W911SD19R0020__Purchase_Description_LRC_Hangers_Base_+4.pdf

CSD-PD-4405-01

14 April 2014

Purchase Description

Hanger, Wood, Coat & Suit

SCOPE: This purchase description is intended to provide for a wooden coat hanger for the United States Military Cadets. The hanger will be used by both male and female cadets in their barracks room. The hanger will be used to accommodate a wide array of clothing.

Requirement Synopsis: The hanger shall be designed and constructed with a space saving body, curved to mimic the shape of the body to form fit suit coats, coats, jackets and other garments to help preserve their shape. The hanger shall be designed for the option of hanging strap garments securely. Please reference photos for reference and example purposes. The hanger shall offer the option of providing a non-slip pant bar.

1. Product Detail:

1.1 Hanger shall be constructed with sturdy, high quality hardwood.

1.2 The hanger shall be smooth and appropriately finished to prevent garment snags.

1.3 The hanger shall have a metal, chrome hanging hook.

1.4 The hanger shall be shaped and/or curved to accommodate a suit coat or jacket and other garments. Hangers with one or two piece shoulder arms are acceptable.

1.5 The hanger shall have a non-slip wooden trouser bar constructed and designed to prevent trousers from slipping off during storage or transport. The trouser bar shall not have a separate metal retaining bar.

1.6 The hanger shall be designed and constructed with either conventional notches, scoring or method to allow the hanging of garments with straps to hold them securely without slipping. Please see photos for reference and examples.

2. Hanger Dimensions:

2.1 The hangers shall be approximately 17-1/2 inches (17.5 inches) long/wide and the wood thickness shall be 7/16 to 9/16 of an inch (0.437 to 0.562 inch) measured on the bottom side of the shoulder arms.

2.2 The height of the entire hanger when stood up on a level surface measured from the surface to the top of the chrome hook shall be no less than 9-5/8 inch, (9.625 inch).

2.3 The height of the hanger body where the chrome hanging hook is, measured on the front side shall be no less than 1-3/4 inch (1.75 inch).

CSD-PD-4405-01

14 April 2014

2.4 The shoulder arms shall have no point measured on the front side shorter (smaller) than ¾ inch (0.75 inch)

3. Packaging: The Cadets are issued 18 hangers each. The packaging shall be conducive to this issue measure as follows;

3.1 The hangers shall come securely bundled, packaged, boxed with 18 hangers in a bundle, package or box. If bundled or packaged the conveyance shall be secure and sturdy enough to withstand normal shipping, storage and handling conditions. The “Unit of Issue” will be referred to as one unit of 18 each hangers. Each of these units of issue may come in Multi-packs, cases or larger boxes containing multiple units of issue.