W911SD-23-R-0010 Solicitation AMEND 0002 D.FINAL Bath Robe.pdf

W911SD23R0010

0011871844

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to incorporate EVALUATING CRITERIA for Woven Terry Velour, no other changes.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 5

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 29-Nov-2022

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W911SD23R0010

X 9B. DATED (SEE ITEM 11)

28-Nov-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

29-Nov-2022

CODE

MICC - WEST POINT

681 HARDEE PLACE

WEST POINT NY 10996-1514

W911SD 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been modified:

FAR 52.212-2 ADDENDUM

ADDENDUM to FAR 52.212-2 EVALUATION--COMMERCIAL ITEMS

Provisions that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.

The following provisions are incorporated into 52.212-2 as an addendum to this solicitation:

Evaluation Factors for Award

(a) Basis for Contract Award. This is a Lowest Price Technically Acceptable source selection conducted in accordance with Federal Acquisition Regulation (FAR) 13.106-2, Evaluation of quotations or offers, as supplemented by the Defense Federal Acquisition Regulation Supplement (DFARS), and the Army Federal Acquisition Regulation Supplement (AFARS). The Government will select the best overall quote, based upon an integrated assessment of Experience, Past Performance, and Price Factors. Contract may be awarded to the contractor who is deemed responsible in accordance with the FAR, as supplemented, whose quote conforms to the solicitation’s requirements (to include all stated terms, conditions, representations, certifications, and all other information required by 52.212-2 of this solicitation and is judged by an overall assessment of the evaluation factors to represent the most advantageous to the Government. As part of making the assessment, an evaluation will be performed determining whether or not quote exceeds the minimum requirements at an associated price provides the Lowest Price Technically Acceptable to the Government.

(b) Award for All of the Work. The Government intends to award one (1) contract as a result of this solicitation. Quotes received for less than the stated number of items listed in the Price Schedule will be considered ineligible for award. As set forth in FAR 52.212-1 (g), the Government intends to evaluate quotes and award a contract without discussions with contractors. Therefore, the contractor’s initial quote should contain the contractor’s best terms from a price and technical standpoint. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary.

(c) Evaluation Criteria. The Sample in accordance with specifications (WOVEN TERRY, VELOUR) will be evaluated under two (2) evaluating factors: Technical, and Price.

Factor 1 - SAMPLE. The Sample in accordance with specifications (WOVEN TERRY, VELOUR) will receive one of the ratings defined below.

Table 1. Experience Acceptable/Unacceptable Ratings Rating Description Acceptable SAMPLE clearly meets the minimum specifications/requirements of the solicitation.

Unacceptable SAMPLE does NOT clearly meet the minimum specifications/requirements of the solicitation.

Factor 2 – Price. Price will not be scored or rated. Evaluation of price will be performed using one or more of the price analysis techniques in FAR 13.106-3(a). Through these techniques the Government will determine whether prices are reasonable.

Options. The Government will evaluate quotes for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that a quote is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). As part of price evaluation, the government will evaluate its option to extend services (see FAR Clause 52.217-8) by adding one-half of the contractor's final option period price to the contractor's total price. Thus, the contractor's total price for the purpose of evaluation will include the base period, 1st option, 2nd option, 3rd option, 4th option, and 1/2 of the 4th option. Contractors are not required to enter a price for the six-month period.

EVALUATING FACTORS

Characteristic Value Acceptable range Pass / Fail

Cut-able Width 60-62 inches See range of values

Fabric Weight 12.0 Ounces per Linear Yard ( + / - ) 0.1 ounce

Wales per inch 19 to 20 See range of values

Courses per inch 16 to 17 See range of values

*SEE ATTACHED DOCUMENTS FOR COMPLETE SPECIFICATIONS, DETAILS & INSTRUCTIONS*

*SEE ATTACHED DOCUMENTS FOR COMPLETE SPECIFICATIONS, DETAILS & INSTRUCTIONS*

*SEE ATTACHED DOCUMENTS FOR COMPLETE SPECIFICATIONS, DETAILS & INSTRUCTIONS*

IT IS THE OFFEROR'S RESPONSIBILTY TO REVIEW ALL ATTACHMENTS PERTAINING TO THIS

SOLICITAION.

SOW

25 October 2022

SALIENT FEATURES

CLOTH, WOVEN TERRY, VELOUR

USMA Local Stock Number C0321

1. Contents: 100% ringspun cotton

2. Cuttable Width: 60-62 inches (ASTM Test Method D3776-96)

3. Fabric Weight(finished): 12.0 (+/- 0.4oz) ounces per square yard, (ASTM Test Method D3776-96)

4. Color: (Custom Match to Color and Shade Swatch)

5. Construction: Woven as 14 oz per sq yd woven terry, then one side sheared, leaving one side as loop terry.

6. Wales per inch: 19 to 20

7. Courses per inch: 16 to 17

8. Burst Strength: 40, (ASTM Test Method D3787-89)

9. Shrinkage: (AATCC Test Method 125-1995)

a. Length: 5%

b. Width: 5%

10. Colorfastness to Laundering: (AATCC Test Method 61-1996 IIA)

a. Color Change: 4/5 Min

b. Staining: 4 Min

11. Colorfastness to Crocking: (AATCC Test Method 8-1966)

a. Dry & Wet: 4/3 Min

12. Colorfastness to Perspiration: (AATCC Test Method 15-1997)

a. Color Change: 4 Min

13. Colorfastness to Water: (AATCC Test Method 107-1997)

a. Color Change: 4/5 Min

14. Packing and packaging: According to standard commercial practices; each roll must contain a tag legible from the outside end of the package as to actual yardage and each roll must be individually packaged in paper, plastic wrap, or plastic bag to prevent soiling in freight and storage.

Intended end use: USMA Cadet Bathrobes.

(End of Summary of Changes)