PWS.pdf

Ver. October 2022

PERFORMANCE WORK STATEMENT (PWS)

FOR

Repair Services on 26k Forklift

1.0 General:

1.1 Scope: The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary, except as specified in Paragraph 3.0 as Government Furnished, to perform Repair Services on 26k Forklift, as defined in this

PWS.

1.1.1 Objectives: To provide repair services to the North Carolina Army National Guard on damaged 26,000 lb capacity forklift, to include coordinating transportation of damaged forklift to and from designated repair shop.

1.2 Background: The 26k forklift hit a fixed object during transport. Damages assessed include mast. Contractor will be required to coordinate transport of forklift to designated local shop location to conduct repair services on damaged 26k Forklift and coordinate transportation back to the customer upon completion of repair.

1.3 Period of Performance (PoP): The Period of Performance shall be no longer than 60 days from the date of contract award.

1.4 General Information:

1.4.1 Place and Performance of Services: The contractor shall pickup and return the forklift between the hours of 0800 - 1400 on Monday through Friday, except on recognized US holidays or when the Government facility/installation is closed due to local or national emergencies, administrative closings, or similar Government-directed facility/installation closings. Current location of forklift is at the United States Property and Fiscal Office (USPFO) for North Carolina Warehouse, 4201 Reedy Creek Road, Raleigh, NC 27607. The contractor shall at all times maintain an adequate work force for the uninterrupted performance of all tasks defined within this PWS when the Government facility/installation is not closed for the above reasons. When hiring personnel, the contractor shall keep in mind that the stability and continuity of the work force are essential. Teleworking is not authorized.

1.4.1.1 Telework: The Government does not permit the contractor to telework in support of this requirement. In furtherance of Continuity of Operations Planning (COOP), a telework program may be enacted to ensure that the Government's mission-critical operations stay operational during times of national emergency or incidents of national significance. Telework shall be at no additional cost to the Government.

1.4.1.2 Unscheduled gate closures by the Security Police may occur at any time causing all personnel entering or exiting a closed installation to experience a delay. This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges.

1.4.1.3 The contractor’s employees shall become familiar with and obey the regulations of the installation; including fire, traffic, safety and security regulations while on the installation. Contractor employees should only enter restricted areas when required to do so and only upon prior approval. All contractor employees shall carry proper identification with them at all times, and shall be subject to such checks as may be deemed necessary. The contractor shall ensure compliance with all regulations and orders of the installation, which may affect performance. The Government reserves the right to direct the removal of an employee from Government property or revoke access to Government systems for misconduct, security reasons, or any overt evidence of communicable disease. Removal of contractor employees for reasons stated above does not relieve the Contractor from responsibility for total performance of this contract.

1.4.2 Recognized Holidays: The following are recognized United States (US) holidays.

The contractor shall not perform transportation services on these days:

1.4.2.1 New Year’s Day: January 1st

1.4.2.2 Martin Luther King, Jr.’s Birthday

1.4.2.3 President’s Day

1.4.2.4 Memorial Day

1.4.2.5 Juneteenth National Independence Day: June 19th

1.4.2.6 Independence Day: July 4th

1.4.2.7 Labor Day

1.4.2.8 Columbus Day

1.4.2.9 Veteran’s Day: November 11th

1.4.2.10 Thanksgiving Day

1.4.2.11 Christmas Day: December 25th

1.4.3 Quality Control (QC): The contractor shall develop and maintain an effective QC Plan (QCP) to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s QCP is the means by which it assures itself that its work complies with the requirements of the contract. As a minimum, the contractor shall develop QC procedures that address the areas identified in Technical Exhibit 1, Performance Requirements Summary (PRS). A final QCP shall be submitted to the Contracting Officer Representative (COR) NLT 10 days after contract award.

After acceptance of the QCP, the contractor shall obtain the Contracting Officer’s (KO’s) acceptance in writing of any proposed changes to its QCP.

