Salient_Features.pdf

SALIENT FEATURES

Item 1 - Articulating Dump Truck

Item 10 - Articulating Dump Truck (Option)

Articulated Truck

Engine Engine Model Cat® C15 ACERT™ Gross Power – SAE J1995 350 kW 469 hp Net Power – SAE J1349 338 kW 453 hp

Weights Rated Payload 39.5 tonnes 43.5 tons Body Capacities Heaped SAE 2:1 24 m3 31.4 yd3

H7COSKMB

Highlight

H7COSKMB

Highlight

H7COSKMB

Highlight

H7COSKMB

Highlight

740 Articulated Truck Specifications

Engine

Engine Model Cat® C15 ACERT™

Gross Power

– SAE J1995

350 kW 469 hp

Net Power

– SAE J1349

338 kW 453 hp

Net Power

– ISO 9249

342 kW 458 hp

Net Power

– EEC 80/1269

342 kW 458 hp

Bore 137 mm 5.4 in

Stroke 171.5 mm 6.75 in

Displacement 15.2 L 926 in3

The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.

The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.

Net power when the fan is at maximum speed is 330 kW (442 hp) per the SAE reference conditions.

The 740 meets EPA Tier 3/EU Stage 3a emission specifications for the U.S. and Europe through 2010.

No engine derating required below 2438 m (8,000 ft.).

Weights

Rated Payload 39.5 tonnes 43.5 tons

Body Capacities

Heaped SAE 2:1 24 m3 31.4 yd3

Struck 18.5 m3 24.2 yd3

Tailgate Struck 19.5 m3 25.5 yd3

Tailgate Heaped 2:1 25.5 m3 33.5 yd3

Transmission

Forward 1 8.9 km/h 5.5 mph

Forward 2 12.1 km/h 7.5 mph

Forward 3 16.4 km/h 10.2 mph

Forward 4 22 km/h 13.7 mph

Forward 5 30 km/h 18.6 mph

Forward 6 40 km/h 25.1 mph

Forward 7 54.7 km/h 34 mph

Reverse 1 8.4 km/h 5.2 mph

Reverse 2 11.6 km/h 7.2 mph

Sound Levels

Interior Cab 79 dB(A)

The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT 98 is 79 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.

Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Operating Weights

Front Axle – Empty 19 400 kg 42,770 lb

Center Axle – Empty 7200 kg 15,873 lb

Rear Axle – Empty 6500 kg 14,330 lb

Total – Empty 33 100 kg 72,973 lb

Front Axle

– Rated Load

5200 kg 11,464 lb

Center Axle

– Rated Load

17 150 kg 37,809 lb

Rear Axle

– Rated Load

17 150 kg 37,809 lb

Total – Rated Load 39 500 kg 87,083 lb

Front Axle – Loaded 24 600 kg 54,234 lb

Center Axle

– Loaded

24 350 kg 53,683 lb

Rear Axle – Loaded 23 650 kg 52,139 lb

Total – Loaded 72 600 kg 160,055 lb

Body Plate Thickness

Front 8 mm 0.31 in

Scow 16 mm 0.63 in

Side 12 mm 0.47 in

Base 16 mm 0.63 in

Service Refill Capacities

Fuel Tank 532 L 140.5 gal

Cooling System 80 L 21.1 gal

Hydraulic System 328 L 86.6 gal

Engine Crankcase 38 L 9.5 gal

Transmission 72 L 19 gal

Final Drives/ Differential

72 L 19 gal

Output Transfer Gear Box

18 L 4.8 gal

Body Hoist

Raise time 12 Seconds

Lower time 7 Seconds

Standards

Brakes ISO 3450 – 1996

Cab/FOPS ISO 3449 Level II

– 2005

Cab/ROPS ISO 3471 – 2008

Steering ISO 5010 – 2007

Minimum Engine Specs Engine

Engine Model Cat C15 ACERT™ t®

Gross Power 350 kW 469 hp

–– SAE J1995

Net Power 338 kW 453 hp

–– SAE J1349

Net Power 342 kW 458 hp

–– ISO 9249

Net Power 342 kW 458 hp

–– EEC 80/1269

Sound Levels

Interior Cab 79 dB(A)The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.

The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.

Net power when the fan is at maximum speed is 330 kW (442 hp) per the SAE reference conditions.

Maximum Operating WeightsMinimum Payload and Capacity Weights

Rated Payload 39.5 tonnes 43.5 tons

Body Capacities

Heaped SAE 2:1 24 m3 31.4 yd3

Struck 18.5 m3 24.2 yd3

Tailgate Struck 19.5 m3 25.5 yd3

Tailgate Heaped 2:1 25.5 m3 33.5 yd3

Operating Weights p

Front Axle – Empty 19 400 kg 42,770 lb

Center Axle – Empty 7200 kg 15,873 lb

Rear Axle – Empty 6500 kg 14,330 lb

Total – Empty 33 100 kg 72,973 lb

Front Axle 5200 kg 11,464 lb

– Rated Load

Center Axle 17 150 kg 37,809 lb

– Rated Load

Rear Axle 17 150 kg 37,809 lb

– Rated Load

Total – Rated Load 39 500 kg 87,083 lb

Front Axle – Loaded 24 600 kg 54,234 lb

Center Axle 24 350 kg 53,683 lb

– Loaded

Rear Axle – Loaded 23 650 kg 52,139 lb

Total – Loaded 72 600 kg 160,055 lb

Minimum Hoist Times Body Hoist

Raise time 12 Seconds

Lower time 7 Seconds

Dimensions mm ft mm ft 1 7092 23.4 11 10 889 35.7 2 3239 10.6 12 3745 12.3 3 697 2.3 13** 4049 13.3 4 6288 20.6 14 3823 12.5 5* 5734 18.8 15*** 3705 12.14 6 577 1.8 16 3418 11.2 7 1458 4.7 17 2687 8.8 8 1966 6.4 18 3430 11.2 9 4244 13.9 19**** 3520 11.5 10 3221 10.5

* Inside of body.

** Exhaust stack can be removed for transportation.

*** If equipped with a scissor tailgate.

**** Max-unladen over tire bulge.

70°

12 13

7 8 9 10

All highlighted dimensions are maximum

Dimensions

8 9 mm ft mm ft

2 3239 10.6 3 697 2.3

8 1966 6.4 9 4244 13.9

11 10 889 35.7

14 3823 12.5

Turning Circle Steering Dimensions are for machines equipped with 29.5R25 tires.

Turning dimensions Lock to Lock 4.6 seconds @ 60 rpm Steer angle – left/right 45° SAE turning radius 8138 mm 320.4 in Clearance radius 8595 mm 338.4 in Inside radius 4101 mm 161.5 in Aisle width 5694 mm 224.2 in

Optimal Loader/Truck Pass Matching

Hydraulic Excavators 385C 365C 345D Loader Capacity (Tonnes) – 50 min hr 954-1193 750-1100 665-805 Loader Capacity (Tons) – 50 min hr 1049-1314 825-1210 735-885 Passes 3-4 5 6

Wheel Loaders 988H 980H 972H 966H Loader Capacity (Tonnes) – 50 min hr 565-790 590-650 490-565 400-535 Loader Capacity (Tons) – 50 min hr 625-870 650-717 540-625 440-590 Passes 3-4 4 5 5-6

An optimum system match gives you a major productivity advantage. The 740 is an excellent match for the Cat 385C, 365C and 345D Hydraulic Excavators; and 966H, 972H, 980H and 988H Wheel Loaders. This results in increased production and lower system costs per unit of volume moved.

Turning Circle and Steering Specs are maximum.

Alternate equipment must be matched for optimal pass for increased production and lower costs.

Steering Dimensions are for machines equipped with 29.5R25 tires.

