27-Q-A014 SPECS PACKAGE.pdf

PDF 397 KB Posted

Attached to
SOLICITATION - USMA West Point APFU GYM-A Shirts
Solicitation number
W911SD-27-Q-A014
Issued by

About this file

This is a specification and procurement document for West Point GYM-A Black Shirts for the United States Military Academy (USMA) Corps of Cadets, issued by the Logistics, Readiness and Contingency (LRC) West Point.

The contractor must provide standard Army GYM-A Black Shirts in both short-sleeve and long-sleeve formats, featuring a USMA crest in Army Gold positioned on the upper left front. The crest shall measure approximately 3.25 inches tall and 3-11/16 inches wide, with the top positioned 9 inches (±1/8") below the shoulder seam-collar intersection. Cadet last names only shall be printed in block letters 3/8" thick and 0.5" high in matching Army Gold, centered 0.5" above the crest. For short-sleeve shirts with write-on capability, a 1" x 5" heavyweight white cotton twill nameplate shall be sewn 1.0" above the crest. All shirts must be 100% preshrunk cotton with seamless collars, double-needle stitching throughout, and taped shoulder-to-shoulder construction. Annual requirements include approximately 4,000 short-sleeve shirts with white nameplates, 5,200 short-sleeve regular printed shirts, and 3,900 long-sleeve shirts, distributed across five adult size categories (Small through XXXL). The government will provide alphabetical cadet name lists with sizes on or about May 1st per option year, with delivery required within 60 calendar days from date of receipt (names may be provided in up to two separate batches, each with its own 60-day deadline). Shirts must be bundled in plastic bags by cadet name (six short-sleeve and three long-sleeve per cadet), boxed alphabetically by last name, with approximately 168 shirts per carton, accompanied by packing lists cross-referenced with cadet name rosters. The contractor bears responsibility for replacement of any shirts with misspelled names, incorrect sizes, or defective write-on patches at no cost to the government, with replacement delivery required within seven calendar days of error notification. All pickup and delivery costs for incorrect and corrected shirts are the contractor's responsibility unless the government is at fault. The government estimates 1,200 to 1,300 cadet names annually and reserves the right to increase orders by up to 10% at the same per-shirt rate. Physical delivery is to U.S. Army USMA West Point, Building 913, Washington Road, West Point, NY 10996-1535.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

West Point “GYM-A” Shirt Specifications The contractor is to provide the Standard Army uniform item, GYM-A Black Shirt, short sleeve.

The crest shall be an Army Gold (same Gold as used on the ARMY logo on the standard GYM-A shirts) only with the image shown below.

This Space Intentionally Left Blank

The photos below are for reference only to demonstrate placement and alignment.

USMA CREST POSITIONING

1. The Contractor shall position the USMA Crest on the upper left front of the shirt.

2. The crest shall be centered from left to right on the vertical line from the point at which the shoulder seam meets the collar, parallel to the sides of the shirt to the bottom edge of the shirt.

3. The top of the crest shall be 9 inches (+/- 1/8” ) below the shoulder seam - collar seam intersection.

NAME PRINTING

The Contractor shall:

1. Print the last name only,

2. Center and print the name 0.5” above the United States Military Academy (USMA) crest,

3. Use block letters 3/8” thick and 0.5” high.

4. Use the color gold with the same characteristics as the USMA crest.

PLEBE CLASS Shirt Requirement

1. The Government will provide the Contractor with an alphabetical list of cadet names with associated sizes on or about the 1st of May per base or option year. The Contractor shall print the provided names and aforementioned crest on six (6) short sleeve shirts and three (3) long sleeve shirts for each cadet.

2. The Government reserves the right to provide the names and sizes to the contractor in either one or two separate batches. There shall not be more than two batches provided to the contractor.

3. The required delivery date for the shirts is not later than 60 calendar days from the date the names are provided to the contractor. Should two batches of information be provided to the contractor, each batch has a required delivery date of 60 days from the date the batch information was provided to the contractor.

4. The government estimates between 1200 to 1300 cadet names and associated sizes

5. The government reserves the right to increase the order by not more than ten percent (10%) of the anticipated annual requirement and shall pay the same rate per shirt as the base requirement.

