Attachments_Salient_Features.pdf

SALIENT FEATURES

Item 1 - Articulating Dump Truck

Item 12 - Articulating Dump Truck (Option)

Articulated Truck

Engine Model Cat® C15 ACERT™ Gross Power – SAE J1995 350 kW 469 hp Net Power – SAE J1349 338 kW 453 hp

Engine Weights

Rated Payload Body Capacities

Heaped SAE 2:1

39.5tonnes 43.5tons

24 m3 31.4 yd3

Engine

Engine Model

Gross Power 350 kW 469 hp

– SAE J1995

Net Power 338 kW 453 hp

– SAE J1349

Net Power 342 kW 458 hp

– ISO 9249

Net Power 342 kW 458 hp

– EEC 80/1269

Sound Levels

Interior Cab 79 dB(A) 1,800 rpm when tested under the conditions for the specified standard.

The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.

Net power when the fan is at maximum speed is 330 kW (442 hp) per the SAE reference conditions.

Weights

Rated Payload 39.5 tonnes 43.5 tons

Body Capacities

Heaped SAE 2:1 24 m 31.4 yd

Struck 18.5 m 24.2 yd

Tailgate Struck 19.5 m 25.5 yd

Tailgate Heaped 2:1 25.5 m 33.5 yd

Operating Weights

Front Axle – Empty 19 400 kg 42,770lb

Center Axle – Empty 7200 kg 15,873lb

Rear Axle – Empty 6500 kg 14,330lb

Total – Empty 33 100 kg 72,973lb Front Axle 5200 kg 11,464lb

– Rated Load

Center Axle 17 150 kg 37,809lb

– Rated Load

Rear Axle 17 150 kg 37,809lb

– Rated Load

Total – Rated Load 39 500 kg 87,083lb

Front Axle – Loaded 24 600 kg 54,234lb

Center Axle 24 350 kg 53,683lb

– Loaded

Rear Axle – Loaded 23 650 kg 52,139lb

Total – Loaded 72 600 kg 160,055lb

Body Hoist

Raise time 12 Seconds

Lower time 7 Seconds

Minimum Engine Specs Transmission

Forward 1 8.9 km/h 5.5 mph

Forward 2 12.1 km/h 7.5 mph

Forward 3 16.4 km/h 10.2 mph

Forward 4 22 km/h 13.7 mph

Forward 5 30 km/h 18.6 mph

Forward 6 40 km/h 25.1 mph

Forward 7 54.7 km/h 34 mph

Reverse 1 8.4 km/h 5.2 mph

Reverse 2 11.6 km/h 7.2 mph

Body Plate Thickness

Front 8 mm 0.31 in

Scow 16 mm 0.63 in

Side 12 mm 0.47 in

Base 16 mm 0.63 in

Service Refill Capacities

Fuel Tank 532 L 140.5 gal

Cooling System 80 L 21.1 gal

Hydraulic System 328 L 86.6 gal

Engine Crankcase 38 L 9.5 gal

Transmission 72 L 19 gal rr The power ratings apply at rated speed of Final Drives/ 72 L 19 gal

1,800 rpm when tested under the conditions for the specified standard.

Differential r The net power advertised is the power available at the flywheel when the engine

(equivalent sound pressure level) measured according to the work cycle procedures

Output Transfer Gear Box

18 L 4.8 gal is equipped with alternator, air cleaner, muffler and fan at minimum speed.

specified in ANSI/SAE J1166 OCT 98 is 79 dB(A), for the cab offered by Caterpillar, Minimum Hoist Times Body Hoist r Net power when the fan is at maximum when properly installed and maintained speed is 330 kW (442 hp) per the SAE reference conditions.

r The 740 meets EPA Tier 3/EU Stage 3a emission specifications for the U.S. and Europe through 2010.

r No engine derating required below 2438 m (8,000 ft.).

Minimum Payload and Capacity

Body Capacities

Heaped SAE 2:1 24 m3 31.4 yd3

Struck 18.5 m3 24.2 yd3

Tailgate Struck 19.5 m3 25.5 yd3

Tailgate Heaped 2:1 25.5 m3 33.5 yd3 and tested with the doors and windows closed.

r Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Maximum Operating Weights Operating Weights

Raise time 12 Seconds

Lower time 7 Seconds

Standards

Brakes ISO 3450 – 1996

Cab/FOPS ISO 3449 Level II

– 2005

Cab/ROPS ISO 3471 – 2008

Steering ISO 5010 – 2007

Rated Payload 39.5 tonnes 43.5 tons

Weights

740 Articulated Truck Specifications

Engine Model

Gross Power

– SAE J1995

Net Power

– SAE J1349

Net Power

– ISO 9249

Net Power

CCaatt®® CC1155 AACCEERRTT™™

350 kW 469 hp

338 kW 453 hp

342 kW 458 hp

342 kW 458 hp

Sound Levels

Interior Cab 79 dB(A) r The operator sound exposure Leq

Front Axle – Empty 19 400 kg 42,770 lb

Center Axle – Empty 7200 kg 15,873 lb

Rear Axle – Empty 6500 kg 14,330 lb

Total – Empty 33 100 kg 72,973 lb

Front Axle

– Rated Load

Center Axle

– Rated Load

Rear Axle

– Rated Load

Total – Rated Load

Front Axle – Loaded

Center Axle

– Loaded

Rear Axle – Loaded

Total – Loaded

5200 kg 11,464lb

17 150 kg 37,809 lb

17 150 kg 37,809 lb

39 500 kg

24 600 kg

24 350 kg

87,083 lb

54,234 lb

53,683lb

23 650 kg

72 600 kg

52,139 lb

160,055lb

– EEC 80/1269

Bore 137 mm 5.4 in

Stroke 171.5 mm 6.75 in

Displacement 15.2 L 926 in3

Dimensions

11996666 44224444

66..44 1133..99 mmmm

1100 888899 fftt

3355..77

14 33882233 1122..55

33223399 669977

1100..66 22..33

All highlighted dimensions are maximum

1 7092 23.4

4 6288 20.6

12 3745 12.3

13** 4049 13.3

5* 5734 18.8 15*** 3705 12.14

6 577 1.8 16 3418 11.2

7 1458 4.7 17 2687 8.8

18 3430 11.2

19**** 3520 11.5 10 3221 10.5

*Inside of body.

**Exhaust stack can be removed for transportation.

***If equipped with a scissor tailgate.

****Max-unladen over tire bulge.

mmmm fftt

1 70°

12 13

33 7 88 99 10

Steering Dimensions are for machines equipped with 29.5R25 tires.

Lock to Lock 4.6 seconds @ 60 rpm

T

Steer angle – left/right 45° SAE turning radius Cl earance radius Inside radius Aisle width

Optimal Loader/Truck Pass Matching

Hydraulic Excavators

P

345D

Wheel Loaders 966H

P 5-6

Turning Circle and Steering Specs are maximum.

Turning Circle Dimensions are for machines equipped with 29.5R25 tires.

Steering

TTuurrnniinngg ddiimmeennssiioonnss Lock to Lock 4.6 seconds @ 60 rpm Steer angle – left/right 45° SAE turning radius 88113388 mmmm 332200..44 iinn Clearance radius 8595 mm 338.4 in Inside radius 44110011 mmmm 116611..55 iinn Aisle width 55669944 mmmm 222244..22 iinn

Alternate equipment must be matched for optimal pass for increased production and lower costs.

Optimal Loader/Truck Pass Matching

Hydraulic Excavators 385C 365C 345D Loader Capacity (Tonnes) – 50 min hr 954-1193 750-1100 665-805 Loader Capacity (Tons) – 50 min hr 1049-1314 825-1210 735-885 Passes 3-4 5 66

Wheel Loaders 988H 980H 972H 966H Loader Capacity (Tonnes) – 50 min hr 565-790 590-650 490-565 400-535 Loader Capacity (Tons) – 50 min hr 625-870 650-717 540-625 440-590 Passes 3-4 4 5 5-6

AAnn ooppttiimmuumm ssyysstteemm mmaattcchh ggiivveess yyoouu aa mmaajjoorr pprroodduuccttiivviittyy aaddvvaannttaaggee.. The 740 is an excellent match for the Cat 385C, 365C and 345D Hydraulic Excavators; and 966H, 972H, 980H and 988H Wheel Loaders. This results in increased production and lower system costs per unit of volume moved.