Turning dimensionsTT Lock to Lock 4.6 seconds @ 60 rpm

Turning Circle TT

Steer angle – left/right 45° SAE turning radius 8138 mm 320.4 in Clearance radius 8595 mm 338.4 in Inside radius 4101 mm 161.5 in Aisle width 5694 mm 224.2 in

Optimal Loader/Truck Pass Matching

Hydraulic Excavators

Passes 6

345D

Wheel Loaders 966H

Passes 5-6

An optimum system match gives you a major productivity advantage. T

0 5 10 15 20 25 30 35

0 10 20 30 40 50 60

40% 35% 30% 25% 20% 15% 10%

5%

1A

1B

4 5 6

E L

20 40 60 80 100 120 140 160

0 10 20 30 40 50 60 70 80

Gradeability/Speed/Rimpull

To determine performance, read from Gross Weight down to % Total Resistance. Total Resistance equals actual % grade plus 1% for each 10 kg/metric ton (20 lb/ton) of Rolling Resistance. From this point, read horizontally to the curve with the highest attainable speed range.

Then, go down to Maximum Speed. Usable Rimpull depends on traction available.

STANDARD*

GROSS WEIGHT

lb x kg x

0 lb x 1000 kg x 1000

RI

M

PU

LL

TO

TA

L

RE

SI

ST

A N

CE

(G

RA

D E

PL

U

S

RO

LL

IN

G R

ES

IS

TA

N

CE

km/h mph

SPEED

1A – 1st Gear (Converter Drive) 1B – 1st Gear (Direct Drive) 2 – 2nd Gear 3 – 3rd Gear 4 – 4th Gear 5 – 5th Gear 6 – 6th Gear

7 – 7th Gear

E – Empty 33 100 kg (72,973 lb) L – Loaded 72 600 kg (160,055 lb)

* at sea level

These Specs are minimum Gradeability/Speed/Rimpull

To determine performance, read from Gross Weight down to % Total Resistance. Total Resistance equals actual % grade plus 1% for eachp g q g p 10 kg/metric ton (20 lb/ton) of Rolling Resistance. From this point, read horizontally to the curve with the highest attainable speed range.g ( ) g p Then, go down to Maximum Speed. Usable Rimpull depends on traction availabla e.

STANDARD*

0 5 10 15 20 25 30 35 40

0 10 20 30 40 50 60

0 10 20 30 40 50 60 70

0 20 40 60 80 100 120 140 160

35% 25%

20%

15%

10%

5%

E L

30%

Retarding Performance

To determine performance, read from Gross Weight down to % Effective Grade. Effective Grade equals actual % favorable grade plus 1% for each 10 kg/metric ton (20 lb/ton) of Rolling Resistance. From this point, read horizontally to the curve with the highest attainable speed range.

Then, go down to Maximum Speed. Retarding effect on these curves represents full application of the retarder.

GROSS WEIGHT

lb x 1000 kg x 1000

E

FF

EC

TI

VE

G

RA

D E

(F

AV

O

RA

B

LE

km/h mph

SPEED

1 – 1st Gear 2 – 2nd Gear 3 – 3rd Gear 4 – 4th Gear 5 – 5th Gear 6 – 6th Gear 7 – 7th Gear

E – Empty 33 100 kg (72,973 lb) L – Loaded 72 600 kg (160,055 lb)

740 Standard Equipment

Air conditioning with R134A refrigerant Air vents, adjustable Auto shift seven-speed forward and two-speed reverse transmission Back up alarm Body, adapted for exhaust heat Cat® C15 engine with ACERT™ Technology Caterpillar Work Area Vision System (WAVS) rear-view camera CD/Radio, heavy duty Differentials, standard with clutched cross-axle differential locks for all axles Electrical system: 24 volt, 5A 24- to 12-volt converter Electro hydraulic hoist control Ether starting aid Glass windows, laminated and tinted, front Glass windows, toughened and tinted, sides and rear Guards: rear window, radiator, crankcase and axle Headlights, four Heater and defroster with four-speed fan Horn, electric

Lights: cab interior, front, side, rear, two reversing/working lights, two stop/tail lights, front and rear direction indicators Mirrors, main and auxiliary, left and right Mud flaps, wheel arch and body mounted, with transportation tie backs Oil-cooled brakes, enclosed Product Link (US/Canada/Europe/Turkey/ Australia/New Zealand) Retarder, Engine compression brake ROPS/FOPS cab, with full instrumentation, including:

– Instrument cluster display module

– Indicator lamps: left turn, secondary steering, primary steering loss, front and rear brake temp (735/740 and 740 Ejector only), brake oil pressure, action lamp, transmission fault, park brake, charging system status, differential lock, body not in float, right turn, high beam, transmission hold, machine filter warning, retarder, retarder up shift warning

– Gauges: engine oil pressure, engine coolant temperature, torque converter oil temperature, fuel level, fuel tank level gauge

– Meters: service hour meter, speedometer, tachometer

Seat, fully adjustable, air suspension Seat, padded companion/trainer Secondary steering – electronic S·O·SSM sampling valves Spill guard, front, integral part of fabricated body Starting receptacle, electric, remote Storage – two cup holders, flask receptacle, under seat storage, door pocket, behind seat storage, coat hook.

Sun visor Three-axle, six wheel drive Tilt and telescopic steering wheel Tires, 29.5R25, radial Tow pins, front and rear Two Seat belts, Drivers retractable Vandalism protection: lockable caps for fuel tank and hydraulic oil tank Windows opening side, tinted Windshield wiper and washer, two speed, intermittent (front) Windshield wiper and washer, two speed, (rear)

Standard equipment may vary. Consult your Caterpillar dealer for details

740 Optional Equipment

Autolube installation for automatic greasing of bearings Bath, oil pre-cleaner Body liners CD/Radio, heavy duty Cold Weather Coolant (–51 degrees C/–59.8 degrees F)

Cold weather start attachment Cycle counter/operator monitoring kit Engine Block Heater Exhaust heated body Extensions, fender Fast fuel fill

Flashing Xenon Beacon Fuel Additive – Anti-Waxing Heated rearview mirrors Product Link (Where Available) Tailgate:

– Scissor-type

Optional equipment may vary. Consult your Caterpillar dealer for details

Highlighted text represents minimum equipment to be included on Articulating Truck

Air conditioning with R134A refrigerant Air vents, adjustable Auto shift seven-speed forward and two-speed reverse transmission Back up alarm Body, adapted for exhaust heat

Differentials, standard with clutched cross-axle differential locks for all axles

Electro hydraulic hoist control

Glass windows, laminated and tinted, front Glass windows, toughened and tinted, sides and rear Guards: rear window, radiator, crankcase and axle Headlights, Heater and defroster with four-speed fan Horn, electric

Lights: cab interior, front, side, rear, two reversing/working lights, two stop/tail lights, front and rear direction indicators Mirrors, main and auxiliary, left and right

ROPS/FOPS cab, with full instrumentation, including:

– Instrument cluster display module

– Indicator lamps: left turn, secondary steering, primary steering loss, brake oil pressure, action lamp, transmission fault, park brake, charging system status, differential lock, body not in float, right turn, high beam, transmission hold, machine filter warning, retarder, retarder up shift warning

– Gauges: engine oil pressure, engine coolant temperature, torque converter oil temperature, fuel level, fuel tank level gauge

– Meters: service hour meter, speedometer, tachometer

Seat, fully adjustable, air suspension Seat, padded companion/trainer

Three-axle, six wheel drive Tilt and telescopic steering wheel

Tow pins, front and rear Two Seat belts, Drivers retractable Vandalism protection: lockable caps for fuel tank and hydraulic oil tank Windows opening side, tinted Windshield wiper and washer, two speed, intermittent (front) Windshield wiper and washer, two speed, (rear)

Engine Block Heater

Item 2 – Bulldozer

D7E Track-Type Tractor

Engine Engine Model Cat® C9.3 ACERT™ Global Emissions U.S. Tier 4 Interim/EU Stage IIIB/

Japan MLIT Step 4 Engine Power (Maximum)

ISO 14396 198 kW 266 hp ISO 14396 (DIN) 270 hp

Net Power (Rated) ISO 9249/SAE J1349 175 kW 235 hp ISO 9249/SAE J1349 (DIN) 238 hp

Net Power (Maximum) ISO 9249/SAE J1349 187 kW 251 hp ISO 9249/SAE J1349 (DIN) 254 hp

Drive Train Type Electric Drive Weights Operating Weight – STD SU 26 055 kg 57,441 lb Operating Weight – LGP S 28 525 kg 62,886 lb Shipping Weight – STD 21 955 kg 48,402 lb Shipping Weight – LGP 24 335 kg 53,649 lb

H7COSKMB

Highlight

H7COSKMB

Highlight

Integrated Technologies Solutions to make work easier and more efficient

Caterpillar is the only manufacturer to offer fully-integrated electronic technology solutions that enable greater accuracy, higher productivity, lower operating costs and more profi tability.