PACKAGING

The Contractor shall:

1. Pack shirts with quantities requested with the same size and number per plastic bag

2. Bundle S/S shirts with names in packages of 6(six) for each cadet. Pack the bags so that the name and bundle clearly marked with size of shirt.

3. Bundle L/S shirts in packages of 3(three) for each cadet. Pack the bags so that the name and bundle clearly marked with size of shirt.

4. Box the shirts by name alphabetically.

5. Pack approximately one hundred sixty-eight (168) shirts per carton.

6. Include packing lists by size and quantity in the cartons.

7. Accompany each packing list with a corresponding list of names.

Scope of Exchange The contractor agrees to replace shirts that have misspelled names and incorrect sizes, which were produced as part of the order for LRC West Point, at no charge to the government.

Terms and Conditions

1. Error Responsibility and No-Cost Exchange:

Sizes are provided by the government to the contractor. If a cadet requires a different size due to a fault on the government, the government will pay the price difference.

2. Description of Errors:

The shirts requiring replacement have the following issues:

a. Misspelled names as was determined from the list of cadet names sent from LRC

West Point to the contractor

b. Incorrect sizes as was determined from the list of cadet sizes sent from LRC West

Point to the contractor

3. Replacement Process:

The contractor will provide replacement shirts with:

Actual size shirt that is required versus forecasted shirt requirements. The replacement shirts must meet the same quality standards and specifications as the original order.

4. Delivery and Pickup:

The contractor will arrange for the pickup of the incorrectly made shirts from LRC West Point and ensure the timely delivery of the corrected shirts to LRC West Point. All costs related to the pickup and delivery of both the incorrect and corrected shirts will be borne by the contractor. If the government is at fault the costs will be borne by the government.

5. Ownership and Responsibility:

The incorrectly made shirts remain the property of LRC West Point until they are exchanged. The contractor is responsible for ensuring the correct replacement shirts are delivered in 7 days upon notification of error.

MILITARY SPECIFICATION SHEET

Standalone Specifications for Athletic Shirts (S/S & L/S) & Custom Requirements USMA

West Point GYM-A Shirts

1. CONTRACT LOGISTICS & DELIVERY SUMMARY

Physical Delivery Address: U.S. Army USMA West Point, c/o: GYM-A Shirts, BLDG 913, Washington Road, West Point, NY 10996-1535

Point of Contact for WAWF Invoicing / Administration: TBD TBD TBD

2. SHIRT MATERIAL & PRINTING

The Contractor shall provide GYM-A Black Shirts for the Corp of Cadets for the USMA conforming to the below specifications and delivery schedule (Short Sleeve & Long Sleeve).

• Crest: Standard USMA Crest in Army Gold (exact match to gold on standard GYM-A shirts).

• Name Printing (Standard Shirts): Print last name only in block letters 3/8" thick and 0.5" high, in matching Army

Gold, centered and positioned exactly 0.5" above the USMA crest.

3. DETAILED SIZING, MEASUREMENTS & ANNUAL QUANTITIES

3.1 Short Sleeve w/ White Nameplate (Total: 4,000 EA / Year)

Material Specs: 100% Preshrunk Cotton, Seamless Collar, Double-Needle Stitching Throughout, Taped

Shoulder-to-Shoulder. Includes custom write-on nameplate patch.

