/ http://www.ecmra.mil/ including Government drawings, designs, specifications: monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies; coordinate availability of government furnished property, and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order.

1.9. QUALITY CONTROL.

1.9.1. The Contractor shall establish and maintain a complete Quality Control Plan to ensure the requirements of the contract are provided as specified. One copy of the Contractor's Quality

Control Plan shall be provided to the Contracting Officer no later than the pre-performance conference. An updated copy must be provided to the Contracting Officer on the contract start date and as changes occur.

1.9.2. The plan shall include:

1.9.2.1. The method(s) for identifying and preventing defects in the quality or safety of service performed before the level of performance becomes unacceptable and address processes for corrective actions without dependence upon Government direction.

1.9.2.2. Establish an inspection/safety system covering all services required by this contract.

This plan shall specify areas to be inspected on a scheduled or unscheduled basis, frequency of inspections, the title and organizational placement of inspectors.

1.9.2.3. A description of the records to be kept to document inspections and corrective or preventive actions taken. Records of inspections shall be kept and made available to the

Government throughout the contract performance period and for the period after contract completion until final settlement of any claims under this contract.

1.9.2.4. Corrective Actions. If at any time it is determined by the Contracting Officer that the

Contractor’s quality/safety control program does not provide results which conform to contract requirements, action shall be taken by the Contractor to correct the deficiency, i.e., replacement of personnel, additional quality control/safety inspection, etc.

1.9.2.4.1. The COR or designated representative shall inspect the actual aircraft and any equipment therein and any record thereof and upon detection of any defects in the aircraft/equipment pursuant to FAA/FCC standard/regulations, shall request the Contractor to commence immediate action to repair/replace the defective aircraft/equipment at no cost to the

Government. The Government does not assume and hereby specifically disavows any duty to inspect the equipment in order to assure safe operation. The Contractor or subcontractor(s) at any tier are at all times responsible for assuring equipment is in a safe and serviceable condition and shall perform all tasks in a safe, responsible manner. The Contractor shall in all cases ensure any equipment used in the performance of this contract is in a safe and serviceable condition.

1.10. QUALITY ASSURANCE.

1.10.1. The Government will evaluate the Contractor's performance under this contract. All surveillance observations (QASP/PRS) will be recorded by the Government. When an observation indicates defective performance, the COR will request the Contract Manager to initial the observation.

1.10.2. Performance Evaluation Meetings. Meetings will be as often as necessary as determined by the KO. However, if the Contractor requests, a meeting will be held whenever a Contract

Discrepancy Report is issued. The written minutes of these meetings shall be signed by the

Contractor's manager, KO, and COR. Should the Contractor not concur with the minutes, the

Contractor shall so state any areas of nonoccurrence in writing to the KO within one (1) day of receipt of the signed minutes.

1.11 HOURS OF OPERATION. The Contractor shall provide aircraft and related personnel to support training or testing during day or night/limited visibility operations. The contractor shall reserve the aircraft for the ABNSOD given a 30-day request by the COR or a lesser time period if agreed upon by both the COR and contractor.

PART 2

DEFINITIONS & ACRONYMS

2. DEFINITIONS AND ACRONYMS:

2.1. DEFINITIONS:

2.1.1. CONTRACTOR. A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.

2.1.2. CONTRACTING OFFICER. A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the government.

Note: The only individual who can legally bind the government.

2.1.3. CONTRACTING OFFICER'S REPRESENTATIVE (COR). An employee of the U.S.

Government appointed by the contracting officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

2.2. ACRONYMS:

ACOR Alternate Contracting Officer's Representative

AFARS Army Federal Acquisition Regulation Supplement

AR Army Regulation

CFR Code of Federal Regulations

COR Contracting Officer Representative

COTS Commercial-Off-the-Shelf

DA Department of the Army

DD250 Department of Defense Form 250 (Receiving Report)

DFARS Defense Federal Acquisition Regulation Supplement

DMDC Defense Manpower Data Center

DOD Department of Defense

FAA Federal Aviation Administration

FAR Federal Acquisition Regulation

KO Contracting Officer

MFF Military Free Fall

PWS Performance Work Statement

SL Static Line

PART 3

GOVERNMENT FURNISHED PROPERTY, EQUIPMENT, AND SERVICES

3. GOVERNMENT FURNISHED ITEMS AND SERVICES: N/A

PART 4

CONTRACTOR FURNISHED ITEMS AND SERVICES

4. CONTRACTOR FURNISHED ITEMS AND RESPONSIBILITIES:

4.1 General: The Contractor shall furnish all supplies, equipment, facilities and services required to perform work under this contract that are not listed under Section 3 of this PWS.

PART 5

SPECIFIC TASKS

5. Specific Tasks:

5.1. Basic Services. The contractor provides aircraft, aircrew, drop zone, and support to conduct

MFF and SL parachute operations from high altitude.

5.2. Flights to Altitude. The contractor shall ensure lift aircrew coordinate with the Government for mission plans, altitude, training objectives, and applicable Notices to Airman (NOTAM). On achieving altitude, ensure safe exit of all jump personnel and return to base with any support personnel.

5.3. Scheduling. The contractor shall coordinate all scheduling with designated ABNSOD personnel or the COR.

5.4. Payment. The contractor shall accept third-party payment by means of the Visa-logoed

Government Purchase Card (GPC). The contractor shall invoice each training iteration and present it to the designated operations personnel or the COR.

5.5 Enterprise Contractor Manpower Reporting (ECMR) (http://www.ecmra.mil/). The

Contractor shall report ALL Contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Department of Defense via a secure data collection site. The Contractor is required to completely fill in all required data fields using the above web address and then click on “Department of the Army CMRA” or the icon of the DoD organization that is receiving or benefitting from the contracted services.

Reporting inputs will be for the labor executed during the period of performance during each

Government FY, which runs from October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported NLT October 31 of each calendar year, beginning with 2013. Contractors may direct questions to the help desk by clicking on

“Send an email” which is located under the Help Resources ribbon on the right side of the login page of the applicable Service/Component’s CMR website at http://www.ecmra.mil. As part of its submission, the Contractor will also provide the estimated total cost (if any) incurred to comply with this reporting requirement.”

PART 6

APPLICABLE PUBLICATIONS

6. APPLICABLE PUBLICATIONS (CURRENT EDITIONS):

6.1 DODI 4500.53, 07 MAY 2021

PART 7

ATTACHMENT/TECHNICAL EXHIBIT LISTING

7. Attachment/Technical Exhibit List: N/A

File details come from the government source that posted it. Updated .