AccuGrade AccuGrade uses positioning and guidance technologies, machine sensors, and automatic blade control to help operators get to grade faster, easier and more efficiently. Digital design plans, real-time cut/fill data, and in-cab guidance give operators detailed information to work more confidently and achieve greater accuracy, in fewer passes, using less material. Operators can stay on grade and improve productivity and accuracy by nearly 50 percent over conventional methods. Grade stakes and checkers are minimized, making the work site safe, efficient, and cost effective. AccuGrade technologies include Cross Slope, Sonic, Laser, GPS, and/or Universal Total Station (UTS).

Product Link™ Product Link helps take the guesswork out of equipment management with remote monitoring capabilities for your machine or your entire fleet. Track asset location, hours, fuel usage, diagnostic codes, idle time and more through the secure VisionLink™ user interface, powered by Trimble. Knowing where your equipment is, what it’s doing and how it’s performing enables you or your Cat dealer to manage your fleet in real-time so you can maximize efficiency, improve productivity, and lower operating costs.

*Product Link licensing not available in all areas. Please consult your Cat dealer for availability.

D7E Track-Type Tractor Specifications

Engine Service Refi ll Capacities Hydraulic Controls –

Engine Model Cat® C9.3 ACERT™ Fuel Tank 409 L 108 gal Main Relief Valve Global Emissions U.S. Tier 4 Interim/ Cooling System 87 L 22.5 gal Pressure Setting – 27 600 kPa 4,000 psi

EU Stage IIIB/ SteeringEngine Crankcase 30 L 8 gal Japan MLIT Step 4

Powertrain 60 L 16 gal • Rated Implement Pump Speed 2,000 rpm.

Engine Power (Maximum) • Rated Steering Pump Speed 2,500 rpm. Final Drives (each) 28 L 7 gal

SAE J1995 201 kW 270 hp Final Drive 34 L 9 gal

ISO 14396 198 kW 266 hp Hydraulic Controls – (LGP each) ISO 14396 (DIN) 270 hp Maximum Operating Pressure Pivot Shaft 7 L 1.8 gal

Net Power (Rated) Compartment Bulldozer 27 600 kPa 4,000 psi ISO 9249/ 175 kW 235 hp Hydraulic Tank 76 L 20 gal Tilt Cylinder 27 600 kPa 4,000 psi

SAE J1349

Ripper (Lift) 27 600 kPa 4,000 psi ISO 9249/ 238 hp Weights

Ripper (Pitch) 27 600 kPa 4,000 psi SAE J1349 (DIN) Shipping Weight 21 955 kg 48,402 lb Steering 41 000 kPa 5,950 psi Net Power (Maximum) Operating Weight – 26 055 kg 57,441 lb

ISO 9249/ 187 kW 251 hp STD SU Ripper

SAE J1349

Operating Weight – 28 525 kg 62,886 lb ISO 9249/ 254 hp Type Multi-ShankLGP S SAE J1349 (DIN) Number of Pockets 3 Shipping Weight – 24 335 kg 53,649 lb

Bore 115 mm 4.5 in LGP Overall Beam Width 2088 mm 82.2 in Stroke 149 mm 5.9 in Beam Cross Section 355 mm 14.0 in• Shipping Weight includes lubricants, Displacement 9.3 L 567 in3 coolant, ROPS/FOPS cab, standard track Maximum Clearance 588 mm 23.1 in

• Maximum Engine Power at 1,600 rpm, and 10% fuel. Raised (under tip, Rated Net Power at 1,700 rpm, • Operating Weight includes blade, lubricants, pinned in bottom Maximum Net Power at 1,450 rpm. coolant, full fuel tank, standard track, hole)

• Net power advertised is the power available ROPS/FOPS cab, drawbar and operator. Maximum 650 mm 25.6 in at the flywheel when engine is equipped Penetration with fan, air cleaner, and muffl er. Hydraulic Controls – Pump Maximum 87.4 kN 19,639 lbf

• No derating required up to 3200 m Penetration Force Pump Output – 312 L/min 82.4 gal/min(10,500 ft) altitude, beyond 3200 m Steering Pryout Force 234.4 kN 52,695 lbf(10,500 ft) automatic derating occurs.

• All nonroad U.S. EPA Tier 4, European Pump Output – 200 L/min 52.8 gal/min Weight – with 1650 kg 3,572 lb

Union (EU) Stage IIIB and IV, and Japan Implement One Shank

(MLIT) Step 4 certified diesel engines are required to use:

– Ultra Low Sulfur Diesel (ULSD) and

Sulfur-Free fuels that are 15 ppm (mg/kg) sulfur or less.

– Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifi cation.

Lift Cylinder Flow 200 L/min 52.8 gal/min

Ripper Cylinder 200 L/min 52.8 gal/min Flow

Pump Type Piston, Variable Displacement

Tilt Cylinder Flow 93 L/min 24.6 gal/min

– Head End Flow

Tilt Cylinder Flow 66 L/min 17.4 gal/min

– Rod End Flow

Each Additional 150 kg 330 lb Shank

Ramp Angle 26 Degrees

Pocket Spacing 900 mm 35.4 in

Shank Gauge 1800 mm 70.9 in

Shank Section 72 mm × 228 mm

2.8 in × 9.0 in

Minimum Engine Specs

Engine Power (Maximum)

SAE J1995 201 kW 270 hp

ISO 14396 198 kW 266 hp

ISO 14396 (DIN) 270 hp

Net Power (Rated)

ISO 9249/ 175 kW 235 hp

SAE J1349

ISO 9249/ 238 hp

SAE J1349 (DIN)

Net Power (Maximum)

ISO 9249/ 187 kW 251 hp

SAE J1349

ISO 9249/ 254 hp

SAE J1349 (DIN)

Maximum Weight Specs

Engine

Weights

Shipping Weight 21 955 kg 48,402 lb

Operating Weight – 26 055 kg 57,441 lb

STD SU

Shipping Weight includes lubricants, coolant, ROPS/FOPS cab, standard track and 10% fuel.

Operating Weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.

Winch Standards Drive Train

Winch Model PA90

Weight* 1520 kg 3,350 lb

Oil Capacity 12 L 3.2 gal

Winch and Bracket 1115 mm 93.9 in Length

Winch Case Length 1110 mm 43.7 in

Winch Case Width 826 mm 32.5 in

Increased Tractor 1032 mm 93.9 in Length – STD

Increased Tractor 1032 mm 93.9 in Length – LGP

Drum Diameter 318 mm 12.5 in

Drum Width 226 mm 8.9 in

Flange Diameter 610 mm 24 in

Drum Capacity – 62 m 203 ft 24 mm (1 in)

Drum Capacity – 56 m 185 ft 29 mm (1.13 in)

Ferrule Size 60 mm × 65 mm (O.D. × Length) 2.38 in × 2.56 in

Winch Drive Hydraulic

Control Electronic/Hydraulic

Installed Weight 1520 kg 3,350 lb

Winch Length 1115 mm 43.9 in

Overall Width 1090 mm 43 in

Throat Clearance 218 mm 8.6 in

Rope Diameter 25 mm 1 in (recommended)

Cable Ferrule Size 60 mm × 65 mm (O.D. × Length) 2.38 in × 2.56 in

Maximum Bare 400.3 kN 90,000 lbf Drum Line Pull

Maximum Bare 21 m/min 70 ft/min Drum Line Speed

Maximum Full 253.5 kN 57,000 lbf Drum Line Pull

Maximum Full 35 m/min 116 ft/min Drum Line Speed

* Basic winch weight, mounting arrangement, hydraulic and electrical system weight.

