Specs.pdf

AMSC N/A Page 1 of 2 FSC 8455

INCH-POUND

MIL-DTL-1563/12B

6 January 2014

SUPERSEDING

MIL-B-1563/12A

30 April 1997

DETAIL SPECIFICATION SHEET

INSIGNIA, U.S.M.A., BUCKLE, WAISTPLATE

This specification is approved for use by all Departments and Agencies of the Department of Defense

The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-B-1563.

DASH NO.

-1: Top -2: Bottom

MATERIAL: Yellow Brass 65/35 (UNS Alloy C-268)

FINISH: Mirror-like Polish Fronts, Matte Finish back and edges.

MARKING FOR IDENTIFICATION: Back of buckle

MIL-DTL-1563/12B

DIMENSIONS:

HEIGHT:

-1: 2-3/16 inches + 1/64 inch (REF) -2: 2-7/32 inches+ 1/64 inch (REF)

WIDTH

-1: 3 inches + 1/64 inch (REF) -2: 1-5/8 inches + 1/64 inch (REF) THICKNESS: 0.080 inch + 0.002 inch

SUGGESTED PACKAGING: Standard Commercial:

1. UNIT PACKAGING: Each wrapped.

2. INTERMEDIATE PACKAGING: 50 waistplates per box.

WAISTPLATE:

1. Waistplates shall conform to the dimensions shown.

2. -1 shall be dapped to radius of 3-1/2 inches + 1/2 inch along the horizontal plane.

NOTE:

The term (REF) refers to measurements taken from the Government furnished hub or die.

CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.

Custodian: Preparing activity:

Army - IH Army - IH

Review activity: (Project No. 8455-2014-014)

DLA - CT

NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil.

AMSC N/A Page 1 of 2 FSC 8455

INCH-POUND

MIL-DTL-1563/13B

6 January 2014

SUPERSEDING

MIL-DTL-1563/13A

30 April 1997

DETAIL SPECIFICATION SHEET

INSIGNIA, U.S.M.A., BUCKLE, BREASTPLATE

This specification is approved for use by all Departments and Agencies of the Department of Defense

The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-B-1563.

MATERIAL: Yellow Brass 65/35 (UNS Alloy No. C-268)

FINISH: Mirror-like Polished Fronts, Matte Finish Back and Edges

MARKING FOR IDENTIFICATION: Back of Buckle

DEMENSION:

HEIGHT: 2-5/16 inches + 1/64 inch (REF) WIDTH: 2-7/16 inches + 1/64 inch (REF) THICKNESS: 0.050 inch + .002 inch

MIL-DTL-1563/13B

SUGGESTED PACKIGING: Standard Commercial UNIT PACKAGING: Each Wrapped.

INTERMEDIATE PACKAGING: 50 Breastplate per box.

BREASTPLATE:

1. Breastplate shall conform to the design and dimensions shown.

2. Breastplate shall be dapped as shown.

NOTE:

The term (REF) refers to the measurements taken from the Government furnished hub or die.

CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.

Custodian: Preparing activity:

Army - IH Army - IH

Review activity: (Project No. 8455-2014-015)

DLA - CT

NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil.