W911S7-23-Q-0004 - Final.pdf

SEE ADDENDUM

(No Collect Calls)

W911S723Q0004 08-Jun-2023

b. TELEPHONE NUMBER

573-596-7809

8. OFFER DUE DATE/LOCAL TIME

04:40 PM 10 Jul 2023

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W911S79. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

JOHN M. JOHNSON

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

0011758374

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

MICC - FORT LEONARD WOOD

8112 NEBRASKA AVENUE

FORT LEONARD WOOD MO 65473

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

5735960267FAX:

TEL: 5735960266 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

339113

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF107

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W911S723Q0004

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 200 Each Radio Vest, Chest Carry (Base Year)

FFP

Radio Vest, Chest Worn (Base Year), The radio vest harness is used to carry radios and small lifesaving components and have easy access for radios, knives, or even additional lifesaving materials while wearing the Level A and Level B suites in a Hazardous environment. Should be made of a mesh material for comfort and light of weight, less than 15 oz. Should have an inner pouch for maps and documents, adjustable for all portable/handheld radio sizes, should come with quick release buckles for easy off and on use, an elastic antenna support, and rugged construction for lifelong use. The item should be easily worn on the chest and not be too big, so the wearing is overcome by its size. Prefer black in color but is not a requirement.

This vest at a minimum will need to carry a handheld radio and have a spot for the microphone. Vest should come with adjustable straps so that one size fits all.

FOB: Destination

PURCHASE REQUEST NUMBER: 0011758374

PSC CD: 4240

NET AMT

0002 225 Each Cooling Vest (Base Year)

FFP

Cooling Vest, (Base Year). Cooling (vest) is used with Level A and B suits to keep HazMat Technician cools for up to 2- 3 hours, set at between 55 and 70 degrees.

Pouches inside the vest should be wider for more cooling power and the weight of the whole vest without packs should be somewhere between 6 and 7lbs. The material should be flame retardant thru 50 home or 25 industrial washes. The vest should have at least one 1 3/8ƒ?? Yellow gloss reflective tape: Horizontal stripe front and back with adjustable hook & loop straps to secure the vest to the individualƒ??s upper body.

FOB: Destination

0003 225 Set Ice Packs, Cooling (Base Year)

FFP

Ice Packs, (Base Year) must work for 2-3 hours and can be recharged by putting in a freezer and must fit the cooling vest requested on this contract.

FOB: Destination

0004 350 Each Gear Bag, Firefighter (Base Year)

FFP

Gear Bag, Firefighting, (Base Year). Firefighting bag must be able store HazMat suits, boots, gloves, helmets and other sundry items during training. These bags should be constructed of coated 100% polyester with heavy duty black webbing that goes completely around the bag for strength. Zippers must heavy duty, with two heavy duty sliders on the main compartment. Bags should have nylon stitching and are designed to last and stand up to rugged treatment. The bottom of the bag should be free of any type of platform and be just cloth. No specific color is required but red is currently being used. Best dimension to hold all the gear the students use would be 29" Long x 17" Wide x 16" Deep, and with at least four pockets along with the main storage area to separate equipment.

FOB: Destination

0005 400 Pair Gloves, Butyl, Size Small (Base Year)

FFP

Gloves, Butyl, Size 7/8 or small, (Base Year), The butyl glove should be made of a rubber material used in Splash or with a Hazardous material while wearing the Level A or B suits. Black is the common color but is not necessary if other colors are available at a lower cost. Should be at least 13 mil thick and have a rolled bead cuff.

FOB: Destination

0006 1,500 Pair Gloves, Butyl, Size Medium (Base Year)

FFP

Gloves, Butyl, Size 9 or medium, (Base Year), The butyl glove should be made of a rubber material used in Splash or with a Hazardous material while wearing the Level A or B suits. Black is the common color but is not necessary if other colors are available at a lower cost. Should be at least 13 mil thick and have a rolled bead cuff.

FOB: Destination

0007 2,500 Pair Gloves, Butyl, Size Large (Base Year)

FFP

Gloves, Butyl, Size 10 or Large, (Base Year), The butyl glove should be made of a rubber material used in Splash or with a Hazardous material while wearing the Level A or B suits. Black is the common color but is not necessary if other colors are available at a lower cost. Should be at least 13 mil thick and have a rolled bead cuff.

FOB: Destination

0008 1,250 Pair Gloves, Butyl, Size X-Large (Base Year)

FFP

Gloves, Butyl, Size 11 or Xtra Large, (Base Year), The butyl glove should be made of a rubber material used in Splash or with a Hazardous material while wearing the Level A or B suits. Black is the common color but is not necessary if other colors are available at a lower cost. Should be at least 13 mil thick and have a rolled bead cuff.

FOB: Destination

0009 500 Each Rescue Helmets (Base Year)

FFP

Rescue Helmet, must be made of Kevlar, lightweight and have a cradle harness system that can adjust to any size head. The helmet must have a 3 point chinstrap with quick release buckles and is adjustable. Helmet should have a 7 year lifespan.

Color needs to be red. Must meet or exceed NFPA 1951 and ANSI Z89.1 standards. (Base Year) FOB: Destination

0010 200 Pair Rope Rescue Gloves, Size Sm. (Base Year)

FFP

Rope Rescue Gloves, Size Small, (Base Year). Gloves should be made of synthetic leather except in the finger wear points and palm of the glove and those areas should be cowhide leather or equal for better wear. Gloves should be shaped to maximum protection and durability and should stretch like a spandex on the top and fingers for breathability and flexibility. These gloves should have pull tab and Velcro cuffs to secure gloves to the wearerƒ??s wrist. If the gloves come with a loop for easy carrying while not wearing them those loops must either be able to fit inside the glove or within the Velcro wrist strap during operations to prevent snagging while wearing them. Preferred color for the gloves is Tan FOB: Destination

0011 650 Pair Rope Rescue Gloves, Sz. Med. (Base Year)

FFP

Rope Rescue Gloves, Size Medium, (Base Year). Gloves should be made of synthetic leather except in the finger wear points and palm of the glove and those areas should be cowhide leather or equal for better wear. Gloves should be shaped to maximum protection and durability and should stretch like a spandex on the top and fingers for breathability and flexibility. These gloves should have pull tab and Velcro cuffs to secure gloves to the wearerƒ??s wrist. If the gloves come with a loop for easy carrying while not wearing them those loops must either be able to fit inside the glove or within the Velcro wrist strap during operations to prevent snagging while wearing them. Preferred color for the gloves is Tan FOB: Destination

0012 800 Pair Rope Rescue Gloves, Sz. Lrg. (Base Year)

FFP

Rope Rescue Gloves, Size Large, (Base Year). Gloves should be made of synthetic leather except in the finger wear points and palm of the glove and those areas should be cowhide leather or equal for better wear. Gloves should be shaped to maximum protection and durability and should stretch like a spandex on the top and fingers for breathability and flexibility. These gloves should have pull tab and Velcro cuffs to secure gloves to the wearerƒ??s wrist. If the gloves come with a loop for easy carrying while not wearing them those loops must either be able to fit inside the glove or within the Velcro wrist strap during operations to prevent snagging while wearing them. Preferred color for the gloves is Tan FOB: Destination

0013 450 Pair Rope Rescue Gloves, Sz. XL. (Base Year)

FFP

Rope Rescue Gloves, Size Xtra Large, (Base Year). Gloves should be made of synthetic leather except in the finger wear points and palm of the glove and those areas should be cowhide leather or equal for better wear. Gloves should be shaped to maximum protection and durability and should stretch like a spandex on the top and fingers for breathability and flexibility. These gloves should have pull tab and Velcro cuffs to secure gloves to the wearerƒ??s wrist. If the gloves come with a loop for easy carrying while not wearing them those loops must either be able to fit inside the glove or within the Velcro wrist strap during operations to prevent snagging while wearing them. Preferred color for the gloves is Tan FOB: Destination

0014 150 Pair Gloves, Extraction, Sz. Sm. (Base Year)

FFP

Fire Service Extraction Gloves, Size Small, (Base Year), Gloves should be rugged, flame resistant, especially on the back side (a must on the back side) and made of 100% Kevlar inner liner on the palm side. The outside on the palm of the glove should be made of some kind of synthetic leather shell with a flexible kangaroo type outer skin for exceptional grip for the user. The fingers must have Kevlar reinforcement on the back of the fingers for better protection. The gloves must have padding on the knuckle of the gloves for protection and have some kind of reflective strip on the glove for ease of identify them in the dark. The gloves must have at a minimum level 3 cut protection.

FOB: Destination

0015 450 Pair Gloves, Extraction, Sz. Med. (Base Year)

FFP

Fire Service Extraction Gloves, Size Medium, (Base Year), Gloves should be rugged, flame resistant, especially on the back side (a must on the back side) and made of 100% Kevlar inner liner on the palm side. The outside on the palm of the glove should be made of some kind of synthetic leather shell with a flexible kangaroo type outer skin for exceptional grip for the user. The fingers must have Kevlar reinforcement on the back of the fingers for better protection. The gloves must have padding on the knuckle of the gloves for protection and have some kind of reflective strip on the glove for ease of identify them in the dark. The gloves must have at a minimum level 3 cut protection.

FOB: Destination

0016 550 Pair Gloves, Extraction, Sz. Lrg. (Base Year)

FFP

Fire Service Extraction Gloves, Size Large, (Base Year), Gloves should be rugged, flame resistant, especially on the back side (a must on the back side) and made of 100% Kevlar inner liner on the palm side. The outside on the palm of the glove should be made of some kind of synthetic leather shell with a flexible kangaroo type outer skin for exceptional grip for the user. The fingers must have Kevlar reinforcement on the back of the fingers for better protection. The gloves must have padding on the knuckle of the gloves for protection and have some kind of reflective strip on the glove for ease of identify them in the dark. The gloves must have at a minimum level 3 cut protection.

FOB: Destination

0017 650 Pair Gloves, Extraction, Sz. XL. (Base Year)

FFP

Fire Service Extraction Gloves, Size Xtra Large, (Base Year), Gloves should be rugged, flame resistant, especially on the back side (a must on the back side) and made of 100% Kevlar inner liner on the palm side. The outside on the palm of the glove should be made of some kind of synthetic leather shell with a flexible kangaroo type outer skin for exceptional grip for the user. The fingers must have Kevlar reinforcement on the back of the fingers for better protection. The gloves must have padding on the knuckle of the gloves for protection and have some kind of reflective strip on the glove for ease of identify them in the dark. The gloves must have at a minimum level 3 cut protection.

FOB: Destination

0018 1,000 Pair Safety Glasses (Base Year)

FFP

Safety Glasses, (Base Year), Must meet or exceed ANSI Z87+ and CSA Z94.3 Standards. Must have clear lenses with black frames and be anti-fog. The Lense must wrap around at or past the corner of the user's eyes. Nose piece must be soft and conform to a variety of nose profiles and sizes. Glasses should have a way to permit the user to modify the angle to ensure proper fit and comfort.

