Specification-_Comforters_Olive.pdf

SPECIFICATIONS

COMFORTER OLIVE DRAB

Construction:

1. Material shall be 50% Cotton/ 50% Polyester, Resilient, Odorless, Mat Resistant, Non-Allergenic, 100% Dacron RolloFill, Poly Filled White.

2. Shall be reversible.

3. Stitch Pattern shall be single needle tunnel.

4. Quilting pattern stitching shall be seven (7) horizontally and eight (8) vertically (see Figure 1).

5. Three (3) outside seams shall be sewn from inside and one (1) outside seam shall be sewn from inside and one (1) outside seam topstitched.

6. All outside and quilting seams shall be eight (8) stitches per inch.

7. Thread shall be cotton wrap polyester or 100% Cotton.

8. Total weight shall be approximately 4.0 Lbs. (+/- .5 Lbs.).

9. Overall size shall be 68” X 86” (+/- 1”).

10. Color shall be Pantone Color Olive Capulet Olive #18-0426 TPX on both sides.

11. Each Comforter shall have an identification/care label sewn on any corner. Tag size shall be a minimum of two and a half inches (2.5”) by three and a half inches (3.5”) made out of soft washable plastic, consistent with industry standards.

Packaging:

1. Each Comforter shall be individually packed and compressed in a vacuum sealed package to minimize storage space in accordance with standard commercial practices.

2. Packaging-boxed for shipping in accordance with standard commercial practices.

3. Bar-Code labels per specification shall be placed on outside of polybag.

4. Each box containing the comforters shall be labeled with name of product and quantity.

Bar Code Labels Characteristics:

1. Three (3) of nine (9) format.

2. Easily removable by customer.

3. Remains intact while warehoused.

4. Size of label should be large enough to be read, but not massive. Size shall be relative to the size of the item. Estimated size: two and a half inches (2.5.) by three and a half inches (3.5.).

5. Each Bar Code should contain the following:

BARCODE

STOCK NUMBER

DESCRIPTION

SIZE (if applicable)

6. A sample barcode for format is below:

COMFORTERS OG

9. Vendor must submit sample of your label for acceptability.

Figure 1