Gradeability/Speed/Rimpull

To determine performance, ad from Gross Weight down to % Total Resistance. Total Resistance equals actual % grade plus 1% for each 10 kg/metric ton (20 lb/ton) of Rolling Re sistanc Fr om this point, nab le speed rang Then, go down to Maximum Speed. Us ab le Rimpull depends on traction bl

STANDARD*

These Specs are minimum Gradeability/Speed/Rimpull

GROSS WEIGHT

0 20 40 60 80 100 120 140 160 lb x 1000

90 40

45 20

0 0

0 10 20 30 40 50 60 70 80

E L

1A

1B kg x 1000

40%

35%

30%

25%

20%

15%

10%

5%

0 10 20 30 40 50 60

0 5 10 15 20 25 30 35

SPEED

km/h mph

1A – 1st Gear (Converter Drive)

1B – 1st Gear (Direct Drive)

2 – 2nd Gear

3 – 3rd Gear

4 – 4th Gear

5 – 5th Gear

6 – 6th Gear

7 – 7th Gear

E – Empty 33 100 kg (72,973 lb)

L – Loaded 72 600 kg (160,055 lb)

* at sea level

STANDARD*

To determine performance, rreead from Gross Weight down to % Total Resistance. Total Resistance equals actual % grade plus 1% for each 10 kg/metric ton (20 lb/ton) of Rolling Resistance. From this point, reeaadd horizontally to the curve with the highest attttaaiinable speed range.

Then, go down to Maximum Speed. Usable Rimpull depends on traction available.

R

IM

P U

LL

lb x k g x

TO

TA

L R E

SI

ST

A N C E

(G R A D E P

LU

S R O

LL

IN

G R E

SI

ST

A N C E)

Retarding Performance

To determine performance, read from Gross Weight down to % Effective Grade. Effective Grade equals actual % favorable grade plus 1% for each 10 kg/metric ton (20 lb/ton) of Rolling Resistance. From this point, read horizontally to the curve with the highest attainable speed range.

Then, go down to Maximum Speed. Retarding effect on these curves represents full application of the retarder.

GROSS WEIGHT

0 20 40 60 80 100 120 140 160

0 10 20 30 40 50 60 70

180 lb x 1000

80 kg x 1000

1 35% 30% 25%

E L

20%

15%

10%

6 5%

0 10 20 30 40 50 60

0 5 10 15 20 25 30 35 40

SPEED

70 km/h

45 mph

1 – 1st Gear

2 – 2nd Gear

3 – 3rd Gear

4 – 4th Gear

5 – 5th Gear

6 – 6th Gear

7 – 7th Gear

E – Empty 33 100 kg (72,973 lb)

L – Loaded 72 600 kg (160,055 lb)

E

FF

EC

TI

V E G R A D E

(F A V O R A B

LE

Air conditioning with R134A refrigerant Air vents, adjustable

Auto shift seven-speed forward and two speed reverse transmission Back up alarm Body, adapted for exhaust heat

Differentials, standard with clutched cross-axle differential locks for all axles

Electro hydraulic hoist control

Glass windows, laminated and tinted, front Glass windows, toughened and tinted, sides and rear Guards: rear window, radiator, crankcase and axle

Heater and defroster with four-speed fan Horn, electric

Lights: cab interior, front, side, rear, two reversing/working lights, two stop/tail lights, front and rear direction indicators Mirrors, main and auxiliary, left and right

ROPS/FOPS cab, with full instrumentation, including:

Instrument cluster display module Indicator lamps: left turn, secondary transmission fault, park brake, charging system status, differential lock, body not in float, right turn, high beam, transmission hold, machine filter warning, retarder, retarder up shift warning Gauges: engine oil pressure, engine coolant temperature, torque converter oil temperature, fuel level, fuel tank level gauge Meters: service hour meter, speedometer, tachometer

Seat, fully adjustable, air suspension

Seat, padded companion/trainer

Three-axle, six wheel drive

Tilt and telescopic steering wheel

Tow pins, front and rear Two Seat belts, Drivers retractable

Vandalism protection: lockable caps for fuel tank and hydraulic oil tank Windows opening side, tinted Windshield wiper and washer, two speed, intermittent (front) Windshield wiper and washer, two speed, (rear)

Engine Block Heater

Highlighted text represents minimum equipment to be included on Articulating Truck

Standard equipment may vary. Consult your Caterpillar dealer for details

Cat® C15 engine with ACERT™ Technology Caterpillar Work Area Vision System (WAVS) rear-view camera CD/Radio, heavy duty

Electrical system: 24 volt, 5A 24- to 12-volt converter Electro hydraulic hoist control

Mud flaps, wheel arch and body mounted, with transportation tie backs Oil-cooled brakes, enclosed Product Link (US/Canada/Europe/Turkey/ Australia/New Zealand) Retarder, Engine compression brake ROPS/FOPS cab, with full instrumentation, including:

– Instrument cluster display module

– Indicator lamps: left turn, secondary steering, primary steering loss, front and

Secondary steering – electronic S·O·SSM sampling valves Spill guard, front, integral part of fabricated body Starting receptacle, electric, remote Storage – two cup holders, flask receptacle, under seat storage, door pocket, behind seat storage, coat hook.

Sun visor

Tires, 29.5R25, radial

Optional equipment may vary. Consult your Caterpillar dealer for details

Autolube installation for automatic greasing of bearings Bath, oil pre-cleaner Body liners CD/Radio, heavy duty Cold Weather Coolant (–51 degrees C/–59.8 degrees F)

Cold weather start attachment Cycle counter/operator monitoring kit

Exhaust heated body Extensions, fender Fast fuel fill

Flashing Xenon Beacon Fuel Additive – Anti-Waxing Heated rearview mirrors Product Link (Where Available) Tailgate:

– Scissor-type

Engine Block Heater

Ether starting aid Glass windows, laminated and tinted, front Glass windows, toughened and tinted, sides and rear Guards: rear window, radiator, crankcase and axle Headlights, four Heater and defroster with four-speed fan Horn, electric

Three-axle, six wheel drive Tilt and telescopic steering wheel

Differentials, standard with clutched cross-axle differential locks for all axles

Seat, fully adjustable, air suspension Seat, padded companion/trainer

740 Standard Equipment

740 Optional Equipment

Air conditioning with R134A refrigerant Air vents, adjustable Auto shift seven-speed forward and two-speed reverse transmission Back up alarm Body, adapted for exhaust heat

Lights: cab interior, front, side, rear, two reversing/working lights, two stop/tail lights, front and rear direction indicators Mirrors, main and auxiliary, left and right rear brake temp (735/740 and 740 Ejector only), brake oil pressure, action lamp, transmission fault, park brake, charging system status, differential lock, body not in float, right turn, high beam, transmission hold, machine filter warning, retarder, retarder up shift warning

– Gauges: engine oil pressure, engine coolant temperature, torque converter oil temperature, fuel level, fuel tank level gauge

– Meters: service hour meter, speedometer, tachometer

Tow pins, front and rear Two Seat belts, Drivers retractable Vandalism protection: lockable caps for fuel tank and hydraulic oil tank Windows opening side, tinted Windshield wiper and washer, two speed, intermittent (front) Windshield wiper and washer, two speed, (rear)

Item 2 – Bulldozer

D7E Track-Type Tractor

Engine Model Cat® C9.3 ACERT™ Global Emissions U.S. Tier 4 Interim/EU Stage IIIB/

Japan MLIT Step 4

Drive Train

Type Electric Drive Weights

Operating Weight – STD SU 26 055 kg 57,441 lb Operating Weight – LGP S 28 525 kg 62,886 lb Shipping Weight – STD 21 955 kg 48,402 lb Shipping Weight – LGP 24 335 kg 53,649 lb

251 hp 254 hp

187 kW

235 hp 238 hp

175 kW

Engine Power (Maximum)

ISO 14396

ISO 14396 (DIN)

Net Power (Rated)

ISO 9249/SAE J1349

ISO 9249/SAE J1349 (DIN)

Net Power (Maximum)

ISO 9249/SAE J1349

ISO 9249/SAE J1349 (DIN)

198 kW 266 hp 270 hp

Caterpillar is the only manufacturer to offer fully-integrated electronic technology solutions that enable greater accuracy, higher productivity, lower operating costs and more profitability.