FOB: Destination

0019 1,000 Pair Safety Glasses over Glasses (Base Year)

FFP

Safety Glasses over Prescription Glasses, (Base Year), The glasses must meet or exceed ANSI Z87.1 standards. They must have clear lenses with maximum protection coverage and should have a soft pliable brow guard to protect the individualƒ??s forehead. These glasses must have some kind of rubber at the temple area for comfort and keep the glasses from slipping as much during work in confine spaces or when the user gets sweaty during hot periods.

FOB: Destination

0020 1,000 Pair Safety Sunglasses (Base Year)

FFP

Safety Sunglasses (Base Year). These safety sunglasses must meet or exceed ANSI Z87.1+ - 2015 standards. Lens must be Dark Grey, to help our students see truer colors when working outside with high pressure/dangerous rescue equipment.

These lenses must be anti-fog and easy to replace if need be. Frames must be of a black or dark color and come with a lifetime guarantee. The sunglasses must have adjustable and flexible nose piece and a 3/4" or thicker high-performance frame is desirable.

FOB: Destination

0021 1,000 Pair Safety Sunglasses over Glasse(Base Year)

FFP

Safety Sunglasses over prescription Glasses (Base Year). These glasses must meet or exceed ANSI Z87 standards. These safety glasses should fit over most prescription glasses and have grey lenses for assisting students see colors better when working with dangerous equipment outside. The lens height should be 1.3ƒ??

or higher and the width should be 2.3ƒ?? or longer at the widest point. Total width of the glasses should measure no less that 5.5ƒ??. The frame should be of durable plastic and black frames are preferred.

FOB: Destination

0022 1,000 Pair Goggles, Rescue (Base Year)

FFP

Goggles, Rescue (Base Year), These goggles need to meet or exceed ANSI Z87.1 requirements. They need to have superior ventilations slots to ensure moisture inside the goggles can escape, reducing the amount of fogging when used in or around water like rain or during water rescues and should have tear off plastic sheets that fits over the lens so it can protect the lens and be torn off quickly in the event the lens surface gets covered by debris, dirt, or mud. Request the goggles come with some sort of stick-on/hook and loop pads to keep the straps in place while wearing their safety helmet.

FOB: Destination

0023 1,000 Pair Elbow Pads (Base Year)

FFP

Elbow Pads (Base Year), These elbow pads must be lightweight and flex and move the way your body moves. The outer shell must be in some kind of X-shape made of thermal plastic urethane and the inner padding must be made of a high-density foam for shock absorption and be able to wick away moisture; this will help relieve stress on the elbow during long periods in a confine space environment. It must have anti-skid inner surface to keep the elbow pad stable on the personƒ??s elbow during use. The elbow pads must have spandex adjustable straps with rapid deployment clips and hook and loop closer for secure fit. The elbow pad must be a one size fits all. Preferred color is black FOB: Destination

0024 1,000 Pair Knee Pads (Base Year)

FFP

Knee Pads, (Base Year), Knee pads should be made of a TPU and Cordura?? nylon construction, be lightweight and flexible/moves with your body. The outer shell must be in some kind of X-shape made of thermal plastic urethane. The inner padding must be made of a high-density foam for shock absorption and be able to wick away moisture; this will help relieve stress on the knee joint during long periods in a confine space environment. The knee pads must have spandex adjustable straps with rapid deployment clips and hook and loop closer for secure fit. These must have anti-skid inner surface to keep the knee pad stable on the personƒ??s knee These knee pads must be one size fits all and the preferred color is black.

FOB: Destination

0025 500 Each Head Lamp w/Strap for Helmet (Base Year)

FFP

Head Lamp w/Strap for Helmet. Must be lightweight and fit on the Safety Helmet on this contract. Must be a LED light and must be 80 lumens or greater. Battery operated, prefer AA batter operated if possible. Head Lamp must meet or exceed ATEX: Zone 2/22. (Base Year) FOB: Destination

0026 1,000 Each Kit Bag (Base Year)

FFP

Kit Bag/Rescue/Emergency Carry Bag. Bag must be durable and feature a main compartment that zips up and at least one other compartment that can be zipped up or velcroid shut. It must be 21"-25" Long, 11'-15" High and 11"-15" Wide. Color should be Black or Red. (Base Year) FOB: Destination

0027 450 Pair Gloves, Extraction, Sz. 2XL. (Base Year)

FFP

Fire Service Extraction Gloves, Size 2XL, (Base Year), Gloves should be rugged, flame resistant, especially on the back side (a must on the back side) and made of 100% Kevlar inner liner on the palm side. The outside on the palm of the glove should be made of some kind of synthetic leather shell with a flexible kangaroo type outer skin for exceptional grip for the user. The fingers must have Kevlar reinforcement on the back of the fingers for better protection. The gloves must have padding on the knuckle of the gloves for protection and have some kind of reflective strip on the glove for ease of identify them in the dark. The gloves must have at a minimum level 3 cut protection.

