W911SD19R00610001_90_DAY_HEATER_RENTAL.docx
DOCX document 30 KB Posted
- Attached to
- 90 DAY HEATER RENTAL
- Solicitation number
- W911SD19R0061
About this file
AMENDMENT #01-- REMOVES "TOWABLE" REQUIREMENT SEE RFI AND PWS
View the file
Other files
| File | Type | Posted |
|---|---|---|
| W911SD19R0061_CRANDALL_POOL_HEATERS__90_DAY_RENTAL.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
W911SD19R0061
SECTION SF 30 BLOCK 14 CONTINUATION PAGE
SUMMARY OF CHANGES
SECTION SF 1449 - CONTINUATION SHEET
The following have been added by full text:
REQUEST FOR INFORMATION
REQUEST FOR INFORMATION
QUESTION #1 Concerning the 90 Day heater rental at West Point, does the million BTU unit have to be towable? Is it ok if it can be placed with a forklift instead?
Answer #1 Forklift will work as long as contractor supplies all equipment needed to unload and place in the location.
The following have been modified:
PWS
The United States Army Garrison, West Point requires the rental of two diesel heaters on a short notice as stated below. This rental will only be for a 90 day duration and is a follow on to W911SD-19-P-0055. The heater requirements are as follows:
The Contractor shall provide all personnel, management, and any other items and services not government furnished, necessary to rent two portable heating units for a duration of three months at Crandall Pool, BLDG# 727, at the United States Army Garrison (USAGWP), West Point, New York. The contractor is responsible for any preventative maintenance required and to ensure the heater units are operational. Should a heater become inoperable for any reasonable reason, it shall be fixed or replaced on the same day to ensure continuous operation at no cost to the government.
Heater units to include:
#1 1 each, 1 MM (Million) BTU Diesel High Volume, Towable, Self-Contained Unit, No External Power Required.
ADDED 14 FEB Forklift will work as long as contractor supplies all equipment needed to unload and place in the location.( SEE RFI)
#2 1 each, Heater unit to include: Indirect 750K BTU Diesel.
#3 A/C Ducting 20 Inch x 25 Feet, Heat Ducting (High Temperature) 20” x 25’.
#4 Labor to include: Delivery and Pick-up, Assembly/Dismantle and Preventive Maintenance.
#5 Delivery must be guaranteed to be in place on 19 February 2019—timing is critical.
#6 Contractor must be flexible to allow shutdown of the current heaters on current contract and resumption of service with minimal delays.
(End of Summary of Changes) image1.wmf
File details come from the government source that posted it.