Product Link™

Product Link helps take the guesswork out of equipment management with remote monitoring capabilities for your machine or your entire fleet. Track asset location, hours, fuel usage, diagnostic codes, idle time and more through the secure VisionLink™ user interface, powered by Trimble. Knowing where your equipment is, what it’s doing and how it’s performing enables you or your Cat dealer to manage your fleet in real-time so you can maximize efficiency, improve productivity, and lower operating costs.

*Product Link licensing not available in all areas. Please consult your Cat dealer for availability.

AccuGrade

AccuGrade uses positioning and guidance technologies, machine sensors, and automatic blade control to help operators get to grade faster, easier and more efficiently. Digital design plans, real-time cut/fill data, and in-cab guidance give operators detailed information to work more confidently and achieve greater accuracy, in fewer passes, using less material. Operators can stay on grade and improve productivity and accuracy by nearly 50 percent over conventional methods. Grade stakes and checkers are minimized, making the work site safe, efficient, and cost effective. AccuGrade technologies include Cross Slope, Sonic, Laser, GPS, and/or Universal Total Station (UTS).

Integrated Technologies Solutions to make work easier and more efficient

Engine Power (Maximum)

ISO 14396 (DIN) 270 hp

Net Power (Rated)

SAE J1349

238 hp

SAE J1349 (DIN)

Net Power (Maximum)

SAE J1349

ISO 9249/

SAE J1349 (DIN)

Engine

Weights

Shipping Weight includes lubricants, coolant, ROPS/FOPS cab, standard track coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.

Japan MLIT Step 4

Engine Power (Maximum)

SSAAEE JJ11999955 220011 kkWW 227700 hhpp

IISSOO 1144339966 119988 kkWW 226666 hhpp

ISO 14396 (DIN) 270 hp

Net Power (Rated)

IISSOO 99224499//

SAE J1349

IISSOO 99224499//

SAE J1349 (DIN)

117755 kkWW 223355 hhpp

238 hp

Net Power (Maximum)

SShhiippppiinngg WWeeiigghhtt 2211 995555 kkgg 4488,,440022 llbb

OOppeerraattiinngg WWeeiigghhtt –– 2266 005555 kkgg 5577,,444411 llbb

SSTTDD SSUU

Engine Model Cat® C9.3 ACERT™ Fuel Tank 409 L 108 gal

Global Emissions U.S. Tier 4 Interim/ Cooling System 87 L 22.5 gal Pressure Setting – 27 600 kPa 4,000 psi

EU Stage IIIB/ Engine Crankcase 30 L 8 gal Steering Powertrain 60 L 16 gal • Rated Implement Pump Speed 2,000 rpm.

Final Drives (each) 28 L 7 gal • Rated Steering Pump Speed 2,500 rpm.

Compartment Bulldozer 27 600 kPa 4,000 psi Hydraulic Tank 76 L 20 gal Tilt Cylinder 27 600 kPa 4,000 psi Maximum Weight Specs Weights Ripper (Lift) 27 600 kPa 4,000 psi

Ripper (Pitch) 27 600 kPa 4,000 psi

Steering 41 000 kPa 5,950 psi

Operating Weight – 28 525 kg 62,886 lb

LGP S

Shipping Weight – 24 335 kg 53,649 lb

Type Multi-Shank

Number of Pockets 3

Bore 115 mm 4.5 in LGP Overall Beam Width 2088 mm 82.2 in Stroke 149 mm 5.9 in

Displacement 9.3 L 567 in3

• Maximum Engine Power at 1,600 rpm,

• Shipping Weight includes lubricants, coolant, ROPS/FOPS cab, standard track aanndd 1100%% ffuueell..

Beam Cross Section 355 mm 14.0 in

Maximum Clearance 588 mm 23.1 in Raised (under tip, Rated Net Power at 1,700 rpm, • OOppeerraattiinngg WWeeiigghhtt iinncclluuddeess bbllaaddee,, lluubbrriiccaannttss,, pinned in bottom

Maximum Net Power at 1,450 rpm.

• Net power advertised is the power available coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.

hole)

Maximum 650 mm 25.6 in at the flywheel when engine is equipped Penetration with fan, air cleaner, and muffler. Hydraulic Controls – Pump Maximum 87.4 kN 19,639 lbf

• No derating required up to 3200 m

(10,500 ft) altitude, beyond 3200 m

Pump Output – 312 L/min 82.4 gal/min Penetration Force

(10,500 ft) automatic derating occurs. Steering Pryout Force 234.4 kN 52,695 lbf

• All nonroad U.S. EPA Tier 4, European Pump Output – 200 L/min 52.8 gal/min Weight – with 1650 kg 3,572 lb

Union (EU) Stage IIIB and IV, and Japan Implement One Shank (MLIT) Step 4 certified diesel engines are required to use:

– Ultra Low Sulfur Diesel (ULSD) and

Sulfur-Free fuels that are 15 ppm (mg/kg) sulfur or less.

– Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification.

Lift Cylinder Flow 200 L/min 52.8 gal/min

Ripper Cylinder 200 L/min 52.8 gal/min Flow

Pump Type Piston, Variable Displacement

Tilt Cylinder Flow 93 L/min 24.6 gal/min

– Head End Flow

Tilt Cylinder Flow 66 L/min 17.4 gal/min

– Rod End Flow

Each Additional 150 kg 330 lb Shank

Ramp Angle 26 Degrees

Pocket Spacing 900 mm 35.4 in

Shank Gauge 1800 mm 70.9 in

Shank Section 72 mm × 228 mm

2.8 in × 9.0 in

Ripper

Hydraulic Controls – Maximum Operating Pressure

Final Drive 34 L 9 gal (LGP each)

Pivot Shaft 7 L 1.8 gal

D7E Track‐Type Tractor Specifications

Engine Hydraulic Controls –

Main Relief Valve

IISSOO 99224499//

SAE J1349

118877 kkWW 225511 hhpp

ISO 9249/

SAE J1349 (DIN)

225544 hhpp

Winch

Weight*

Length – STD

24 mm (1 in)

29 mm (1.13 in)

Control

Drum Line Pull

Drum Line Speed

Drum Line Pull

Drum Line Speed

Basic winch weight, mounting arrangement, hydraulic and electrical system weight.

Standards

ROPS/FOPS • Rollover Protective Structure (ROPS) meets the following criteria:

ISO 3471:2008

• Falling Object Protective Structure (FOPS) meets the following criteria:

ISO 3449:2005 Level II

Brakes • Crawler Machine Brake Requirements meets the following criteria:

ISO 10265:2008

Cab ANSI/SAE J1166 OCT98

The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 77 dB(A), and as measured by ISO 6396:

2008 is 75 dB(A), for cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.