FOB: Destination

0028 350 Pair Gloves, Extraction, Sz. 3XL. (Base Year)

FFP

Fire Service Extraction Gloves, Size 3XL, (Base Year), Gloves should be rugged, flame resistant, especially on the back side (a must on the back side) and made of 100% Kevlar inner liner on the palm side. The outside on the palm of the glove should be made of some kind of synthetic leather shell with a flexible kangaroo type outer skin for exceptional grip for the user. The fingers must have Kevlar reinforcement on the back of the fingers for better protection. The gloves must have padding on the knuckle of the gloves for protection and have some kind of reflective strip on the glove for ease of identify them in the dark. The gloves must have at a minimum level 3 cut protection.

FOB: Destination

0029 200 Pair Gloves, Extraction, Sz. 4XL. (Base Year)

FFP

Fire Service Extraction Gloves, Size 4XL, (Base Year), Gloves should be rugged, flame resistant, especially on the back side (a must on the back side) and made of 100% Kevlar inner liner on the palm side. The outside on the palm of the glove should be made of some kind of synthetic leather shell with a flexible kangaroo type outer skin for exceptional grip for the user. The fingers must have Kevlar reinforcement on the back of the fingers for better protection. The gloves must have padding on the knuckle of the gloves for protection and have some kind of reflective strip on the glove for ease of identify them in the dark. The gloves must have at a minimum level 3 cut protection.

FOB: Destination

1001 200 Each Radio Vest, Chest Carry (1st Opt. Year)

FFP

Radio Vest, Chest Worn (1st Option Year), The radio vest harness is used to carry radios and small lifesaving components and have easy access for radios, knives, or even additional lifesaving materials while wearing the Level A and Level B suites in a Hazardous environment. Should be made of a mesh material for comfort and light of weight, less than 15 oz. Should have an inner pouch for maps and documents, adjustable for all portable/handheld radio sizes, should come with quick release buckles for easy off and on use, an elastic antenna support, and rugged construction for lifelong use. The item should be easily worn on the chest and not be too big, so the wearing is overcome by its size. Prefer black in color but is not a requirement. This vest at a minimum will need to carry a handheld radio and have a spot for the microphone. Vest should come with adjustable straps so that one size fits all.

FOB: Destination

1002 225 Each Cooling Vest (1st Option Year)

FFP

Cooling Vest, (1st Option Year). Cooling (vest) is used with Level A and B suits to keep HazMat Technician cools for up to 2- 3 hours, set at between 55 and 70 degrees. Pouches inside the vest should be wider for more cooling power and the weight of the whole vest without packs should be somewhere between 6 and 7lbs.

The material should be flame retardant thru 50 home or 25 industrial washes. The vest should have at least one 1 3/8ƒ?? Yellow gloss reflective tape: Horizontal stripe front and back with adjustable hook & loop straps to secure the vest to the individualƒ??s upper body.

FOB: Destination

1003 225 Set Ice Packs, Cooling (1st Option Year)

FFP

Ice Packs, (1st Option Year) must work for 2-3 hours and can be recharged by putting in a freezer and must fit the cooling vest requ ested on this contract.

FOB: Destination

1004 350 Each Gear Bag, Firefighter (1st Option Year)

FFP

Gear Bag, Firefighting, (1st Option Year). Firefighting bag must be able store HazMat suits, boots, gloves, helmets and other sundry items during training. These bags should be constructed of coated 100% polyester with heavy duty black webbing that goes completely around the bag for strength. Zippers must heavy duty, with two heavy duty sliders on the main compartment. Bags should have nylon stitching and are designed to last and stand up to rugged treatment. The bottom of the bag should be free of any type of platform and be just cloth. No specific color is required but red is currently being used. Best dimension to hold all the gear the students use would be 29" Long x 17" Wide x 16" Deep, and with at least four pockets along with the main storage area to separate equipment.

FOB: Destination

1005 400 Pair Gloves, Butyl, Size Small (1st Opt Year)

FFP

Gloves, Butyl, Size 7/8 or small, (1st Option Year), The butyl glove should be made of a rubber material used in Splash or with a Hazardous material while wearing the Level A or B suits. Black is the common color but is not necessary if other colors are available at a lower cost. Should be at least 13 mil thick and have a rolled bead cuff.

FOB: Destination

1006 1,500 Pair Gloves, Butyl, Size Medium (1st Opt Yr.)

FFP

Gloves, Butyl, Size 9 or medium, (1st Option Year), The butyl glove should be made of a rubber material used in Splash or with a Hazardous material while wearing the Level A or B suits. Black is the common color but is not necessary if other colors are available at a lower cost. Should be at least 13 mil thick and have a rolled bead cuff.

FOB: Destination

1007 2,500 Pair Gloves, Butyl, Size Large (1st Opt Year)

FFP

Gloves, Butyl, Size 10 or Large, (1st Option Year), The butyl glove should be made of a rubber material used in Splash or with a Hazardous material while wearing the Level A or B suits. Black is the common color but is not necessary if other colors are available at a lower cost. Should be at least 13 mil thick and have a rolled bead cuff.

FOB: Destination

1008 1,250 Pair Gloves, Butyl, Size X-Large (1st Opt Yr)

FFP

Gloves, Butyl, Size 11 or Xtra Large, (1st Option Year), The butyl glove should be made of a rubber material used in Splash or with a Hazardous material while wearing the Level A or B suits. Black is the common color but is not necessary if other colors are available at a lower cost. Should be at least 13 mil thick and have a rolled bead cuff.

FOB: Destination

1009 500 Each Rescue Helmets (1st Option Year)

FFP

Rescue Helmet, must be made of Kevlar, lightweight and have a cradle harness system that can adjust to any size head. The helmet must have a 3 point chinstrap with quick release buckles and is adjustable. Helmet should have a 7 year lifespan.