1.4.4 Reserved

1.4.5 Installation Access and Security Requirements. The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the COR. The contractor and all associated subcontractor employees shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services, or Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by Department of Defense (DoD), Headquarters Department of Army (HQDA) and/or local policy (see PWS 6.0). Should the Force Protection Condition (FPCON) change, the

1.4.5.1.3 Reserved

1.4.5.1.5.1 Failure to comply with these requirements may result in withholding of final payment.

1.4.5.2 For contractors that do not require a CAC, but require access to a DoD facility or installation: Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05), and applicable installation, facility and area commander installation/facility access, and local security policies and procedures (provided by a Government representative).

1.4.5.3 Awareness Training (AT) Level 1: All contractor employees, including subcontractor employees, requiring access to Army installations, facilities, and controlled access areas shall complete AT Level 1 training within 30 calendar days after contract start date and within 30 calendar days of new employees commencing performance. The contractor shall submit certificates of completion for each affected contractor and subcontractor employee to the government representative within 15 calendar days after completion of training by each employee or subcontractor personnel. AT Level 1 awareness training is available at the following website:

https://jko.jten.mil/courses/atl1/launch.html.

1.4.5.4 iWATCH Training: The contractor and all associated subcontractors with an area of performance within an Army-controlled installation, facilities or area shall brief all employees on the local iWATCH program (training standards provided by the requiring activity Antiterrorism Officer (ATO)). This local developed training shall be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the government representative or the KO. This training shall be completed within 30 calendar days of contract award and within 30 calendar days of new employees commencing performance. The contractor shall report completion for each contractor employee and subcontractor employee to the government representative, within 15 calendar days after completion of training.

1.4.5.5 Communications Security/Information Technology (COMSEC/IT) Security. All communications with DoD organizations are subject to COMSEC review. All telephone communications networks are continually subject to intercept by unfriendly intelligence organizations. DoD has authorized the military departments to conduct COMSEC monitoring and recording of telephone calls originating from, or terminating at, DoD organizations. Therefore, the contractor is advised that any time contractor personnel place or receive a call they are subject to COMSEC procedures. The contractor shall ensure wide and frequent dissemination of the above information to all employees dealing with DoD information. The contractor shall abide by all Government regulations concerning the authorized use of the Government's computer network, including the restriction against using the network to recruit Government personnel or advertise job openings.

1.4.5.6 Reserved

1.4.5.10 Protection of Personally Identifiable Information (PII). The contractor shall protect all PII encountered in the performance of services in accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 224.103 Personally Identifiable Information and Department of Defense Directive (DoDD) 5400.11, Department of Defense Privacy Program, and DoD 5400.11-R. If a PII breach results from the contractor’s violation of the aforementioned policies, the contractor shall bear all notification costs, call-center support costs, and credit monitoring service costs for all individuals whose PII has been compromised.

1.4.5.11 Reserved

1.4.6 Physical Security. The contractor shall safeguard all Government property provided for contractor use. At the close of each work period, Government facilities, equipment and materials shall be secured.

1.4.6.1 Key Control. NOTE: All references to keys include key cards. The contractor shall establish and implement methods of ensuring that no keys/key cards issued by the Government are lost or misplaced or are used by unauthorized persons. No keys issued by the Government shall be duplicated. Such procedures shall include turn-in of any issued keys by personnel who no longer require access to locked areas.

1.4.6.1.1 The contractor shall immediately report any occurrences of lost or duplicated keys/key cards to the government representative.

1.4.6.1.2 In the event keys, other than master keys, are lost or duplicated, the contractor shall, upon direction by the KO, re-key or replace the affected lock or locks; however, the Government, at its option, may replace the affected lock or locks or perform re-keying. When the Government replaces or re-keys the locks, the Government will deduct the total cost of lock replacement or re-keying from the monthly payment due the contractor. In the event a master key is lost or duplicated, the Government will replace all locks and keys for that system, and will deduct the total cost from the monthly payment due the contractor.