ROPS/FOPS • Rollover Protective Structure (ROPS) meets the following criteria:

ISO 3471:2008

• Falling Object Protective Structure (FOPS) meets the following criteria:

ISO 3449:2005 Level II

Brakes • Crawler Machine Brake Requirements meets the following criteria:

ISO 10265:2008

Cab ANSI/SAE J1166 OCT98

• The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 77 dB(A), and as measured by ISO 6396:

2008 is 75 dB(A), for cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.

• Hearing protection may be needed when operating with an open cab (when not properly maintained or doors/windows open) for extended periods and noisy environment.

• The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 80 dB(A).

Type Electric Drive

AC Compressor 320 Volts Nominal Input Voltage

AC Compressor 12 Amps Maximum Input Current

Electric Water Pump 320 Volts System Nominal Input Voltage

Electric Water Pump 5 Amps System Nominal Input Current

AC Generator and 480 Volts Propulsion Module Voltage

• Nominal current dependent on heat/ humidity loading on HVAC unit.

• Measured with water pump operating speed of 4,400 rpm. Measurement is 1 Amp with the water pump operating speed of 2,100 rpm.

Winch

Weight* 1520 kg 3,350 lb

Increased Tractor 1032 mm 93.9 in Length – STD

Drum Capacity – 62 m 203 ft 24 mm (1 in)

Drum Capacity – 56 m 185 ft 29 mm (1.13 in)

Winch Drive Hydraulic

Control Electronic/Hydraulic

Installed Weight 1520 kg 3,350 lb

Maximum Bare 400.3 kN 90,000 lbf Drum Line Pull

Maximum Bare 21 m/min 70 ft/min Drum Line Speed

Maximum Full 253.5 kN 57,000 lbf Drum Line Pull

Maximum Full 35 m/min 116 ft/min Drum Line Speed

* Basic winch weight, mounting arrangement, hydraulic and electrical system weight.

Standards

ROPS/FOPS • Rollover Protective Structure (ROPS) meets the following criteria:

ISO 3471:2008

• Falling Object Protective Structure (FOPS) meets the following criteria:

ISO 3449:2005 Level II

Brakes • Crawler Machine Brake Requirements meets the following criteria:

ISO 10265:2008

Cab ANSI/SAE J1166 OCT98

The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 77 dB(A), and as measured by ISO 6396:

2008 is 75 dB(A), for cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.

Winch Specs

Max

Max

Max

Min

Min

Min

Min

Min

All dimensions are approximate

STD LGP

1 Track Gauge 1981 mm 78 in 2286 mm 90 in

2 Width of Tractor over Trunnions 2880 mm 113 in 3423 mm 135 in

Width of Tractor without Trunnions (std. shoes) 2591 mm 102 in 3200 mm 126 in

3 Machine Height from Tip of Grouser

Top of Stack 3365 mm 132 in 3365 mm 132 in

Top of Standard Cab 3392 mm 134 in 3392 mm 134 in

From Ground Face of Shoe 3322 mm 131 in 3322 mm 131 in

4 Length of Track on Ground 3016 mm 119 in 3450 mm 136 in

5 Length of Basic Tractor 4608 mm 181 in 4608 mm 181 in

With the following attachments add to basic tractor length:

Ripper (with tip at ground line) 1391 mm 55 in N/A

Ripper (with tip fully raised) 1222 mm 48 in N/A

Winch 1032 mm 41 in 1032 mm 41 in

Drawbar 270 mm 10.6 in 270 mm 10.6 in

S Blade 977 mm 38 in N/A

SU Blade 1187 mm 47 in N/A

U Blade 1425 mm 56 in N/A

A Blade 1230 mm 48 in 1230 mm 48 in

6 Height of Grouser 70 mm 2.75 in 70 mm 2.75 in

7 Ground Clearance 472 mm 18.6 in 472 mm 18.6 in

Ground Contact Area (std. shoes) 3.68 m2 5,698 in2 6.31 m2 9,792 in2

Number of Shoes per Side 40 44

Standard Shoe Width and Type 610 mm 24 in 915 mm 36 in

MS MS

Ground Pressure 69.5 kPa 10.1 psi 44.3 kPa 6.4 psi

Pitch 215.9 mm 8.5 in 215.9 mm 8.5 in

Track Rollers/Side 7 8

Number of Carrier Rollers 2 2

8 Drawbar Height (grouser tip to center of clevis) 719 mm 28 in 719 mm 28 in

Max Min

Max

Max Min

Max

Max a1Ma1

8 x

4ax4

Max

1 Track Gauge 1981 mm 78 in

STD

Width of Tractor without Trunnions (std. shoes) 2591 mm 102 in

4 Length of Track on Ground 3016 mm 119 in

5 Length of Basic Tractor 4608 mm 181 in

With the following attachments add to basic tractor length:

Winch 1032 mm 41 in

7 Ground Clearance 472 mm 18.6 in

Ground Contact Area (std. shoes) 3.68 m2 5,698 in2

Ground Pressure 69.5 kPa 10.1 psi

SU Blade 1187 mm 47 in

Max

Max

Max

Max

Max

Bulldozer Specifications

Blade 7A 7S 7SU 7U Straight Angled 25° 7S LGP

Blade Capacity (SAE J1265) m3 5.16 6.86 8.34 5.15 – 5.89 yd3 6.75 8.98 10.91 6.74 – 7.7

Width (over end bits) mm 3904 3713 3988 4503 4120 4545 ft 12.81 12.18 13.08 14.77 13.52 14.91

Height mm 1363 1524 1553 1373 1373 1343 ft 4.5 5 5.1 4.5 4.5 4.4

Digging Depth mm 586 586 586 711 711 644 in 23.1 23.1 23.1 28 28 25.4

Ground Clearance mm 1108 1108 1108 1120 1120 1264 in 43.6 43.6 43.6 44.1 44.1 49.8

Maximum Tilt mm 1045 987 1085 695 695 785 in 41.1 38.9 42.7 27.4 27.4 30.9

Weight* kg 3504 3832 3806 3790 3790 3970 lb 7,709 8,431 8,373 8,330 8,330 8,734

* Weight includes cylinder mounting, lift cylinder and lines, blade, push arms, trunnions, and cylinder lines (Tilt).

Undercarriage

Type Heavy Duty Undercarriage

Configuration STD LGP

Number of Rollers (each side) 7 8

Number of Shoes (each side) 40 44

Pitch 216 mm 8.5 in 216 mm 8.5 in

Shoe Width 610 mm 24 in 915 mm 36 in

Grouser Height (MS) 70 mm 2.75 in 70 mm 2.75 in

Length of Track on Ground (Heavy Duty) 3016 mm 119 in 3450 mm 136 in

Track Gauge 1981 mm 78 in 2286 mm 90 in

Ground Contact Area (Heavy Duty) 3.68 m2 5,698 in2 6.31 m2 9,792 in2

Ground Pressure (Heavy Duty) 69.5 kPa 10.1 psi 44.3 kPa 6.4 psi

Ground Clearance 472 mm 18.6 in 472 mm 18.6 in

Blade

Blade Capacity (SAE J1265) m3 yd3

7SU

6.86

8.98

Width (over end bits) mm ft

12.18

Height mm ft

Digging Depth mm in

23.1

Ground Clearance mm in

43.6

Maximum Tilt mm in

38.9

Minimum Blade Specs

Shoe Width 610 mm 24 in

Track Gauge 1981 mm 78 in

Length of Track on Ground (Heavy Duty) 3016 mm 119 in

Ground Contact Area (Heavy Duty) 3.68 m2 5,698 in2

Ground Pressure (Heavy Duty) 69.5 kPa 10.1 psi

Ground Clearance 472 mm 18.6 in

STD

Type Heavy Duty Undercarriage

Configuration

Min

Min

Min

Min

Max

Max

Max

D7E Standard Equipment

Standard Equipment Standard equipment may vary. Consult your Cat dealer for details.