Color needs to be red. Must meet or exceed NFPA 1951 and ANSI Z89.1 standards. (1st Option Year) FOB: Destination

1010 200 Pair Rope Rescue Gloves, Size Sm. (1st Op Yr)

FFP

Rope Rescue Gloves, Size Small, (1st Option Year). Gloves should be made of synthetic leather except in the finger wear points and palm of the glove and those areas should be cowhide leather or equal for better wear. Gloves should be shaped to maximum protection and durability and should stretch like a spandex on the top and fingers for breathability and flexibility. These gloves should have pull tab and Velcro cuffs to secure gloves to the wearerƒ??s wrist. If the gloves come with a loop for easy carrying while not wearing them those loops must either be able to fit inside the glove or within the Velcro wrist strap during operations to prevent snagging while wearing them. Preferred color for the gloves is Tan FOB: Destination

1011 650 Pair Rope Rescue Gloves, Sz. Med. (1st Opt Y)

FFP

Rope Rescue Gloves, Size Medium, (1st Option Year). Gloves should be made of synthetic leather except in the finger wear points and palm of the glove and those areas should be cowhide leather or equal for better wear. Gloves should be shaped to maximum protection and durability and should stretch like a spandex on the top and fingers for breathability and flexibility. These gloves should have pull tab and Velcro cuffs to secure gloves to the wearerƒ??s wrist. If the gloves come with a loop for easy carrying while not wearing them those loops must either be able to fit inside the glove or within the Velcro wrist strap during operations to prevent snagging while wearing them. Preferred color for the gloves is Tan FOB: Destination

1012 800 Pair Rope Rescue Gloves, Sz. Lrg. (1st Opt Y)

FFP

Rope Rescue Gloves, Size Large, (1st Option Year). Gloves should be made of synthetic leather except in the finger wear points and palm of the glove and those areas should be cowhide leather or equal for better wear. Gloves should be shaped to maximum protection and durability and should stretch like a spandex on the top and fingers for breathability and flexibility. These gloves should have pull tab and Velcro cuffs to secure gloves to the wearerƒ??s wrist. If the gloves come with a loop for easy carrying while not wearing them those loops must either be able to fit inside the glove or within the Velcro wrist strap during operations to prevent snagging while wearing them. Preferred color for the gloves is Tan FOB: Destination

1013 450 Pair Rope Rescue Gloves, Sz. XL. (1st Opt Yr)

FFP

Rope Rescue Gloves, Size Extra Large, (1st Option Year). Gloves should be made of synthetic leather except in the finger wear points and palm of the glove and those areas should be cowhide leather or equal for better wear. Gloves should be shaped to maximum protection and durability and should stretch like a spandex on the top and fingers for breathability and flexibility. These gloves should have pull tab and Velcro cuffs to secure gloves to the wearerƒ??s wrist. If the gloves come with a loop for easy carrying while not wearing them those loops must either be able to fit inside the glove or within the Velcro wrist strap during operations to prevent snagging while wearing them. Preferred color for the gloves is Tan FOB: Destination

1014 150 Pair Gloves, Extraction, Sz. Sm. (1st Opt Yr)

FFP

Fire Service Extraction Gloves, Size Small, (1st Option Year), Gloves should be rugged, flame resistant, especially on the back side (a must on the back side) and made of 100% Kevlar inner liner on the palm side. The outside on the palm of the glove should be made of some kind of synthetic leather shell with a flexible kangaroo type outer skin for exceptional grip for the user. The fingers must have Kevlar reinforcement on the back of the fingers for better protection. The gloves must have padding on the knuckle of the gloves for protection and have some kind of reflective strip on the glove for ease of identify them in the dark. The gloves must have at a minimum level 3 cut protection.

FOB: Destination

1015 450 Pair Gloves, Extraction, Sz. Med. (1st Opt Y)

FFP

Fire Service Extraction Gloves, Size Medium, (1st Option Year), Gloves should be rugged, flame resistant, especially on the back side (a must on the back side) and made of 100% Kevlar inner liner on the palm side. The outside on the palm of the glove should be made of some kind of synthetic leather shell with a flexible kangaroo type outer skin for exceptional grip for the user. The fingers must have Kevlar reinforcement on the back of the fingers for better protection. The gloves must have padding on the knuckle of the gloves for protection and have some kind of reflective strip on the glove for ease of identify them in the dark. The gloves must have at a minimum level 3 cut protection.

FOB: Destination

1016 550 Pair Gloves, Extraction, Sz. Lrg. (1st Opt Y)

FFP

Fire Service Extraction Gloves, Size Large, (1st Option Year), Gloves should be rugged, flame resistant, especially on the back side (a must on the back side) and made of 100% Kevlar inner liner on the palm side. The outside on the palm of the glove should be made of some kind of synthetic leather shell with a flexible kangaroo type outer skin for exceptional grip for the user. The fingers must have Kevlar reinforcement on the back of the fingers for better protection. The gloves must have padding on the knuckle of the gloves for protection and have some kind of reflective strip on the glove for ease of identify them in the dark. The gloves must have at a minimum level 3 cut protection.

