W911YU-17-T-4001_Attachment_1_(Requirements_Summary).pdf

W911YU-17-T-4001 ATTACHMENT 1

REQUIREMENTS SUMMARY

Scope. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items necessary for the installation of wall lockers. The contractor shall perform to the standards in the contract as well as comply with all Federal, State, and local laws, and applicable regulations.

REQUIREMENTS AND SPECIFICATIONS

ITEM PRODUCT QTY UNIT

.0001 Three(3)-Tier Tactical Locker 46 Each

Locker must be 42" wide x 30" deep x 96" height and contain three (3) separate individual lockers per unit with each individual locker being 42" wide x 30" deep and approximately 30" height plus or minus one inch.

Each individual locker must have a hasp for padlock AND a keyed lock with a master key that must be able to open all lockers.

Lockers must be fabricated with a minimum 18 gauge steel.

Must be welded frame and door construction.

Must have diamond perforated pattern doors that allow for air circulation/ventilation and visibility.

Lockers must interlock with each other to ensure stability.

Must have full length welded hinge on all doors to ensure strength and security of locker.

Lockers must be painted a light gray color.

Doors must be dual paneled.

Each locker must be sequentially starting with the number 001 through 138 numbered by vendor with a permanent numerical plate.

Lockers must be installed by vendor.

All disposal/removal of packaging and shipping material is vendor responsibility.

DELIVERY SCHEDULE AND ADDRESS

Guam Army National Guard ATTN: SSG Ron Solang A Co 1-294th IN Regiment 430 Army Drive, Bldg 100 Barrigada, GU 96913-4421

W911YU-17-T-4001 ATTACHMENT 1

ADDITIONAL TERMS AND CONDITIONS

1. Item Condition: New items ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

2. Shipping: Shipping must be free on board (FOB) destination OCONUS (OUTSIDE

Continental U.S.), which means that the offeror must deliver the goods on its conveyance to the destination specified and the offeror is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

3. SAM Requirement: This solicitation requires registration with the System for Award

Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

Registration must be "ACTIVE" at the time of award.