Statement_of_Work--SPECS.pdf

Specifications

Large Area Mower

NOTE: Specs must be met as a minimum

1. Equipment shall be furnished fully assembled, operational, and serviced.

2. Operators, Service, and Parts manuals for Mower must be supplied.

3. Mower must have a minimum cutting width of 192” with all decks in use and an adjustable cutting height of 1.0 to 6.0 in inches and adjustable in .5 inch increments. Must also have a cutting capacity of 21 acres or greater per hour. Must also have a fuel capacity of 29 gallons or greater.

4. Engine: Minimum 74hp, turbocharged diesel, liquid cooled, meeting tier 4 emissions. Must have auto reversing fan that is hydraulically controlled.

5. Transmission/Drive system: Hydro static full time auto 4wd is required via high torque hydraulic motors. Must meet a mowing speed of 11.0 mph minimum and a transport speed of 20 mph minimum.

6. Gauges: Must include fuel, coolant temperature, hour meter, oil pressure, hydraulic fluid level, tilt sensor, and battery charge indicator.

7. Hydraulics: 20 gallons reservoir minimum capacity, must have suction screen on tank and a 10 micron remote charge filter.

8. Cutting Decks: 3 required, rear discharging. Decks will be constructed out of 11 gauge heavy duty welded steel with 9 gauge baffles and stiffeners.

Decks will be driven by individual hydraulic motors with self-lubricating bearings. No Belts.

9. Safety and Lighting: Rops with is required as well as lighting to include, headlights, turn signal and brake lights at a minimum.