FOB: Destination

1017 650 Pair Gloves, Extraction, Sz. XL. (1st Opt Yr)

FFP

Fire Service Extraction Gloves, Size Xtra Large, (1st Option Year), Gloves should be rugged, flame resistant, especially on the back side (a must on the back side) and made of 100% Kevlar inner liner on the palm side. The outside on the palm of the glove should be made of some kind of synthetic leather shell with a flexible kangaroo type outer skin for exceptional grip for the user. The fingers must have Kevlar reinforcement on the back of the fingers for better protection. The gloves must have padding on the knuckle of the gloves for protection and have some kind of reflective strip on the glove for ease of identify them in the dark. The gloves must have at a minimum level 3 cut protection.

FOB: Destination

1018 1,000 Pair Safety Glasses (1st Option Year)

FFP

Safety Glasses, (1st Option Year), Must meet or exceed ANSI Z87+ and CSA Z94.3 Standards. Must have clear lenses with black frames and be anti-fog. The Lense must wrap around at or past the corner of the user's eyes. Nose piece must be soft and conform to a variety of nose profiles and sizes. Glasses should have a way to permit the user to modify the angle to ensure proper fit and comfort.

FOB: Destination

1019 1,000 Pair Safety Glasses over Glasses (1st Opt Yr)

FFP

Safety Glasses over Prescription Glasse, (1st Option Year), The glasses must meet or exceed ANSI Z87.1 standards. They must have clear lenses with maximum protection coverage and should have a soft pliable brow guard to protect the individualƒ??s forehead. These glasses must have some kind of rubber at the temple area for comfort and keep the glasses from slipping as much during work in confine spaces or when the user gets sweaty during hot periods.

FOB: Destination

1020 1,000 Pair Safety Sunglasses (1st Option Year)

FFP

Safety Sunglasses (1st Option Year). These safety sunglasses must meet or exceed ANSI Z87.1+ - 2015 standards. Lens must be Dark Grey, to help our students see truer colors when working outside with high pressure/dangerous rescue equipment.

These lenses must be anti-fog and easy to replace if need be. Frames must be of a black or dark color and come with a lifetime guarantee. The sunglasses must have adjustable and flexible nose piece and a 3/4" or thicker high-performance frame is desirable.

FOB: Destination

1021 1,000 Pair Safety Sunglasses over Glasse(1st Opt Y)

FFP

Safety Sunglasses over prescription Glasses (1st Option Year). These glasses must meet or exceed ANSI Z87 standards. These safety glasses should fit over most prescription glasses and have grey lenses for assisting students see colors better when working with dangerous equipment outside. The lens height should be 1.3ƒ?? or higher and the width should be 2.3ƒ?? or longer at the widest point.

Total width of the glasses should measure no less that 5.5ƒ??. The frame should be of durable plastic and black frames are preferred.

FOB: Destination

1022 1,000 Pair Goggles, Rescue (1st Option Year)

FFP

Goggles, Rescue (1st Option Year), These goggles need to meet or exceed ANSI Z87.1 requirements. They need to have superior ventilations slots to ensure moisture inside the goggles can escape, reducing the amount of fogging when used in or around water like rain or during water rescues and should have tear off plastic sheets that fits over the lens so it can protect the lens and be torn off quickly in the event the lens surface gets covered by debris, dirt, or mud. Request the goggles come with some sort of stick-on/hook and loop pads to keep the straps in place while wearing their safety helmet.

FOB: Destination

1023 1,000 Pair Elbow Pads (1st Option Year)

FFP

Elbow Pads (1st Option Year), These elbow pads must be lightweight and flex and move the way your body moves. The outer shell must be in some kind of X-shape made of thermal plastic urethane and the inner padding must be made of a high-density foam for shock absorption and be able to wick away moisture; this will help relieve stress on the elbow during long periods in a confine space environment. It must have anti-skid inner surface to keep the elbow pad stable on the personƒ??s elbow during use. The elbow pads must have spandex adjustable straps with rapid deployment clips and hook and loop closer for secure fit. The elbow pad must be a one size fits all. Preferred color is black.

FOB: Destination

1024 1,000 Pair Knee Pads (1st Option Year)

FFP

Knee Pads, (1st Option Year), Knee pads should be made of a TPU and Cordura??

nylon construction, be lightweight and flexible/moves with your body. The outer shell must be in some kind of X-shape made of thermal plastic urethane. The inner padding must be made of a high-density foam for shock absorption and be able to wick away moisture; this will help relieve stress on the knee joint during long periods in a confine space environment. The knee pads must have spandex adjustable straps with rapid deployment clips and hook and loop closer for secure fit. These must have anti-skid inner surface to keep the knee pad stable on the personƒ??s knee These knee pads must be one size fits all and the preferred color is black.

FOB: Destination

1025 500 Each Head Lamp w/Strap for Helmet (1st Opt Y)

FFP

Head Lamp w/Strap for Helmet. Must be lightweight and fit on the Safety Helmet on this contract. Must be a LED light and must be 80 lumens or greater. Battery operated, prefer AA batter operated if possible. Head Lamp must meet or exceed ATEX: Zone 2/22. (1st Option Year) FOB: Destination

1026 1,000 Each Kit Bag (1st Option Year)

FFP

Kit Bag/Rescue/Emergency Carry Bag. Bag must be durable and feature a main compartment that zips up and at least one other compartment that can be zipped up or velcroid shut. It must be 21"-25" Long, 11'-15" High and 11"-15" Wide. Color should be Black or Red. (1st Option Year) FOB: Destination

1027 450 Pair Gloves, Extraction, Sz. 2XL. (1st Opt Y)

FFP

Fire Service Extraction Gloves, Size 2XL, (1st Option Year), Gloves should be rugged, flame resistant, especially on the back side (a must on the back side) and made of 100% Kevlar inner liner on the palm side. The outside on the palm of the glove should be made of some kind of synthetic leather shell with a flexible kangaroo type outer skin for exceptional grip for the user. The fingers must have Kevlar reinforcement on the back of the fingers for better protection. The gloves must have padding on the knuckle of the gloves for protection and have some kind of reflective strip on the glove for ease of identify them in the dark. The gloves must have at a minimum level 3 cut protection.