Winch

WWiinncchh DDrriivvee HHyyddrraauulliicc

Control EElleeccttrroonniicc//HHyyddrraauulliicc

Min MMaaxxiimmuumm BBaarree Drum Line Pull

440000..33 kkNN 9900,,000000 llbbff

Min MMaaxxiimmuumm BBaarree 2211 mm//mmiinn 7700 fftt//mmiinn Drum Line Speed

Drum Line Speed

Winch Specs Drive Train

Winch and Bracket 1115 mm 93.9 in Length

Winch Case Length 1110 mm 43.7 in

Winch Case Width 826 mm 32.5 in

Max IInnccrreeaasseedd TTrraaccttoorr 11003322 mmmm 9933..99 iinn Length – STD

• Falling Object Protective

Structure (FOPS) meets the following criteria:

ISO 3449:2005 Level II

Brakes • Crawler Machine Brake Requirements meets

Voltage

AC Compressor 12 Amps Maximum Input Current

Electric Water Pump 320 Volts System Nominal Input Voltage the following criteria:

Increased Tractor 1032 mm 93.9 in Length – LGP

Drum Diameter 318 mm 12.5 in

Drum Width 226 mm 8.9 in Flange Diameter 610 mm 24 in

ISO 10265:2008

Cab ANSI/SAE J1166 OCT98

• The operator sound exposure Leq (equivalent sound pressure level) measured

Electric Water Pump 5 Amps System Nominal Input Current

AC Generator and 480 Volts Propulsion Module according to the work cycle procedures

Min DDrruumm CCaappaacciittyy –– 6622 mm 220033 fftt 24 mm (1 in)

Min DDrruumm CCaappaacciittyy –– 5566 mm 118855 fftt 29 mm (1.13 in)

Ferrule Size 60 mm × 65 mm (O.D. × Length) 2.38 in × 2.56 in

Max IInnssttaalllleedd WWeeiigghhtt 11552200 kkgg 33,,335500 llbb

Winch Length 1115 mm 43.9 in

Overall Width 1090 mm 43 in

Throat Clearance 218 mm 8.6 in

Rope Diameter (recommended)

25 mm 1 in

Cable Ferrule Size 60 mm × 65 mm (O.D. × Length) 2.38 in × 2.56 in specified in ANSI/SAE J1166 OCT98 is 77 dB(A), and as measured by ISO 6396:

2008 is 75 dB(A), for cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.

• Hearing protection may be needed when operating with an open cab (when not properly maintained or doors/windows open) for extended periods and noisy environment.

• The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 80 dB(A).

Voltage

• Nominal current dependent on heat/ humidity loading on HVAC unit.

• Measured with water pump operating speed of 4,400 rpm. Measurement is 1 Amp with the water pump operating speed of 2,100 rpm.

Min MMaaxxiimmuumm FFuullll

Drum Line Pull 225533..55 kkNN 5577,,000000 llbbff

Min MMaaxxiimmuumm FFuullll 3355 mm//mmiinn 111166 fftt//mmiinn

** Basic winch weight, mounting arrangement, hydraulic and electrical system weight.

Winch Model PA90 ROPS/FOPS • Rollover Protective Type Electric Drive

Max Weight*

Oil Capacity

11552200 kkgg

12 L

33,,335500 llbb

3.2 gal

Structure (ROPS) meets the following criteria:

ISO 3471:2008

AC Compressor Nominal Input

320 Volts

STD

Width of Tractor without Trunnions (std. shoes)

With the following attachments add to basic tractor length:

Winch

Ground Contact Area (std. shoes) 3.68 m 5,698 in

Ground Pressure

SU Blade

All dimensions are approximate

Min 7 Max 8

Max

Max

Max

Max

6 Min

STD LGP

1 TTrraacckk GGaauuggee 11998811 mmmm Max 7788 iinn 2286 mm 90 in

2 Width of Tractor over Trunnions 2880 mm 113 in 3423 mm 135 in

Width of Tractor without Trunnions (std. shoes) 2591 mm Max 102 in 3200 mm 126 in

3 Machine Height from Tip of Grouser Top of Stack 3365 mm 132 in 3365 mm 132 in

Top of Standard Cab 3392 mm 134 in 3392 mm 134 in

From Ground Face of Shoe 3322 mm 131 in 3322 mm 131 in

4 LLeennggtthh ooff TTrraacckk oonn GGrroouunndd 33001166 mmmm 111199 iinn 3450 mm 136 in

5 LLeennggtthh ooff BBaassiicc TTrraaccttoorr 44660088 mmmm Max 118811 iinn 4608 mm 181 in

With the following attachments add to basic tractor length:

Ripper (with tip at ground line) 1391 mm 55 in N/A

Ripper (with tip fully raised) 1222 mm 48 in N/A

Winch 1032 mm Max 41 in 1032 mm 41 in

Drawbar 270 mm 10.6 in 270 mm 10.6 in

S Blade 977 mm 38 in N/A

SU Blade 1187 mm Max 47 in N/A

U Blade 1425 mm 56 in N/A

A Blade 1230 mm 48 in 1230 mm 48 in

6 Height of Grouser 70 mm 2.75 in 70 mm 2.75 in

7 GGrroouunndd CClleeaarraannccee 447722 mmmm Min 1188..66 iinn 472 mm 18.6 in

Ground Contact Area (std. shoes) 3.68 m2 5,698 in2

6.31 m2 9,792 in2

Number of Shoes per Side 40 44

Standard Shoe Width and Type 610 mm 24 in 915 mm 36 in

MS MS

Ground Pressure 69.5 kPa Min 10.1 psi 44.3 kPa 6.4 psi

Pitch 215.9 mm 8.5 in 215.9 mm 8.5 in

Track Rollers/Side 7 8

Number of Carrier Rollers 2 2

8 Drawbar Height (grouser tip to center of clevis) 719 mm 28 in 719 mm 28 in

Blade

Blade Capacity (SAE J1265) yd

7SU

6.86

8.98

Width (over end bits)

Height

Digging Depth

Ground Clearance

Maximum Tilt

Shoe Width 610 mm 24 in

Track Gauge 1981 mm 78 in

Length of Track on Ground (Heavy Duty) 3016 mm 119 in

Ground Contact Area (Heavy Duty) 3.68 m 5,698 in

Ground Pressure (Heavy Duty) 69.5 kPa 10.1 psi

Ground Clearance 472 mm 18.6 in

STD

Type HeavyDutyUndercarriage

Configuration

Type HeavyDutyUndercarriage

Blade

Bulldozer Specifications

Minimum Blade Specs 7A

Blade Capacity (SAE J1265)

7S m33 5.16

7SU

6.86 Min

7U Straight Angled 25° 7S LGP

8.34 5.15 – 5.89 yd33

6.75 8.98 10.91 6.74 – 7.7

Width (over end bits) mmmm 3904 33771133Max 3988 4503 4120 4545 fftt 12.81 1122..1188 13.08 14.77 13.52 14.91

Height mmmm 1363 11552244 1553 1373 1373 1343 fftt 4.5 55

Ground Clearance mmmm iinn

Maximum Tilt mmmm iinn

43.6

41.1

Min

11110088Min 4433..66

998877 Min 3388..99

1108 1120 1120 1264

43.6 44.1 44.1 49.8

1085 695 695 785

42.7 27.4 27.4 30.9

Weight* kg 3504 3832 3806 3790 3790 3970 lb 7,709 8,431 8,373 8,330 8,330 8,734

* Weight includes cylinder mounting, lift cylinder and lines, blade, push arms, trunnions, and cylinder lines (Tilt).