POWERTRAIN

• Aftercooler, Air to Air

• Air Cleaner, Precleaner with Strata

• Tube Dust Ejector

• C9.3 ACERT Engine

– EPA/ARB Tier 4 Interim/ EU Stage IIIB/Japan MLIT Step 4

– Certified Engine with Aftertreatment

• Coolant, Extended Life

• Differential Steering

• Ecology Drains (Engine Oil, Coolant, Hydraulic Oil, Fuel Tank, Powertrain Case)

• Electronic Air Cleaner Service Indicator

• Fan, Hydraulically Driven Demand with High Ambient Capability

• Final Drives, Double Reduction

• Generator, AC

• Parking Brake

• Power Inverter

• Propulsion Module

• Prescreener

• Radiator, Core, Aluminum Bar Plate

• Separate Circuit Core, Aluminum Bar Plate

• Starting Aid, Ether

• Transmission, Continuously Variable

• Turbocharger, Wastegated

• Water Separator, Primary Fuel Filter

UNDERCARRIAGE OTHER STANDARD EQUIPMENT

• Guards, End Track Guiding • CD ROM Parts Book

• Heavy Duty Track • Cab, Tilt

(610 mm/24" Moderate Service) • Engine Enclosures, Perforated

• Master Link • Front Tow Hook

• Rollers and Idlers, Lifetime Lubricated • Grade Control Ready

• Sprocket Rim Segments, Replaceable • Guards, Hinged Bottom

• Track Adjusters, Gas Spring Recoil • Guard, Final Drive Flange

• Undercarriage, Heavy Duty • Hood, Perforated

• Hydraulics, Load Sensing, Dozer Lift ELECTRICAL and Tilt

• Accessory Power Converter (APC) • Oil Cooler, Hydraulic

• Alarm, Backup • Oil Cooler, Powertrain

• Batteries, Maintenance Free (1,000 CCA) • Product Link (Satellite or Cellular)

• Converter, 24V to 12V, 10 Amp • Radiator Doors, Louvered, Double Hinged

• Heater, Engine Coolant, 120V • Screen, Grill Door Fan

• Horn, Forward Warning • S·O·S Sampling Ports

• Vandalism Protection for Fluid OPERATOR ENVIRONMENT Compartments and Battery Box

• Armrest, Adjustable

• Bidirectional Shift Switch

• CB Ready

• Cab, Center Post, Integral ROPS/FOPS

• Continuously Variable Speed Control

• Controls, Electro-Hydraulic, Pilot

• Operated with Electronic Deactivation Switch

• Foot Supports, Dash

• Hour Meter, Electronic

• Machine Isolation

• Mirror, Rearview

• Modular HVAC, Cab Mounted

• Monitoring System, Electronic, with

Coolant, Power Train Oil, and Hydraulic Oil Temperature, Fuel Gauge, Tachometer, Gear Indicator and Diagnostic Functions

• Operator Presence

• Pedal, Travel Control

• Radio Ready, 12V

• Seat Belt, Retractable, 76 mm (3 in)

• Seat, Cloth, Air Suspension

• Speed Recall Button

• Throttle Dial, Electronic with Eco Reverse

• Wipers, Intermittent

Standard Equipment

• Parking Brake

POWERTRAIN

ELECTRICAL

• Alarm, Backup

• Batteries, Maintenance Free (1,000 CCA)

• Heater, Engine Coolant, 120V

• Horn, Forward Warning

OPERATOR ENVIRONMENT

• Cab, Center Post, Integral ROPS/FOPS

• Continuously Variable Speed Control

• Hour Meter, Electronic

• Mirror, Rearview

• Operator Presence

• Pedal, Travel Control

• Seat Belt, Retractable, 76 mm (3 in)

• Speed Recall Button

• Throttle Dial, Electronic with Eco Reverse

• Wipers, Intermittent

• Monitoring System, Electronic, with Coolant, Power Train Oil, and Hydraulic Oil Temperature, Fuel Gauge, Tachometer, Gear Indicator and Diagnostic Functions

• Modular HVAC, Cab Mounted

OTHER STANDARD EQUIPMENT UNDERCARRIAGE

• Rollers and Idlers, Lifetime Lubricated

• Undercarriage, Heavy Duty

• Front Tow Hook

• Hydraulics, Load Sensing, Dozer Lift and Tilt

• Vandalism Protection for Fluid Compartments and Battery Box

D7E Optional Equipment

Optional Equipment Optional equipment may vary. Consult your Cat dealer for details.

MACHINE ARRANGEMENTS

• LGP Arrangement

• EU Regional Package

• Sound Suppression (Europe)

• Stockpile/Woodchip Arrangement

• Waste Handling/Landfi ll Arrangement

(XL, LGP)

POWERTRAIN

• Arctic/Cold Weather Attachments

• Battery – Heavy Duty (1,400 CCA) or Arctic

• Engine Coolant Heater, 240V

• Fast Fuel

• Fuel Tank – High Capacity (408 L/122 gal)

• Heavy Duty Grill Door, Hinged

• Insulated Clean Emissions Module

• Powertrain Oil Change System

• Remote Disconnect Switch

• Reversible Fan

OPERATOR ENVIRONMENT

• Black Hood and Back of Blade

• Converter – 24V to 12V

• Front and Rear Door/Window Screens

• Heated Seat

• Lights

– Basic (6) Lights

– Premium (10) HID Lights

– Warning Strobe

• Rear Vision Camera

• Sliding Rear Window

TRACK

• 610 mm, 660 mm, 914 mm (24", 26", 36")

• Moderate Service, Extreme Service

CONSTRUCTION TECHNOLOGIES

• AccuGrade Ready Installation Arrangement

• AccuGrade Mounting Bracket – Center

• Dual Tilt

GUARDING

• Bottom – Heavy Duty, Sealed

• Fast Fuel

• Final Drive, Sprocket

• Fuel Tank

• Lights

• Track Roller Frame

BLADES

• SU (Semi-universal), U (Universal),

(S) Straight, and Angle Blades

• Sweeps (without canopy)

• Track Guide Guards

• Turbine Precleaner

REAR IMPLEMENTS

• Counterweight

• Drawbar

• Implement Towing Arrangement

• Implement Towing Arrangement –

Eject Scraper

• Multi-shank Ripper and Ripper Hydraulics

• Striker Bar

• Winch Arrangement/Winch Hydraulics

• Lights –– Basic (6) Lights

OPERATOR ENVIRONMENT

• Rear Vision Camera

REAR IMPLEMENTS

• Winch Arrangement/Winch Hydraulics

H7COSKMB

Highlight

H7COSKMB

Highlight

H7COSKMB

Highlight

Item 3 – Hydraulic Excavator (1)

349E L Hydraulic Excavator

Engine Drive Engine Model Cat® C13 ACERT™ Maximum Travel Speed 4.7 km/h 2.9 mph Net Power – SAE J1349 295 kW 396 hp Maximum Drawbar Pull 335 kN 75,300 lbf

Weight Minimum Weight 47 800 kg 105,400 lb Maximum Weight 53 300 kg 117,500 lb

349E L Hydraulic Excavator Specifi cations

Engine

Engine Model Cat C13 ACERT

Net Power – SAE J1349 295 kW 396 hp

Gross Power – SAE J1995 322 kW 432 hp

Bore 130 mm 5.12 in

Stroke 157 mm 6.18 in

Displacement 12.5 L 763 in3

Weights

Minimum Weight* 47 800 kg 105,400 lb

Maximum Weight** 53 300 kg 117,500 lb

* 6.9 m (22'8") HD Reach boom, R3.35TB (11'0") HD stick, 9.0 mt (9.9 t) counterweight, Long FIX undercarriage, 3.1 m3 (4.1 yd3) bucket, 600 mm (24") DG shoes.