1.4.6.1.3 The contactor shall prohibit the use of the Government issued keys/key cards by any persons other than the contractor’s employees. The contractor shall prohibit the opening of locked areas by contractor employees to permit entrance of persons other than contactor employees engaged in the performance of services in those areas, or personnel authorized entrance by the KO.

1.4.7 Special Qualifications: The contractor shall ensure all employees possess all required licenses for operating Hoist or Toyota manufactured forklift must be a Toyota Certified Technician used in the performance of this contract. This does not include education or other qualifications for the position in which the contractor employee is performing, dress codes, or other information. (NOTE: The Government does not provide training to contractors. Contractors must ensure that any personnel performing under a contract are fully trained, licensed, certified, and otherwise qualified to provide services.)

1.4.8 Post Award Conference/Periodic Progress Meetings: The contractor agrees to attend any post award conference convened by the KO in accordance with FAR 42.5.

The KO, government representative and other Government personnel, as appropriate, may meet periodically with the contractor to review the contactor’s performance. At these meetings, the KO will apprise the contractor of how the Government views the contractor’s performance and the contractor shall apprise the Government of problems, if any, being experienced. The contractor shall resolve outstanding issues raised by the Government. Contractor attendance at these meetings shall be at no additional cost to the Government.

1.4.9 Contract Manager (CM): The contactor shall designate a CM who shall ensure performance under this contract. The name of this person, and an alternate who shall act for the contractor when the CM is absent, shall be designated in writing to the KO.

The CM or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The CM shall work through the COR to resolve issues, receive technical instructions, and ensure adequate performance of services. The CM shall ensure that contractor employees do not perform any services outside the scope of the contract without an official modification issued by the KO. The CM shall ensure contractor employees understand that services performed outside the scope of the contract are performed wholly at the expense of the contractor.

1.4.10 Identification of Contractor Employees: All contractor personnel attending meetings, answering Government telephones and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression that they are Government employees. The contractor shall ensure that all documents or reports produced by contractor personnel are suitably marked as contractor products or that contractor participation is appropriately disclosed. The contractor’s status as a “contractor” shall be predominantly displayed in all correspondence types (to include signature blocks on e-mail) and dealings with Government or non-Government entities. Contractor personnel shall wear identification badges distinguishing themselves as such. The badges shall have the company name, employee name and the word “contractor” displayed.

1.4.10.1 The contractor shall retrieve all identification media (including vehicle passes) from its employees who depart employment for any reason. The contractor shall return all identification media (i.e., badges and vehicles passes) to the KO within 14 days of an employee’s departure.

1.4.11. Combating Trafficking in Persons: The United States Government has adopted a zero tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not engage in severe forms of trafficking in persons during the period of performance of the contract; procure commercial sex acts during the period of performance of the contract; or use forced labor in the performance of the contract. The Contractor shall notify its employees of the United States Government’s zero tolerance policy, the actions that will be taken against employees for violations of this policy. The contractor shall take appropriate action, up to and including termination, against employees or subcontractors that violate the US Government policy as described at

FAR 22.17.

1.4.12. Reserved

1.4.13 Data Rights The Government has unlimited rights to all documents/materials produced under this contract. All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the contractor without written permission from the KO. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

1.4.14 Organizational Conflicts of Interest (OCI): The contractor and subcontractor personnel performing services under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent OCIs, as defined in FAR Subpart 9.5. The contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI. The contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the KO. In the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may impose other remedies as he or she deems necessary, including prohibiting the contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.4.15 Reserved

2.0 Definitions and Acronyms:

2.1 Definitions:

2.1.1 Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

2.1.2 Defective Service: A service output that does not meet the standard of performance associated with the PWS.

2.1.3 Deliverable: Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

2.1.4 Key Personnel: Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.5 Physical Security: Actions that prevent the loss or damage of Government property.