FOB: Destination

1028 350 Pair Gloves, Extraction, Sz. 3XL. (1st Opt Y)

FFP

Fire Service Extraction Gloves, Size 3XL, (1st Option Year), Gloves should be rugged, flame resistant, especially on the back side (a must on the back side) and made of 100% Kevlar inner liner on the palm side. The outside on the palm of the glove should be made of some kind of synthetic leather shell with a flexible kangaroo type outer skin for exceptional grip for the user. The fingers must have Kevlar reinforcement on the back of the fingers for better protection. The gloves must have padding on the knuckle of the gloves for protection and have some kind of reflective strip on the glove for ease of identify them in the dark. The gloves must have at a minimum level 3 cut protection.

FOB: Destination

1029 200 Pair Gloves, Extraction, Sz. 4XL. (1st Opt Y)

FFP

Fire Service Extraction Gloves, Size 4XL, (1st Option Year), Gloves should be rugged, flame resistant, especially on the back side (a must on the back side) and made of 100% Kevlar inner liner on the palm side. The outside on the palm of the glove should be made of some kind of synthetic leather shell with a flexible kangaroo type outer skin for exceptional grip for the user. The fingers must have Kevlar reinforcement on the back of the fingers for better protection. The gloves must have padding on the knuckle of the gloves for protection and have some kind of reflective strip on the glove for ease of identify them in the dark. The gloves must have at a minimum level 3 cut protection.

FOB: Destination

2001 200 Each Radio Vest, Chest Carry (2nd Opt. Year)

FFP

Radio Vest, Chest Worn (2nd Option Year), The radio vest harness is used to carry radios and small lifesaving components and have easy access for radios, knives, or even additional lifesaving materials while wearing the Level A and Level B suites in a Hazardous environment. Should be made of a mesh material for comfort and light of weight, less than 15 oz. Should have an inner pouch for maps and documents, adjustable for all portable/handheld radio sizes, should come with quick release buckles for easy off and on use, an elastic antenna support, and rugged construction for lifelong use. The item should be easily worn on the chest and not be too big, so the wearing is overcome by its size. Prefer black in color but is not a requirement. This vest at a minimum will need to carry a handheld radio and have a spot for the microphone. Vest should come with adjustable straps so that one size fits all.

FOB: Destination

2002 225 Each Cooling Vest (2nd Option Year)

FFP

Cooling Vest, (2nd Option Year). Cooling (vest) is used with Level A and B suits to keep HazMat Technician cools for up to 2- 3 hours, set at between 55 and 70 degrees. Pouches inside the vest should be wider for more cooling power and the weight of the whole vest without packs should be somewhere between 6 and 7lbs.

The material should be flame retardant thru 50 home or 25 industrial washes. The vest should have at least one 1 3/8ƒ?? Yellow gloss reflective tape: Horizontal stripe front and back with adjustable hook & loop straps to secure the vest to the individualƒ??s upper body.

FOB: Destination

2003 225 Set Ice Packs, Cooling (2nd Option Year)

FFP

Ice Packs, (2nd Option Year) must work for 2-3 hours and can be recharged by putting in a freezer and must fit the cooling vest requ ested on this contract.

FOB: Destination

2004 350 Each Gear Bag, Firefighter (2nd Option Year)

FFP

Gear Bag, Firefighting, (2nd Option Year). Firefighting bag must be able store HazMat suits, boots, gloves, helmets and other sundry items during training. These bags should be constructed of coated 100% polyester with heavy duty black webbing that goes completely around the bag for strength. Zippers must heavy duty, with two heavy duty sliders on the main compartment. Bags should have nylon stitching and are designed to last and stand up to rugged treatment. The bottom of the bag should be free of any type of platform and be just cloth. No specific color is required but red is currently being used. Best dimension to hold all the gear the students use would be 29" Long x 17" Wide x 16" Deep, and with at least four pockets along with the main storage area to separate equipment.

FOB: Destination

2005 400 Pair Gloves, Butyl, Size Small (2nd Opt Year)

FFP

Gloves, Butyl, Size 7/8 or small, (2nd Option Year), The butyl glove should be made of a rubber material used in Splash or with a Hazardous material while wearing the Level A or B suits. Black is the common color but is not necessary if other colors are available at a lower cost. Should be at least 13 mil thick and have a rolled bead cuff.

FOB: Destination

2006 1,500 Pair Gloves, Butyl, Size Medium (2nd Opt Yr.)

FFP

Gloves, Butyl, Size 9 or medium, (2nd Option Year), The butyl glove should be made of a rubber material used in Splash or with a Hazardous material while wearing the Level A or B suits. Black is the common color but is not necessary if other colors are available at a lower cost. Should be at least 13 mil thick and have a rolled bead cuff.

FOB: Destination

2007 2,500 Pair Gloves, Butyl, Size Large (2nd Opt Year)

FFP

Gloves, Butyl, Size 10 or Large, (2nd Option Year), The butyl glove should be made of a rubber material used in Splash or with a Hazardous material while wearing the Level A or B suits. Black is the common color but is not necessary if other colors are available at a lower cost. Should be at least 13 mil thick and have a rolled bead cuff.