** 6.55 m (21'6") Mass boom, M3.0UB (9'10") HD stick, 9.0 mt (9.9 t) counterweight, Long VG undercarriage, 3.2 m3 (4.2 yd3) bucket, 900 mm (35") TG shoes.

Hydraulic System

Main System – Maximum Flow (Total) 770 L/min 203 gal/min

Swing System – Maximum Flow 385 L/min 102 gal/min

Maximum Pressure – Equipment 35 000 kPa 5,076 psi

Maximum Pressure – Equipment (Lift mode)

38 000 kPa 5,512 psi

Maximum Pressure – Travel 35 000 kPa 5,076 psi

Maximum Pressure – Swing 27 500 kPa 3,989 psi

Pilot System – Maximum Flow 27 L/min 7.1 gal/min

Pilot System – Maximum Pressure 4120 kPa 598 psi

Boom Cylinder – Bore 170 mm 6.69 in

Boom Cylinder – Stroke 1524 mm 60.00 in

Stick Cylinder – Bore 190 mm 7.48 in

Stick Cylinder – Stroke 1758 mm 69.21 in

TB Family Bucket Cylinder – Bore 160 mm 6.30 in

TB Family Bucket Cylinder – Stroke 1356 mm 53.39 in

UB Family Bucket Cylinder – Bore 170 mm 6.69 in

UB Family Bucket Cylinder – Stroke 1396 mm 54.96 in

Drive

Maximum Travel Speed 4.7 km/h 2.9 mph

Maximum Drawbar Pull 335 kN 75,300 lbf

Swing Mechanism

Swing Speed 8.7 rpm

Swing Torque 148.5 kN·m 109,500 lbf-ft

Service Refi ll Capacities

Fuel Tank Capacity 720 L 190 gal

Cooling System 50 L 13.2 gal

Engine Oil (with fi lter) 43 L 11.4 gal

Swing Drive (each) 10 L 2.6 gal

Final Drive (each) 15 L 4.0 gal

Hydraulic System (including tank) 570 L 150.6 gal

Hydraulic Tank 407 L 107.5 gal

Track

Number of Shoes (each side)

Long Fix Undercarriage 52

Long Variable Gauge Undercarriage 52

Number of Track Rollers (each side)

Long Fix Undercarriage 9

Long Variable Gauge Undercarriage 9

Number of Carrier Rollers (each side)

Long Fix Undercarriage 2

Long Variable Gauge Undercarriage 3

Sound Performance

Operator Noise (Closed) – ISO 6396 71 dB(A)

Spectator Noise – ISO 6395 106 dB(A)

• When properly installed and maintained, the cab offered by Caterpillar, when tested with doors and windows closed according to ANSI/SAE J1166 OCT98, meets OSHA and MSHA requirements for operator sound exposure limits in effect at time of manufacture.

• Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in noisy environment.

Standards

Brakes ISO 10265

Cab/FOGS SAE J1356

Cab/ROPS ISO 12117-2

Minimum Engine Specs

Maximum Weights

Engine

Weights

Maximum Weight** 53 300 kg 117,500 lb

Maximum Sound Levels Sound Performance

Operator Noise (Closed) – ISO 6396 71 dB(A)

Minimum Swing Mechanism Specs Swing Mechanism g

Swing Speed 8.7 rpm

Swing Torque 148.5 kN·m 109,500 lbf-ft

Minimum Drive Specs Drive

Maximum Travel Speed 4.7 km/h 2.9 mph

Maximum Drawbar Pull 335 kN 75,300 lbf

Net Power – SAE J1349 295 kW 396 hp

Gross Power – SAE J1995 322 kW 432 hp

349E L Hydraulic Excavator Specifications

Dimensions – Long FIX Undercarriage All dimensions are approximate.

1 9

8 5

Long Reach Boom HD Reach Boom Mass Boom

7.4 m (24'3") 6.9 m (22'8") 6.55 m (21'6")

Stick LR4.3TB R3.9TB R3.35TB M3.0UB M2.5UB (14'1") (12'10") (11'0") (9'10") (8'2") mm (ft) mm (ft) mm (ft) mm (ft) mm (ft)

1 Shipping Height to Boom 3690 (12'1") 3670 (12'1") 3730 (12'3") 4020 (13'2") 3980 (13'1")

Shipping Height with Guard Rail 3610 (11'10") 3610 (11'10") 3610 (11'10") 3610 (11'10") 3610 (11'10")

2 Shipping Length 12 420 (40'9") 11 930 (39'2") 11 920 (39'1") 11 590 (38'0") 11 680 (38'4")

3 Tail Swing Radius 3760 (12'4") 3760 (12'4") 3760 (12'4") 3760 (12'4") 3760 (12'4")

4 Length to Center of Rollers 4360 (14'4") 4360 (14'4") 4360 (14'4") 4360 (14'4") 4360 (14'4")

5 Track Length 5370 (17'7") 5370 (17'7") 5370 (17'7") 5370 (17'7") 5370 (17'7")

6 Ground Clearance (including Shoe Lug Height) 510 (1'8") 510 (1'8") 510 (1'8") 510 (1'8") 510 (1'8")

7 Track Gauge 2740 (9'0") 2740 (9'0") 2740 (9'0") 2740 (9'0") 2740 (9'0")

8 Transport Width

600 mm (24") Shoes 3340 (11'0") 3340 (11'0") 3340 (11'0") 3340 (11'0") 3340 (11'0")

750 mm (30") Shoes 3490 (11'5") 3490 (11'5") 3490 (11'5") 3490 (11'5") 3490 (11'5")

900 mm (35") Shoes 3640 (11'11") 3640 (11'11") 3640 (11'11") 3640 (11'11") 3640 (11'11")

9 Cab Height 3220 (10'7") 3220 (10'7") 3220 (10'7") 3220 (10'7") 3220 (10'7")

Cab Height with Top Guard 3390 (11'1") 3390 (11'1") 3390 (11'1") 3390 (11'1") 3390 (11'1")

10 Counterweight Clearance 1280 (4'2") 1280 (4'2") 1280 (4'2") 1280 (4'2") 1280 (4'2")

Dimensions – Long FIX Undercarriage Dimension Specs

900 mm (35") Shoes 3640 (11'11")

6 Ground Clearance (including Shoe Lug Height) 510 (1'8")

7 Track Gauge 2740 (9'0")

8 Transport Width

Long Reach Boom

7.4 m (24'3")

Stick LR4.3TB (14'1") mm (ft)

Minimum

Maximum

Maximum

Max Max

Working Ranges All dimensions are approximate.

MetersFeet

MetersFeet

10 10

30 9 30 9

0 0

1 7

R3.35TB With Quick Coupler R3.9TB Without Quick Coupler

R3.35TB Without Quick Coupler

R3.9TB With Quick Coupler

LR4.3TB

0 0

1 7

M2.5UB Without Quick Coupler

M3.0UB Without Quick Coupler

20 6 20 6

30 9 13 12 11 10 9 8 7 6 5 4 3 2 1 0 1 Meters

30 9 12 11 10 9 8 7 6 5 4 3 2 1 0 1 Meters

45 40 35 30 25 20 15 10 5 0 Feet 40 35 30 25 20 15 10 5 0 Feet

Long Reach Boom

7.4 m (24'3")

HD Reach Boom

6.9 m (22'8")

Mass Boom

6.55 m (21'6")

Stick LR4.3TB R3.9TB R3.35TB M3.0UB M2.5UB (14'1") (12'10") (11'0") (9'10") (8'2") mm (ft) mm (ft) mm (ft) mm (ft) mm (ft)

Long FIX Undercarriage 1 Maximum Digging Depth 8910 (29'3") 8180 (26'10") 7630 (25'0") 7230 (23'9") 6730 (23'1")