Size Body Length Body Width Sleeve Length Qty Percentage

Adult Small 26 - 28" 18" 16.5" 1,000 25.0%

Adult Medium 28 - 29" 20" 18.0" 1,200 30.0%

Adult Large 29 - 30" 22" 19.5" 1,200 30.0%

Adult Extra Large 30 - 31" 24" 21.0" 400 10.0%

Adult Extra Extra Large 31 - 32.5" 26" 20.75" 200 5.0%

Total - - - 4,000 100.0%

3.2 Short Sleeve Regular Printed (Total: 5,200 EA / Year)

Adult Small 26 - 28" 18" 16.5" 520 10.0%

Adult Medium 28 - 29" 20" 18.0" 1,820 35.0%

Adult Large 29 - 30" 22" 19.5" 1,820 35.0%

Adult Extra Large 30 - 31" 24" 21.0" 624 12.0%

Adult Extra Extra Large 31 - 32.5" 26" 20.75" 416 8.0%

Total - - - 5,200 100.0%

SPECIFICATIONS & PROCEDURES

3.3 Long Sleeve Standard (Total: 3,900 EA / Year)

Adult Small 26 - 28" 18" 33.5" 390 10.0%

Adult Medium 28 - 29" 20" 35.0" 780 20.0%

Adult Large 30" 22" 36.5" 975 25.0%

Adult Extra Large 29 - 31" 24" 38.0" 1,073 27.5%

Adult Extra Extra Large 30 - 32.5" 26" 39.5" 390 10.0%

Adult Extra Extra Extra Large 28 - 33.5" 28" 39.5" 292 7.5%

Total - - - 3,900 100.0%

4. WRITE-ON NAMEPLATE SPECIFICATIONS

This section outlines custom specifications for short-sleeve Gym-A shirts featuring a blank, write-on nameplate area. This requirement applies to Gym-A short-sleeve shirts (2) per cadet (Total 4,000 EA per year).

• The Patch: A blank 1-inch by 5-inch Heavyweight Cotton Twill strip (white) sewn onto the left chest (standard embroidery location), positioned exactly 1.0 inch above and centered over the Standard West Point Crest logo.

• Material Properties: The twill patch must be constructed of high-quality, pre-shrunk, marker-friendly fabric engineered to prevent ink bleeding or smudging when written on with a permanent Sharpie marker. The patch and writing must maintain clarity through institutional laundry cycles.

• Delivery: Strictly no later than (NLT) 1 APR 2027.

5. PLEBE CLASS CONTRACT BATCHING & DELIVERY RULES

1. Cadet Lists: The Government will provide an alphabetical list of cadet names with associated sizes on or about

1st of MAY per base or option year.

2. Cadet Allotment: For each cadet, the contractor shall print names/crests on standard and custom write-on formats as specified.

3. Batch Deliveries: The Government reserves the right to provide names/sizes in one or two separate batches.

Deliveries must be completed within 60 calendar days from the date batch information is provided to the contractor.

6. PACKAGING & BUNDLING INSTRUCTIONS

The Contractor shall adhere to the following packaging standards:

1. Pack shirts in quantities requested with the same size and number per plastic bag.

2. Bundle short-sleeve (S/S) shirts with cadet names in packages of 6 (six) per cadet, clearly marking the bag with the name and shirt size.

3. Bundle long-sleeve (L/S) shirts with cadet names in packages of 3 (three) per cadet, clearly marking the bag with the name and shirt size.

1393132864.CIV-Cordova Highlight

4. Box all finished shirts alphabetically by cadet last name.

5. Pack approximately 168 shirts per shipping carton.

6. Include packing lists detailing size and quantity inside every carton, accompanied by the corresponding cadet name list.

7. SCOPE OF EXCHANGE & REPLACEMENT QUALITY STANDARDS

• No-Cost Exchange: The contractor shall replace any shirts with misspelled names, incorrect sizes, or defective/bleeding write-on patches at no additional cost to the Government.

• 7-Day Turnaround: Replacement shirts meeting all quality and dimensional standards must be delivered within 7 calendar days from the date of error notification.

Quality Assurance (QA) Pass/Fail Inspection Report APFU Athletic Shirts

1. Executive Summary & Purpose

This document establishes the formal Quality Assurance (QA) Pass/Fail inspection criteria for Athletic Physical

Fitness Uniform (APFU) shirts procured under the Mission and Installation Contracting Command (MICC) vendor agreement. In accordance with standard military textile contract administration, incoming vendor shipments must undergo rigorous inspection across physical, dimensional, and administrative parameters prior to formal government acceptance.

Any lot or bundle exhibiting "Fail" characteristics as outlined in the inspection matrix below is subject to non-conformance reporting, rejection, and vendor remediation at no additional cost to the government.