FOB: Destination

2008 1,250 Pair Gloves, Butyl, Size X-Large (2nd Opt Yr)

FFP

Gloves, Butyl, Size 11 or Xtra Large, (2nd Option Year), The butyl glove should be made of a rubber material used in Splash or with a Hazardous material while wearing the Level A or B suits. Black is the common color but is not necessary if other colors are available at a lower cost. Should be at least 13 mil thick and have a rolled bead cuff.

FOB: Destination

2009 500 Each Rescue Helmets (2nd Option Year)

FFP

Rescue Helmet, must be made of Kevlar, lightweight and have a cradle harness system that can adjust to any size head. The helmet must have a 3 point chinstrap with quick release buckles and is adjustable. Helmet should have a 7 year lifespan.

Color needs to be red. Must meet or exceed NFPA 1951 and ANSI Z89.1 standards. (2nd Option Year) FOB: Destination

2010 200 Pair Rope Rescue Gloves, Size Sm. (2nd Op Yr)

FFP

Rope Rescue Gloves, Size Small, (2nd Option Year). Gloves should be made of synthetic leather except in the finger wear points and palm of the glove and those areas should be cowhide leather or equal for better wear. Gloves should be shaped to maximum protection and durability and should stretch like a spandex on the top and fingers for breathability and flexibility. These gloves should have pull tab and Velcro cuffs to secure gloves to the wearerƒ??s wrist. If the gloves come with a loop for easy carrying while not wearing them those loops must either be able to fit inside the glove or within the Velcro wrist strap during operations to prevent snagging while wearing them. Preferred color for the gloves is Tan FOB: Destination

2011 650 Pair Rope Rescue Gloves, Sz. Med. (2nd Opt Y)

FFP

Rope Rescue Gloves, Size Medium, (2nd Option Year). Gloves should be made of synthetic leather except in the finger wear points and palm of the glove and those areas should be cowhide leather or equal for better wear. Gloves should be shaped to maximum protection and durability and should stretch like a spandex on the top and fingers for breathability and flexibility. These gloves should have pull tab and Velcro cuffs to secure gloves to the wearerƒ??s wrist. If the gloves come with a loop for easy carrying while not wearing them those loops must either be able to fit inside the glove or within the Velcro wrist strap during operations to prevent snagging while wearing them. Preferred color for the gloves is Tan FOB: Destination

2012 800 Pair Rope Rescue Gloves, Sz. Lrg. (2nd Opt Y)

FFP

Rope Rescue Gloves, Size Large, (2nd Option Year). Gloves should be made of synthetic leather except in the finger wear points and palm of the glove and those areas should be cowhide leather or equal for better wear. Gloves should be shaped to maximum protection and durability and should stretch like a spandex on the top and fingers for breathability and flexibility. These gloves should have pull tab and Velcro cuffs to secure gloves to the wearerƒ??s wrist. If the gloves come with a loop for easy carrying while not wearing them those loops must either be able to fit inside the glove or within the Velcro wrist strap during operations to prevent snagging while wearing them. Preferred color for the gloves is Tan FOB: Destination

2013 450 Pair Rope Rescue Gloves, Sz. X-Lrg. (2nd Opt)

FFP

Rope Rescue Gloves, Size Extra Large, (2nd Option Year). Gloves should be made of synthetic leather except in the finger wear points and palm of the glove and those areas should be cowhide leather or equal for better wear. Gloves should be shaped to maximum protection and durability and should stretch like a spandex on the top and fingers for breathability and flexibility. These gloves should have pull tab and Velcro cuffs to secure gloves to the wearerƒ??s wrist. If the gloves come with a loop for easy carrying while not wearing them those loops must either be able to fit inside the glove or within the Velcro wrist strap during operations to prevent snagging while wearing them. Preferred color for the gloves is Tan FOB: Destination

2014 150 Pair Gloves, Extraction, Sz. Sm. (2nd Opt Yr)

FFP

Fire Service Extraction Gloves, Size Small, (2nd Option Year), Gloves should be rugged, flame resistant, especially on the back side (a must on the back side) and made of 100% Kevlar inner liner on the palm side. The outside on the palm of the glove should be made of some kind of synthetic leather shell with a flexible kangaroo type outer skin for exceptional grip for the user. The fingers must have Kevlar reinforcement on the back of the fingers for better protection. The gloves must have padding on the knuckle of the gloves for protection and have some kind of reflective strip on the glove for ease of identify them in the dark. The gloves must have at a minimum level 3 cut protection.

FOB: Destination

2015 450 Pair Gloves, Extraction, Sz. Med. (2nd Opt Y)

FFP

Fire Service Extraction Gloves, Size Medium, (2nd Option Year), Gloves should be rugged, flame resistant, especially on the back side (a must on the back side) and made of 100% Kevlar inner liner on the palm side. The outside on the palm of the glove should be made of some kind of synthetic leather shell with a flexible kangaroo type outer skin for exceptional grip for the user. The fingers must have Kevlar reinforcement on the back of the fingers for better protection. The gloves must have padding on the knuckle of the gloves for protection and have some kind of reflective strip on the glove for ease of identify them in the dark. The gloves must have at a minimum level 3 cut protection.

FOB: Destination

2016 550 Pair Gloves, Extraction, Sz. Lrg. (2nd Opt Y)

FFP

Fire Service Extraction Gloves, Size Large, (2nd Option Year), Gloves should be rugged,…