2 Maximum Reach at Ground Level 12 940 (42'5") 12 120 (39'9") 11 710 (38'5") 11 200 (36'9") 10 740 (35'3")

3 Maximum Cutting Height 11 160 (36'7") 10 730 (35'2") 10 810 (35'6") 10 300 (33'10") 10 110 (33'2")

4 Maximum Loading Height 7890 (25'11") 7450 (24'5") 7460 (25'6") 6820 (22'5") 6620 (21'9")

5 Minimum Loading Height 2250 (7'5") 2230 (7'4") 2780 (9'1") 2650 (8'8") 3150 (10'4")

6 Maximum Depth Cut for 2440 mm (8'0") Level Bottom

8790 (28'10") 8050 (26'5") 7490 (24'7") 7080 (23'3") 6560 (21'6")

7 Maximum Vertical Wall Digging Depth 6480 (21'3") 5890 (19'4") 5760 (18'11") 4570 (15'0") 4140 (13'7")

Long Reach Boom

7.4 m (24'3")

LR4.3TB

(14'1")

Stick mm (ft) Long FIX Undercarriage

1 Maximum Digging Depth 8910 (29'3")

2 Maximum Reach at Ground Level 12 940 (42'5")

7 Maximum Vertical Wall Digging Depth 6480 (21'3")

1 7

Minimum Minimum

Minimum

Min

Min

Minimum Working Ranges Specs

Operating Weight and Ground Pressure

900 mm (35") 750 mm (30") 600 mm (24") Triple Grouser Shoes Triple Grouser Shoes Double Grouser Shoes kg (lb) kPa (psi) kg (lb) kPa (psi) kg (lb) kPa (psi)

Long FIX Undercarriage Long Reach Boom – 7.4 m (24'3")

LR4.3TB HD (14'1") 50 000 (110,200) 58.0 (8.4) 49 300 (108,700) 68.0 (9.9) 48 600 (107,100) 84.0 (12.2)

HD Reach Boom – 6.9 m (22'8")

R3.9TB HD (12'10") 49 500 (109,100) 57.0 (8.3) 48 800 (107,600) 68.0 (9.9) 48 100 (106,000) 83.0 (12.0)

R3.35TB HD (11'0") 49 200 (108,500) 57.0 (8.3) 48 500 (106,900) 67.0 (9.7) 47 800 (105,400) 83.0 (12.0)

Mass Boom – 6.55 m (21'6")

M3.0UB HD (9'10") 50 500 (111,300) 58.0 (8.4) 49 700 (109,600) 69.0 (10.0) 49 100 (108,200) 85.0 (12.3)

M2.5UB HD (8'2") 50 200 (110,700) 58.0 (8.4) 49 500 (109,100) 69.0 (10.0) 48 800 (107,600) 85.0 (12.3)

Long VG Undercarriage Long Reach Boom – 7.4 m (24'3")

LR4.3TB HD (14'1") 52 700 (116,200) 61.0 (8.8) 52 000 (114,600) 72.0 (10.4) 51 200 (112,900) 89.0 (12.9)

HD Reach Boom – 6.9 m (22'8")

R3.9TB HD (12'10") 52 200 (115,100) 61.0 (8.8) 51 500 (113,500) 72.0 (10.4) 50 700 (111,800) 88.0 (12.8)

R3.35TB HD (11'0") 52 000 (114,600) 60.0 (8.7) 51 200 (112,900) 71.0 (10.3) 50 500 (111,300) 88.0 (12.8)

Mass Boom – 6.55 m (21'6")

M3.0UB HD (9'10") 53 300 (117,500) 62.0 (9.0) 52,500 (115,700) 73.0 (10.6) 51 800 (114,200) 90.0 (13.1)

M2.5UB HD (8'2") 53 000 (116,800) 62.0 (9.0) 52,300 (115,300) 73.0 (10.6) 51 500 (113,500) 90.0 (13.1)

Long FIX Undercarriage Long Reach Boom – 7.4 m (24'3")

LR4.3TB HD (14'1") 50 000 (110,200) 58.0 (8.4)

kg (lb) kPa (psi)

Operating Weight and Ground Pressure

Maximum

Maximum Weights and Ground Pressure Specs

900 mm (35") Triple Grouser Shoes

Bucket and Stick Forces

Long Reach Boom HD Reach Boom Mass Boom

7.4 m (24'3") 6.9 m (22'8") 6.55 m (21'6")

Stick LR4.3TB R3.9TB R3.35TB M3.0UB M2.5UB (14'1") (12'10") (11'0") (9'10") (8'2") kN (lbf) kN (lbf) kN (lbf) kN (lbf) kN (lbf) TB Linkage General Duty

Bucket Digging Force (SAE) – 237 (53,300) 237 (53,300) 260 (58,500) 260 (58,500)

Stick Digging Force (SAE) – 180 (40,500) 195 (43,800) 205 (46,100) 231 (51,900)

Heavy Duty

Bucket Digging Force (SAE) 238 (53,500) 237 (53,300) 237 (53,300) 260 (58,500) 260 (58,500)

Stick Digging Force (SAE) 168 (37,800) 180 (40,500) 195 (43,800) 205 (46,100) 231 (51,900)

Severe Duty

Bucket Digging Force (SAE) 236 (53,100) 237 (53,300) 237 (53,300) 255 (57,300) 255 (57,300)

Stick Digging Force (SAE) 168 (37,800) 180 (40,500) 195 (43,800) 204 (45,900) 230 (51,700)

Extreme Duty

Bucket Digging Force (SAE) 236 (53,100) 237 (53,300) 237 (53,300) – –

Stick Digging Force (SAE) 165 (37,100) 180 (40,500) 195 (43,800) – –

CW-55 Linkage General Duty

Bucket Digging Force (SAE) – 204 (45,900) 204 (45,900) – –

Stick Digging Force (SAE) – 169 (38,000) 182 (40,900) – –

Heavy Duty

Bucket Digging Force (SAE) – 212 (47,700) 212 (47,700) 238 (53,500) 238 (53,500)

Stick Digging Force (SAE) – 173 (38,900) 204 (45,900) 197 (44,300) 221 (49,700)

Severe Duty

Bucket Digging Force (SAE) 204 (45,900) 205 (46,100) 205 (46,100) 233 (52,400) 234 (52,400)

Stick Digging Force (SAE) 157 (35,300) 170 (38,200) 184 (41,400) 196 (44,100) 219 (49,200)

Long Reach Boom

7.4 m (24'3")

LR4.3TB

(14'1") kN (lbf)

Stick

Heavy Duty

Bucket Digging Force (SAE) 238 (53,500)

Stick Digging Force (SAE) 168 (37,800)

349E L (LC-FIX) Long Reach Boom Lift Capacities

Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side

Boom – 7.4 m (24'3") Counterweight – 9.0 mt (9.9 t) Bucket – None Stick – LR4.3TB (14'1") Shoes – 900 mm (35") triple grouser Heavy Lift Mode – On

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft 10.5 m/35.0 ft m ft

9.0 m kg *7150 *7150 8.90

30.0 ft lb *15,800 *15,800 28.81

7.5 m kg *9700 8450 *6950 *6950 9.89

25.0 ft lb *20,800 18,050 *15,250 *15,250 32.22

6.0 m kg *10 100 8250 *7350 6250 *6900 6200 10.57

20.0 ft lb *22,050 17,700 *15,200 13,700 34.56

4.5 m kg *14 200 *14 200 *12 100 10 600 *10 800 7950 9800 6150 *7100 5650 11.00

15.0 ft lb *30,650 *30,650 *26,200 22,850 *23,450 17,100 *19,750 13,150 *15,550 12,450 36.05

3.0 m kg *23 300 21 050 *16 700 13 850 *13 500 10 000 *11 600 7600 9600 5950 *7400 5300 11.22

10.0 ft lb *49,950 45,500 *36,050 29,950 *29,200 21,600 *25,200 16,350 20,600 12,750 *16,300 11,700 36.80

1.5 m kg *18 950 *18 950 *18 850 12 950 *14 750 9450 11 850 7300 9400 5750 *7950 5200 11.23

