W911SD-22-Q-0002 SPECIFICATIONS--DEVIATIONS PLEBE-Uniform Buttons.pdf
PDF 96 KB Posted
- Solicitation number
- W911SD-22-Q-0002
About this file
This document contains a sources sought notice and specifications deviations for the procurement of PLEBE-Cadet Uniform Fastener Buttons, Insignia, and Findings by the Department of the Army Materiel Command Mission and Installation Contracting Command Fort Eustis. The Army desires to procure these items on a small business set-aside basis provided two or more qualified small businesses respond with sufficient information by January 22, 2022. The notice provides specifications and deviations for uniform buttons and requests interested parties provide company information, details of relevant past performance as a prime or subcontractor, certifications, pricing and delivery information, and recommendations to structure the procurement to facilitate small business competition. The anticipated NAICS code is 339993 for Uniform Fastener Buttons Manufacturing.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AMSAS-OMI-W
Deviations To
MIL-DTL-1563C (DTD 8 October 1997)
Buttons, Insignia and Findings (USMA)
1. Detail 5A, Insignia, USMA, Button, Ball 30 Ligne.
A) Change Note 4: From: Stems shall be swedged, hard or soft soldered to the back shell and symmetrically located as shown.
To: “Stems shall be swedged, epoxied or hard or soft soldered and symmetrically located as shown. Epoxy will be of a composition to sustain adhesion through 50 industrial dry cleanings.”
2. Detail 6A, Insignia, USMA, Button, 25 Ligne.
A) Change Note 4: From: Stems shall be swedged, hard or soft soldered to the back shell and symmetrically located as shown.
To: “Stems shall be swedged, epoxied or hard or soft soldered and symmetrically located as shown. Epoxy will be of a composition
3. Detail 7A, Insignia, USMA Button, 36 Ligne.
A) Change Note 2: From: The attaching device shall be stem and backshell type and shall conform to the dimensions shown above.
To: “The attaching device shall be stem and concave backshell type and shall conform to the dimensions shown above.”
B) Change Note 4: From: Stems shall be swedged, hard or soft soldered to the back shell and symmetrically located as shown.
To: “Stems shall be swedged, epoxied or hard or soft soldered and symmetrically located as shown. Epoxy will be of a composition
C) Change Note 5: Add: “7/32 inch or 0.56 cm.”
4. Detail 10A, Insignia, USMA Button, 30 Ligne.
A) Change Note 3: From: Stems shall be swedged, hard or soft soldered to the back shell and symmetrically located as shown.
To: “Stems shall be swedged, epoxied or hard or soft soldered and symmetrically located as shown. Epoxy will be of a composition to sustain adhesion through 50 industrial dry cleanings.”
B) Add Dash Numbers: Add: -1, ½” stem, Gold polished finish
Add: -2, ¼” stem, Nickel polished finish.
5. Detail 20A, Insignia, USMA, Ball, 30 Ligne with Tack Back.
A) Change Note 3: From: The tack back shall be swedged, hard or soft soldered to the back shell and symmetrically located as shown.
To: “The tack back shall be swedged, epoxied or hard or soft soldered and symmetrically located as shown. Epoxy will be of a composition to sustain adhesion through 50 industrial dry cleanings.”
File details come from the government source that posted it. Updated .