Undercarriage

Configuration STD LGP Number of Rollers (each side) 7 8

Number of Shoes (each side) 40 44

Pitch 216 mm 8.5 in 216 mm 8.5 in

Shoe Width 610 mm Max 24 in 915 mm 36 in

Grouser Height (MS) 70 mm 2.75 in 70 mm 2.75 in

Length of Track on Ground (Heavy Duty) 3016 mm 119 in 3450 mm 136 in

Track Gauge 1981 mm Max 78 in 2286 mm 90 in

Ground Contact Area (Heavy Duty) 3.68 m22 5,698 in22

6.31 m2 9,792 in2

Ground Pressure (Heavy Duty) 69.5 kPa Min 10.1 psi 44.3 kPa 6.4 psi

Ground Clearance 472 mm Min 18.6 in 472 mm 18.6 in

Digging Depth mmmm 586 558866 iinn 23.1 2233..11

5.1 4.5 4.5 4.4

586 711 711 644

23.1 28 28 25.4

Parking Brake

POWERTRAIN

ELECTRICAL

• Alarm, Backup

• Batteries, Maintenance Free (1,000 CCA)

• Heater, Engine Coolant, 120V

• Horn, Forward Warning

OPERATOR ENVIRONMENT

• Cab, Center Post, Integral ROPS/FOPS

• Continuously Variable Speed Control

• Hour Meter, Electronic

• Mirror, Rearview

• Operator Presence

• Pedal, Travel Control

• Seat Belt, Retractable, 76 mm (3 in)

• Speed Recall Button

• Throttle Dial, Electronic with Eco Reverse

• Wipers, Intermittent

• Monitoring System, Electronic, with Coolant, Power Train Oil, and Hydraulic Oil Temperature, Fuel Gauge, Tachometer, Gear Indicator and Diagnostic Functions

• Modular HVAC, Cab Mounted

OTHERSTANDARD EQUIPMENTUNDERCARRIAGE

• Rollers and Idlers, Lifetime Lubricated

• Undercarriage, Heavy Duty

• Front Tow Hook

• Hydraulics, Load Sensing, Dozer Lift and Tilt

• Vandalism Protection for Fluid Compartments and Battery Box

Coolant, Power Train Oil, and Hydraulic Oil Temperature, Fuel Gauge, Tachometer, Gear Indicator and Diagnostic Functions

• Operator Presence

• Pedal, Travel Control

Standard equipment may vary. Consult your Cat dealer for details.

• Aftercooler, Air to Air

• Air Cleaner, Precleaner with Strata

UNDERCARRIAGE

• Guards, End Track Guiding

• Heavy Duty Track

OTHER STANDARD EQUIPMENT

• CD ROM Parts Book

• Cab, Tilt

• Tube Dust Ejector (610 mm/24" Moderate Service) • Engine Enclosures, Perforated

• C9.3 ACERT Engine • Master Link • Front Tow Hook

– EPA/ARB Tier 4 Interim/ • Rollers and Idlers, Lifetime Lubricated • Grade Control Ready EU Stage IIIB/Japan MLIT Step 4

– Certified Engine with Aftertreatment

• Sprocket Rim Segments, Replaceable

• Track Adjusters, Gas Spring Recoil

• Guards, Hinged Bottom

• Guard, Final Drive Flange

• Coolant, Extended Life • Undercarriage,HeavyDuty • Hood, Perforated

• Differential Steering • Hydraulics, Load Sensing, Dozer Lift

• Ecology Drains (Engine Oil, Coolant, ELECTRICAL and Tilt

Hydraulic Oil, Fuel Tank, Powertrain Case)

• Electronic Air Cleaner Service Indicator

• Fan, Hydraulically Driven Demand

• Accessory Power Converter (APC)

• Alarm, Backup

• Batteries, Maintenance Free (1,000 CCA)

• Oil Cooler, Hydraulic

• Oil Cooler, Powertrain

• Product Link (Satellite or Cellular) with High Ambient Capability • Converter, 24V to 12V, 10 Amp • Radiator Doors, Louvered, Double Hinged

• Final Drives, Double Reduction • Heater, Engine Coolant, 120V • Screen, Grill Door Fan

• Generator, AC • Horn, Forward Warning • S·O·S Sampling Ports

• Parking Brake • Vandalism Protection for Fluid

• Power Inverter OPERATOR ENVIRONMENT Compartments and Battery Box

• Propulsion Module • Armrest, Adjustable

• Prescreener • Bidirectional Shift Switch

• Radiator, Core, Aluminum Bar Plate • CB Ready

• Separate Circuit Core, Aluminum Bar Plate • Cab, Center Post, Integral ROPS/FOPS

• Starting Aid, Ether • Continuously Variable Speed Control

• Transmission, Continuously Variable • Controls, Electro-Hydraulic, Pilot

• Turbocharger, Wastegated • Operated with Electronic Deactivation Switch

• Water Separator, Primary Fuel Filter • Foot Supports, Dash

• Hour Meter, Electronic

• Machine Isolation

• Mirror, Rearview

• Modular HVAC, Cab Mounted

• Monitoring System, Electronic, with

• Radio Ready, 12V

• Seat, Cloth, Air Suspension

• Speed Recall Button

• Throttle Dial, Electronic with Eco Reverse

• Wipers, Intermittent

• Seat Belt, Retractable, 76 mm (3 in)

SSttaannddaarrdd EEqquuiippmmeenntt

D7E Standard Equipment

Lights

Basic (6) Lights

OPERATOR ENVIRONMENT

Rear Vision Camera

REAR IMPLEMENTS

Winch Arrangement/Winch Hydraulics

Optional Equipment

Optional equipment may vary. Consult your Cat dealer for details.

MACHINE ARRANGEMENTS

• LGP Arrangement

• EU Regional Package

• Sound Suppression (Europe)

• Stockpile/Woodchip Arrangement

• Waste Handling/Landfill Arrangement

(XL, LGP)

• Arctic/Cold Weather Attachments

• Battery – Heavy Duty (1,400 CCA) or Arctic

• Engine Coolant Heater, 240V

• Fast Fuel

• Fuel Tank – High Capacity (408 L/122 gal)

• Heavy Duty Grill Door, Hinged

• Insulated Clean Emissions Module

• Powertrain Oil Change System

• Remote Disconnect Switch

• Reversible Fan

• Black Hood and Back of Blade

• Converter – 24V to 12V

• Front and Rear Door/Window Screens

• Heated Seat

– Premium (10) HID Lights

– Warning Strobe

• Sliding Rear Window

TRACK

• 610 mm, 660 mm, 914 mm (24", 26", 36")

• Moderate Service, Extreme Service

CONSTRUCTION TECHNOLOGIES

• AccuGrade Ready Installation Arrangement

• AccuGrade Mounting Bracket – Center

• Dual Tilt

GUARDING

• Bottom – Heavy Duty, Sealed

• Fast Fuel

• Final Drive, Sprocket

• Fuel Tank

• Lights

• Track Roller Frame

BLADES

• SU (Semi-universal), U (Universal),

(S) Straight, and Angle Blades

• Sweeps (without canopy)

• Track Guide Guards

• Turbine Precleaner

• Counterweight

• Drawbar

• Implement Towing Arrangement

• Implement Towing Arrangement –

Eject Scraper

• Multi-shank Ripper and Ripper Hydraulics

• Striker Bar

• Winch Arrangement/Winch Hydraulics

REAR IMPLEMENTS

• Rear Vision Camera

• Lights

– Basic (6) Lights

OPERATOR ENVIRONMENT

D7E Optional Equipment

Item 3 & 4 – Hydraulic Excavator with Grade Control (2)

349E L Hydraulic Excavator

Engine Drive

Engine Model Cat® C13 ACERT™ Maximum Travel Speed 4.7 km/h 2.9 mph Net Power – SAE J1349 295 kW 396 hp Maximum Drawbar Pull

Weight

335 kN 75,300 lbf

Minimum Weight 47 800 kg 105,400 lb Maximum Weight 53 300 kg 117,500 lb

Integrated Technologies Solutions that make work easier and more efficient

Cat Grade Control Depth and Slope

This optional system (1) combines traditional machine control and guidance with standard factory-installed and calibrated components, making the system ready to go to work the moment it leaves the factory. The system utilizes internal front linkage sensors – well protected from the harsh working environment – to give operators real-time bucket tip position information, which minimizes the need and cost for traditional grade checking and improves job site safety. It also helps the operator complete jobs in fewer cycles, which means less fuel use. Cat dealers can upgrade the system to full three-dimensional control by adding proven Cat AccuGrade™ positioning technologies, including GPS and Universal Total Station (UTS).

Cat Product Link*

This deeply integrated machine monitoring system is designed to help customers improve their overall fleet management effectiveness. Events and diagnostic codes as well as hours, fuel consumption, idle time, machine location, and other detailed information are transmitted to a secure web application called VisionLink™, which uses powerful tools to communicate to users and dealers.

*Product Link licensing not available in all areas. Please consult your Cat dealer for availability.