2. Standard Quality Assurance (QA) Pass/Fail Matrix

Characteristic Specification Standard PASS Criteria (Acceptable) FAIL Criteria (Rejectable)

Material Composition

100% Preshrunk Cotton matching standard APFU Black Shirts.

Fabric is verified 100% preshrunk cotton; no synthetic blends; matches standard APFU shade and fabric weight.

Contains synthetic blend, shrinks excessively post-wash, or exhibits off-color dye/shading.

Stitching & Construction

Double-needle stitching throughout, seamless collar, taped shoulder-to-shoulder.

Clean, uniform seams; no loose threads; intact double-needle stitching;

secure shoulder-to-shoulder taping.

Single-needle stitching used; raw or frayed edges; unraveled threads;

structural seam failure.

Name Printing & Crest Alignment

Last name in block letters (3/8" thick, 0.5" high) in Army Gold, centered exactly 0.5" above USMA crest.

Exact letter thickness (3/8") and height (0.5"); precise 0.5" vertical spacing centered over crest; accurate spelling and Army Gold color match.

Misspelled name; off-color ink; crooked or off-center alignment; letter dimensions or spacing violating the 3/8" or 0.5" standards.

Write-on Nameplate Patch (If Applicable)

1" x 5" heavyweight white Cotton Twill, centered 1.0" above crest, marker-friendly.

Exact 1" x 5" dimensions; centered 1.0" above crest; permanent marker ink remains sharp without bleeding or smudging after washing.

Incorrect patch dimensions or placement; fabric allows permanent ink to bleed, feather, or smudge through laundry cycles.

Dimensional Sizing & Tolerances

Finished garment measurements must match size-specific chart ranges (Body Length, Width, Sleeve Length).

All physical garment measurements fall strictly within the designated sizing chart brackets for the labeled size.

Any physical dimension deviates outside the specified sizing ranges (e.g., Short Sleeve Adult Medium body length outside 28"–29").

Packaging, Bundling & Sorting

Short Sleeve (S/S) bundled in 6s, Long Sleeve (L/S) in 3s per cadet; boxed alphabetically by last name.

Exact shirt counts per bundle; clearly labeled individual bags; shipping cartons packed in strict alphabetical order by cadet last name.

Disordered or unalphabetized packing;

missing or illegible cadet name labels;

incorrect bundle quantities.

APFU Athletic Shirts QA Pass/Fail Report — MICC Vendor Specification Standards Page 2

3. Inspection Protocol & Acceptance Guidelines

1. Pre-Delivery Sampling: Quality Assurance Representatives (QAR) will conduct random sampling across shipping cartons upon receipt at the designated delivery point.

2. Visual & Dimensional Verification: Garments will be laid flat and measured using calibrated tape rules to verify body length, chest width, sleeve length, and crest/nameplate placement tolerances.

3. Wash & Bleed Testing: Where custom write-on cotton twill patches are required, sample garments will be tested with standard permanent markers and subjected to a standard laundry cycle to verify zero ink migration or smudging.

4. Administrative Compliance: Shipping manifests and carton labels will be cross-referenced against the alphabetical cadet roster. Improperly sorted cartons may be halted at receiving prior to garment-level inspection.

1194621791.CIV

Cross-Out

27-Q-A014 SPECS 1 GYM-A Specifications Photos Final
27-Q-A014 SPECS 2 GYM-A Specifications Final
MILITARY SPECIFICATION SHEET
1. CONTRACT LOGISTICS & DELIVERY SUMMARY
2. SHIRT MATERIAL & PRINTING
3. DETAILED SIZING, MEASUREMENTS & ANNUAL QUANTITIES
SPECIFICATIONS & PROCEDURES
4. WRITE-ON NAMEPLATE SPECIFICATIONS
5. PLEBE CLASS CONTRACT BATCHING & DELIVERY RULES
6. PACKAGING & BUNDLING INSTRUCTIONS
7. SCOPE OF EXCHANGE & REPLACEMENT QUALITY STANDARDS

APFU_Athletic_Shirts_QA_Pass_Fail_Report

File details come from the government source that posted it. Updated .