5.0 ft lb *44,950 41,750 *40,700 27,900 *31,950 20,400 25,550 15,650 20,200 12,350 *17,450 11,400 36.84

Ground Line kg *18 150 *18 150 *20 100 12 300 15 150 9050 11 550 7000 9250 5600 8600 5200 11.03 lb *41,800 40,050 *43,500 26,550 32,650 19,500 24,900 15,100 19,850 12,050 18,900 11,450 36.19

–1.5 m kg *12 200 *12 200 *21 750 18 400 *20 400 12 000 14 900 8800 11 400 6850 9150 5550 9000 5450 10.62 –5.0 ft lb *27,500 *27,500 *49,700 39,500 *44,200 25,850 32,000 18,950 24,500 14,750 19,850 12,000 34.81 –3.0 m kg *14 150 *14 150 *17 800 *17 800 *26 050 18 450 *19 800 11 950 14 800 8700 11 350 6800 9850 5950 9.96

–10.0 ft lb *31,600 *31,600 *40,050 *40,050 *56,450 39,600 *42,850 25,700 31,800 18,750 24,400 14,650 21,750 13,150 32.59 –4.5 m kg *24 500 *24 500 *23 450 18 700 *18 150 12 050 *14 400 8800 *11 250 6900 *11 200 6900 9.00

–15.0 ft lb *55,300 *55,300 *50,650 40,250 *39,200 25,950 *30,900 18,950 *24,750 15,350 29.35 –6.0 m kg *25 050 *25 050 *19 250 *19 250 *15 050 12 400 *11 500 9100 *11 150 8900 7.63

–20.0 ft lb *41,100 *41,100 *32,100 26,750 *24,500 20,050 24.68

*Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Always refer to the appropriate Operation and Maintenance Manual for specific product information.

349E L (LC-FIX) Long Reach Boom Lift Capacities Minimum Load Capacity Specs

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft 10.5 m/35.0 ft m ft

9.0 m kg *7150 *7150 8.90

30.0 ft g lb *15,800 *15,800 28.81

7.5 m kg *9700 8450 *6950 *6950 9.89

25.0 ft g lb *20,800 18,050 *15,250 *15,250 32.22

6.0 m kg *10 100 8250 *7350 6250 *6900 6200 10.57

20.0 ft g lb *22,050 17,700 *15,200 13,700 34.56

4.5 m kg *14 200 *14 200 *12 100 10 600 *10 800 7950 9800 6150 *7100 5650 11.00

15.0 ft g lb *30,650 *30,650 *26,200 22,850 *23,450 17,100 *19,750 13,150 *15,550 12,450 36.05

3.0 m kg *23 300 21 050 *16 700 13 850 *13 500 10 000 *11 600 7600 9600 5950 *7400 5300 11.22

10.0 ft g lb *49,950 45,500 *36,050 29,950 *29,200 21,600 *25,200 16,350 20,600 12,750 *16,300 11,700 36.80

1.5 m kg *18 950 *18 950 *18 850 12 950 *14 750 9450 11 850 7300 9400 5750 *7950 5200 11.23

5.0 ft g lb *44,950 41,750 *40,700 27,900 *31,950 20,400 25,550 15,650 20,200 12,350 *17,450 11,400 36.84

Ground kg *18 150 *18 150 *20 100 12 300 15 150 9050 11 550 7000 9250 5600 8600 5200 11.03 Line g lb *41,800 40,050 *43,500 26,550 32,650 19,500 24,900 15,100 19,850 12,050 18,900 11,450 36.19

–1.5 m kg *12 200 *12 200 *21 750 18 400 *20 400 12 000 14 900 8800 11 400 6850 9150 5550 9000 5450 10.62 –5.0 ft g lb *27,500 *27,500 *49,700 39,500 *44,200 25,850 32,000 18,950 24,500 14,750 19,850 12,000 34.81

–3.0 m kg *14 150 *14 150 *17 800 *17 800 *26 050 18 450 *19 800 11 950 14 800 8700 11 350 6800 9850 5950 9.96 –10.0 ft g lb *31,600 *31,600 *40,050 *40,050 *56,450 39,600 *42,850 25,700 31,800 18,750 24,400 14,650 21,750 13,150 32.59

–4.5 m kg *24 500 *24 500 *23 450 18 700 *18 150 12 050 *14 400 8800 *11 250 6900 *11 200 6900 9.00 –15.0 ft g lb *55,300 *55,300 *50,650 40,250 *39,200 25,950 *30,900 18,950 *24,750 15,350 29.35

–6.0 m kg *25 050 *25 050 *19 250 *19 250 *15 050 12 400 *11 500 9100 *11 150 8900 7.63 –20.0 ft g lb *41,100 *41,100 *32,100 26,750 *24,500 20,050 24.68

*Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity y y g p y pp g p y p y standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the y y g p y pp g g g above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to g p g p handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

349E L Standard Equipment

Standard equipment may vary. Consult your Cat dealer for details.

ENGINE

• C13 diesel engine

• Bio diesel capable

• Meets U.S. Tier 4 (Interim) emission standards

• 2300 m (7,500 ft) altitude capability

• Electric priming pump

• Automatic engine speed control

• Standard, economy and high power modes

• Two-speed travel

• Side-by-side cooling system

• Radial seal air fi lter

• Primary filter with water separator and water separator indicator switch

• Fuel differential indicator switch in fuel line

• 2×6 micron main fi lters

• 1×10 micron primary fuel line fi lter

HYDRAULIC SYSTEM

• Regeneration circuit for boom and stick

• Reverse swing dampening valve

• Automatic swing parking brake

• High-performance hydraulic return fi lter

• Capability of installing HP stackable valve and medium and QC valve

• Capability of installing additional auxiliary pump (up to 80 L/min [21 gal/min]) and circuit

• Capability of installing boom lowering control device and stick lowering check valve

• Capability of installing Cat Bio hydraulic oil

CAB

• Pressurized operator station with positive fi ltration

• Mirror package

• Sliding upper door window

(left-hand cab door)

• Glass-breaking safety hammer

• Removable lower windshield within cab storage bracket

• Coat hook

• Beverage holder

• Literature holder

• Radio with MP3 auxiliary audio port

• Two stereo speakers

• Storage shelf suitable for lunch or toolbox

• Color LCD display with warning, fi lter/ fluid change, and working hour information

• Adjustable armrest

• Height adjustable joystick consoles

• Neutral lever (lock out) for all controls

• Travel control pedals with removable hand levers

• Capability of installing two additional pedals

• Two power outlets, 10 amp (total)

• Laminated glass front upper window and tempered other windows

UNDERCARRIAGE

• Grease Lubricated Track GLT4

• Towing eye on base frame

• Heavy-duty track rollers

• Track motor guards

ELECTRICAL

• 80 amp alternator

• Circuit breaker

• Capability to electrically connect a beacon

LIGHTS

• Boom light

• Cab lights with time delay

• Exterior lights integrated into storage box

SECURITY

• Cat one key security system

• Door locks

• Cap locks on fuel and hydraulic tanks

• Lockable external tool/storage box

• Signaling/warning horn

• Secondary engine shutoff switch

• Openable skylight for emergency exit

• Rearview camera

Standard Equipment

• Electric priming pump

• Automatic engine speed control

• Standard, economy and high power modes

• Two-speed travel

• Primary filter with water separator and water separator indicator switch

• Towing eye on base frame

• Heavy-duty track rollers

• Track motor guards

• Grease Lubricated Track

UNDERCARRIAGE

CAB

• Mirror package

• Glass-breaking safety hammer

• Height adjustable joystick consoles

• Neutral lever (lock out) for all controls

• Travel control pedals with removable hand levers

• Laminated glass front upper window and tempered other windows

• Boom light

• Exterior lights integrated into storage box one key security system

• Door locks

• Cap locks on fuel and hydraulic tanks

• Signaling/warning horn

• Secondary engine shutoff switch

• Openable skylight for emergency exit

• Rearview camera

349E L Optional Equipment

ENGINE

• Electric refueling pump…