Maximum Weight**

Sound Performance

Operator Noise (Closed) – ISO 6396 71 dB(A)

Swing Mechanism

Swing Speed 8.7 rpm

Swing Torque

Drive

Maximum Travel Speed

Maximum Drawbar Pull

Net Power – SAE J1349

Gross Power – SAE J1995

Engine Model Cat C13 ACERT

Net Power – SAE J1349 295 kW 396 hp

Gross Power – SAE J1995 322 kW 432 hp

Bore 130 mm 5.12 in

Stroke 157 mm 6.18 in

Displacement 12.5 L 763 in3

Minimum Weight* 47 800 kg 105,400 lb

*6.9 m (22'8") HD Reach boom, R3.35TB (11'0") HD stick, 9.0 mt (9.9 t) counterweight, Long FIX undercarriage, 3.1 m3 (4.1 yd3) bucket, 600 mm (24") DG shoes.

**6.55 m (21'6") Mass boom, M3.0UB (9'10") HD stick, 9.0 mt (9.9 t) counterweight, Long VG undercarriage, 3.2 m3 (4.2 yd3) bucket, 900 mm (35") TG shoes.

Main System – Maximum Flow (Total) 770 L/min 203 gal/min

Swing System – Maximum Flow 385 L/min 102 gal/min

Maximum Pressure – Equipment 35 000 kPa 5,076 psi

Minimum Swing Mechanism Specs Swing Mechanism

Fuel Tank Capacity 720 L 190 gal

Cooling System 50 L 13.2 gal

Engine Oil (with filter) 43 L 11.4 gal

Swing Drive (each) 10 L 2.6 gal

Final Drive (each) 15 L 4.0 gal

Hydraulic System (including tank) 570 L 150.6 gal

Hydraulic Tank 407 L 107.5 gal

Track

Number of Shoes (each side)

Long Fix Undercarriage 52

Long Variable Gauge Undercarriage 52

Number of Track Rollers (each side)

Long Fix Undercarriage 9

Long Variable Gauge Undercarriage 9

Number of Carrier Rollers (each side)

Maximum Pressure – Equipment (Lift mode)

38 000 kPa 5,512 psi Long Fix Undercarriage 2

Long Variable Gauge Undercarriage 3

Maximum Pressure – Travel 35 000 kPa 5,076 psi

Maximum Pressure – Swing 27 500 kPa 3,989 psi

Pilot System – Maximum Flow 27 L/min 7.1 gal/min

Pilot System – Maximum Pressure 4120 kPa 598 psi

Boom Cylinder – Bore 170 mm 6.69 in

Boom Cylinder – Stroke 1524 mm 60.00 in

Stick Cylinder – Bore 190 mm 7.48 in

Spectator Noise – ISO 6395 106 dB(A)

• When properly installed and maintained, the cab offered by Caterpillar, when tested with doors and windows closed according to ANSI/SAE J1166 OCT98, meets OSHA and MSHA requirements for operator sound exposure limits in effect at time of manufacture.

• Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in noisy environment.

Brakes ISO 10265

Cab/FOGS SAE J1356

Cab/ROPS ISO 12117-2

Operator Noise (Closed) – ISO 6396 71 dB(A)

Maximum Sound Levels Sound Performance

Swing Speed

Swing Torque

8.7 rpm

148.5 kN·m 109,500 lbf-ft

Hydraulic System

Maximum Weight** 53 300 kg 117,500 lb

Maximum Weights Weights

349E L Hydraulic Excavator Specifications

Minimum Drive Specs Drive

Maximum Travel Speed

Maximum Drawbar Pull

4.7 km/h

335 kN

2.9 mph

75,300 lbf

Stick Cylinder – Stroke 1758 mm 69.21 in

TB Family Bucket Cylinder – Bore 160 mm 6.30 in

TB Family Bucket Cylinder – Stroke 1356 mm 53.39 in

UB Family Bucket Cylinder – Bore 170 mm 6.69 in UB Family Bucket Cylinder – Stroke 1396 mm 54.96 in

Dimensions – Long FIX Undercarriage

900 mm (35") Shoes 3640 (11'11")

510 (1'8")

2740 (9'0")

Transport Width

LongReachBoom 7.4m (24'3")

Stick LR4.3TB (14'1") mm(ft)

Dimension Specs

All dimensions are approximate.

1 Shipping Height to Boom 3690 (12'1") 3670 (12'1") 3730 (12'3") 4020 (13'2") 3980 (13'1")

Shipping Height with Guard Rail 3610 (11'10") 3610 (11'10") 3610 (11'10") 3610 (11'10") 3610 (11'10")

2 Shipping Length 12 420 (40'9") 11 930 (39'2") 11 920 (39'1") 11 590 (38'0") 11 680 (38'4")

3 Tail Swing Radius 3760 (12'4") 3760 (12'4") 3760 (12'4") 3760 (12'4") 3760 (12'4")

4 Length to Center of Rollers 4360 (14'4") 4360 (14'4") 4360 (14'4") 4360 (14'4") 4360 (14'4")

5 Track Length 5370 (17'7") 5370 (17'7") 5370 (17'7") 5370 (17'7") 5370 (17'7")

66 GGrroouunndd CClleeaarraannccee ((iinncclluuddiinngg SShhooee LLuugg HHeeiigghhtt))Minimum510 (1'8") 510 (1'8") 510 (1'8") 510 (1'8") 510 (1'8")

77 TTrraacckk GGaauuggee Maximum 88 Transport Width

2740 (9'0") 2740 (9'0") 2740 (9'0") 2740 (9'0") 2740 (9'0")

600 mm (24") Shoes 3340 (11'0") 3340 (11'0") 3340 (11'0") 3340 (11'0") 3340 (11'0")

750 mm (30") Shoes 3490 (11'5") 3490 (11'5") 3490 (11'5") 3490 (11'5") 3490 (11'5")

900 mm (35") Shoes Maximum 3640 (11'11") 3640 (11'11") 3640 (11'11") 3640 (11'11") 3640 (11'11")

9 Cab Height 3220 (10'7") 3220 (10'7") 3220 (10'7") 3220 (10'7") 3220 (10'7")

Cab Height with Top Guard 3390 (11'1") 3390 (11'1") 3390 (11'1") 3390 (11'1") 3390 (11'1")

10 Counterweight Clearance 1280 (4'2") 1280 (4'2") 1280 (4'2") 1280 (4'2") 1280 (4'2")

LongReachBoom

7.4 m (24'3")

LR4.3TB

(14'1") mm(ft)

HDReachBoom 6.9m (22'8")

MassBoom 6.55m (21'6")

Stick R3.9TB (12'10") mm(ft)

R3.35TB

(11'0") mm(ft)

M3.0UB

(9'10") mm (ft)

M2.5UB

(8'2") mm(ft) n

1 9

Max77 Max 88

66Mi

7.4m (24'3")

LR4.3TB

(14'1")

Stick mm(ft)

Long FIX Undercarriage

Maximum Digging Depth 8910 (29'3")

Maximum Reach at Ground Level 12 940 (42'5")

Maximum Vertical Wall Digging Depth 6480 (21'3")

Working Ranges

LongReachBoom 7.4m (24'3")

HDReachBoom 6.9m (22'8")

MassBoom 6.55m (21'6")

Minimum Working Ranges Specs Working Ranges

Feet Meters

11 11 35 35

10 10

30 9 30 9

20 6

10 3

1 5

20 6

5 5

0 0

Min 22

0 0

LR4.3TB 1

R3.9TB With Quick Coupler 5

R3.9TB Without Quick Coupler

M3.0UB Without Quick Coupler

M2.5UB Without Quick Coupler

11 77 Min R3.35TB With Quick Coupler

6 R3.35TB Without Quick Coupler 10 3

1 7 6

20 6 20 6

7 7 25 25

8 8

30 9 13 12 11 10 9 8 7 6 5 4 3 2 1 0 1 Meters

30 9 12 11 10 9 8 7 6 5 4 3 2 1 0 1 Meters

45 40 35 30 25 20 15 10 5 0 Feet 40 35 30 25 20 15 10 5 0 Feet

Stick LR4.3TB R3.9TB R3.35TB M3.0UB M2.5UB

(14'1") (12'10") (11'0") (9'10") (8'2") mm (ft) mm (ft) mm (ft) mm (ft) mm (ft)