2.1.6 Quality Assurance: The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.7 Quality Assurance Surveillance Plan (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.8 Quality Control: All necessary measures taken by the Contractor to ensure that the quality of an end product or service shall meet contract requirements.

2.1.9 Subcontractor: One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.2 Acronyms:

AEI Army Enterprise Infostructure AR Army Regulation AT/OPSEC Antiterrorism/Operational Security BI Background Investigation CM Contract Manager

COR Contracting Officer Representative DA Department of the Army DD254 Department of Defense Contract Security Classification Specification DFARS Defense Federal Acquisition Regulation Supplement DoD Department of Defense DSCA Defense Counterintelligence and Security Agency FAR Federal Acquisition Regulation GFP/M/E/S Government Furnished Property/Material/Equipment/Services HQDA Headquarters, Department of the Army HSPD Homeland Security Presidential Directive IA Information Assurance IS Information System(s) KO Contracting Officer NGB National Guard Bureau OCI Organizational Conflict of Interest PII Personally Identifiable Information PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program SCR Service Contract Reporting SSN Social Security Number TE Technical Exhibit USPFO United States Property and Fiscal Office USD(I) Under Secretary of Defense for Intelligence

3.0 Government Furnished Property, Material, Equipment and Services (GFP/M/E/S):

The Government will provide the property, material, equipment, and/or services listed below solely for the purpose of performance under this contract:

3.1 Property: None.

3.2 Materials: None

3.3 Equipment: None

3.4 Services: None.

3.5 Utilities: None

4.0 Contractor Furnished Property, Materials, and Equipment (CFP/M/E): Contractor shall coordinate or furnish transportation asset to transport damaged forklift to transport to repair facility and return the repaired forklift back to the USPFO Warehouse.

Contractor is responsible for providing materials and equipment required to repair and service damaged forklift at repair facility.

4.1 General: Except for those items specifically stated to be Government-Furnished in Paragraph 3.0, the contractor shall furnish everything required to perform these services as indicated in Paragraph 1.1.

5.0 Requirements: The contractor shall:

5.1 Provide personnel, equipment, materials and designated repair facility that is essential to repair damaged forklift to industry and safety standards of operation. The contractor shall at all times maintain adequate workforce for the uninterrupted performance of all tasks defined within this PWS. When hiring personnel, the contractor shall keep in mind that the stability and continuity of the work force are essential.

5.1.1 Repair Forklift damage IAW with the below damage report. Note: the vendor shall not make any other repairs other than what is listed below. Should additional repairs be needed the contractor must immediately contact the government representative and contracting officer.

FORKLIFT DESCRIPTION:

Nomenclature: 26,000 lbs capacity @ 24” LC Pneumatic Tire Forklift Make: Hoist Model: P260 Serial #: 29283

REPAIR DAMAGE DESCRIPTION: Mast frame will have to be partially replaced due to damage and concerns of safety. Chain pully and all hardware must be replaced as well.

Pictures attached below.

List below are the parts that need to be replaced:

61851002 3/4-10 X 1.750 SOCKET SET SCREW(CUP PT)

62160082 JAMNUT 3/4-10 HEX

A00287-1 KEEPER PLATE

A10293 WASHER-SIDE TRUST

A10294 PLUG-SIDE THRUST 3.73 OD

A10309 SHIM - CHAIN ROLLER 2.50 X4.25 X 0.06 th

A10987-2 SPACER, ROLLER

B02570-1 CHAIN ROLLER PIN

B03277-2 ROLLER,CHAIN-ASSEMBLY

B08440-2 ROLLER, TRACK (CR)

F00577 16MM FLAT WASHER, YELLOW ZINC PLATED

F00578 16MM LOCK WASHER

F00692 M16X40 SHCS

M00950 GREASE FITTING 1/8 NPT 45 DEG

M13446 RING, RETAINING - 80mm SHAFT

D01175-1 INNER, WELDMENT

CERTIFICATIONS: Vendor assigned to assess and repair forklift must be a Toyota Certified Technician.