Long FIX Undercarriage

11 Maximum Digging Depth Minimum 8910 (29'3") 8180 (26'10") 7630 (25'0") 7230 (23'9") 6730 (23'1")

22 Maximum Reach at Ground Level Minimum 12 940 (42'5") 12 120 (39'9") 11 710 (38'5") 11 200 (36'9") 10 740 (35'3")

3 Maximum Cutting Height 11 160 (36'7") 10 730 (35'2") 10 810 (35'6") 10 300 (33'10") 10 110 (33'2")

4 Maximum Loading Height 7890 (25'11") 7450 (24'5") 7460 (25'6") 6820 (22'5") 6620 (21'9")

5 Minimum Loading Height 2250 (7'5") 2230 (7'4") 2780 (9'1") 2650 (8'8") 3150 (10'4")

6 Maximum Depth Cut for 2440 mm (8'0") 8790 (28'10") 8050 (26'5") 7490 (24'7") 7080 (23'3") 6560 (21'6") Level Bottom

77 Maximum Vertical Wall Digging Depth Minimum

6480 (21'3")

5890 (19'4") 5760 (18'11") 4570 (15'0") 4140 (13'7")

Long FIX Undercarriage

Long Reach Boom – 7.4 m (24'3")

LR4.3TB HD (14'1")

900mm(35")

Maximum Weights and Ground Pressure Specs OOppeerraattiinngg WWeeiigghhtt aanndd GGrroouunndd PPrreessssuurree

HD Reach Boom – 6.9 m (22'8")

R3.9TB HD (12'10") 49 500 (109,100) 57.0 (8.3) 48 800 (107,600) 68.0 (9.9) 48 100 (106,000) 83.0 (12.0)

R3.35TB HD (11'0") 49 200 (108,500) 57.0 (8.3) 48 500 (106,900) 67.0 (9.7) 47 800 (105,400) 83.0 (12.0)

Mass Boom – 6.55 m (21'6") M3.0UB HD (9'10") 50 500 (111,300) 58.0 (8.4) 49 700 (109,600) 69.0 (10.0) 49 100 (108,200) 85.0 (12.3)

M2.5UB HD (8'2") 50 200 (110,700) 58.0 (8.4) 49 500 (109,100) 69.0 (10.0) 48 800 (107,600) 85.0 (12.3)

Long VG Undercarriage Long Reach Boom – 7.4 m (24'3") LR4.3TB HD (14'1") 52 700 (116,200) 61.0 (8.8) 52 000 (114,600) 72.0 (10.4) 51 200 (112,900) 89.0 (12.9)

HD Reach Boom – 6.9 m (22'8")

R3.9TB HD (12'10") 52 200 (115,100) 61.0 (8.8) 51 500 (113,500) 72.0 (10.4) 50 700 (111,800) 88.0 (12.8)

R3.35TB HD (11'0") 52 000 (114,600) 60.0 (8.7) 51 200 (112,900) 71.0 (10.3) 50 500 (111,300) 88.0 (12.8)

Mass Boom – 6.55 m (21'6") M3.0UB HD (9'10") 53 300 (117,500) 62.0 (9.0) 52,500 (115,700) 73.0 (10.6) 51 800 (114,200) 90.0 (13.1)

M2.5UB HD (8'2") 53 000 (116,800) 62.0 (9.0) 52,300 (115,300) 73.0 (10.6) 51 500 (113,500) 90.0 (13.1)

TTrriippllee GGrroouusseerr SShhooeess

750mm(30") Triple Grouser Shoes

600mm(24") DoubleGrouserShoes kkgg ((llbb)) kkPPaa ((ppssii)) kg (lb) kPa (psi) kg (lb) kPa (psi)

Long FIX Undercarriage

LR4.3TB HD (14'1") Maximum5500 000000 ((111100,,220000)) 5588..00 ((88..44)) 49 300 (108,700) 68.0 (9.9) 48 600 (107,100) 84.0 (12.2)

7.4 m(24'3")

LR4.3TB

(14'1") kN(lbf)

Stick

Heavy Duty

Bucket Digging Force (SAE)

Stick Digging Force (SAE)

Bucket and Stick Forces

Stick

TB Linkage

General Duty

LLoonngg RReeaacchh BBoooomm

7.4 m (24'3")

LR4.3TB

kN (lbf)

HD Reach Boom Mass Boom

6.9 m (22'8") 6.55 m (21'6")

R3.9TB R3.35TB M3.0UB M2.5UB

(12'10") (11'0") (9'10") (8'2") kN (lbf) kN (lbf) kN (lbf) kN (lbf)

Bucket Digging Force (SAE) – 237 (53,300) 237 (53,300) 260 (58,500) 260 (58,500)

Stick Digging Force (SAE) – 180 (40,500) 195 (43,800) 205 (46,100) 231 (51,900)

Heavy Duty

Bucket Digging Force (SAE) 223388 ((5533,,550000))

Stick Digging Force (SAE) 116688 ((3377,,880000))

Severe Duty

237 (53,300) 237 (53,300) 260 (58,500) 260 (58,500)

180 (40,500) 195 (43,800) 205 (46,100) 231 (51,900)

Bucket Digging Force (SAE) 236 (53,100) 237 (53,300) 237 (53,300) 255 (57,300) 255 (57,300)

Stick Digging Force (SAE) 168 (37,800) 180 (40,500) 195 (43,800) 204 (45,900) 230 (51,700)

Extreme Duty

Bucket Digging Force (SAE) 236 (53,100) 237 (53,300) 237 (53,300) – –

Stick Digging Force (SAE) 165 (37,100) 180 (40,500) 195 (43,800) – –

CW‐55 Linkage

Bucket Digging Force (SAE) – 204 (45,900) 204 (45,900) – –

Stick Digging Force (SAE) – 169 (38,000) 182 (40,900) – –

Heavy Duty

Bucket Digging Force (SAE) – 212 (47,700) 212 (47,700) 238 (53,500) 238 (53,500)

Stick Digging Force (SAE) – 173 (38,900) 204 (45,900) 197 (44,300) 221 (49,700)

Severe Duty

Bucket Digging Force (SAE) 204 (45,900) 205 (46,100) 205 (46,100) 233 (52,400) 234 (52,400)

Stick Digging Force (SAE) 157 (35,300) 170 (38,200) 184 (41,400) 196 (44,100) 219 (49,200)

Line lb

Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

*Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Minimum Load Capacity Specs 334499EE LL ((LLCC‐‐FFIIXX)) LLoonngg RReeaacchh BBoooomm LLiifftt CCaappaacciittiieess

Load Point Height

Load at Maximum Reach Load Radius Over Front Load Radius Over Side

Boom – 7.4 m (24'3") Counterweight – 9.0 mt (9.9 t) Bucket – None Stick – LR4.3TB (14'1") Shoes – 900 mm (35") triple grouser Heavy Lift Mode – On

11..55 mm//55..00 fftt 33..00 mm//1100..00 fftt 44..55 mm//1155..00 fftt 66..00 mm//2200..00 fftt 77..55 mm//2255..00 fftt 99..00 mm//3300..00 fftt 1100..55 mm//3355..00 fftt m fftt

9.0 m kg **77115500 **77115500 88..9900

30.0 ft lb **1155,,880000 **1155,,880000 2288..8811

7.5 m kg **99770000 88445500 **66995500 **66995500 99..8899

25.0 ft lb **2200,,880000 1188,,005500 **1155,,225500 **1155,,225500 3322..2222

6.0 m kg **1100 110000 88225500 **77335500 66225500 **66990000 66220000 1100..5577

20.0 ft lb **2222,,005500 1177,,770000 **1155,,220000 1133,,770000 3344..5566

4.5 m kg *14 200 *14 200 *12 100 10 600 *10 800 7950 9800 6150 *7100 5650 11.00

15.0 ft lb *30,650 *30,650 *26,200 22,850 *23,450 17,100 *19,750 13,150 *15,550 12,450 36.05