TRANSPORTATION OF FORKLIFT: Forklift is functional and able to move. Vendor must coordinate pick up and drop off of forklift from current site (USPFO Warehouse Yard, 4201 Reedy Creek Road, Raleigh, North Carolina 27607) to another site for repair and return. Vendor must provide licensed and certified operator to load and unload forklift at pick up and destination.

CURRENT PICTURES OF DAMAGED FORKLIFT:

(Driver side view)

(Focusing on the damaged area)

(‘Passenger’ side view)

(Alternate view of the damaged area)

(Top view forklift cab showing other damage)

5.1.1.1 Personnel.

5.1.1.2. Certified Technicians. Personnel assigned to repair or conduct work on the damaged forklift must be a Hoist or Toyota Certified Technician. Contractor shall provide documentation of assigned technicians to Gov’t POC.

5.1.1.3. Forklift Operator. Personnel operating or moving the forklift must be licensed to operate. Gov’t POC may request documentation of personnel operating the damaged forklift.

5.1.2 Equipment. ALL equipment shall be in good operating and mechanical condition and comply with manufacturers recommendations. Gov’t POC may inspect required equipment at any time when in use under this contract. Any equipment found deficient shall be removed from service immediately until faulty conditions have been corrected.

No such removal will reduce the Contractor’s obligation to perform all work required within the time scheduled under this contract.

5.2 Compliance/ Permits

5.2.1 Compliance: All work shall be performed by Qualified and Skilled Personnel with appropriate licenses and/or certification required to operate the appropriate equipment and perform the work required. All work shall be conducted in accordance with all applicable Occupational Safety and Health Administration (OSHA), federal, state, and local safety and health requirements.

5.2.2 Permits: Contractor shall, without additional expense to the Government, be responsible for obtaining any necessary licenses, permits, and letters of certification.

Contractor shall comply with any applicable federal, state, county, and municipal laws, codes, and regulations in connection with the performance of the work specified under this contract.

5.3 Designated Repair Facility. A designated location equipped with tools, equipment and certified personnel for the purpose of diagnosing, fixing and maintaining machinery, specifically the damaged forklift. A designated repair facility is not a residential address.

5.4 Testing/Inspections

5.4.1 Operational Testing is required to be completed in accordance with the manufacture’s recommendations. Before every forklift operation the operator(s) shall, at a minimum, inspect the forklift. Equipment shall not be used until this inspection demonstrates that no corrective action is required.

5.4.2 Load Testing. Load Testing shall be performed at 100 to 110% of the anticipated load for the specified configuration, not to exceed 100% of the manufacturer's load chart at the configuration of the test.

5.5 Damage to Government Property. Contractor is responsible for restoring all Gov’t facilities or structures damaged as a result of the contractor’s operation. Contractor shall also be responsible for any damage to private property or injury to any person as a result of the contractor’s operation. The contractor shall notify the Gov’t POC immediately of damage to Gov’t and private property and injury to any person resulting from the contractor’s operation. Contractor shall replace or repair the damage at no expense to the Gov’t as the Contracting Officer directs. If the contractor fails or refuses to make such repairs or replacement, the contractor shall be liable for the cost, which may be deducted from the contract price, and or additional measures.

6.0 Applicable Publications: Publications applicable to this PWS are listed below:

Publication (Chapter/Page)

Date of Publicatio n

Mandator y or

Advisory

Website

Federal Acquisition Regulation https://www.acquisition.gov/?q=browsefar

Defense Federal Acquisition Regulation

Supplement http://www.acq.osd.mil/dpap/dars/dfarspgi/cu rrent/index.html or https://www.acquisition.gov/dfars DoDM 1000.13-M-V1 DoD Identification (ID)

Cards (Enclosure 2, paragraph

3.b)

01/23/201

(Change 1:

07/28/202 0) http://www.esd.whs.mil/Directives/issuances/ dodm

Federal Information Processing Standards

(FIPS) Publication 201-2 Personal Identity

Verification (PIV) of Federal Employees and

Contractors (paragraph 9)

August http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FI PS.201-2.pdf

DoDM 5200.2 Procedures for the DoD Personnel

Security Program (PSP)

04/03/201 https://www.esd.whs.mil/Directives/issuances /dodm/

Homeland Security

Presidential Directive

(HSPD)-12

Policy for a Common Identification Standard for Federal Employees and

Contractors

08/27/200 https://www.dhs.gov/homeland-security-presidential-directive-12

DoDI 5400.11 Department of Defense

Privacy and Civil Liberties Programs

01/29/201

/dodi/

DoD 5400.11-R Department of Defense

Privacy Program

05/14/200

DoD 8570.01-M Information Assurance

Workforce Improvement Program

12/19/200 5 (Change

4:

11/10/201

5)

DoD 5220.22-M National Industrial Security Program Operating Manual

(NISPOM)

02/28/200

(Change 2:

05/18/201 6)

Army Directive 2014-05 Policy and Implementation Procedures for Common

Access Card Credentialing and Installation Access for

Uncleared Contractors

03/07/201 https://armypubs.army.mil/ProductMaps/Pub Form/ArmyDir.aspx

AR 25-2

Information Assurance

04/04/201 http://armypubs.army.mil/ProductMaps/PubF orm/AR.aspx

AR 530-1

Operations Security

09/26/201 http://armypubs.army.mil/ProductMaps/PubF orm/AR.aspx

AR 525-13

Antiterrorism

12/09/201 http://armypubs.army.mil/ProductMaps/PubF orm/AR.aspx

AR 381-12

Threat Awareness and

Reporting Program (TARP) (Section II, ¶ 2-4.b)

06/01/201 http://armypubs.army.mil/ProductMaps/PubF orm/AR.aspx

6.1 Applicable Forms: Forms applicable to the PWS are listed below:

Form Date Website

DD 441

Department of Defense Security Agreement

Feb 2020 http://www.dtic.mil/whs/directives/forms/dd/ddforms 0001-0499.htm

DD 250

Material Inspection and

Receiving Report

Aug 2000 https://www.esd.whs.mil/Directives/forms/dd0001_0 499/

TECHNICAL EXHIBIT 1

Performance Requirements Summary (PRS)

This PRS includes performance objectives the Government will use to determine contractor performance and will compare contractor performance to the Acceptable Quality Level (AQL).

Performance

Objective Performance Standard Acceptable Quality

Levels (AQL) Surveillance Method /

By Whom 5.1.1

Personnel.

Contractor shall provide qualified and certified personnel to repair and service forklift IAW industry standards

Personnel properly certified and licensed to operate and service forklift

Periodic Inspection / Government

Representative

TECHNICAL EXHIBIT 2

Deliverables Schedule

PWS

Reference /

Deliverable Title

Frequency Number of Copies

Medium/Format Submit To

1.4.5.3 AT Level

1 Awareness

Training Certificates

Provide within 15 calendar days after employee completes training.

1 Electronic Submission

Gov’t POC

1.4.5.4 iWATCH Training

Certificates

Provide within 15 calendar days after employee completes training.

1 Electronic Submission

Gov’t POC

1.4.5.11

OPSEC

Training

Certificates

Provide within 15 calendar days after employee completes training.

1 Electronic Submission

Gov’t POC

5.1.1.1. Certified

Technicians

Provide to Gov’t POC prior to start of repair and servicing

1 Electronic Submission

Gov’t POC

5.4 Designated

Repair Facility

Provide address of where the forklift will be take to be repaired and serviced

1 Electronic Submission

Gov’t POC