3.0 m kg *23 300 21 050 *16 700 13 850 *13 500 10 000 *11 600 7600 9600 5950 *7400 5300 11.22

10.0 ft lb *49,950 45,500 *36,050 29,950 *29,200 21,600 *25,200 16,350 20,600 12,750 *16,300 11,700 36.80

1.5 m kg *18 950 *18 950 *18 850 12 950 *14 750 9450 11 850 7300 9400 5750 *7950 5200 11.23

5.0 ft lb *44,950 41,750 *40,700 27,900 *31,950 20,400 25,550 15,650 20,200 12,350 *17,450 11,400 36.84

Ground kkgg **1188 115500 **1188 115500 **2200 110000 1122 330000 1155 115500 99005500 1111 555500 77000000 99225500 55660000 88660000 55220000 1111..0033 Line lb *41,800 40,050 *43,500 26,550 32,650 19,500 24,900 15,100 19,850 12,050 18,900 11,450 36.19

–1.5 m kg *12 200 *12 200 *21 750 18 400 *20 400 12 000 14 900 8800 11 400 6850 9150 5550 9000 5450 10.62 –5.0 ft lb *27,500 *27,500 *49,700 39,500 *44,200 25,850 32,000 18,950 24,500 14,750 19,850 12,000 34.81

–3.0 m kg *14 150 *14 150 *17 800 *17 800 *26 050 18 450 *19 800 11 950 14 800 8700 11 350 6800 9850 5950 9.96 –10.0 ft lb *31,600 *31,600 *40,050 *40,050 *56,450 39,600 *42,850 25,700 31,800 18,750 24,400 14,650 21,750 13,150 32.59

–4.5 m kg *24 500 *24 500 *23 450 18 700 *18 150 12 050 *14 400 8800 *11 250 6900 *11 200 6900 9.00 –15.0 ft lb *55,300 *55,300 *50,650 40,250 *39,200 25,950 *30,900 18,950 *24,750 15,350 29.35

–6.0 m kg *25 050 *25 050 *19 250 *19 250 *15 050 12 400 *11 500 9100 *11 150 8900 7.63 –20.0 ft lb *41,100 *41,100 *32,100 26,750 *24,500 20,050 24.68

Always refer to the appropriate Operation and Maintenance Manual for specific product information.

Electric priming pump Automatic engine speed control Standard, economy and high power modes Two-speed travel

Primary fil ter with water separator and water separator indicator switch

Towing eye on base frame Heavy-duty track rollers Track motor guards

UNDERCARRIAGE

CAB

Mirrorpackage

Glass-breaking safety hammer

Height adjustable joystick consoles Neutral lever (lock out) for all controls Travel control pedals with removable hand levers

Laminated glass front upper window and tempered other windows

Boom light

Exterior lights integrated into storage box

Door locks

Cap locks on fuel and hydraulic tanks

Signaling/warning horn Secondary engine shutoff switch Openable skylight for emergency exit Rearview camera

ENGINE

• C13 diesel engine

• Bio diesel capable

• Meets U.S. Tier 4 (Interim) emission standards

• 2300 m (7,500 ft) altitude capability

• Pressurized operator station with positive filtration

• Sliding upper door window

(left-hand cab door)

ELECTRICAL

• 80 amp alternator

• Circuit breaker

• Capability to electrically connect a beacon

LIGHTS

• Side-by-side cooling system

• Radial seal air filter

• Fuel differential indicator switch in fuel line

• 2×6 micron main filters

• 1×10 micron primary fuel line filter

HYDRAULIC SYSTEM

• Regeneration circuit for boom and stick

• Reverse swing dampening valve

• Automatic swing parking brake

• High-performance hydraulic return filter

• Capability of installing HP stackable valve and medium and QC valve

• Capability of installing additional auxiliary pump (up to 80 L/min [21 gal/min]) and circuit

• Capability of installing boom lowering control device and stick lowering check valve

• Capability of installing Cat Bio hydraulic oil

• Removable lower windshield within cab storage bracket

• Coat hook

• Beverage holder

• Literature holder

• Radio with MP3 auxiliary audio port

• Two stereo speakers

• Storage shelf suitable for lunch or toolbox

• Color LCD display with warning, filter/ fluid change, and working hour information

• Adjustable armrest

• Height adjustable joystick consoles

• Neutral lever (lock out) for all controls

• Travel control pedals with removable hand levers

• Capability of installing two additional pedals

• Two power outlets, 10 amp (total)

• Laminated glass front upper window and tempered other windows

UNDERCARRIAGE

• GGrreeaassee LLuubbrriiccaatteedd TTrraacckk GLT4

• Towing eye on base frame

• Heavy-duty track rollers

• Track motor guards

• Cab lights with time delay

SECURITY

• Lockable external tool/storage box

• Cat oonnee kkeeyy sseeccuurriittyy ssyysstteemm

• Door locks

• Cap locks on fuel and hydraulic tanks

• Exterior lights integrated into storage box

• Primary filter with water separator and water separator indicator switch

• Boom light • Glass-breaking safety hammer

•• Mirror package

CAB

349E L Standard Equipment

• Electric priming pump

• Automatic engine speed control

• Standard, economy and high power modes

• Two-speed travel

• Signaling/warning horn

• Secondary engine shutoff switch

• Openable skylight for emergency exit

• Rearview camera

• Cab hatch emergency exit

CAB

• Windshield wiper, lower with washer

• Sunscreen

• Travel alarm

UNDERCARRIAGE

• Long FIX undercarriage:

900 mm (35") triple grouser shoes

• Long Reach 7.4 m (24'3") boom

• Long Reach 4.3 m (14'1") stick

FRONT LINKAGE

• Electric refueling pump with auto shut off

• Starting kit, cold weather, –32° C (–26° F)

• Jump start receptacle

• Quick drains, engine and hydraulic oil

UNDERCARRIAGE

• Long FIX undercarriage:

– 600 mm (24") double grouser shoes

– 750 mm (28") triple grouser shoes

– 900 mm (35") triple grouser shoes

– 600 mm (24") double grouser shoes, PPR2

FRONT LINKAGE

• Bucket linkage, UB family without lifting eye

• Bucket linkage, TB family with lifting eye

• Long Reach 7.4 m (24'3") boom

• Long Reach 4.3 m (14'1") stick

• Heavy Duty 6.9 m (22'8") reach boom

HYDRAULIC SYSTEM – 750 mm (28") triple grouser shoes, PPR2 • Heavy Duty R3.9TB (12'10") stick

• Control pattern quick-changer, two way – 900 mm (35") triple grouser shoes, PPR2 • Heavy Duty R3.35TB (11'0") stick

• Additional circuit • Long VG undercarriage: • Mass 6.55 m (21'6") boom

• Boom and stick lines – 600 mm (24") double grouser shoes, PPR2 • Mass M3.0UB (9'10") stick

• High-pressure line – 750 mm (28") triple grouser shoes, PPR2 • Mass M2.5UB (8'2") stick

• Medium-pressure line – 900 mm (35") triple grouser shoes, PPR2

• Cat quick coupler line – high- and medium-pressure capable

• Guard, full length for long FIX and

VG undercarriage

LIGHTS

• Working lights, cab mounted with time delay

• Quick coupler for high pressure • Guard, heavy-duty bottom • HID lights, cab mounted with time delay

• Tool control system • Center track guiding guard • Halogen boom lights

• Segmented (3 piece) track guiding guard for long FIX and VG undercarriage

• HID boom lights

• Cab hatch emergency exit • Fabricating idler SECURITY

• Seat, high-back air suspension • Casting idler • FOGS, bolt-on with heater and cooling • Guard, cab front, mesh

• Seat, high-back air suspension with heater COUNTERWEIGHT • Guard, vandalism

• Seat, high-back mechanical suspension

• Sunscreen

• 8.6 mt (9.4 t) with counterweight removal device

• Cat MSS (anti-theft device)

• Windshield wiper,…